hathach
772edf879b
fix iar build
2024-11-06 22:13:05 +07:00
hathach
e5c26924ed
update bsp for f7
2024-11-06 21:46:18 +07:00
hathach
fe79a93594
implement split for slave, got mouse working
2024-11-06 12:09:32 +07:00
hathach
fbc193647a
split interrupt work with fs mouse
2024-11-05 16:26:56 +07:00
hathach
372db1e19a
implement split transaction, got control working
2024-11-05 10:37:39 +07:00
hathach
5f891e020c
usbh use the new tusb_time_delay_ms_api()
...
fix duplicated device attach for some devices which cause "USBH Defer Attach until current enumeration complete"
include dev0 for tuh_edpt_abort_xfer()
2024-11-04 17:24:49 +07:00
hathach
29262f3e24
improve port0_enable(), properly configure hcfg and hfir according to port speed. Enable low power UTMI+ phy mode for ls/fs device.
2024-11-04 17:22:25 +07:00
hathach
80ad7c4e87
add tusb_time_millis_api() and default/weak tusb_time_delay_ms_api(). Which is required for host and some device without RTOS.
2024-11-04 17:20:58 +07:00
hathach
5d6d905cb0
got interrupt in working with slave
2024-11-02 20:20:27 +07:00
hathach
a0f75e5b67
fix slave in nak & ack order
2024-11-02 00:20:40 +07:00
hathach
c96e04159e
implement periodic endpoint using sof
2024-11-01 21:31:01 +07:00
hathach
4f288c030a
move buffer and buflen to hcd_endpoint_t to support periodic endpoint
2024-11-01 20:58:29 +07:00
hathach
b1182de872
clean up is_period
2024-11-01 19:04:32 +07:00
hathach
b7ff10f59c
rename and add both CFG_TUH_DWC2_SLAVE_ENABLE/CFG_TUH_DWC2_DMA_ENABLE better out dma handle
2024-11-01 17:54:10 +07:00
hathach
4c8ce9733a
dma host work well with bulk/control
2024-11-01 16:55:12 +07:00
hathach
f7f80e844c
do ping for slave out when nak/nyet
2024-10-31 23:22:49 +07:00
hathach
9afa64014c
testing hcd with dma, work well after enumeration.
2024-10-31 21:37:57 +07:00
hathach
9897a36ac4
fix f7 ci build
2024-10-31 12:11:47 +07:00
hathach
92e7ac6c23
fix bulk out and txfifo_empty(), should not rely on hcchar_bm.ep_size for OUT. msc explorer seems to work well.
2024-10-31 10:50:09 +07:00
hathach
80d8157048
handle out nak slave -> halted -> retry transfer
2024-10-30 18:11:41 +07:00
hathach
3c1cb0e08f
correct the fifo_available comparison (words not byte)
2024-10-29 22:48:58 +07:00
hathach
616b5770f2
fix pid token calculation, implement hcd_edpt_clear_stall(). msc explorer example read work, but write10 still wip
2024-10-29 21:54:21 +07:00
hathach
074811c251
refactor channel_send_in_token(), support IN token for multiple transaction per transfer
2024-10-29 19:08:45 +07:00
hathach
df55d587df
update handle in/out, separate allocated and xfer result to make it easier to manage. Fix channel disable/deallocated.
2024-10-29 18:23:56 +07:00
hathach
1e164412bf
split handle channel slave out/in
2024-10-29 16:06:44 +07:00
hathach
cef9bab4b5
minor clean up
2024-10-29 15:07:28 +07:00
hathach
4797c4f508
fix nptx fifo empty handling
2024-10-29 14:47:44 +07:00
hathach
c93d3eda5f
restructure, add hcd endpoint, xfer to minimize footprint for managing xfer.
2024-10-29 13:01:48 +07:00
hathach
f953b6bf92
minor rename
2024-10-28 18:40:21 +07:00
hathach
dd99da9dce
implement hcd_edpt_abort_xfer, hcd_device_close,
...
check request queue available before making usb attempt. Though there is no handling when queue is full.
device_info example work well
2024-10-28 17:45:44 +07:00
hathach
79c0a249e8
got In transfer working, able to get 1st device descriptor and set address
2024-10-25 22:56:25 +07:00
hathach
77fa2f6701
fix make build
2024-10-25 19:27:09 +07:00
hathach
07abc722b6
hcd able to send setup packet
2024-10-25 19:00:45 +07:00
hathach
063661e3a3
more progress on dwc2 hcd, initial code for edpt xfer
2024-10-25 00:20:34 +07:00
hathach
8461525d48
add tusb_time_millis(), able to reset and enable dwc2 port and get SOF active
2024-10-21 18:18:33 +07:00
hathach
f5978876d2
get hprt interrupt triggered
2024-10-21 11:43:37 +07:00
hathach
61b33ca926
testing hcd with f723 due to h743eval issue with mfx vbus drive.
2024-10-18 22:16:21 +07:00
hathach
42b6f30eda
add VBUS drive via MFX for h743 eval, but does not seems to work yet
2024-10-18 18:33:50 +07:00
hathach
b5a4f18879
get hpri triggered
2024-10-17 15:56:12 +07:00
hathach
8d9d3d9a2a
move gahbcfg/gintmsk with dma to dwc2 common
2024-10-16 13:19:28 +07:00
hathach
4012e15075
move core init code to dwc2 common. update/correct build for esppressif
2024-10-15 17:55:24 +07:00
hathach
10a3aa3cc8
adding hcd dwc2
2024-10-15 13:03:12 +07:00
Ha Thach
933ac29d77
Merge pull request #2836 from hathach/more-tusb_init()
...
change tusb_init() to use init struct
2024-10-14 21:38:45 +07:00
hathach
e83e08343a
change dcd_init() return from void to bool
2024-10-14 19:42:22 +07:00
hathach
1f18be93db
change the tusb_rhport_init_t struct, exclude the rhport to make API more consistent
2024-10-14 18:27:52 +07:00
hathach
1587d48e89
hcd_init() take init struct
2024-10-11 17:53:39 +07:00
hathach
f3b7d7515e
fix fuzzing build
2024-10-11 16:00:51 +07:00
hathach
d997f0071e
change dcd_init() to take rhport struct
2024-10-11 15:31:49 +07:00
hathach
92602b9de3
change tusb_init(), tusb_rhport_init() to use init struct for expandability
2024-10-11 13:41:53 +07:00
Ha Thach
a4fb8354e4
Merge pull request #2834 from hathach/add-tusb_int_handler-update-tinyusb_init
...
add new tusb_int_handler(rhport, in_isr) and update tusb_init(rhport, role)
2024-10-10 17:00:40 +07:00
