Jerzy Kasenberg
6d8677a78a
dcd_da146xx: Add VBUS handling
...
DA146xx are Bluetooth devices that may be battery
powered and when not connected to USB host there
is no need for USB peripheral to be running.
This change allows to enable USB peripheral when
VBUS is present otherwise USB is down reducing
power consumption.
tud_vsub_changed() function must be called
whenever VBUS change was detected.
For bus-powered devices this function should be called
at startup since VBUS must be present while device
is working.
2021-09-17 12:10:17 +02:00
hathach
b363afc091
minor clean up
2021-09-17 00:46:29 +07:00
hathach
c65cc75c6b
use correct resume detection for kl25z
2021-09-17 00:44:39 +07:00
hathach
8dfe0898e7
minor update to dcd khci
2021-09-17 00:43:10 +07:00
kkitayam
fbe1bf375c
Fix stall interrupt handling
2021-09-15 21:39:02 +09:00
hathach
93ed3034c0
merge master and minor clean up
2021-09-15 18:35:52 +07:00
hathach
f39656b6d7
Merge branch 'master' of github.com:hathach/tinyusb into kkitayam-impl_close_all_for_khci
2021-09-15 18:29:28 +07:00
Ha Thach
03866ddf9b
Merge pull request #1062 from HiFiPhile/fifo_dcd_transdimension
...
Improvements for dcd_transdimension
2021-09-15 16:07:06 +07:00
Ha Thach
6d3fb7eb98
Merge pull request #1087 from HiFiPhile/nuc_wkp
...
NUC126: fix remote_wakeup
2021-09-14 11:40:55 +07:00
hathach
cdc63459eb
esp32sx implement dcd_remote_wakeup(), fully compliance to chapter9 test suite
2021-09-13 16:49:38 +07:00
hathach
e64bfb9ff5
implement dcd_edpt_close_all(), pass chapter9 test suite (without remote wakeup)
2021-09-13 16:16:37 +07:00
hathach
43e6555fd0
clean up
2021-09-13 13:09:38 +07:00
hathach
ce5db06ba0
clear PID along with clear stall
2021-09-13 12:05:49 +07:00
hathach
6feda5ae8f
Merge branch 'nuc_wkp' of https://github.com/HiFiPhile/tinyusb into HiFiPhile-nuc_wkp
2021-09-13 11:52:16 +07:00
hathach
9bed4e2e21
refactor nxp TDI dcd_edpt_xfer_fifo
2021-09-13 00:45:15 +07:00
hathach
038ec341f8
Merge branch 'fifo_dcd_transdimension' of https://github.com/HiFiPhile/tinyusb
2021-09-12 17:39:32 +07:00
hathach
dd60ce784c
nxp tdi: implement dcd edpt close all
2021-09-11 21:29:04 +07:00
hathach
1f7ade2b75
nxp tdi: fix error td prevent further transfer
2021-09-11 19:27:37 +07:00
MasterPhi
22571ec98e
reset PID to DATA0 on clear_stall.
2021-09-10 16:04:47 +02:00
MasterPhi
8886de0d8a
Fix remote_wakeup
2021-09-10 13:05:15 +02:00
MasterPhi
580893b3fe
Shorter expr.
2021-09-10 11:17:33 +02:00
kkitayam
2998f67eac
Fix dcd_edpt_clear_stall to reset data toggle
2021-09-10 00:18:43 +09:00
Mengsk
283783c082
dcd_edpt_xfer_fifo: use qtd_init if restriction not met.
2021-09-09 16:45:18 +02:00
hathach
ad8c0ee818
nxp tdi: enhance qhd using DCD_ATTR_ENDPOINT_MAX
2021-09-09 20:26:03 +07:00
hathach
f948cbe471
nxp tdi implement remote wakeup
...
enhance bus reset, unplugged, suspend, resume detection
2021-09-09 17:04:04 +07:00
hathach
27800f7e4f
remove connected check for DCD_EVENT_UNPLUGGED since previous bus reset can clear this
...
implement unplugged detection for trans dimension dcd
2021-09-09 16:01:05 +07:00
kkitayam
780852efb3
Fix stall handling
2021-09-09 00:55:02 +09:00
kkitayam
22b5b47045
Implement dcd_edpt_close_all for NXP khci
2021-09-08 21:52:27 +09:00
Ha Thach
d66d817c38
Merge pull request #1080 from hathach/rx-msc-compliance
...
Renesas RX reset PID to DATA0 when open endpoint
2021-09-08 18:31:42 +07:00
Ha Thach
5f141a4c13
Merge pull request #1077 from hathach/st-synopsy-compliance
...
St synopsy compliance
2021-09-08 18:00:44 +07:00
hathach
d077574097
reset PID to DATA0 when open endpoint
2021-09-08 17:56:22 +07:00
hathach
67e80f60e3
fix build with gd32vf103
2021-09-08 13:35:11 +07:00
hathach
4ac136d81d
implement remote wakeup for stm synopsys
2021-09-08 00:57:07 +07:00
hathach
a54a974fa5
make synopsys usbcv compliance
...
- implement dcd_edpt_close_all()
- reset dtoggle when open endpoint
- correct dev interrupt mask on bus reset
2021-09-07 23:02:57 +07:00
kkitayam
f3da48d46a
Implement dcd_edpt_close_all() for Renesas RX family
2021-09-07 23:28:54 +09:00
hathach
d6e9fe38be
rp2040 implement dcd_edpt_close_all()
...
aslo rename reset_ep0_pid() and clean up. We only need to reset pid when
setup packet received
2021-09-01 19:44:12 +07:00
hathach
fc889ece74
rp2040 correct ep set/clear stall
...
- stall will remove pending (not complete) transfer. Correct reset data
toggle when clear stall.
- remove buf ctrl debug code
2021-09-01 16:52:27 +07:00
hathach
ab0c3e8dd0
fix rp2040 chapter 9 TD 9.6 test
2021-08-31 17:41:08 +07:00
MasterPhi
16b802d50c
add dcd_edpt_close and iso xfer.
2021-08-31 12:02:19 +02:00
MasterPhi
864d8381a7
dcd_transmission xfer_fifo support.
2021-08-31 11:59:51 +02:00
hathach
76345ea3a1
clear stall and reset data toggle when open edpt
...
required to pass one of msc test.
2021-08-31 16:41:45 +07:00
hathach
ad21b69277
fix nrf clear data toggle sequence when clearing stall
2021-08-29 12:05:34 +07:00
hathach
66c292e2ec
fix a couple of nrf dcd issue
...
- limit out xact dma to prevent usbd overflow in certain situation after
stalled
- drained already acked data when stalling an OUT endpoint
2021-08-29 00:34:21 +07:00
hathach
8bad0af849
explicitly clear stall and data toggle for edpoint upon open()
2021-08-27 22:31:08 +07:00
hathach
81c73c235f
implement dcd_edpt_close_all() for nrf52840
2021-08-27 22:30:30 +07:00
hathach
71e77e47fa
add dcd_edpt_close_all() for clear existing configured state
...
correctly responded to TD 9.13 Set Configuration Test
2021-08-26 17:07:03 +07:00
hathach
88bb8fac3d
rename host API to be consistent with naming on device stack
...
- tuh_device_get_speed() to tuh_speed_get()
- tuh_device_configured() to tuh_mounted()
- tuh_device_ready() to tuh_ready()
2021-08-24 12:37:04 +07:00
Ha Thach
9c3fdb8135
Merge pull request #1043 from hathach/more-host-improvement
...
More host improvement
2021-08-24 12:28:41 +07:00
Greg Steiert
86201f77be
initial commit of support for K32L2B
2021-08-23 16:17:57 -07:00
hathach
8dc16dd3a7
fix rp2040 build
2021-08-24 01:19:06 +07:00
