Reinhard Panhuber
e681678402
Implement dcd_edpt_iso_xfer() for dcd_nuc120.c
2021-02-13 17:06:27 +01:00
Reinhard Panhuber
7ab389db21
Implement dcd_edpt_iso_xfer() for dcd_samg.c. NOTE: ISO EP not supported
2021-02-13 16:36:32 +01:00
Reinhard Panhuber
59d6ed9ea4
Implement dcd_edpt_iso_xfer() for dcd_esp32s2.c
2021-02-13 12:13:10 +01:00
Reinhard Panhuber
cdf600048f
Merge remote-tracking branch 'upstream/master' into edpt_ISO_xfer
2021-02-12 18:05:20 +01:00
Reinhard Panhuber
a9fd0a454a
Complete redesign of audio driver.
2021-02-12 16:28:41 +01:00
ndinsmore
09868434cd
Fixes RP2040 buffer reallocation overrun problem ( #642 )
...
Fix running out of memory on a device that repeatedly closes and opens an endpoint. This is a workaround at the moment. A better solution would be to implement reclaiming usb buffer memory when closing an endpoint (i.e. implement dcd_edpt_close).
2021-02-12 08:16:46 +00:00
Ha Thach
78f50518a4
Merge pull request #610 from hathach/rp2040-followup2
...
Rp2040 followup2
2021-02-01 12:44:53 +07:00
Ha Thach
a044578a33
Merge pull request #601 from majbthrd/start_pi2tu
...
start the assimilation of Pi Pico into TU
2021-02-01 12:43:59 +07:00
Reinhard Panhuber
84406f1654
Rework audio driver
2021-01-31 19:08:23 +01:00
hathach
1abf9eeb80
clean up rp2040 assigned_address, remove panic from remote_wakeup
2021-01-27 13:18:03 +07:00
hathach
c3c4f65fea
wrap rp2040_usb around opt mcu
2021-01-27 13:04:38 +07:00
Kamil Tomaszewski
5f999fa6a0
Fix dcd issues on cxd56
...
Pass the next setup package when USB stack is ready to receive it.
When the transfer is 0 on EP0 send complete to the USB stack
Pass the data received after the setup package to the USB stack.
2021-01-25 11:13:56 +01:00
Peter Lawrence
edc2224118
rp2040: start to adopt TU coding conventions
2021-01-23 20:21:58 -06:00
Peter Lawrence
587d1b334b
rp2040_hcd: check pointer before using
2021-01-23 20:19:10 -06:00
Ha Thach
1e134cbb31
Merge branch 'master' into pico
2021-01-21 16:35:13 +07:00
graham sanderson
e0aa405d19
RP2040 support
2021-01-19 19:52:07 -06:00
Reinhard Panhuber
56edc2b261
Change names from edpt_ISO_xfer to edpt_iso_xfer
2021-01-19 10:50:19 +01:00
Reinhard Panhuber
595a88b34c
Correct include path to #include "common/tusb_fifo.h"
2021-01-18 17:38:32 +01:00
Reinhard Panhuber
dff588d772
Implement dcd_edpt_ISO_xfer() and adapt transmission scheme
2021-01-18 17:15:23 +01:00
Reinhard Panhuber
485d8fa77e
Merge remote-tracking branch 'upstream/master' into edpt_ISO_xfer
2021-01-09 12:10:08 +01:00
hathach
d33b22d127
fix ci
2021-01-08 22:48:52 +07:00
hathach
6e6e6265e4
use dcd_event_bus_reset() with speed to replace bus_signal
2021-01-08 22:34:36 +07:00
hathach
cca27fc383
another rename
2021-01-08 16:54:50 +07:00
hathach
201ea7ca6d
remove inline for update_grxfsiz
2021-01-08 16:38:41 +07:00
hathach
9998e8a665
more minor work
2021-01-08 16:34:36 +07:00
hathach
86c34a9a33
minor clean up following pr581
2021-01-08 16:25:30 +07:00
Ha Thach
1f00a182c4
Merge pull request #581 from hathach/dcd_synopsis_mem_allocation
...
Dcd synopsis mem allocation
2021-01-08 12:45:46 +07:00
hathach
3e1d85eed2
comment clean up
2021-01-08 11:43:26 +07:00
hathach
cc5dfd03cd
update comment and correct the size to 8+2
2021-01-08 11:21:26 +07:00
hathach
60620dca42
walkround for samd21 setup_packet overflow
...
increase setup packet size from 8 to 12, since USB DMA controller is
suspected to overflow the buffer with 2 extra bytes
2021-01-08 01:21:03 +07:00
Reinhard Panhuber
f2b4567a2b
Correct function declaration
2021-01-04 17:15:42 +01:00
Reinhard Panhuber
2fa500af18
Minor corrections for PR
...
- externerlize code into functions
- correct comments
2021-01-04 17:00:23 +01:00
Reinhard Panhuber
37bb14678a
Remove too verbose comment
2021-01-04 12:06:16 +01:00
Reinhard Panhuber
09d8ead4b8
Start changes - not yet finished
2021-01-04 12:02:08 +01:00
Reinhard Panhuber
13b499f910
Clean up
2021-01-03 17:59:50 +01:00
Reinhard Panhuber
56c47188d8
Rework USB FIFO allocation scheme and allow RX FIFO size reduction
2021-01-03 16:11:56 +01:00
kkitayam
2737166d2b
fixed wrong direction to enable EP in dcd_edpt_open.
...
fixed incorrect handling of STALL other than EP0
convert tabs to spaces
removed unused symbols
2020-12-23 20:32:29 +09:00
kkitayam
2bbfc56bd8
added support for frdm_kl25z
2020-12-18 00:07:50 +09:00
hathach
8b34f2fca8
fix ci
2020-11-27 16:07:13 +07:00
hathach
94527951a0
add bus suspend & resume support for esp32s2
2020-11-27 15:54:55 +07:00
hathach
496c7c701a
fix ci
2020-11-09 01:23:19 +07:00
Jacob Potter
229be75a98
Move into if statement
2020-10-24 17:16:05 -06:00
Jacob Potter
01996457c8
CR feedback: compare CFG_TUSB_RHPORT1_MODE instead of using new macro
2020-10-24 17:11:32 -06:00
Jacob Potter
c87ed8eff1
Allow use of internal FS PHY on OTG_HS interface
...
Some ST parts (like STM32F74xxx / STM32F75xxx) allow the USB_OTG_HS core to be used with
either an external high-speed ULPI PHY or an internal full-speed-only (12mbps) PHY. Currently
the code assumes than an ULPI PHY is used unless the chip has an internal high-speed PHY
(`#if defined(USB_HS_PHYC)`), with no provision to use the internal FS PHY.
2020-10-18 17:01:17 -06:00
Ha Thach
6ce5395947
Merge pull request #525 from kasjer/kasjer/da1469x-iso
...
da1469x iso support
2020-10-11 16:12:20 +07:00
Ha Thach
80c509a0f3
Merge pull request #520 from salkinium/feature/misc_enhancements
...
STM32F3 IRQ remap option and some minor improvements
2020-10-11 14:55:06 +07:00
Ha Thach
762b390433
Merge pull request #521 from PanRe/uac2
...
Uac2
2020-10-10 14:33:42 +07:00
Niklas Hauser
f914e48d25
Dynamically check STM32F3 IRQ remap option
2020-10-10 05:02:37 +02:00
Reinhard Panhuber
032e84c9be
Revert dcd_alloc_mem_for_conf() but keep changes from @kasjer for ISO EP
...
Add tud_audio_set_itf_close_EP_cb()
2020-10-09 19:50:05 +02:00
Jerzy Kasenberg
d36bfddc30
DA146xx: Allow transmitting of packets larger then 64 bytes
...
FIFO is limited to 64 bytes yet MCU is capable of transmitting
larger packets provided that FIFO will be filled on the fly
and USB_USB_TXCx_REG_USB_LAST_Msk bit is set after FIFO is
filled with all the data that should be transmitted.
This change allows to use FIFO level warning interrupt to fill
FIFO. When DMA is available it will be used instead of interrupts.
Some function names were changed to better reflect what each function
does.
2020-10-08 13:20:58 +02:00
