For self powered device if device started without VBUS present
it would not be correctly attached to USB bus even if tusb_vbus_changed()
was later called.
This modifies dcd_init() so it starts USB state machine without checking
if VBUS is present or not, like all others drivers do.
tusb_vbus_changed() function is also removed its content was moved to dcd_init.
dcd_da1469x can work with broader range of MCUs that
share same USB core.
Specific header file that was used DA1469xAB.h now it is changed
to mcu/mcu.h which includes actual MCU specific register file.
FIFO is limited to 64 bytes yet MCU is capable of transmitting
larger packets provided that FIFO will be filled on the fly
and USB_USB_TXCx_REG_USB_LAST_Msk bit is set after FIFO is
filled with all the data that should be transmitted.
This change allows to use FIFO level warning interrupt to fill
FIFO. When DMA is available it will be used instead of interrupts.
Some function names were changed to better reflect what each function
does.
Closing endpoints can be important when there are alternate
instances. This adds functionality of closing endpoints
similar to what exists in other drivers.
Internal FIFO for each endpoint is limited to 64 bytes.
It is possible to have longer packets if respective FIFO
is read during actual packet transmission.
This change updates receive data path to allow packets (and
endpoint size) larger then 64 bytes.
If DMA is not used yet DMA is setup for reception of big packets.
If DMA is already assigned to some transfer, code enables FIFO level
warning interrupts and tries to read data before FIFO is filled up.
Dialog Semiconductor's BLE MCU DA1469x comes with full speed USB.
It's base on National Semiconductor discrete USB controller USBN9603/4.
This adds support for:
- control/interrupt/bulk endpoints (up to 64 bytes)
- ISO endpoint were not tested and may not work correctly
- reset/sleep/wakeup are handled
- code for VBUS changes is provided
