hathach
752aea7d72
enhance samg
2019-12-09 23:58:13 +07:00
hathach
fa96078882
clear data toggle in clear stall, also set config bit
2019-12-09 23:21:06 +07:00
hathach
75a2157715
fix samd using TUSB_REQ_SET_ADDRESS in dcd_edpt0_status_complete
2019-12-09 23:20:21 +07:00
hathach
0316e0ecd4
update descriptor, enhance ep in transfer
2019-12-09 22:48:35 +07:00
hathach
759fa76280
implementing dcd_edpt_open
2019-12-09 21:36:15 +07:00
hathach
988edce745
fix build
2019-12-09 18:49:38 +07:00
hathach
208a77678c
clean up, switch and update submodule samd to circuitpython branch
2019-12-09 18:37:54 +07:00
hathach
e9725dcdbe
use dcd_edpt0_status_complete() to prepare for setup packet for samd21/samd51
2019-11-28 13:48:55 +07:00
hathach
d7558e8a0f
use dcd_edpt0_status_complete() to set address without blocking for samd21/samd51/stm32_fsdev
2019-11-28 13:39:29 +07:00
hathach
ac701c398b
clean up
2019-11-28 12:18:56 +07:00
hathach
552cc3ef33
implement dcd_edpt_stall
2019-11-28 11:56:35 +07:00
hathach
5dc04887e2
get passed set address
2019-11-28 11:48:08 +07:00
hathach
6bc245cb36
add dcd_edpt0_status_complete() which is useful for several mcu port
2019-11-28 11:46:36 +07:00
hathach
40b454cf28
get passed first get device descriptor
2019-11-27 23:20:48 +07:00
hathach
6225d5bcfd
able to handle setup packet
2019-11-27 16:01:25 +07:00
hathach
bc21714c7e
detect bus reset
2019-11-27 14:49:19 +07:00
hathach
302746d02c
Merge branch 'develop' into port-samg55
2019-11-27 12:35:59 +07:00
hathach
fe1eadf177
fix #229
2019-11-27 12:34:30 +07:00
hathach
8a1b6327ba
extract code to invoke_class_control()
...
- also rename usbd_class_drivers to _usbd_driver
2019-11-27 12:12:52 +07:00
hathach
745f0b4521
clean up
2019-11-27 11:02:24 +07:00
hathach
c691dc4cb2
update
2019-11-25 10:42:32 +07:00
hathach
58e8265964
usb hw init OK
2019-11-24 23:46:28 +07:00
hathach
24b2cea139
Merge branch 'master' into port-samg55
2019-11-24 21:22:42 +07:00
hathach
d991466a8e
fix rt1010 rt1020 only has 1 usb controller, rt1050 rt1060 has 2
2019-11-23 00:48:56 +07:00
hathach
38b14725f7
rename OPT_MCU_IMXRT10XX to OPT_MCU_MIMXRT10XX
2019-11-22 17:40:12 +07:00
hathach
281e8cd9ec
rename OPT_MCU_RT10XX to OPT_MCU_IMXRT10XX
2019-11-22 15:42:46 +07:00
Ha Thach
ca741dfc2a
Merge pull request #220 from hathach/develop
...
Port NXP iMX RT10XX
2019-11-22 15:16:41 +07:00
hathach
6123b600fc
rename dcd_lpc18_43 to dcd_transdimension
2019-11-22 14:47:07 +07:00
hathach
a0b2561a2d
move nxp dcd ehci controller reset and modde into dcd
...
rt1064 work with cdc msc example
2019-11-22 14:20:10 +07:00
hathach
fca4653b95
able to compile dcd 18/43 with rt1064
2019-11-22 12:34:41 +07:00
hathach
2ead26a12d
more clean up
2019-11-22 12:26:40 +07:00
hathach
ccb09db3b7
more clean up
2019-11-22 12:16:47 +07:00
hathach
7e16a9a1db
more constant rename clean up
2019-11-22 12:14:55 +07:00
hathach
8aacd1eacd
refactor dcd_lpc18_43, making it capatible with rt10xx
2019-11-22 12:11:13 +07:00
hathach
623b16af2e
clean up dcd lpc18_43
...
drop supporting both device mode on both ports.
2019-11-22 00:58:18 +07:00
hathach
1f52273d99
move dcd_lpc18_43.h into .c file
2019-11-22 00:38:22 +07:00
hathach
03deeea465
fix segger host example
2019-11-22 00:33:10 +07:00
hathach
f5d737aa7e
moving irq to bsp for lpc17/40
2019-11-21 23:19:38 +07:00
hathach
bbec47b647
adding tud_isr/tuh_isr with lpc18/43
2019-11-21 22:20:30 +07:00
hathach
043697ab95
rename lpc 17/18 irq to dcd_isr/hcd_isr
2019-11-21 16:08:08 +07:00
Sean Cross
a9282eab51
eptri: clear proper endpoint when opening IN port
...
When opening a USB port, we ensure the buffer is NULL and has
a length of 0.
Due to a mistake in specifying the endpoint type, we never actually
cleared the value when opening an IN endpoint. This patch fixes
the comparison when opening an IN endpoint.
This fixes issue #218 .
Signed-off-by: Sean Cross <sean@xobs.io>
2019-11-20 17:45:21 +08:00
hathach
1aa3f085cb
adding support for NXP rt1064 evk board, boad test led + sw8 work.
...
LTO is temporary disabled
2019-11-20 15:30:39 +07:00
hathach
c2fb813658
Merge pull request #217 from xobs/valentyusb-eptri
...
WIP: Add Valentyusb eptri
2019-11-18 12:37:34 +07:00
hathach
56abce44f3
Merge pull request #208 from hathach/fix-issue-207
...
Fix issue 207
2019-11-14 10:10:42 +07:00
Sean Cross
cc73990530
tusb: rename foosn to valentyusb
...
Use the name `valentyusb` as the vendor for the `valentyusb`
project, rather than the manufacturer name of the Fomu device.
This is because the `valentyusb` core can be used across multiple
vendors, much like how other cores can be used across chip vendors.
Signed-off-by: Sean Cross <sean@xobs.io>
2019-11-13 09:08:47 -08:00
Sean Cross
8c5f02960b
valentyusb: rename from foosn
...
While Fomu is produced by Foosn, the actual name of the hardware
block is `valentyusb`. Rename the module to match that.
Signed-off-by: Sean Cross <sean@xobs.io>
2019-11-13 09:08:47 -08:00
Sean Cross
e05e9801e4
fomu: gate debug/logging features
...
This gates the majority of the debug and logging features behind
testable macros.
Signed-off-by: Sean Cross <sean@xobs.io>
2019-11-13 09:08:47 -08:00
Sean Cross
3292920933
fomu: first stable working commit
...
This appears to be stable, and works well.
Signed-off-by: Sean Cross <sean@xobs.io>
2019-11-13 09:08:47 -08:00
Sean Cross
1882a87212
fomu: remove reference to SETUP_CTRL.ACK
...
THis bit isn't used anymore, so remove it.
Signed-off-by: Sean Cross <sean@xobs.io>
2019-11-13 09:08:47 -08:00
Sean Cross
729c8d073c
fomu: dcd_fomu: add next_ev support
...
Now that we have the `USB_NEXT_EV` register, take advantage of
it to work around issue #207 .
Signed-off-by: Sean Cross <sean@xobs.io>
2019-11-13 09:09:38 -08:00
