Rafael Silva
2a17a7e8f8
rework make freertos port handling
...
this allows ports to specify a freertos port outside the FreeRTOS-Kernel lib directory, which would otherwise not be possible
Signed-off-by: Rafael Silva <rafaelsilva@ajtec.pt>
2022-06-02 09:35:30 +01:00
hathach
253430a765
add example specific DEPS_SUBMODULES
2021-03-18 16:28:44 +07:00
hathach
ed8f117dd1
explicitly add dcd source file without vendor/family
2021-03-17 16:52:07 +07:00
hathach
7d877e286a
update DEPS_SUBMODULES to optimize ci
2021-03-05 22:24:03 +07:00
hathach
590d8d4d5c
rename FAMILY_SUBMODULES to DEPS_SUBMODULES
2021-03-04 22:53:02 +07:00
hathach
b846ded487
merge no-family example build
...
specify FAMILY_SUBMODULES for all boards
2021-03-04 22:50:45 +07:00
hathach
a6efe475e7
use cmsis 5 for all stm32
2020-10-30 14:14:28 +07:00
hathach
1e02f6e066
f3 use offical st driver repo
2020-10-30 13:11:23 +07:00
Ha Thach
80c509a0f3
Merge pull request #520 from salkinium/feature/misc_enhancements
...
STM32F3 IRQ remap option and some minor improvements
2020-10-11 14:55:06 +07:00
Niklas Hauser
7fda95f508
Remap USB IRQs on STM32F303 BSP
2020-10-11 09:27:43 +02:00
hathach
ec018fbf4e
clean up jlink default interface
2020-10-08 17:17:37 +07:00
hathach
50be9d7c3a
mass rename tud/dcd_irq_handler to tud/dcd_init_handler
2020-04-17 12:27:53 +07:00
hathach
9014ca5528
move irq for stm32 fsdev
2020-04-08 16:26:14 +07:00
Nathan Conrad
07c1ce76b8
Update F3 BSP for new HAL
2020-03-28 10:58:36 -04:00
Nathan Conrad
705d43cda7
Modify include of HAL, and remove CMSIS clock configuration code, and implement UART for STM32F407Disco
2020-03-26 10:10:06 -04:00
hathach
04cf337b79
clean up flash-stlink
2020-01-10 15:09:59 +07:00
hathach
88bdb12ee5
close #204 define HSE_VALUE in _hal_conf instead of board.mk
2019-12-11 15:19:51 +07:00
hathach
f638594536
move -flto to board.mk
...
current board that doesn work with flto is spresense and mimxrt10xx (due
to xip image_vector_table is optimized out).
2019-11-20 16:06:40 +07:00
hathach
6f952a8e84
fix missing board uart read/write()
2019-10-24 12:20:06 +07:00
hathach
6183dbd0ce
add -Wextra for more warnings to example
...
non-stack warning (probably mcu driver) should be suppressed in the
board.mk
2019-09-27 00:15:43 +07:00
hathach
ff7261600c
ported stm32f2, added board stm32f207zg nucleo
...
close #127
2019-09-12 10:41:03 +07:00
hathach
de659be83e
tested all the stm32f4 board, work great
2019-09-11 17:37:23 +07:00
hathach
8a2b228c3f
ported stm32f3, close #67
2019-09-11 16:56:26 +07:00
Nathan Conrad
4f6bedeac9
Rename the STM32 MCU options.
2019-09-10 12:57:43 -04:00
Nathan Conrad
65e72de7ce
Move interrupt handler into device driver, and rename the OPT_MCU_STM32 constants.
2019-09-10 09:35:52 -04:00
Nathan Conrad
f7b0aeec52
Start clock on F0 and F0, and handle USB interrupts.
2019-09-09 19:20:26 -04:00
Nathan Conrad
d1976a30b3
Update F3 BSP and create F070RB BSP. Both are untested (but compile).
2019-09-09 16:14:38 -04:00
hathach
fae8a944f0
swith stm32h7 to use st_driver
2019-09-05 23:39:09 +07:00
hathach
1d2223a116
switch stm32f3 to use st_driver
2019-09-05 22:41:58 +07:00
hathach
e5e73ed76c
drop board_* in bsp c file
...
move hw/cmsis to hw/mcu/nordic since only nrf uses it.
2019-08-23 23:35:55 +07:00
hathach
1594a9de71
stm32f411 usb work with example
2019-07-22 18:53:52 +07:00
hathach
cb8a33ca87
able to blink LED with stm32f411
2019-07-20 22:59:24 +07:00
hathach
ed698069d3
clean up
2019-07-20 22:41:45 +07:00
hathach
e909270843
rename bsp of stm32 board
2019-07-19 20:37:38 +07:00