Embedded/tinyusb
1
0
Fork 0
mirror of https://github.com/hathach/tinyusb.git synced 2025-01-24 05:42:57 +08:00
Code Issues Packages Projects Releases Wiki Activity
3,352 Commits 10 Branches 15 Tags
Commit Graph

1139 Commits

Author SHA1 Message Date
Uwe Bonnes
fd38178189 STM32/OTG_HS: Allow OTG_HS port to run at FS speed. 
Add "REDUCE_SPEED=1" to the compile options.
 2020-07-03 10:52:57 +02:00
hathach
4cec866994
correct HSE_VALUE in hal_conf 
- although it is define in CFLAGS, it is worth to correct to be
consistent with other build
- extract set_speed()
 2020-07-02 14:57:00 +07:00
hathach
9a290febcd
change default port some stm bsp 
- f769disco default port is highspeed port1
- remove PORT0 on stlink since the board only populated HS connector
 2020-07-02 11:58:40 +07:00
hathach
4966fb2e13 clean up 2020-07-02 01:25:21 +07:00
hathach
c2289777f7 Merge branch 'add-stm-hs' of github.com:hathach/tinyusb into add-stm-hs 2020-07-01 23:53:33 +07:00
Uwe Bonnes
196bdbc702 st/synopsys/dcd_synopsys.c: Remove USBC PHY PLL stabilization delay for now 
While the ST code has a 2 ms stabilization delay for the USBC PHY PLL,
running without this delay showed no problem for at leat 10 USB un/replug
cycles. Observe for problems!
 2020-07-01 14:45:07 +02:00
hathach
d2450abaaf only set turnaround in reset complete 2020-07-01 18:51:04 +07:00
hathach
e3974d6869 correctly set turn around according to cpu clock 
help to run with low speed mcu
 2020-07-01 18:44:52 +07:00
hathach
a512a31c9d Merge branch 'master' into add-stm-hs 2020-07-01 17:58:02 +07:00
hathach
ed1b670c55 clean up code 2020-07-01 17:57:37 +07:00
Jan Dümpelmann
378e6aab8c Clear ep0_pending if rx short packet 2020-06-30 17:56:25 +02:00
Jan Dümpelmann
9e35ef73f7 Fix receiving of short packet data (ep out) 2020-06-30 12:55:39 +02:00
Uwe Bonnes
30a18e2605 stm32f723disco: USB HS enumerates. 2020-06-30 11:07:53 +02:00
Uwe Bonnes
05bfd9ac4a dcd_synopsys: Handle HS and FS IP in one device 
FIXME: Allow run-time selection to allow to handle both HS and FS with
one file

F746 HS port enumerates with error
config 1 interface 2 altsetting 0 bulk endpoint 0x3 has invalid maxpacket 64
 2020-06-30 11:02:41 +02:00
hathach
ab75998316 Merge branch 'master' into add-stm-hs 2020-06-30 01:55:57 +07:00
Ha Thach
05996aee64
Merge pull request #427 from kasjer/kasjer/add-da1469x-support 
Support for DA1469x MCU from Dialog Semiconductor
 2020-06-30 01:20:56 +07:00
Ha Thach
268ab9eaa8
Merge pull request #399 from duempel/redesign_synopsys_receive 
Improvements to Synopsys EP OUT
 2020-06-29 16:02:40 +07:00
Jan Dümpelmann
99df7789a7 Add author name to dcd_synopsys.c 2020-06-29 10:55:03 +02:00
Jan Dümpelmann
4f69bcea7e Remove EP0 remaining bytes manipulation 
Renaming edpt_xact to edpt_schedule_packets
 2020-06-26 17:18:25 +02:00
Jeff Epler
b2ef8cdd42 dcd_samd: Provide implementation for OPT_MCU_SAME5X 2020-06-25 18:51:04 -05:00
hathach
d4d6e06c1d added OPT_MCU_SAME5X option 2020-06-24 00:53:17 +07:00
Jan Dümpelmann
067287ef91 Add transaction (edpt_xact) as sub transfer 
A transfer can have one or multiple transactions.
Usually only EP0 splits one xfer into multiple xact.
 2020-06-18 17:18:28 +02:00
Mengsk
9ffb9b69a4 Disable SOF in dcd_stm32_fsdev 
Signed-off-by: Mengsk <admin@hifiphile.com>
 2020-06-18 14:18:00 +02:00
Mengsk
57b553e023 Fix IAR warnings. 
Pa039 : use of address of unaligned structure member.
Pe188: enumerated type mixed with another type.
 2020-06-17 10:08:33 +02:00
hathach
2b1c7730b7 fix hs port1 build with net endpoint 2020-06-16 00:53:06 +07:00
hathach
667eaa6dd6 fix stm32h743 priority with freeRTOS 2020-06-16 00:03:52 +07:00
hathach
2dd1be13e5 Enhance EP FIFO allocation for both Fullspeed and Highspeed 
- Update shared RX FIFO calculation with FS/HS
- IN FIFO EP
  - Interrupt -> use EPSize
  - Bulk/ISO  -> use  max(EPSize, remaining-fifo / non-opened-EPIN)
 2020-06-15 23:17:49 +07:00
Reinhard Panhuber
bc7e24b659 Fix wrong comment for IAD checks. 2020-06-14 14:22:10 +02:00
Jan Dümpelmann
4399dd1b06 cherry pick PR399 commit : Interrupt time improvements 2020-06-14 19:13:31 +07:00
hathach
f438aedccb overwrite setup packet 2020-06-14 18:29:38 +07:00
hathach
95966c2201 improve usbd log for control transfer 2020-06-14 18:29:02 +07:00
hathach
a347de6e50 revert CFG_TUSB_RHPORT0_MODE to previous way 2020-06-14 18:28:45 +07:00
Reinhard Panhuber
b25bbf4776 Fix alignment. 2020-06-14 12:58:16 +02:00
Reinhard Panhuber
3012175351 Fix alignment. 2020-06-14 12:57:00 +02:00
Reinhard Panhuber
48b2e6cf78 Fix too strict checks on subclass and interface of iad descriptor. 2020-06-13 13:51:50 +02:00
Jerzy Kasenberg
0635bafe0a Add DCD for Dialog DA1469x MCU 
Dialog Semiconductor's BLE MCU DA1469x comes with full speed USB.
It's base on National Semiconductor discrete USB controller USBN9603/4.

This adds support for:
- control/interrupt/bulk endpoints (up to 64 bytes)
- ISO endpoint were not tested and may not work correctly
- reset/sleep/wakeup are handled
- code for VBUS changes is provided
 2020-06-09 15:55:46 +02:00
hathach
e92118635c adding speed detect on bus reset 2020-06-01 13:40:18 +07:00
hathach
710c54f8cb allow hs ep open with 512 bytes 2020-06-01 01:36:09 +07:00
hathach
f771afe6af fixed EP0 size to 64 since LS is not supported in device mode 
- set turn-around and report actual speed in Enum Done
- add dcd_event_bus_reset() helper to report speed
 2020-05-31 23:43:29 +07:00
hathach
5ffba8536d able to detect as hs 2020-05-31 19:41:22 +07:00
Ha Thach
5efeaf2ac1
Merge pull request #413 from kasjer/kasjer/ble-over-usb 
Bluetooth HCI transport over USB
 2020-05-31 15:07:56 +07:00
hathach
d6d29897f3 add get device qualifier descriptor 2020-05-28 23:16:16 +07:00
Jerzy Kasenberg
56d46483e4 Add bt hci device class 
Code implements USB transport for bluetooth HCI.
 2020-05-28 10:58:49 +02:00
Jerzy Kasenberg
077437b3dc Add non standard request handling in class 
For some reason bluetooth stack implementations send class requests
to device instead of interface.
To implement HCI interface over USB non device addressed requests
for class need to be handled.
 2020-05-28 10:11:37 +02:00
hathach
53b749fd72 check max_len for vendor and hid 2020-05-28 14:44:26 +07:00
hathach
fb214f7cf7 rename to drv_len to be consistent 2020-05-28 13:57:49 +07:00
hathach
10cd3f24bf initial transfer failed in open() shouldn't cause the driver open to fail. 2020-05-28 13:48:02 +07:00
hathach
c1db36a15c
update vendor open() 2020-05-28 12:19:06 +07:00
hathach
bec5b5f9da
update usbtmc open() 2020-05-28 12:13:48 +07:00
hathach
13860e9f94
update net open() 2020-05-28 11:51:25 +07:00