1452 Commits

Author	SHA1	Message	Date
hathach	658c2ff570	rename	2018-11-30 12:56:09 +07:00
hathach	723e02780d	clean up	2018-11-30 12:51:54 +07:00
hathach	d96347a0f5	rename OPT_MCU_LPC13UXX to OPT_MCU_LPC13XX	2018-11-30 12:48:06 +07:00
hathach	522b0c11ef	move nvic prio in hal/dcd to bsp for portability	2018-11-29 22:59:00 +07:00
hathach	57b85262b2	added & tested lpc17xx freertos device example ... - add USB priority check for freeRTOS config	2018-11-29 21:41:09 +07:00
hathach	15e4b97e36	lpc17xx add dcd_edpt_stalled	2018-11-29 20:09:02 +07:00
hathach	a76c5bf154	dcd lpc17xx, route control endpoint to EP_FAST	2018-11-29 19:58:17 +07:00
hathach	ed65a43977	clean up	2018-11-29 13:09:58 +07:00
hathach	402a5fee90	dcd lpc17xx enable EpIntEn for non-control IN after DMA complete ... all transfer work well	2018-11-29 12:56:02 +07:00
hathach	c3140af274	correct TUD_OPT_HIGH_SPEED	2018-11-28 17:54:11 +07:00
hathach	772b2b692f	more dcd lpc17xx clean up	2018-11-28 17:31:15 +07:00
hathach	4a521d5085	clean up	2018-11-28 17:02:46 +07:00
hathach	04ad5da820	improve non-control xfer for lpc17xx	2018-11-28 16:53:36 +07:00
hathach	8b03b6d3b4	add Auto descriptor endpoint num config to support lpc17xx ... CFG_TUD_DESC_*_EPNUM	2018-11-28 16:10:31 +07:00
Scott Shawcroft	b4103eef06	needs to be filled out. blinks though	2018-11-27 18:11:03 -08:00
hathach	a3cc52829b	clean up	2018-11-27 23:55:10 +07:00
hathach	16b3f11d9f	clean up	2018-11-27 21:53:36 +07:00
hathach	15f704b623	improve dcd control lpc17xx	2018-11-27 21:51:02 +07:00
hathach	038851c362	enhance dcd lpc17xx. Able to pass enumeration	2018-11-27 20:48:46 +07:00
hathach	80ecf1fd54	add OPT_MODE_HIGH_SPEED	2018-11-26 14:56:07 +07:00
hathach	064eec5dd8	clean up warnings	2018-11-26 12:29:55 +07:00
Scott Shawcroft	bf70f89240	Introduce a Makefile for the OS_NONE device example ... It currently supports the SAMD21 and SAMD51 only. More will be added later.	2018-11-25 11:46:06 -08:00
Scott Shawcroft	47fabe42ed	One tweak to make -Wdiscarded-qualifiers happy.	2018-11-23 12:48:55 -08:00
Scott Shawcroft	bf8c4612dc	Make sure OUT endpoint 0 on the SAMDs always has a valid buffer to store ... a SETUP token into.	2018-11-23 11:20:23 -08:00
Scott Shawcroft	246c28db1a	Turn off interrupts when working with the event queue.	2018-11-23 11:18:53 -08:00
Scott Shawcroft	6aa0146c72	Reset USB peripheral and wait for startup	2018-11-23 11:15:39 -08:00
hathach	394a22ecf7	remove pragma GCC diagnostic	2018-11-23 15:25:25 +07:00
hathach	f196b24dce	rename DCD_XFER_SUCCESS to XFER_RESULT_SUCCESS	2018-11-23 15:22:46 +07:00
hathach	a619ff88a3	rename xfer complete enum	2018-11-23 15:17:43 +07:00
hathach	cb8782e5f2	rename tusb_event_t to xfer_result_t	2018-11-23 15:14:47 +07:00
hathach	e61e9d8b1b	nrf5x add DCD_EVENT_UNPLUGGED event	2018-11-23 15:05:40 +07:00
hathach	4e8400e6fb	more clean up	2018-11-22 21:58:06 +07:00
hathach	a1faf5c9cb	clean up dcd lpc43xx	2018-11-22 21:37:23 +07:00
hathach	569e85a0c0	cdc work ok with lpc43xx	2018-11-22 17:40:20 +07:00
hathach	60d8cde695	rename CFG_TUSB_MEM_SECTION to CFG_TUSB_MEM_SECTION	2018-11-22 17:21:07 +07:00
hathach	4314be9aeb	msc device block count and block num ... - replace CFG_TUD_MSC_BLOCK_NUM & CFG_TUD_MSC_BLOCK_SZ by tud_msc_capacity_cb() (mandatory callback)	2018-11-22 12:11:06 +07:00
hathach	1d6fc49fa9	clean up	2018-11-21 17:03:39 +07:00
hathach	3cad1d1134	samd21 work well with cdc	2018-11-21 15:00:36 +07:00
hathach	a30dfa3324	clean up	2018-11-21 13:11:19 +07:00
hathach	a0ce92bcfd	update dcd samd21	2018-11-21 13:01:39 +07:00
hathach	155edc7b00	fix ses irq vector	2018-11-21 12:36:28 +07:00
hathach	d036f62b0e	samd51 fix stable issue with dcd	2018-11-20 17:25:41 +07:00
hathach	c503d48ec4	clean up	2018-11-20 01:20:39 +07:00
hathach	cb37b819d9	rename control_state	2018-11-16 22:20:13 +07:00
hathach	00694b56c5	nrf5x: clean up dcd, add comment	2018-11-16 22:17:11 +07:00
hathach	7219ef8ed6	rename control.c to usbd_control	2018-11-16 22:00:16 +07:00
hathach	1640e7590e	remove control.h (move prototype to usbd_pvt.h)	2018-11-16 21:58:35 +07:00
hathach	215f8603b1	nrf5x: refactor device control transfer. ... - make control transfer as part of usbd. Class driver must use usbd_control_ API() instead of dcd_ api. - change the signature of class driver's control_request - allow control request complete to stall in staus stage - move control request parser & handling to usbd.	2018-11-16 21:56:39 +07:00
hathach	b62ca2e5cd	nrf5x: correct control transfer direction ... added dcd description.	2018-11-16 21:52:23 +07:00
hathach	95cd6c3a2f	remove control from class driver array	2018-11-14 23:39:58 +07:00