mirror of
https://github.com/hathach/tinyusb.git
synced 2025-01-31 05:52:55 +08:00
63 lines
1.9 KiB
Makefile
63 lines
1.9 KiB
Makefile
MCU_DIR = hw/mcu/dialog/da1469x
|
|
|
|
include $(TOP)/$(BOARD_PATH)/board.mk
|
|
|
|
CFLAGS += \
|
|
-flto \
|
|
-mthumb \
|
|
-mthumb-interwork \
|
|
-mabi=aapcs \
|
|
-mcpu=cortex-m33+nodsp \
|
|
-mfloat-abi=hard \
|
|
-mfpu=fpv5-sp-d16 \
|
|
-DCORE_M33 \
|
|
-DCFG_TUSB_MCU=OPT_MCU_DA1469X \
|
|
-DCFG_TUD_ENDPOINT0_SIZE=8\
|
|
|
|
LDFLAGS_GCC += \
|
|
-nostdlib \
|
|
--specs=nosys.specs --specs=nano.specs
|
|
|
|
# All source paths should be relative to the top level.
|
|
LD_FILE = $(FAMILY_PATH)/linker/da1469x.ld
|
|
|
|
# While this is for da1469x chip, there is chance that da1468x chip family will also work
|
|
SRC_C += \
|
|
src/portable/dialog/da146xx/dcd_da146xx.c \
|
|
${MCU_DIR}/src/system_da1469x.c \
|
|
${MCU_DIR}/src/da1469x_clock.c \
|
|
${MCU_DIR}/src/hal_gpio.c \
|
|
|
|
SRC_S += $(FAMILY_PATH)/gcc_startup_da1469x.S
|
|
|
|
INC += \
|
|
$(TOP)/$(BOARD_PATH) \
|
|
$(TOP)/${MCU_DIR}/include \
|
|
$(TOP)/${MCU_DIR}/SDK_10.0.8.105/sdk/bsp/include
|
|
|
|
# For freeRTOS port source
|
|
FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM33_NTZ/non_secure
|
|
|
|
# flash using jlink but with some twists
|
|
flash: flash-dialog
|
|
|
|
# SDK_BINARY_PATH is the path to the SDK binary files
|
|
SDK_BINARY_PATH = $(HOME)/code/tinyusb-mcu-driver/dialog/SDK_10.0.8.105/binaries
|
|
MKIMAGE = $(SDK_BINARY_PATH)/mkimage
|
|
|
|
$(BUILD)/$(PROJECT)-image.bin: $(BUILD)/$(PROJECT).bin
|
|
@echo '#define SW_VERSION "v_1.0.0.1"' >$(BUILD)/version.h
|
|
@echo '#define SW_VERSION_DATE "'`date +"%Y-%m-%d %H:%M"`'"' >> $(BUILD)/version.h
|
|
$(MKIMAGE) da1469x $^ $(BUILD)/version.h $^.img
|
|
cp $(TOP)/$(FAMILY_PATH)/product_header.dump $(BUILD)/$(PROJECT)-image.bin
|
|
cat $^.img >> $(BUILD)/$(PROJECT)-image.bin
|
|
|
|
flash-dialog: $(BUILD)/$(PROJECT)-image.bin
|
|
@echo r > $(BUILD)/$(BOARD).jlink
|
|
@echo halt >> $(BUILD)/$(BOARD).jlink
|
|
@echo loadfile $^ 0x16000000 >> $(BUILD)/$(BOARD).jlink
|
|
@echo r >> $(BUILD)/$(BOARD).jlink
|
|
@echo go >> $(BUILD)/$(BOARD).jlink
|
|
@echo exit >> $(BUILD)/$(BOARD).jlink
|
|
$(JLINKEXE) -device $(JLINK_DEVICE) -if $(JLINK_IF) -JTAGConf -1,-1 -speed auto -CommandFile $(BUILD)/$(BOARD).jlink
|