mirror of
https://github.com/hathach/tinyusb.git
synced 2025-01-17 05:32:55 +08:00
156 lines
5.1 KiB
Markdown
156 lines
5.1 KiB
Markdown
# TinyUSB Changelog
|
|
|
|
## Master branch (WIP)
|
|
|
|
### Breaking
|
|
|
|
- TinyUSB does not directly implement USB IRQ Handler function anymore. Application must implement IRQ Handler and invoke `tud_int_handler(rhport)`. This is due to:
|
|
- IRQ Handler name can be different across system depending on the startup
|
|
- Some OS need to execute enterISR()/exitISR() to work properly, also tracing tool may need to insert trace ISR enter/exit to record usb event
|
|
- Give application full control of IRQ handler, can be useful e.g signaling there is new usb event without constant polling
|
|
|
|
### MCU
|
|
|
|
- Added support for Espressif ESP32-S2 and saola-1 board
|
|
- All default IRQ Handler is renamed to `dcd_int_handler()`
|
|
- STM32 Synopsys
|
|
- Bus events disconnection/suspend/resume are supported
|
|
- Added `dcd_connect()` and `dcd_disconnect()` to enable/disable internal pullup on D+/D- on supported MCUs.
|
|
- Added `dcd_edpt_close()` for STM32 FSDev
|
|
|
|
### Device Stack
|
|
|
|
- tud_cdc_n_write_flush() return number of bytes forced to transfer instead of bool
|
|
- Support multiple configuration descriptors. `TUD_CONFIG_DESCRIPTOR()` template has extra config_num as 1st argument
|
|
- Improve class driver management
|
|
- Driver detection is done by open() API
|
|
- IAD is handled to assign driver id
|
|
- Improve Alternate Interface request with `SET_INTERFACE()` (not fully supported yet).
|
|
- Fixed CDC ZLP response #260
|
|
- Remove ACM-EEM due to lack of support from host
|
|
|
|
### Others
|
|
|
|
- Added OPT_OS_CUMSTOM as hook for application to overwrite and/or add their own OS implementation
|
|
- Enhanced `net_lwip_webserver` example with multiple configuration: RNDIS for Windows, CDC-ECM for macOS (Linux will work with both)
|
|
|
|
## 0.6.0 - 2019.03.30
|
|
|
|
Added **CONTRIBUTORS.md** to give proper credit for contributors to the stack. Special thanks to [Nathan Conrad](https://github.com/pigrew), [Peter Lawrence](https://github.com/majbthrd) and [William D. Jones](https://github.com/cr1901) and others for spending their precious time to add lots of features and ports for this release.
|
|
|
|
### Added
|
|
|
|
**MCU**
|
|
|
|
- Added support for Microchip SAMG55
|
|
- Added support for Nordic nRF52833
|
|
- Added support for Nuvoton: NUC120, NUC121/NUC125, NUC126, NUC505
|
|
- Added support for NXP LPC: 51Uxx, 54xxx, 55xx
|
|
- Added support for NXP iMXRT: RT1011, RT1015, RT1021, RT1052, RT1062, RT1064
|
|
- Added support for Sony CXD56 (Spresense)
|
|
- Added support for STM32: L0, F0, F1, F2, F3, F4, F7, H7
|
|
- Added support for TI MSP430
|
|
- Added support for ValentyUSB's eptri
|
|
|
|
**Class Driver**
|
|
|
|
- Added DFU Runtime class driver
|
|
- Added Network class driver with RNDIS, CDC-ECM, CDC-EEM (work in progress)
|
|
- Added USBTMC class driver
|
|
- Added WebUSB class driver using vendor-specific class
|
|
- Added multiple instances support for CDC and MIDI
|
|
- Added a handful of unit test with Ceedling.
|
|
- Added LOG support for debugging with CFG_TUSB_DEBUG
|
|
- Added `tud_descriptor_bos_cb()` for BOS descriptor (required for USB 2.1)
|
|
- Added `dcd_edpt0_status_complete()` as optional API for DCD
|
|
|
|
**Examples**
|
|
|
|
Following examples are added:
|
|
|
|
- board_test
|
|
- cdc_dual_ports
|
|
- dfu_rt
|
|
- hid_composite
|
|
- net_lwip_webserver
|
|
- usbtmc
|
|
- webusb_serial
|
|
|
|
**Boards**
|
|
|
|
Following boards are added:
|
|
|
|
- adafruit_clue
|
|
- arduino_nano33_ble
|
|
- circuitplayground_bluefruit
|
|
- circuitplayground_express
|
|
- feather_m0_express
|
|
- feather_nrf52840_sense
|
|
- feather_stm32f405
|
|
- fomu
|
|
- itsybitsy_m0
|
|
- itsybitsy_m4
|
|
- lpcxpresso11u37
|
|
- lpcxpresso1549
|
|
- lpcxpresso51u68
|
|
- lpcxpresso54114
|
|
- lpcxpresso55s69
|
|
- mbed1768
|
|
- mimxrt1010_evk
|
|
- mimxrt1015_evk
|
|
- mimxrt1020_evk
|
|
- mimxrt1050_evkb
|
|
- mimxrt1060_evk
|
|
- mimxrt1064_evk
|
|
- msp_exp430f5529lp
|
|
- ngx4330
|
|
- nrf52840_mdk_dongle
|
|
- nutiny_nuc121s
|
|
- nutiny_nuc125s
|
|
- nutiny_nuc126v
|
|
- nutiny_sdk_nuc120
|
|
- nutiny_sdk_nuc505
|
|
- pca10059
|
|
- pca10100
|
|
- pyboardv11
|
|
- raytac_mdbt50q_rx
|
|
- samg55xplained
|
|
- seeeduino_xiao
|
|
- spresense
|
|
- stm32f070rbnucleo
|
|
- stm32f072disco
|
|
- stm32f103bluepill
|
|
- stm32f207nucleo
|
|
- stm32f401blackpill
|
|
- stm32f411blackpill
|
|
- stm32f411disco
|
|
- stm32f412disco
|
|
- stm32f767nucleo
|
|
- stm32h743nucleo
|
|
- stm32l0538disco
|
|
- stm32l476disco
|
|
- teensy_40
|
|
|
|
### Changed
|
|
|
|
- Changed `tud_descriptor_string_cb()` to have additional Language ID argument
|
|
- Merged hal_nrf5x.c into dcd_nrf5x.c
|
|
- Merged dcd_samd21.c and dcd_samd51.c into dcd_samd.c
|
|
- Generalized dcd_stm32f4.c to dcd_synopsys.c
|
|
- Changed cdc_msc_hid to cdc_msc (drop hid) due to limited endpoints number of some MCUs
|
|
- Improved DCD SAMD stability, fix missing setup packet occasionally
|
|
- Improved usbd/usbd_control with proper hanlding of zero-length packet (ZLP)
|
|
- Improved STM32 DCD FSDev
|
|
- Improved STM32 DCD Synopsys
|
|
- Migrated CI from Travis to Github Action
|
|
- Updated nrfx submodule to 2.1.0
|
|
- Fixed mynewt osal queue definition
|
|
- Fixed cdc_msc_freertos example build for all MCUs
|
|
|
|
## 0.5.0 (Initial Release) - 2019.07.10
|
|
|
|
First release, device stack works great, host stack works but still need improvement.
|
|
- Special thanks to @adafruit team, especially @tannewt to help out immensely to rework device stack: simplify osal & control transfer, adding SAMD21/SAMD51 ports, writing porting docs, adding MIDI class support etc...
|
|
- Thanks to @cr1901 for adding STM32F4 port.
|
|
- Thanks to @PTS93 and @todbot for HID raw API
|