809 Commits

Author SHA1 Message Date
Jerzy Kasenberg
62a76c0e04 nrf52: Fix edpt_dma_start() wrong condition check
Operator < used in while condition was obviously incorrect.
Loop starts with checking if unsigned variable is less then 0.
This condition is always false.

This reverses condition to follow intention of of the code.
2020-09-15 16:08:23 +02:00
Reinhard Panhuber
4e789b240d Start of sampling works. 2020-09-06 11:37:59 +02:00
Reinhard Panhuber
12562fc966 Merge remote-tracking branch 'upstream/master' into uac2 2020-09-04 16:23:39 +02:00
Ha Thach
19f08a02f6
Merge pull request #486 from kasjer/kasjer/add-endpoint-close-to-synopsys
Add dcd_edpt_close() to synopsys
2020-08-24 13:10:46 +07:00
hathach
9d3a9cf546 add OPT_MCU_SAMD11
skip ci build for example that need more ROM/RAM could fit into SAMD11
2020-08-22 18:46:19 +07:00
Reinhard Panhuber
37be0ca732 Fix formatting, get rid of all tabs. 2020-08-20 20:09:44 +02:00
Reinhard Panhuber
c14f68e2c1 Commit before sharing.
Setup a test example - UNTESTED!
Missing: Start transmitting audio data in set_interface.
2020-08-19 21:07:43 +02:00
Reinhard Panhuber
6309364722 Merge remote-tracking branch 'upstream/master' into uac2
Conflicts:
	src/device/usbd.c
	src/device/usbd.h
	src/portable/st/synopsys/dcd_synopsys.c
2020-08-16 14:08:24 +02:00
Reinhard Panhuber
444e4d2821 Add EP close. Fix bug in set_interface within audio. 2020-08-16 13:48:25 +02:00
Jerzy Kasenberg
e8d50a3c57 Add dcd_edpt_close() to synopsys
Endpoint close was implemented only in one driver so far.
This function is needed for interfaces with several alternate settings.

The way FIFO is allocated in dcd_edpt_open() allows to correctly close
only one IN endpoint (the one that was opened last).
2020-08-14 14:29:35 +02:00
Jerzy Kasenberg
88c5e2a37f Fix synopsys fifo flush during stall
Wrong FIFO was flushed in dcd_edpt_stall().
(epnum - 1) should only be used when accessing DIEPTXF registers.

For DIEPCTL and GRSTCTL epnum is correct index.
2020-08-12 10:26:36 +02:00
Ha Thach
6f3378f71d
Merge pull request #476 from kasjer/kasjer/fix-synopsys-fix-iso-frame-bit
Fix synopsys odd/even frame bit for IN ISO endpoints
2020-08-05 22:36:05 +07:00
Jerzy Kasenberg
e9aa36a6e8 Fix synopsys odd/even frame bit for IN ISO endpoints
For ISO endpoint driver has to specify when data
is to be transmitted (odd or even frame).
Currently code was not updating this bit resulting in
data being sent every other frame.
If interval was 1ms full data packed was sent every 2ms, and
ZLP was sent in between.
2020-08-04 09:32:41 +02:00
hathach
7d9efd0697 manually submit unplugged event for nrf dcd_disconnect() 2020-08-04 14:18:12 +07:00
Ha Thach
026a1e7ac8
Merge pull request #478 from hathach/move-dcdconnect-to-dcdinit
Move pull-up enabling to dcd_init() instead of usbd
2020-08-04 14:11:32 +07:00
Reinhard Panhuber
c557bf7b2e Implement dynamic FIFO RAM allocation according to configuration desc. 2020-08-03 19:48:05 +02:00
Ha Thach
72464faca4
Merge pull request #472 from hathach/fix-msp430-warning
fix msp430 gcc 9.2.0 warning
2020-08-02 12:53:03 +07:00
hathach
acde49ccc9
enable pull-up in dcd_init() instead of usbd 2020-08-01 20:14:58 +07:00
Ha Thach
310797a580
Merge pull request #477 from hathach/fix-nrf-unplugg-isr-event
correct isr context for nrf DCD_EVENT_UNPLUGGED
2020-08-01 12:31:48 +07:00
hathach
9bf2b33366
correct isr context for nrf DCD_EVENT_UNPLUGGED
also rename debug lookup to prevent conflict
2020-08-01 12:02:59 +07:00
Jerzy Kasenberg
c3b0389f10 Fix synopsys size check for ISO endpoint
Constraint was incorrect for ISO endpoint as stated in TODO.
2020-07-31 15:52:21 +02:00
hathach
10a8ef7614
fix nested extern declaration of 'SystemCoreClock' [-Werror=nested-externs] 2020-07-29 17:04:47 +07:00
hathach
5af08e2ffc
fix strict prototype 2020-07-29 16:59:07 +07:00
Ha Thach
8dda0a0dd1
Merge pull request #454 from me-no-dev/esp32-s2-fifos
ESP32-S2: Handle the fact that available EP IN FIFOs are less than the number of available EP INs
2020-07-28 15:16:15 +07:00
me-no-dev
a1a390a788 Update dcd_esp32s2.c 2020-07-28 10:54:23 +03:00
hathach
6976e64217 fix msp430 gcc 9.2.0 warning in #465 2020-07-28 14:36:15 +07:00
Reinhard Panhuber
01903a4a6d Implement dynamic reallocation of RX and TX fifos for EP0.
Tested with EP0 size 8/16/32/64.
2020-07-27 21:03:20 +02:00
Reinhard Panhuber
5e3f90cd6e add 'set_EP0_max_pkt_size(...)' and fix EP0 size to 64 bytes after reset 2020-07-26 19:21:30 +02:00
hathach
0407cfe16c fix samd21 race condition with setup packet
reproduced with Adafruit_TinyUSB_ArduinoCore port commit 11d669b4d2a40eb2fc5e51b2a9707a6de9d42363 and SAMD BSP 1.6.1
2020-07-23 01:39:15 +07:00
hathach
7baeea7a00 update actual link speed for spresense 2020-07-17 18:28:19 +07:00
hathach
dc00f0cae1
update link speed detection for nuc505 2020-07-16 20:44:06 +07:00
hathach
0517f4a2f1
dcd tdi report link speed on reset 2020-07-16 16:12:21 +07:00
Ha Thach
81392da1ea
Merge pull request #456 from me-no-dev/esp32-s2-epin-to
ESP32-S2: Detect EP IN Xfer Timeout
2020-07-10 12:29:06 +07:00
hathach
0fd074afd8
change REDUCE_SPEED=0/1 to explicitly SPEED=high/full
update readme, boards.md to add link to new stm boards
2020-07-08 16:29:48 +07:00
Ha Thach
a192d99bf0
Merge pull request #457 from UweBonnes/add-stm-hs
Add stm hs
2020-07-05 14:07:08 +07:00
Uwe Bonnes
fd38178189 STM32/OTG_HS: Allow OTG_HS port to run at FS speed.
Add "REDUCE_SPEED=1" to the compile options.
2020-07-03 10:52:57 +02:00
hathach
ad5ae8c31d
update per review 2020-07-03 14:50:39 +07:00
hathach
a09a86d299
fix NVIC disable typo 2020-07-03 01:19:02 +07:00
me-no-dev
d493724a7b ESP32-S2: Detect EP IN Xfer Timeout
In some rare ocasions (bad cable, noise, etc.) data transfer might timeout and hang the endpoint, unless the interrupt flag is cleared.
This pull request targets to solve that case.
2020-07-02 13:05:17 +03:00
hathach
4cec866994
correct HSE_VALUE in hal_conf
- although it is define in CFLAGS, it is worth to correct to be
consistent with other build
- extract set_speed()
2020-07-02 14:57:00 +07:00
hathach
9a290febcd
change default port some stm bsp
- f769disco default port is highspeed port1
- remove PORT0 on stlink since the board only populated HS connector
2020-07-02 11:58:40 +07:00
hathach
4966fb2e13 clean up 2020-07-02 01:25:21 +07:00
hathach
c2289777f7 Merge branch 'add-stm-hs' of github.com:hathach/tinyusb into add-stm-hs 2020-07-01 23:53:33 +07:00
Uwe Bonnes
196bdbc702 st/synopsys/dcd_synopsys.c: Remove USBC PHY PLL stabilization delay for now
While the ST code has a 2 ms stabilization delay for the USBC PHY PLL,
running without this delay showed no problem for at leat 10 USB un/replug
cycles. Observe for problems!
2020-07-01 14:45:07 +02:00
hathach
d2450abaaf only set turnaround in reset complete 2020-07-01 18:51:04 +07:00
hathach
e3974d6869 correctly set turn around according to cpu clock
help to run with low speed mcu
2020-07-01 18:44:52 +07:00
hathach
a512a31c9d Merge branch 'master' into add-stm-hs 2020-07-01 17:58:02 +07:00
hathach
ed1b670c55 clean up code 2020-07-01 17:57:37 +07:00
me-no-dev
6178f8de2f ESP32-S2: Handle the fact that available EP IN FIFOs are less than the number of available EP INs
ESP32-S2 has only 5 available endpoint-in FIFOs (including EP0) but 7 available EP IN numbers. This change decouples the fifo number from the endpoint number, providing FIFO numbers until they reach the limit, at which point it will return false and assert an error that too many endpoints were allocated.
2020-07-01 13:38:59 +03:00
Jan Dümpelmann
378e6aab8c Clear ep0_pending if rx short packet 2020-06-30 17:56:25 +02:00