717 Commits

Author	SHA1	Message	Date
hathach	9fec39d893	use lpcopen for lpc43x, work well	2018-12-03 22:58:21 +07:00
hathach	bb7123eed1	use lpcopen for ea4357, blinky ok	2018-12-03 21:22:11 +07:00
hathach	7f55bbaf05	clean up	2018-12-03 18:32:06 +07:00
hathach	9e33f19378	clean up	2018-12-03 17:47:37 +07:00
hathach	63faea3929	migrate lpc17 to lpcopen, usb device work ok	2018-12-03 17:43:16 +07:00
hathach	66bd9f0a16	wrap up lpc11u port	2018-12-03 13:15:28 +07:00
hathach	f28a15a886	clean up dcd lpc11u	2018-12-03 12:31:03 +07:00
hathach	57f7c18d77	dcd lpc11u6x work with cdc + msc	2018-12-03 00:04:55 +07:00
hathach	5848dd2895	lpc11u use USBSRAM, able to response with 1st request	2018-12-02 02:13:48 +07:00
hathach	fb842bb804	lp11u able to receive setup packet	2018-12-01 22:21:54 +07:00
hathach	d246cc2e6c	lpc13xx build ok (not work) with lpcopen	2018-11-30 23:39:18 +07:00
hathach	804c60304e	adding ses lpc13xx	2018-11-30 13:25:58 +07:00
hathach	3c49bfb588	remove obsolete example	2018-11-30 13:05:20 +07:00
hathach	1f076bd945	rename cont	2018-11-30 12:59:23 +07:00
hathach	0ab62e6fa2	more rename	2018-11-30 12:57:44 +07:00
hathach	658c2ff570	rename	2018-11-30 12:56:09 +07:00
hathach	723e02780d	clean up	2018-11-30 12:51:54 +07:00
hathach	d96347a0f5	rename OPT_MCU_LPC13UXX to OPT_MCU_LPC13XX	2018-11-30 12:48:06 +07:00
hathach	522b0c11ef	move nvic prio in hal/dcd to bsp for portability	2018-11-29 22:59:00 +07:00
hathach	57b85262b2	added & tested lpc17xx freertos device example ... - add USB priority check for freeRTOS config	2018-11-29 21:41:09 +07:00
hathach	15e4b97e36	lpc17xx add dcd_edpt_stalled	2018-11-29 20:09:02 +07:00
hathach	a76c5bf154	dcd lpc17xx, route control endpoint to EP_FAST	2018-11-29 19:58:17 +07:00
hathach	ed65a43977	clean up	2018-11-29 13:09:58 +07:00
hathach	402a5fee90	dcd lpc17xx enable EpIntEn for non-control IN after DMA complete ... all transfer work well	2018-11-29 12:56:02 +07:00
hathach	c3140af274	correct TUD_OPT_HIGH_SPEED	2018-11-28 17:54:11 +07:00
hathach	772b2b692f	more dcd lpc17xx clean up	2018-11-28 17:31:15 +07:00
hathach	4a521d5085	clean up	2018-11-28 17:02:46 +07:00
hathach	04ad5da820	improve non-control xfer for lpc17xx	2018-11-28 16:53:36 +07:00
hathach	8b03b6d3b4	add Auto descriptor endpoint num config to support lpc17xx ... CFG_TUD_DESC_*_EPNUM	2018-11-28 16:10:31 +07:00
Scott Shawcroft	b4103eef06	needs to be filled out. blinks though	2018-11-27 18:11:03 -08:00
hathach	a3cc52829b	clean up	2018-11-27 23:55:10 +07:00
hathach	16b3f11d9f	clean up	2018-11-27 21:53:36 +07:00
hathach	15f704b623	improve dcd control lpc17xx	2018-11-27 21:51:02 +07:00
hathach	038851c362	enhance dcd lpc17xx. Able to pass enumeration	2018-11-27 20:48:46 +07:00
hathach	80ecf1fd54	add OPT_MODE_HIGH_SPEED	2018-11-26 14:56:07 +07:00
hathach	064eec5dd8	clean up warnings	2018-11-26 12:29:55 +07:00
Scott Shawcroft	bf70f89240	Introduce a Makefile for the OS_NONE device example ... It currently supports the SAMD21 and SAMD51 only. More will be added later.	2018-11-25 11:46:06 -08:00
Scott Shawcroft	47fabe42ed	One tweak to make -Wdiscarded-qualifiers happy.	2018-11-23 12:48:55 -08:00
Scott Shawcroft	bf8c4612dc	Make sure OUT endpoint 0 on the SAMDs always has a valid buffer to store ... a SETUP token into.	2018-11-23 11:20:23 -08:00
Scott Shawcroft	246c28db1a	Turn off interrupts when working with the event queue.	2018-11-23 11:18:53 -08:00
Scott Shawcroft	6aa0146c72	Reset USB peripheral and wait for startup	2018-11-23 11:15:39 -08:00
hathach	394a22ecf7	remove pragma GCC diagnostic	2018-11-23 15:25:25 +07:00
hathach	f196b24dce	rename DCD_XFER_SUCCESS to XFER_RESULT_SUCCESS	2018-11-23 15:22:46 +07:00
hathach	a619ff88a3	rename xfer complete enum	2018-11-23 15:17:43 +07:00
hathach	cb8782e5f2	rename tusb_event_t to xfer_result_t	2018-11-23 15:14:47 +07:00
hathach	e61e9d8b1b	nrf5x add DCD_EVENT_UNPLUGGED event	2018-11-23 15:05:40 +07:00
hathach	4e8400e6fb	more clean up	2018-11-22 21:58:06 +07:00
hathach	a1faf5c9cb	clean up dcd lpc43xx	2018-11-22 21:37:23 +07:00
hathach	569e85a0c0	cdc work ok with lpc43xx	2018-11-22 17:40:20 +07:00
hathach	60d8cde695	rename CFG_TUSB_MEM_SECTION to CFG_TUSB_MEM_SECTION	2018-11-22 17:21:07 +07:00