sabas1080
7bed7d70f0
add support SAML21
2021-06-15 00:01:28 -05:00
hathach
b36b211c26
clean up tusb_fifo.h include
2021-05-27 17:58:42 +07:00
hathach
13de8f5d98
minor clean up
2021-05-10 19:15:46 +07:00
hathach
b687a4fc20
Merge branch 'master' into edpt_ISO_xfer
2021-04-15 12:12:52 +07:00
Joey Castillo
7c8b4991f1
Add support for SAM L22 family
2021-04-09 17:33:14 -04:00
hathach
bebe2f0bbf
revert dcd_edpt_xfer_fifo() implementation for nuc505
2021-04-04 22:50:26 +07:00
hathach
586a46c7d3
revert dcd_edpt_xfer_fifo() implementation for samg
...
samg fifo is accessed byte by byte (although the register is 32 bit).
2021-04-04 21:33:19 +07:00
Reinhard Panhuber
a60bd0c8ac
Fix bug in writing to constant src/dst address.
...
Copying has to be conduct in full words (at least for STM32). Renamed
copy function to tu_fifo_write_n_const_addr_full_words()
2021-03-23 19:33:04 +01:00
Reinhard Panhuber
a1b07ae14c
Change copy modes for new read/write functions in tusb_fifo.c
2021-03-02 21:52:42 +01:00
Reinhard Panhuber
7b8a08d2e1
Rename dcd_edpt_iso_xfer() to dcd_edpt_xfer_fifo()
2021-03-02 20:00:39 +01:00
Reinhard Panhuber
d8481ac7e4
Fix wrong pointer call in dcd_samg.c
2021-02-17 22:52:59 +01:00
Reinhard Panhuber
893f997dcb
Change FIFO use indication to ff == NULL to avoid future errors.
...
This way people don't need to pay attention for the buffer pointer
2021-02-14 09:25:34 +01:00
Reinhard Panhuber
126e46e38a
Fix not increment xfer->buffer if xfer->buffer == NULL in dcd_samg.c
2021-02-13 17:37:13 +01:00
Reinhard Panhuber
7ab389db21
Implement dcd_edpt_iso_xfer() for dcd_samg.c. NOTE: ISO EP not supported
2021-02-13 16:36:32 +01:00
hathach
6e6e6265e4
use dcd_event_bus_reset() with speed to replace bus_signal
2021-01-08 22:34:36 +07:00
hathach
3e1d85eed2
comment clean up
2021-01-08 11:43:26 +07:00
hathach
cc5dfd03cd
update comment and correct the size to 8+2
2021-01-08 11:21:26 +07:00
hathach
60620dca42
walkround for samd21 setup_packet overflow
...
increase setup packet size from 8 to 12, since USB DMA controller is
suspected to overflow the buffer with 2 extra bytes
2021-01-08 01:21:03 +07:00
hathach
9d3a9cf546
add OPT_MCU_SAMD11
...
skip ci build for example that need more ROM/RAM could fit into SAMD11
2020-08-22 18:46:19 +07:00
hathach
acde49ccc9
enable pull-up in dcd_init() instead of usbd
2020-08-01 20:14:58 +07:00
hathach
0407cfe16c
fix samd21 race condition with setup packet
...
reproduced with Adafruit_TinyUSB_ArduinoCore port commit 11d669b4d2a40eb2fc5e51b2a9707a6de9d42363 and SAMD BSP 1.6.1
2020-07-23 01:39:15 +07:00
Jeff Epler
b2ef8cdd42
dcd_samd: Provide implementation for OPT_MCU_SAME5X
2020-06-25 18:51:04 -05:00
hathach
d4d6e06c1d
added OPT_MCU_SAME5X option
2020-06-24 00:53:17 +07:00
hathach
0e30afa691
abstract all UDP_CSR
2020-05-02 18:24:23 +07:00
hathach
3ad0cd041b
clean up
2020-05-02 16:29:22 +07:00
hathach
ac3c645dc1
fix EP0 data toggle issue
2020-05-02 16:09:28 +07:00
hathach
2a479175ae
remove toggle walkaround, fix control stall race condition
2020-05-02 14:51:21 +07:00
hathach
a74a823b0a
fix dcd samd race condition with setup packet
...
setup packet can complete together with previous status (in & out).
Always make sure to prepare valid buffer for holding setup packet when
queuing control status.
2020-04-30 00:29:47 +07:00
hathach
6f9c256ad0
complete remove dcd_set_config(), fix unit test
2020-04-17 13:52:34 +07:00
hathach
50be9d7c3a
mass rename tud/dcd_irq_handler to tud/dcd_init_handler
2020-04-17 12:27:53 +07:00
hathach
36d4efa077
samg implement dcd connect/disconnect
2020-04-16 22:59:19 +07:00
Ha Thach
04a06ec401
Merge branch 'master' into refactor-irqhandler
2020-04-11 15:49:34 +07:00
hathach
c1f3fbbc03
implement dcd connect/disconnect for samd and nrf
2020-04-09 11:47:02 +07:00
hathach
fb05451a26
mass rename dcd_isr() to dcd_irq_handler()
2020-04-06 17:24:22 +07:00
hathach
2d6d298302
move irqhandler to application
...
tud_isr() must be called by application to forward the irqhandle to the
stack
2020-04-06 14:11:45 +07:00
hathach
46f22860fb
correct waklaround with only status IN
...
correct usb descriptor msc dual example to work with samg
2020-02-07 22:13:38 +07:00
hathach
02b2c60231
samg55 work with cdc msc example
2020-02-07 17:39:20 +07:00
hathach
9ca6311ac4
implement walkaround for incorrect DATA Toggle for status control.
2020-02-07 16:46:18 +07:00
hathach
89f3ad59da
fix #247
2019-12-27 09:42:57 +07:00
hathach
0da45c2e78
clean up
2019-12-26 22:31:29 +07:00
hathach
b5684c5c10
merge dcd_samd51 & dcd_samd21 into dcd_samd
2019-12-26 21:46:59 +07:00
hathach
49b316143a
improve samd, fix missing setup packet occasionally
2019-12-26 17:11:24 +07:00
hathach
5690e7b304
fix samd51 setup packet handling
...
issue occur due to race condition
https://github.com/adafruit/Adafruit_TinyUSB_Arduino/issues/37
2019-12-25 23:47:47 +07:00
hathach
bbada1d3e6
adding lookup table for debugging
...
add msc scsi command list
2019-12-23 18:54:06 +07:00
hathach
421221baa5
making more progress, but failed with WRITE10
...
incorrect queue 448 bytes instead of 512
2019-12-21 23:51:57 +07:00
hathach
050fa2fd39
able to response to scsi inquiry, but failed to response to test unit ready
2019-12-21 19:33:41 +07:00
hathach
752aea7d72
enhance samg
2019-12-09 23:58:13 +07:00
hathach
fa96078882
clear data toggle in clear stall, also set config bit
2019-12-09 23:21:06 +07:00
hathach
75a2157715
fix samd using TUSB_REQ_SET_ADDRESS in dcd_edpt0_status_complete
2019-12-09 23:20:21 +07:00
hathach
0316e0ecd4
update descriptor, enhance ep in transfer
2019-12-09 22:48:35 +07:00