hathach
8f17945b67
move irq for stm32 synopsys
2020-04-08 16:37:09 +07:00
hathach
9014ca5528
move irq for stm32 fsdev
2020-04-08 16:26:14 +07:00
hathach
06377a341b
add tud_irq_handler() for all lpc ip3511 (13, 15, 11)
2020-04-06 18:00:37 +07:00
hathach
138965d1d1
add tud_irq_handler() to all NUC board
2020-04-06 17:43:56 +07:00
hathach
4179334aca
call tud_irq_handler() for all nrf5x board
2020-04-06 17:35:11 +07:00
hathach
fb05451a26
mass rename dcd_isr() to dcd_irq_handler()
2020-04-06 17:24:22 +07:00
hathach
2d6d298302
move irqhandler to application
...
tud_isr() must be called by application to forward the irqhandle to the
stack
2020-04-06 14:11:45 +07:00
Ha Thach
435485b524
Merge pull request #304 from pigrew/stm32_xfer_rewrite
...
STM32FSDEV: Rewrite transfer ISR
2020-03-25 10:19:07 +07:00
Ha Thach
95009a9e79
Merge pull request #194 from cr1901/msp430f5529
...
[WIP] MSP430 Support
2020-03-24 11:57:20 +07:00
William D. Jones
6b5157fd28
dcd_msp430x5xx: Add dummy dcd_edpt0_status_complete handler. Add
...
comment which describes why it might be needed.
2020-03-24 00:03:12 -04:00
Nathan Conrad
eaf767b0db
STM32FSDEV: Rewrite transfer ISR
2020-03-22 14:26:48 -04:00
hathach
4f871063fd
Merge branch 'master' into cr1901-msp430f5529
2020-03-22 17:19:57 +07:00
hathach
a93548cfe9
update comment per review
2020-03-17 23:39:53 +07:00
hathach
a39d170672
follow up to pr #301
...
rename OPT_MCU_NUC505_USB_DMA to simply USE_DMA
2020-03-17 10:40:45 +07:00
Peter Lawrence
df05440d92
NUC505 : added comment on DMA choice
2020-03-16 13:20:17 -05:00
Peter Lawrence
fb56c02a6f
NUC505 : fix operation with net_lwip_webserver
2020-03-15 17:44:09 -05:00
hathach
71fb3985ba
Merge branch 'nuc120' of https://github.com/majbthrd/tinyusb into majbthrd-nuc120
2020-03-10 11:53:11 +07:00
hathach
e0cdab5bf7
fix stm32 fsdev epdesc
2020-03-08 16:28:21 +07:00
hathach
c8247f0907
fix zlp for nrf52840
2020-03-08 14:20:28 +07:00
Ha Thach
5f5ee465a6
Merge pull request #291 from hathach/port-samg55
...
Port samg55
2020-03-07 16:38:59 +07:00
Peter Lawrence
7d8ecc63a6
add Nuvoton NUC505
2020-02-07 20:11:00 -06:00
hathach
46f22860fb
correct waklaround with only status IN
...
correct usb descriptor msc dual example to work with samg
2020-02-07 22:13:38 +07:00
hathach
02b2c60231
samg55 work with cdc msc example
2020-02-07 17:39:20 +07:00
hathach
087e3c7f56
Merge branch 'master' into port-samg55
2020-02-07 16:50:07 +07:00
hathach
9ca6311ac4
implement walkaround for incorrect DATA Toggle for status control.
2020-02-07 16:46:18 +07:00
Peter Lawrence
cd8eb2a06b
added support for Nuvoton NUC120
2020-01-25 13:10:32 -06:00
hathach
e2f60a5134
rt10xx: correct max endpoint count is 8
2020-01-17 17:09:23 +07:00
hathach
04d8671641
clean up, disable SOF for dcd trans since we don't use it for now
2020-01-17 12:59:00 +07:00
hathach
3208fe00b6
clean up
2020-01-17 12:06:59 +07:00
Ha Thach
1f95f439e1
Merge pull request #274 from tannewt/dcache
...
Clean and invalidate the DCache when we have one.
2020-01-17 09:47:38 +07:00
Scott Shawcroft
cd6454a330
Add if guards for dcache flushes.
2020-01-16 17:17:49 -08:00
Scott Shawcroft
ae68668df9
flush and invalidate the dcache
2020-01-15 21:59:15 -08:00
Ha Thach
12b191510a
Merge branch 'master' into nucbusreset
2020-01-16 11:22:33 +07:00
Ha Thach
537ceb0f65
Merge branch 'master' into line_endings
2020-01-16 10:55:14 +07:00
Peter Lawrence
2ed395bde3
nuc121: survive USB bus reset
2020-01-15 21:40:24 -06:00
Peter Lawrence
c04bc07c29
nuc121: enhanced driver and hopefully added readability
2020-01-15 20:09:50 -06:00
Nathan Conrad
25c1bea782
Normalize line endings
2020-01-15 14:47:43 -05:00
Peter Lawrence
7f2db321bf
nuc121: better fix for handling large OUT transfers
2020-01-15 10:23:23 -06:00
Peter Lawrence
f2a5335417
nuc121: fix handling of OUT transfers larger than max packet size
2020-01-14 22:07:38 -06:00
Sean Cross
a6b916ba85
Merge pull request #269 from antmicro/volatile_buffers_fix
...
dcd_eptri: Fix rx_buffer/tx_buffer volatile annotation
2020-01-15 07:02:11 +10:00
Mateusz Holenko
c1781e5e7c
dcd_eptri: Fix rx_buffer/tx_buffer volatile annotation
...
This makes `rx_buffer` and `tx_buffer` *pointers*
volatile in order to avoid caching them in a register.
The original notation meant "a pointer to a volatile value"
(equivalent of `volatile uint8_t *`). This resulted in
`while(rx_buffer[ep_num] != NULL) ;` loop to get stuck
forever, even though the IRQ handler set the `rx_buffer[ep_num] = NULL`.
2020-01-14 13:57:17 +01:00
Ha Thach
130250a2be
Merge branch 'master' into nuc121
2020-01-07 16:26:58 +07:00
Peter Lawrence
5c5f876461
dcd_nuc121: allow user ZLP transfers to get a callback
2020-01-04 13:36:26 -06:00
Peter Lawrence
f4371e79b1
add Nuvoton NUC121/NUC125/NUC126
2020-01-04 10:31:55 -06:00
hathach
89f3ad59da
fix #247
2019-12-27 09:42:57 +07:00
hathach
0da45c2e78
clean up
2019-12-26 22:31:29 +07:00
hathach
b5684c5c10
merge dcd_samd51 & dcd_samd21 into dcd_samd
2019-12-26 21:46:59 +07:00
hathach
49b316143a
improve samd, fix missing setup packet occasionally
2019-12-26 17:11:24 +07:00
hathach
5690e7b304
fix samd51 setup packet handling
...
issue occur due to race condition
https://github.com/adafruit/Adafruit_TinyUSB_Arduino/issues/37
2019-12-25 23:47:47 +07:00
hathach
bbada1d3e6
adding lookup table for debugging
...
add msc scsi command list
2019-12-23 18:54:06 +07:00
