hathach
a512a31c9d
Merge branch 'master' into add-stm-hs
2020-07-01 17:58:02 +07:00
Ha Thach
530b0099a5
Merge pull request #439 from UweBonnes/add-stm-hs
...
Add stm hs
2020-07-01 13:09:07 +07:00
hathach
463e978134
added DA14695 DK USB bsp
2020-07-01 12:47:14 +07:00
hathach
2f946e765d
rename file
2020-07-01 12:42:12 +07:00
hathach
0477446224
more clean up
2020-06-30 16:31:59 +07:00
hathach
f3a88477dc
revert rhport config in nxp mcus
2020-06-30 16:18:43 +07:00
Uwe Bonnes
30a18e2605
stm32f723disco: USB HS enumerates.
2020-06-30 11:07:53 +02:00
Uwe Bonnes
f6660c39a1
Add Stm32F7xxdisco board support files
...
Status with examples/device/cdc_msc:
- make BOARD=stm32f723disco => OK
- make BOARD=stm32f723disco PORT=1 => No Reaction
- make BOARD=stm32f746disco => OK
- make BOARD=stm32f746disco PORT=1 => Hangs during enumeration
- make BOARD=stm32f769disco => Hangs during enumeration
2020-06-30 11:02:38 +02:00
Uwe Bonnes
4b7f848e1f
stm32h743nucleo: Enable Log via STLINK-VCP.
2020-06-30 11:01:44 +02:00
hathach
ab75998316
Merge branch 'master' into add-stm-hs
2020-06-30 01:55:57 +07:00
Ha Thach
05996aee64
Merge pull request #427 from kasjer/kasjer/add-da1469x-support
...
Support for DA1469x MCU from Dialog Semiconductor
2020-06-30 01:20:56 +07:00
Ha Thach
2b9466dbc0
Merge pull request #445 from hathach/add-kaluga-bsp
...
added esp32s2 kaluga bsp
2020-06-29 19:16:09 +07:00
hathach
2dff40236c
add kaluga files
2020-06-29 18:40:23 +07:00
hathach
50b569ad1b
added esp32s2 kaluga bsp
2020-06-29 16:52:08 +07:00
Jerzy Kasenberg
8e143fc962
Add board support for Dialog DA1469x-dk-pro
...
This adds source files that allow to run TinyUSB stack on DA1469x-dk-pro board.
Source files .c .S and .ld are taken from Apache Mynewt repository.
Those files were stripped to allow starting board without Mynewt os.
2020-06-29 11:02:32 +02:00
Czeslaw Makarski
7c94176b4b
Update NRFX to v2.2.0
2020-06-24 15:07:28 +02:00
hathach
667eaa6dd6
fix stm32h743 priority with freeRTOS
2020-06-16 00:03:52 +07:00
hathach
0bfa839ac0
clean up, update other example config
2020-06-15 23:06:17 +07:00
hathach
a347de6e50
revert CFG_TUSB_RHPORT0_MODE to previous way
2020-06-14 18:28:45 +07:00
Jerzy Kasenberg
56f3898ced
Add Dialog DA1469x register definition file
...
Register definition file along with some MCU headers was taken
from Dialog SDK for DA1469x MCUs.
Those files are needed for USB port.
2020-06-09 12:55:28 +02:00
hathach
e92118635c
adding speed detect on bus reset
2020-06-01 13:40:18 +07:00
hathach
5ffba8536d
able to detect as hs
2020-05-31 19:41:22 +07:00
hathach
e0490ae786
fix idf usb pin init changes
2020-05-29 13:06:33 +07:00
hathach
227bffe04b
adding h743 uart, but not enabled yet since it conflict with OTG_FS2
2020-05-27 01:14:52 +07:00
hathach
0482f0d686
update h743eval with rhport=1 highspeed
2020-05-26 22:15:00 +07:00
hathach
fad088719e
merge CFG_TUSB_RHPORT1_MODE into CFG_TUSB_RHPORT0_MODE
...
each port is 1 byte for easy maintenance
2020-05-26 15:21:23 +07:00
hathach
62a746bdc7
wip
2020-05-26 12:18:36 +07:00
hathach
ba9c774a2a
board test work fine
2020-05-23 13:29:30 +07:00
hathach
550746097b
fix cast-align warning for nuc505
2020-05-18 13:03:41 +07:00
hathach
1a8ce043ed
enable -Wcast-align
...
suppress vendor sdk driver at board.mk
2020-05-17 14:24:15 +07:00
Mark Olsson
3c43009278
Add support for stm32f746nucleo board
2020-05-15 10:23:01 +02:00
Jerzy Kasenberg
615369a6eb
stm32l476disco: Fix system clock setup
...
Code suggested that PLL with MSI is used resulting in 80MHz clock.
When in fact PLL was not configured and system clock was left at MSI 48MHz.
This happens because PLL configuration requires that SysTick interrupt
has interrupt priority level configured correctly.
As it seems ST code intentionally setups variable uwTickPrio to invalid
value and later when it is not setup by user code configuration
of oscillator will fail before PLL is configured.
This simple changes systick priority to some valid value that
allows clock to use PLL.
2020-05-06 15:13:55 +02:00
Jerzy Kasenberg
d9e534f6f2
stm32l476disco: fix uninitialized filed usage
...
Field PLLState was not initialized in RCC_OscInitStruct.PLL in
function SystemClock_Config().
Value is used in HAL_RCC_OscConfig() regardless of oscillator.
In lucky case value would be 0 RCC_PLL_NONE and nothing would
happen.
If value was incorrect following line would end up in assert:
assert_param(IS_RCC_PLL(RCC_OscInitStruct->PLL.PLLState));
If value was valid but no RCC_PLL_NONE pll could be configured
with some other random values.
Setting PLLState to RCC_PLL_NONE eliminates potential problem.
2020-05-06 14:25:46 +02:00
hathach
94fed7db0e
fix esp32 ci adding FREERTOS STATIC to sdkconfig default
2020-04-29 11:31:04 +07:00
hathach
7acdcc2ebc
Merge branch 'master' into add-more-example
2020-04-22 19:50:23 +07:00
hathach
1fc7f54a8a
added swo as logger
...
tested with feather nrf52840 + jlink
2020-04-22 19:18:03 +07:00
hathach
afc4042375
add LOGGER option to use rtt
...
update example readme for debug log. Update bug template to ask for LOG
as well.
2020-04-22 17:08:41 +07:00
hathach
e4570c35f7
add uart for ea4357
2020-04-20 00:27:35 +07:00
Ha Thach
1f69807621
Merge pull request #354 from hathach/cxd56-disconnect-connect
...
Cxd56 disconnect connect
2020-04-17 13:12:47 +07:00
hathach
50be9d7c3a
mass rename tud/dcd_irq_handler to tud/dcd_init_handler
2020-04-17 12:27:53 +07:00
hathach
89f99426fc
add code for disconnect/connect (not tested)
2020-04-17 11:48:49 +07:00
hathach
989cca5b1a
update per review
2020-04-17 09:29:02 +07:00
hathach
bb2669fbc0
add dfu generate target for fomu
2020-04-16 22:24:48 +07:00
hathach
a009775745
dcd disconnect/connect for transdimension ip
2020-04-16 16:56:16 +07:00
Ha Thach
04a06ec401
Merge branch 'master' into refactor-irqhandler
2020-04-11 15:49:34 +07:00
hathach
d8d5902ccb
change saola-1 led to pin 18 by default
2020-04-10 15:44:50 +07:00
hathach
cefbd9579c
add neopixel led strip driver for saola, make saola as an component
2020-04-09 11:02:16 +07:00
hathach
40e23672ff
rename hal_dcd_isr to dcd_irq_handler for fomu
2020-04-08 16:47:20 +07:00
hathach
e879ad1e6f
move irq from msp430
2020-04-08 16:42:36 +07:00
hathach
8f17945b67
move irq for stm32 synopsys
2020-04-08 16:37:09 +07:00
