3635 Commits

Author	SHA1	Message	Date
hathach	4537ba66e5	fixing build error with host stack	2018-12-05 20:26:55 +07:00
hathach	27793cbd3d	fix travis build	2018-12-05 17:43:09 +07:00
hathach	d887829b4c	change usbd_init() return to bool for simplicity	2018-12-05 17:30:04 +07:00
hathach	3dc0653d70	clean up	2018-12-05 17:09:30 +07:00
hathach	6f3898572d	add role to OSAL_QUEUE_DEF() to disable correct dcd/hcd isr	2018-12-05 17:01:19 +07:00
hathach	9f3e91a934	update nrf errata	2018-12-05 14:30:47 +07:00
hathach	a73017fdc2	hal clean up ... - replace tusb_hal_int_enable/disable to dcd_int_enable/disable, hcd_int_enable/disable - remove tusb_hal_init(), this will be part of dcd_init/hcd_init, anything beyond dcd/hcd should be inited by bsp	2018-12-05 13:20:25 +07:00
hathach	6048a3bff4	remove dcd_connect/disconnect since there is no usage now	2018-12-05 12:22:33 +07:00
hathach	c1336dff03	lpc move Chip_USB_Init() out of stack to bsp	2018-12-05 11:53:56 +07:00
hathach	9176b7b1da	renane file	2018-12-05 08:51:11 +07:00
hathach	dd9c7b4249	lpc40xx device work, moving Chip_USB_Init out of tinyusb	2018-12-05 08:47:23 +07:00
hathach	fe8346e642	move pinmux out of dcd into bsp	2018-12-04 18:38:01 +07:00
hathach	6c2404ca49	adding ea4088 quickstart, able to blink	2018-12-04 16:32:20 +07:00
hathach	261e0f9801	adding lpc40xx support	2018-12-04 16:06:50 +07:00
hathach	7120e12971	add mcb1800, blink led ok	2018-12-04 13:17:12 +07:00
hathach	bf5ac608ff	rename dcd 18 43	2018-12-04 12:47:58 +07:00
hathach	1d6bbd9990	clean up dcd 43	2018-12-03 23:18:51 +07:00
hathach	29f721ba2c	dcd lpc43 clean up	2018-12-03 23:06:28 +07:00
hathach	9fec39d893	use lpcopen for lpc43x, work well	2018-12-03 22:58:21 +07:00
hathach	bb7123eed1	use lpcopen for ea4357, blinky ok	2018-12-03 21:22:11 +07:00
hathach	7f55bbaf05	clean up	2018-12-03 18:32:06 +07:00
hathach	9e33f19378	clean up	2018-12-03 17:47:37 +07:00
hathach	63faea3929	migrate lpc17 to lpcopen, usb device work ok	2018-12-03 17:43:16 +07:00
hathach	66bd9f0a16	wrap up lpc11u port	2018-12-03 13:15:28 +07:00
hathach	f28a15a886	clean up dcd lpc11u	2018-12-03 12:31:03 +07:00
hathach	57f7c18d77	dcd lpc11u6x work with cdc + msc	2018-12-03 00:04:55 +07:00
hathach	5848dd2895	lpc11u use USBSRAM, able to response with 1st request	2018-12-02 02:13:48 +07:00
hathach	fb842bb804	lp11u able to receive setup packet	2018-12-01 22:21:54 +07:00
hathach	d246cc2e6c	lpc13xx build ok (not work) with lpcopen	2018-11-30 23:39:18 +07:00
hathach	804c60304e	adding ses lpc13xx	2018-11-30 13:25:58 +07:00
hathach	3c49bfb588	remove obsolete example	2018-11-30 13:05:20 +07:00
hathach	1f076bd945	rename cont	2018-11-30 12:59:23 +07:00
hathach	0ab62e6fa2	more rename	2018-11-30 12:57:44 +07:00
hathach	658c2ff570	rename	2018-11-30 12:56:09 +07:00
hathach	723e02780d	clean up	2018-11-30 12:51:54 +07:00
hathach	d96347a0f5	rename OPT_MCU_LPC13UXX to OPT_MCU_LPC13XX	2018-11-30 12:48:06 +07:00
hathach	522b0c11ef	move nvic prio in hal/dcd to bsp for portability	2018-11-29 22:59:00 +07:00
hathach	57b85262b2	added & tested lpc17xx freertos device example ... - add USB priority check for freeRTOS config	2018-11-29 21:41:09 +07:00
hathach	15e4b97e36	lpc17xx add dcd_edpt_stalled	2018-11-29 20:09:02 +07:00
hathach	a76c5bf154	dcd lpc17xx, route control endpoint to EP_FAST	2018-11-29 19:58:17 +07:00
hathach	ed65a43977	clean up	2018-11-29 13:09:58 +07:00
hathach	402a5fee90	dcd lpc17xx enable EpIntEn for non-control IN after DMA complete ... all transfer work well	2018-11-29 12:56:02 +07:00
hathach	c3140af274	correct TUD_OPT_HIGH_SPEED	2018-11-28 17:54:11 +07:00
hathach	772b2b692f	more dcd lpc17xx clean up	2018-11-28 17:31:15 +07:00
hathach	4a521d5085	clean up	2018-11-28 17:02:46 +07:00
hathach	04ad5da820	improve non-control xfer for lpc17xx	2018-11-28 16:53:36 +07:00
hathach	8b03b6d3b4	add Auto descriptor endpoint num config to support lpc17xx ... CFG_TUD_DESC_*_EPNUM	2018-11-28 16:10:31 +07:00
Scott Shawcroft	b4103eef06	needs to be filled out. blinks though	2018-11-27 18:11:03 -08:00
hathach	a3cc52829b	clean up	2018-11-27 23:55:10 +07:00
hathach	16b3f11d9f	clean up	2018-11-27 21:53:36 +07:00