33 Commits

Author	SHA1	Message	Date
hathach	253430a765	add example specific DEPS_SUBMODULES	2021-03-18 16:28:44 +07:00
hathach	ed8f117dd1	explicitly add dcd source file without vendor/family	2021-03-17 16:52:07 +07:00
hathach	7d877e286a	update DEPS_SUBMODULES to optimize ci	2021-03-05 22:24:03 +07:00
hathach	590d8d4d5c	rename FAMILY_SUBMODULES to DEPS_SUBMODULES	2021-03-04 22:53:02 +07:00
hathach	b846ded487	merge no-family example build ... specify FAMILY_SUBMODULES for all boards	2021-03-04 22:50:45 +07:00
hathach	a6efe475e7	use cmsis 5 for all stm32	2020-10-30 14:14:28 +07:00
hathach	1e02f6e066	f3 use offical st driver repo	2020-10-30 13:11:23 +07:00
Ha Thach	80c509a0f3	Merge pull request #520 from salkinium/feature/misc_enhancements ... STM32F3 IRQ remap option and some minor improvements	2020-10-11 14:55:06 +07:00
Niklas Hauser	7fda95f508	Remap USB IRQs on STM32F303 BSP	2020-10-11 09:27:43 +02:00
hathach	ec018fbf4e	clean up jlink default interface	2020-10-08 17:17:37 +07:00
hathach	50be9d7c3a	mass rename tud/dcd_irq_handler to tud/dcd_init_handler	2020-04-17 12:27:53 +07:00
hathach	9014ca5528	move irq for stm32 fsdev	2020-04-08 16:26:14 +07:00
Nathan Conrad	07c1ce76b8	Update F3 BSP for new HAL	2020-03-28 10:58:36 -04:00
Nathan Conrad	705d43cda7	Modify include of HAL, and remove CMSIS clock configuration code, and implement UART for STM32F407Disco	2020-03-26 10:10:06 -04:00
hathach	04cf337b79	clean up flash-stlink	2020-01-10 15:09:59 +07:00
hathach	88bdb12ee5	close #204 define HSE_VALUE in _hal_conf instead of board.mk	2019-12-11 15:19:51 +07:00
hathach	f638594536	move -flto to board.mk ... current board that doesn work with flto is spresense and mimxrt10xx (due to xip image_vector_table is optimized out).	2019-11-20 16:06:40 +07:00
hathach	6f952a8e84	fix missing board uart read/write()	2019-10-24 12:20:06 +07:00
hathach	6183dbd0ce	add -Wextra for more warnings to example ... non-stack warning (probably mcu driver) should be suppressed in the board.mk	2019-09-27 00:15:43 +07:00
hathach	ff7261600c	ported stm32f2, added board stm32f207zg nucleo ... close #127	2019-09-12 10:41:03 +07:00
hathach	de659be83e	tested all the stm32f4 board, work great	2019-09-11 17:37:23 +07:00
hathach	8a2b228c3f	ported stm32f3, close #67	2019-09-11 16:56:26 +07:00
Nathan Conrad	4f6bedeac9	Rename the STM32 MCU options.	2019-09-10 12:57:43 -04:00
Nathan Conrad	65e72de7ce	Move interrupt handler into device driver, and rename the OPT_MCU_STM32 constants.	2019-09-10 09:35:52 -04:00
Nathan Conrad	f7b0aeec52	Start clock on F0 and F0, and handle USB interrupts.	2019-09-09 19:20:26 -04:00
Nathan Conrad	d1976a30b3	Update F3 BSP and create F070RB BSP. Both are untested (but compile).	2019-09-09 16:14:38 -04:00
hathach	fae8a944f0	swith stm32h7 to use st_driver	2019-09-05 23:39:09 +07:00
hathach	1d2223a116	switch stm32f3 to use st_driver	2019-09-05 22:41:58 +07:00
hathach	e5e73ed76c	drop board_* in bsp c file ... move hw/cmsis to hw/mcu/nordic since only nrf uses it.	2019-08-23 23:35:55 +07:00
hathach	1594a9de71	stm32f411 usb work with example	2019-07-22 18:53:52 +07:00
hathach	cb8a33ca87	able to blink LED with stm32f411	2019-07-20 22:59:24 +07:00
hathach	ed698069d3	clean up	2019-07-20 22:41:45 +07:00
hathach	e909270843	rename bsp of stm32 board	2019-07-19 20:37:38 +07:00