mirror of
https://github.com/hathach/tinyusb.git
synced 2025-01-31 05:52:55 +08:00
73b0047efc
Don't mark IN buffers as available during the last 200us of a full-speed frame. This avoids a situation seen with the USB2.0 hub on a Raspberry Pi 4 where a late IN token before the next full-speed SOF can cause port babble and a corrupt ACK packet. The nature of the data corruption has a chance to cause device lockup. Use the next SOF to mark delayed buffers as available. This reduces available Bulk IN bandwidth by approximately 20%, and requires that the SOF interrupt is enabled while these transfers are ongoing. Inherit the top-level enable from the corresponding Pico-SDK flag. Applications that will not use the device in a situation where it could be plugged into a Pi 4 or Pi 400 (for example, when directly connected to a commodity hub or other host) can turn off the flag in the SDK. v2: use a field in hw_endpoint to mark pending. v3: Partial rewrite following review comments - Stub functions out if the workaround is not required - Only force-enable SOF while any vulnerable endpoints are active - Respect dcd_sof_enable() functionality - Get rid of all but necessary ifdef hackery - Fix a bug where the "endpoint lock" was used with an uninitialised pointer.