hathach
a493fab753
separate fake ehci's run async & period list
...
refractor list_find_previous_item & list_remove_qhd to act on ehci_link_t* instead of ehci_qhd_t*
fully support 1ms, 2ms, 4ms, 8ms for period list (each list has a dummy queue head)
- change period list structure
limit the maximum polling interval to 256 ms
add max_loop static MAX number of iteration for list_find_previous_item
add test for close 256ms polling interrupt
2013-04-21 15:09:54 +07:00
hathach
11dff6f978
add Lib_OemBaseBoard to bsp/board but current exclude from all builds (added when needed later)
2013-04-09 02:30:33 +07:00
hathach
c036efff1d
adding code to allow configure MIC2555 to pull down D+/D- (still need bit bangding I2C on PB_0 PB_1)
...
add back port reset after get 8 bytes of device descriptor
2013-04-09 02:13:18 +07:00
hathach
94e25880dc
- add scu_pinmux(0x2, 5, MD_PLN | MD_EZI | MD_ZI, FUNC2); // USB1_VBUS monitor presence
...
- USB1 host run ok with NGX4330
2013-04-08 14:57:00 +07:00
hathach
95df92055c
fix board uart init with NGX4330 (use UART0)
...
add USB1_PWR_EN (GPIO5[6])
2013-04-08 02:36:43 +07:00
hathach
1776bb53f6
add hal init for USB1 and trying to get USB1 working
...
add hack delay 100 ms after a port reset (huge) for correct speed detection
2013-04-07 03:40:24 +07:00
hathach
e658e67ebe
fix the damn bug within 10 line of code in keyboard_app.c
2013-03-29 00:20:27 +07:00
hathach
56cd8be75e
change website from tinyusb.net to tinyusb.org
2013-03-25 11:46:30 +07:00
hathach
79e277d323
go through all the enumeration (up to get full configuration)
...
- fix init_qhd for address 0 (clear queue head --> ehci controller halted)
- fix bug in usbh_init missing address0 for semaphore create
TUSB_CFG_DEBUG == 3: --> ATTR_ALWAYS_INLINE is null --> allow gcc to export "normal inline" function
2013-03-13 00:02:45 +07:00
hathach
535f330026
update license year from 2012 to 2013
2013-01-27 13:50:40 +07:00
hathach
25f6cee73b
add DEVICE_ROM_DRIVER_ADDR macro in hal to point to rom driver add
...
add TUSB_ATTR_RAM_SECTION in tinyusb_config.h to abtract usb ram placement to application
remove power_api.h (mcu dependency)
2013-01-18 11:49:51 +07:00
hathach
c16632da0b
add UART support for ea4357 (tested)
2013-01-17 14:40:46 +07:00
hathach
480ddb4fec
start to add bsp and build configuration for embedded artist 4357
2013-01-17 11:03:43 +07:00
