mirror of
https://github.com/hathach/tinyusb.git
synced 2025-01-17 05:32:55 +08:00
326 lines
8.8 KiB
C
326 lines
8.8 KiB
C
/*
|
|
* The MIT License (MIT)
|
|
*
|
|
* Copyright (c) 2021, Koji Kitayama
|
|
*
|
|
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
|
* of this software and associated documentation files (the "Software"), to deal
|
|
* in the Software without restriction, including without limitation the rights
|
|
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
|
* copies of the Software, and to permit persons to whom the Software is
|
|
* furnished to do so, subject to the following conditions:
|
|
*
|
|
* The above copyright notice and this permission notice shall be included in
|
|
* all copies or substantial portions of the Software.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
|
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
|
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
|
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
|
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
|
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
|
* THE SOFTWARE.
|
|
*
|
|
* This file is part of the TinyUSB stack.
|
|
*/
|
|
|
|
/* How to connect JLink and RX65n Target and option board
|
|
* (For original comment https://github.com/hathach/tinyusb/pull/922#issuecomment-869786131)
|
|
*
|
|
* To enable JTAG, RX65N requires following connections on main board.
|
|
* - short EJ2 jumper header, to disable onboard E2L.
|
|
* - short EMLE(J1-2) and 3V3(J1-14 or J2-10), to enable In-Circuit Emulator.
|
|
*
|
|
* Note: For RX65N-Cloud-Kit, the option board's JTAG pins to some switches or floating.
|
|
* To use JLink with the option board, I think some further modifications will be necessary.
|
|
*
|
|
* | Function | RX65N pin | main board | option board | JLink connector |
|
|
* |:---------:|:----------:|:----------:|:------------:|:---------------:|
|
|
* | 3V3 | VCC | J1-14 | CN5-6 | 1 |
|
|
* | TRST | P34 | J1-16 | CN5-7 | 3 |
|
|
* | GND | VSS | J1-12 | CN5-5 | 4 |
|
|
* | TDI | P30 | J1-20 | CN5-10 | 5 |
|
|
* | TMS | P31 | J1-19 | USER_SW | 7 |
|
|
* | TCK/FINEC | P27 | J1-21 | N/A | 9 |
|
|
* | TDO | P26 | J1-22 | CN5-9 | 13 |
|
|
* | nRES | RES# | J1-10 | RESET_SW | 15 |
|
|
*
|
|
* JLink firmware needs to update to V6.96 or newer version to avoid
|
|
* [a bug](https://forum.segger.com/index.php/Thread/7758-SOLVED-Bug-in-JLink-from-V6-88b-regarding-RX65N)
|
|
* regarding downloading.
|
|
*/
|
|
|
|
#include "bsp/board.h"
|
|
#include "iodefine.h"
|
|
#include "interrupt_handlers.h"
|
|
|
|
#define IRQ_PRIORITY_CMT0 5
|
|
#define IRQ_PRIORITY_USBI0 6
|
|
#define IRQ_PRIORITY_SCI5 5
|
|
|
|
#define SYSTEM_PRCR_PRC1 (1<<1)
|
|
#define SYSTEM_PRCR_PRKEY (0xA5u<<8)
|
|
|
|
#define CMT_PCLK 60000000
|
|
#define CMT_CMCR_CKS_DIV_128 2
|
|
#define CMT_CMCR_CMIE (1<<6)
|
|
#define MPC_PFS_ISEL (1<<6)
|
|
|
|
#define SCI_PCLK 60000000
|
|
#define SCI_SSR_FER (1<<4)
|
|
#define SCI_SSR_ORER (1<<5)
|
|
|
|
#define SCI_SCR_TEIE (1u<<2)
|
|
#define SCI_SCR_RE (1u<<4)
|
|
#define SCI_SCR_TE (1u<<5)
|
|
#define SCI_SCR_RIE (1u<<6)
|
|
#define SCI_SCR_TIE (1u<<7)
|
|
#define INT_Excep_SCI5_TEI5 INT_Excep_ICU_GROUPBL0
|
|
|
|
#define IRQ_USB0_USBI0 62
|
|
#define SLIBR_USBI0 SLIBR185
|
|
#define IPR_USB0_USBI0 IPR_PERIB_INTB185
|
|
#define INT_Excep_USB0_USBI0 INT_Excep_PERIB_INTB185
|
|
|
|
void HardwareSetup(void)
|
|
{
|
|
FLASH.ROMCIV.WORD = 1;
|
|
while (FLASH.ROMCIV.WORD) ;
|
|
FLASH.ROMCE.WORD = 1;
|
|
while (!FLASH.ROMCE.WORD) ;
|
|
|
|
SYSTEM.PRCR.WORD = 0xA503u;
|
|
if (!SYSTEM.RSTSR1.BYTE) {
|
|
RTC.RCR4.BYTE = 0;
|
|
RTC.RCR3.BYTE = 12;
|
|
while (12 != RTC.RCR3.BYTE) ;
|
|
}
|
|
SYSTEM.SOSCCR.BYTE = 1;
|
|
|
|
if (SYSTEM.HOCOCR.BYTE) {
|
|
SYSTEM.HOCOCR.BYTE = 0;
|
|
while (!SYSTEM.OSCOVFSR.BIT.HCOVF) ;
|
|
}
|
|
SYSTEM.PLLCR.WORD = 0x1D10u; /* HOCO x 15 */
|
|
SYSTEM.PLLCR2.BYTE = 0;
|
|
while (!SYSTEM.OSCOVFSR.BIT.PLOVF) ;
|
|
|
|
SYSTEM.SCKCR.LONG = 0x21C11222u;
|
|
SYSTEM.SCKCR2.WORD = 0x0041u;
|
|
SYSTEM.ROMWT.BYTE = 0x02u;
|
|
while (0x02u != SYSTEM.ROMWT.BYTE) ;
|
|
SYSTEM.SCKCR3.WORD = 0x400u;
|
|
SYSTEM.PRCR.WORD = 0xA500u;
|
|
}
|
|
|
|
//--------------------------------------------------------------------+
|
|
// SCI handling
|
|
//--------------------------------------------------------------------+
|
|
typedef struct {
|
|
uint8_t *buf;
|
|
uint32_t cnt;
|
|
} sci_buf_t;
|
|
static volatile sci_buf_t sci_buf[2];
|
|
|
|
void INT_Excep_SCI5_TXI5(void)
|
|
{
|
|
uint8_t *buf = sci_buf[0].buf;
|
|
uint32_t cnt = sci_buf[0].cnt;
|
|
|
|
if (!buf || !cnt) {
|
|
SCI5.SCR.BYTE &= ~(SCI_SCR_TEIE | SCI_SCR_TE | SCI_SCR_TIE);
|
|
return;
|
|
}
|
|
SCI5.TDR = *buf;
|
|
if (--cnt) {
|
|
++buf;
|
|
} else {
|
|
buf = NULL;
|
|
SCI5.SCR.BIT.TIE = 0;
|
|
SCI5.SCR.BIT.TEIE = 1;
|
|
}
|
|
sci_buf[0].buf = buf;
|
|
sci_buf[0].cnt = cnt;
|
|
}
|
|
|
|
void INT_Excep_SCI5_TEI5(void)
|
|
{
|
|
SCI5.SCR.BYTE &= ~(SCI_SCR_TEIE | SCI_SCR_TE | SCI_SCR_TIE);
|
|
}
|
|
|
|
void INT_Excep_SCI5_RXI5(void)
|
|
{
|
|
uint8_t *buf = sci_buf[1].buf;
|
|
uint32_t cnt = sci_buf[1].cnt;
|
|
|
|
if (!buf || !cnt ||
|
|
(SCI5.SSR.BYTE & (SCI_SSR_FER | SCI_SSR_ORER))) {
|
|
sci_buf[1].buf = NULL;
|
|
SCI5.SSR.BYTE = 0;
|
|
SCI5.SCR.BYTE &= ~(SCI_SCR_RE | SCI_SCR_RIE);
|
|
return;
|
|
}
|
|
*buf = SCI5.RDR;
|
|
if (--cnt) {
|
|
++buf;
|
|
} else {
|
|
buf = NULL;
|
|
SCI5.SCR.BYTE &= ~(SCI_SCR_RE | SCI_SCR_RIE);
|
|
}
|
|
sci_buf[1].buf = buf;
|
|
sci_buf[1].cnt = cnt;
|
|
}
|
|
|
|
//--------------------------------------------------------------------+
|
|
// Forward USB interrupt events to TinyUSB IRQ Handler
|
|
//--------------------------------------------------------------------+
|
|
void INT_Excep_USB0_USBI0(void)
|
|
{
|
|
#if TUSB_OPT_HOST_ENABLED
|
|
tuh_int_handler(0);
|
|
#endif
|
|
#if TUSB_OPT_DEVICE_ENABLED
|
|
tud_int_handler(0);
|
|
#endif
|
|
}
|
|
|
|
void board_init(void)
|
|
{
|
|
/* setup software configurable interrupts */
|
|
ICU.SLIBR_USBI0.BYTE = IRQ_USB0_USBI0;
|
|
ICU.SLIPRCR.BYTE = 1;
|
|
|
|
#if CFG_TUSB_OS == OPT_OS_NONE
|
|
/* Enable CMT0 */
|
|
SYSTEM.PRCR.WORD = SYSTEM_PRCR_PRKEY | SYSTEM_PRCR_PRC1;
|
|
MSTP(CMT0) = 0;
|
|
SYSTEM.PRCR.WORD = SYSTEM_PRCR_PRKEY;
|
|
/* Setup 1ms tick timer */
|
|
CMT0.CMCNT = 0;
|
|
CMT0.CMCOR = CMT_PCLK / 1000 / 128;
|
|
CMT0.CMCR.WORD = CMT_CMCR_CMIE | CMT_CMCR_CKS_DIV_128;
|
|
IR(CMT0, CMI0) = 0;
|
|
IPR(CMT0, CMI0) = IRQ_PRIORITY_CMT0;
|
|
IEN(CMT0, CMI0) = 1;
|
|
CMT.CMSTR0.BIT.STR0 = 1;
|
|
#endif
|
|
|
|
/* Unlock MPC registers */
|
|
MPC.PWPR.BIT.B0WI = 0;
|
|
MPC.PWPR.BIT.PFSWE = 1;
|
|
// SW PB1
|
|
PORTB.PMR.BIT.B1 = 0U;
|
|
PORTB.PDR.BIT.B1 = 0U;
|
|
// LED PD6
|
|
PORTD.PODR.BIT.B6 = 1U;
|
|
PORTD.ODR1.BIT.B4 = 1U;
|
|
PORTD.PMR.BIT.B6 = 0U;
|
|
PORTD.PDR.BIT.B6 = 1U;
|
|
/* UART TXD5 => PA4, RXD5 => PA3 */
|
|
PORTA.PMR.BIT.B4 = 1U;
|
|
PORTA.PCR.BIT.B4 = 1U;
|
|
MPC.PA4PFS.BYTE = 0b01010;
|
|
PORTA.PMR.BIT.B3 = 1U;
|
|
MPC.PA5PFS.BYTE = 0b01010;
|
|
/* USB VBUS -> P16 */
|
|
PORT1.PMR.BIT.B6 = 1U;
|
|
MPC.P16PFS.BYTE = MPC_PFS_ISEL | 0b10001;
|
|
/* Lock MPC registers */
|
|
MPC.PWPR.BIT.PFSWE = 0;
|
|
MPC.PWPR.BIT.B0WI = 1;
|
|
|
|
/* Enable SCI5 */
|
|
SYSTEM.PRCR.WORD = SYSTEM_PRCR_PRKEY | SYSTEM_PRCR_PRC1;
|
|
MSTP(SCI5) = 0;
|
|
SYSTEM.PRCR.WORD = SYSTEM_PRCR_PRKEY;
|
|
SCI5.SEMR.BIT.ABCS = 1;
|
|
SCI5.SEMR.BIT.BGDM = 1;
|
|
SCI5.BRR = (SCI_PCLK / (8 * 115200)) - 1;
|
|
IR(SCI5, RXI5) = 0;
|
|
IR(SCI5, TXI5) = 0;
|
|
IS(SCI5, TEI5) = 0;
|
|
IR(ICU, GROUPBL0) = 0;
|
|
IPR(SCI5, RXI5) = IRQ_PRIORITY_SCI5;
|
|
IPR(SCI5, TXI5) = IRQ_PRIORITY_SCI5;
|
|
IPR(ICU,GROUPBL0) = IRQ_PRIORITY_SCI5;
|
|
IEN(SCI5, RXI5) = 1;
|
|
IEN(SCI5, TXI5) = 1;
|
|
IEN(ICU,GROUPBL0) = 1;
|
|
EN(SCI5, TEI5) = 1;
|
|
|
|
/* setup USBI0 interrupt. */
|
|
IR(USB0, USBI0) = 0;
|
|
IPR(USB0, USBI0) = IRQ_PRIORITY_USBI0;
|
|
}
|
|
|
|
//--------------------------------------------------------------------+
|
|
// Board porting API
|
|
//--------------------------------------------------------------------+
|
|
|
|
void board_led_write(bool state)
|
|
{
|
|
PORTD.PODR.BIT.B6 = state ? 0 : 1;
|
|
}
|
|
|
|
uint32_t board_button_read(void)
|
|
{
|
|
return PORTB.PIDR.BIT.B1 ? 0 : 1;
|
|
}
|
|
|
|
int board_uart_read(uint8_t* buf, int len)
|
|
{
|
|
sci_buf[1].buf = buf;
|
|
sci_buf[1].cnt = len;
|
|
SCI5.SCR.BYTE |= SCI_SCR_RE | SCI_SCR_RIE;
|
|
while (SCI5.SCR.BIT.RE) ;
|
|
return len - sci_buf[1].cnt;
|
|
}
|
|
|
|
int board_uart_write(void const *buf, int len)
|
|
{
|
|
sci_buf[0].buf = (uint8_t*)(uintptr_t) buf;
|
|
sci_buf[0].cnt = len;
|
|
SCI5.SCR.BYTE |= SCI_SCR_TE | SCI_SCR_TIE;
|
|
while (SCI5.SCR.BIT.TE) ;
|
|
return len;
|
|
}
|
|
|
|
#if CFG_TUSB_OS == OPT_OS_NONE
|
|
volatile uint32_t system_ticks = 0;
|
|
void INT_Excep_CMT0_CMI0(void)
|
|
{
|
|
++system_ticks;
|
|
}
|
|
|
|
uint32_t board_millis(void)
|
|
{
|
|
return system_ticks;
|
|
}
|
|
#else
|
|
uint32_t SystemCoreClock = 120000000;
|
|
#endif
|
|
|
|
int close(int fd)
|
|
{
|
|
(void)fd;
|
|
return -1;
|
|
}
|
|
int fstat(int fd, void *pstat)
|
|
{
|
|
(void)fd;
|
|
(void)pstat;
|
|
return 0;
|
|
}
|
|
off_t lseek(int fd, off_t pos, int whence)
|
|
{
|
|
(void)fd;
|
|
(void)pos;
|
|
(void)whence;
|
|
return 0;
|
|
}
|
|
int isatty(int fd)
|
|
{
|
|
(void)fd;
|
|
return 1;
|
|
}
|