tinyusb/hw/mcu/nxp/lpc_chip_11u6x/inc/syscon_11u6x.h

/*
 * @brief LPC11U6X System Control registers and control functions
 *
 * @note
 * Copyright(C) NXP Semiconductors, 2013
 * All rights reserved.
 *
 * @par
 * Software that is described herein is for illustrative purposes only
 * which provides customers with programming information regarding the
 * LPC products.  This software is supplied "AS IS" without any warranties of
 * any kind, and NXP Semiconductors and its licensor disclaim any and
 * all warranties, express or implied, including all implied warranties of
 * merchantability, fitness for a particular purpose and non-infringement of
 * intellectual property rights.  NXP Semiconductors assumes no responsibility
 * or liability for the use of the software, conveys no license or rights under any
 * patent, copyright, mask work right, or any other intellectual property rights in
 * or to any products. NXP Semiconductors reserves the right to make changes
 * in the software without notification. NXP Semiconductors also makes no
 * representation or warranty that such application will be suitable for the
 * specified use without further testing or modification.
 *
 * @par
 * Permission to use, copy, modify, and distribute this software and its
 * documentation is hereby granted, under NXP Semiconductors' and its
 * licensor's relevant copyrights in the software, without fee, provided that it
 * is used in conjunction with NXP Semiconductors microcontrollers.  This
 * copyright, permission, and disclaimer notice must appear in all copies of
 * this code.
 */

#ifndef __SYSCTL_11U6X_H_
#define __SYSCTL_11U6X_H_

#ifdef __cplusplus
extern "C" {
#endif

/** @defgroup SYSCTL_11U6X CHIP: LPC11u6x System Control block driver
 * @ingroup CHIP_11U6X_Drivers
 * @{
 */

/**
 * @brief LPC11U6X System Control block structure
 */
typedef struct {					/*!< SYSCTL Structure */
	__IO uint32_t  SYSMEMREMAP;		/*!< System Memory remap register */
	__IO uint32_t  PRESETCTRL;		/*!< Peripheral reset Control register */
	__IO uint32_t  SYSPLLCTRL;		/*!< System PLL control register */
	__I  uint32_t  SYSPLLSTAT;		/*!< System PLL status register */
	__IO uint32_t  USBPLLCTRL;		/*!< USB PLL control register */
	__I  uint32_t  USBPLLSTAT;		/*!< USB PLL status register */
	__I  uint32_t  RESERVED1[1];
	__IO uint32_t  RTCOSCCTRL;		/*!< RTC Oscillator control register */
	__IO uint32_t  SYSOSCCTRL;		/*!< System Oscillator control register */
	__IO uint32_t  WDTOSCCTRL;		/*!< Watchdog Oscillator control register */
	__I  uint32_t  RESERVED2[2];
	__IO uint32_t  SYSRSTSTAT;		/*!< System Reset Status register */
	__I  uint32_t  RESERVED3[3];
	__IO uint32_t  SYSPLLCLKSEL;	/*!< System PLL clock source select register */
	__IO uint32_t  SYSPLLCLKUEN;	/*!< System PLL clock source update enable register*/
	__IO uint32_t  USBPLLCLKSEL;	/*!< USB PLL clock source select register */
	__IO uint32_t  USBPLLCLKUEN;	/*!< USB PLL clock source update enable register */
	__I  uint32_t  RESERVED4[8];
	__IO uint32_t  MAINCLKSEL;		/*!< Main clock source select register */
	__IO uint32_t  MAINCLKUEN;		/*!< Main clock source update enable register */
	__IO uint32_t  SYSAHBCLKDIV;	/*!< System Clock divider register */
	__I  uint32_t  RESERVED5;
	__IO uint32_t  SYSAHBCLKCTRL;	/*!< System clock control register */
	__I  uint32_t  RESERVED6[4];
	__IO uint32_t  SSP0CLKDIV;		/*!< SSP0 clock divider register */
	__IO uint32_t  USART0CLKDIV;	/*!< UART clock divider register */
	__IO uint32_t  SSP1CLKDIV;		/*!< SSP1 clock divider register */
	__IO uint32_t  FRGCLKDIV;		/*!< FRG clock divider (USARTS 1 - 4) register */
	__I  uint32_t  RESERVED7[7];
	__IO uint32_t  USBCLKSEL;		/*!< USB clock source select register */
	__IO uint32_t  USBCLKUEN;		/*!< USB clock source update enable register */
	__IO uint32_t  USBCLKDIV;		/*!< USB clock source divider register */
	__I  uint32_t  RESERVED8[5];
	__IO uint32_t  CLKOUTSEL;		/*!< Clock out source select register */
	__IO uint32_t  CLKOUTUEN;		/*!< Clock out source update enable register */
	__IO uint32_t  CLKOUTDIV;		/*!< Clock out divider register */
	__I  uint32_t  RESERVED9;
	__IO uint32_t  UARTFRGDIV;		/*!< USART fractional generator divider (USARTS 1 - 4) register */
	__IO uint32_t  UARTFRGMULT;		/*!< USART fractional generator multiplier (USARTS 1 - 4) register */
	__I  uint32_t  RESERVED10;
	__IO uint32_t  EXTTRACECMD;		/*!< External trace buffer command register */
	__I  uint32_t  PIOPORCAP[3];	/*!< POR captured PIO status registers */
	__I  uint32_t  RESERVED11[10];
	__IO uint32_t  IOCONCLKDIV[7];	/*!< IOCON block for programmable glitch filter divider registers */
	__IO uint32_t  BODCTRL;			/*!< Brown Out Detect register */
	__IO uint32_t  SYSTCKCAL;		/*!< System tick counter calibration register */
	__I  uint32_t  RESERVED12[6];
	__IO uint32_t  IRQLATENCY;		/*!< IRQ delay register */
	__IO uint32_t  NMISRC;			/*!< NMI source control register */
	__IO uint32_t  PINTSEL[8];		/*!< GPIO pin interrupt select register 0-7 */
	__IO uint32_t  USBCLKCTRL;		/*!< USB clock control register */
	__I  uint32_t  USBCLKST;		/*!< USB clock status register */
	__I  uint32_t  RESERVED13[25];
	__IO uint32_t  STARTERP0;		/*!< Start logic 0 interrupt wake-up enable register */
	__I  uint32_t  RESERVED14[3];
	__IO uint32_t  STARTERP1;		/*!< Start logic 1 interrupt wake-up enable register */
	__I  uint32_t  RESERVED15[6];
	__IO uint32_t  PDSLEEPCFG;		/*!< Power down states in deep sleep mode register */
	__IO uint32_t  PDWAKECFG;		/*!< Power down states in wake up from deep sleep register */
	__IO uint32_t  PDRUNCFG;		/*!< Power configuration register*/
	__I  uint32_t  RESERVED16[110];
	__I  uint32_t  DEVICEID;		/*!< Device ID register */
} LPC_SYSCTL_T;

/**
 * System memory remap modes used to remap interrupt vectors
 */
typedef enum CHIP_SYSCTL_BOOT_MODE_REMAP {
	REMAP_BOOT_LOADER_MODE,	/*!< Interrupt vectors are re-mapped to Boot ROM */
	REMAP_USER_RAM_MODE,	/*!< Interrupt vectors are re-mapped to Static RAM */
	REMAP_USER_FLASH_MODE	/*!< Interrupt vectors are not re-mapped and reside in Flash */
} CHIP_SYSCTL_BOOT_MODE_REMAP_T;

/**
 * @brief	Re-map interrupt vectors
 * @param	remap	: system memory map value
 * @return	Nothing
 */
STATIC INLINE void Chip_SYSCTL_Map(CHIP_SYSCTL_BOOT_MODE_REMAP_T remap)
{
	LPC_SYSCTL->SYSMEMREMAP = (uint32_t) remap;
}

/**
 * Peripheral reset identifiers, not available on all devices
 */
typedef enum {
	RESET_SSP0,			/*!< SSP0 reset control */
	RESET_I2C0,			/*!< I2C0 reset control */
	RESET_SSP1,			/*!< SSP1 reset control */
	RESET_I2C1,			/*!< I2C1 reset control */
	RESET_FRG,			/*!< FRG reset control */
	RESET_USART1,		/*!< USART1 reset control */
	RESET_USART2,		/*!< USART1 reset control */
	RESET_USART3,		/*!< USART1 reset control */
	RESET_USART4,		/*!< USART1 reset control */
	RESET_SCT0,			/*!< SCT0 reset control */
	RESET_SCT1			/*!< SCT1 reset control */
} CHIP_SYSCTL_PERIPH_RESET_T;

/**
 * @brief	Assert reset for a peripheral
 * @param	periph	: Peripheral to assert reset for
 * @return	Nothing
 * @note	The peripheral will stay in reset until reset is de-asserted. Call
 * Chip_SYSCTL_DeassertPeriphReset() to de-assert the reset.
 */
STATIC INLINE void Chip_SYSCTL_AssertPeriphReset(CHIP_SYSCTL_PERIPH_RESET_T periph)
{
	LPC_SYSCTL->PRESETCTRL &= ~(1 << (uint32_t) periph);
}

/**
 * @brief	De-assert reset for a peripheral
 * @param	periph	: Peripheral to de-assert reset for
 * @return	Nothing
 */
STATIC INLINE void Chip_SYSCTL_DeassertPeriphReset(CHIP_SYSCTL_PERIPH_RESET_T periph)
{
	LPC_SYSCTL->PRESETCTRL |= (1 << (uint32_t) periph);
}

/**
 * @brief	Resets a peripheral
 * @param	periph	:	Peripheral to reset
 * @return	Nothing
 */
STATIC INLINE void Chip_SYSCTL_PeriphReset(CHIP_SYSCTL_PERIPH_RESET_T periph)
{
	Chip_SYSCTL_AssertPeriphReset(periph);
	Chip_SYSCTL_DeassertPeriphReset(periph);
}

/**
 * System reset status
 */
#define SYSCTL_RST_POR    (1 << 0)	/*!< POR reset status */
#define SYSCTL_RST_EXTRST (1 << 1)	/*!< External reset status */
#define SYSCTL_RST_WDT    (1 << 2)	/*!< Watchdog reset status */
#define SYSCTL_RST_BOD    (1 << 3)	/*!< Brown-out detect reset status */
#define SYSCTL_RST_SYSRST (1 << 4)	/*!< software system reset status */

/**
 * @brief	Get system reset status
 * @return	An Or'ed value of SYSCTL_RST_*
 * @note	This function returns the detected reset source(s).
 */
STATIC INLINE uint32_t Chip_SYSCTL_GetSystemRSTStatus(void)
{
	return LPC_SYSCTL->SYSRSTSTAT;
}

/**
 * @brief	Clear system reset status
 * @param	reset	: An Or'ed value of SYSCTL_RST_* status to clear
 * @return	Nothing
 * @note	This function returns the detected reset source(s).
 */
STATIC INLINE void Chip_SYSCTL_ClearSystemRSTStatus(uint32_t reset)
{
	LPC_SYSCTL->SYSRSTSTAT = reset;
}

/**
 * @brief	Read POR captured PIO status
 * @param	index	: POR register index, 0 or 1
 * @return	captured POR PIO status
 */
STATIC INLINE uint32_t Chip_SYSCTL_GetPORPIOStatus(int index)
{
	return LPC_SYSCTL->PIOPORCAP[index];
}

/**
 * Brown-out detector reset level
 */
typedef enum CHIP_SYSCTL_BODRSTLVL {
	// FIXME - will update with correct voltages
	SYSCTL_BODRSTLVL_LEVEL0,	/*!< Brown-out reset at TBD volts */
	SYSCTL_BODRSTLVL_LEVEL1,	/*!< Brown-out reset at TBD volts */
	SYSCTL_BODRSTLVL_LEVEL2,	/*!< Brown-out reset at TBD volts */
	SYSCTL_BODRSTLVL_LEVEL3,	/*!< Brown-out reset at TBD volts */
} CHIP_SYSCTL_BODRSTLVL_T;

/**
 * Brown-out detector interrupt level
 */
typedef enum CHIP_SYSCTL_BODRINTVAL {
	// FIXME - will update with correct voltages
	SYSCTL_BODINTVAL_RESERVED1,
	SYSCTL_BODINTVAL_RESERVED2,
	SYSCTL_BODINTVAL_2_LEVEL2,	/*!< Brown-out interrupt at TBD volts */
	SYSCTL_BODINTVAL_2_LEVEL3,	/*!< Brown-out interrupt at TBD volts */
} CHIP_SYSCTL_BODRINTVAL_T;

/**
 * @brief	Set brown-out detection interrupt and reset levels
 * @param	rstlvl	: Brown-out detector reset level
 * @param	intlvl	: Brown-out interrupt level
 * @return	Nothing
 * @note	Brown-out detection reset will be disabled upon exiting this function.
 * Use Chip_SYSCTL_EnableBODReset() to re-enable.
 */
STATIC INLINE void Chip_SYSCTL_SetBODLevels(CHIP_SYSCTL_BODRSTLVL_T rstlvl,
											CHIP_SYSCTL_BODRINTVAL_T intlvl)
{
	LPC_SYSCTL->BODCTRL = ((uint32_t) rstlvl) | (((uint32_t) intlvl) << 2);
}

/**
 * @brief	Enable brown-out detection reset
 * @return	Nothing
 */
STATIC INLINE void Chip_SYSCTL_EnableBODReset(void)
{
	LPC_SYSCTL->BODCTRL |= (1 << 4);
}

/**
 * @brief	Disable brown-out detection reset
 * @return	Nothing
 */
STATIC INLINE void Chip_SYSCTL_DisableBODReset(void)
{
	LPC_SYSCTL->BODCTRL &= ~(1 << 4);
}

/**
 * @brief	Set System tick timer calibration value
 * @param	sysCalVal	: System tick timer calibration value
 * @return	Nothing
 */
STATIC INLINE void Chip_SYSCTL_SetSYSTCKCAL(uint32_t sysCalVal)
{
	LPC_SYSCTL->SYSTCKCAL = sysCalVal;
}

/**
 * @brief	Set System IRQ latency
 * @param	latency	: Latency in clock ticks
 * @return	Nothing
 * @note	Sets the IRQ latency, a value between 0 and 255 clocks. Lower
 * values allow better latency.
 */
STATIC INLINE void Chip_SYSCTL_SetIRQLatency(uint32_t latency)
{
	LPC_SYSCTL->IRQLATENCY = latency;
}

/**
 * @brief	Get System IRQ latency
 * @return	Latency in clock ticks
 */
STATIC INLINE uint32_t Chip_SYSCTL_GetIRQLatency(void)
{
	return LPC_SYSCTL->IRQLATENCY;
}

/**
 * Non-Maskable Interrupt Enable/Disable value
 */
#define SYSCTL_NMISRC_ENABLE   ((uint32_t) 1 << 31)	/*!< Enable the Non-Maskable Interrupt (NMI) source */

/**
 * @brief	Set source for non-maskable interrupt (NMI)
 * @param	intsrc	: IRQ number to assign to the NMI
 * @return	Nothing
 * @note	The NMI source will be disabled upon exiting this function. use the
 * Chip_SYSCTL_EnableNMISource() function to enable the NMI source.
 */
STATIC INLINE void Chip_SYSCTL_SetNMISource(uint32_t intsrc)
{
	LPC_SYSCTL->NMISRC = 0;	/* Disable first */
	LPC_SYSCTL->NMISRC = intsrc;
}

/**
 * @brief	Enable interrupt used for NMI source
 * @return	Nothing
 */
STATIC INLINE void Chip_SYSCTL_EnableNMISource(void)
{
	LPC_SYSCTL->NMISRC |= SYSCTL_NMISRC_ENABLE;
}

/**
 * @brief	Disable interrupt used for NMI source
 * @return	Nothing
 */
STATIC INLINE void Chip_SYSCTL_DisableNMISource(void)
{
	LPC_SYSCTL->NMISRC &= ~(SYSCTL_NMISRC_ENABLE);
}

/**
 * @brief	Setup a GPIO pin source for a pin interrupt (0-7)
 * @param	intno	: IRQ number
 * @param	port	: port number 0, 1, or 2)
 * @param	pin		: pin number (0-23 for Port 0, 0-31 for Port 1, 0-7 for port 2)
 * @return	Nothing
 */
void Chip_SYSCTL_SetPinInterrupt(uint32_t intno, uint8_t port, uint8_t pin);

/**
 * @brief	Setup USB clock control
 * @param	ap_clk	: USB need_clock signal control (0 or 1)
 * @param	pol_clk	: USB need_clock polarity for triggering the USB wake-up interrupt (0 or 1)
 * @return	Nothing
 * @note	See the USBCLKCTRL register in the user manual for these settings.
 */
STATIC INLINE void Chip_SYSCTL_SetUSBCLKCTRL(uint32_t ap_clk, uint32_t pol_clk)
{
	LPC_SYSCTL->USBCLKCTRL = ap_clk | (pol_clk << 1);
}

/**
 * @brief	Use the internal pull-up resistor for the the USB_DP/DM pull-up/pull-down resistors
 * @return	Nothing
 * @note	See the USBCLKCTRL register in the user manual for more information.
 */
STATIC INLINE void Chip_SYSCTL_UseIntPullup(void)
{
	LPC_SYSCTL->USBCLKCTRL |= (1 << 2);
}

/**
 * @brief	Use the external pull-up resistor for the the USB_DP/DM pull-up/pull-down resistors
 * @return	Nothing
 * @note	See the USBCLKCTRL register in the user manual for more information.
 */
STATIC INLINE void Chip_SYSCTL_UseExtPullup(void)
{
	LPC_SYSCTL->USBCLKCTRL &= ~(1 << 2);
}

/**
 * @brief	Returns the status of the USB need_clock signal
 * @return	true if USB need_clock status is high, otherwise false
 */
STATIC INLINE bool Chip_SYSCTL_GetUSBCLKStatus(void)
{
	return (bool) ((LPC_SYSCTL->USBCLKST & 0x1) != 0);
}

/**
 * @brief	Enable PIO start logic for a PININT pin
 * @param	pin	: PIO pin number
 * @return	Nothing
 * @note	Different devices support different pins, see the user manual for supported pins.
 */
STATIC INLINE void Chip_SYSCTL_EnableStartPin(uint32_t pin)
{
	LPC_SYSCTL->STARTERP0 |= (1 << pin);
}

/**
 * @brief	Disable PIO start logic for a PININT pin
 * @param	pin	: PIO pin number
 * @return	Nothing
 * @note	Different devices support different pins, see the user manual for supported pins.
 */
STATIC INLINE void Chip_SYSCTL_DisableStartPin(uint32_t pin)
{
	LPC_SYSCTL->STARTERP0 &= ~(1 << pin);
}

/**
 * Peripheral interrupt wakeup events
 */
#define SYSCTL_WAKEUP_BOD_WDT_INT (1 << 13)	/*!< Shared Brown Out Detect (BOD) and WDT interrupt wake-up */
#define SYSCTL_WAKEUP_RTCINT     (1 << 12)	/*!< RTC interrupt wake-up */
#define SYSCTL_WAKEUP_USB_WAKEUP (1 << 19)	/*!< USB need_clock signal wake-up */
#define SYSCTL_WAKEUP_GPIOINT0   (1 << 20)	/*!< GPIO GROUP0 interrupt wake-up */
#define SYSCTL_WAKEUP_GPIOINT1   (1 << 21)	/*!< GPIO GROUP1 interrupt wake-up */
#define SYSCTL_WAKEUP_USART1_4   (1 << 23)	/*!< Combined USART1 and USART4 wake-up */
#define SYSCTL_WAKEUP_USART2_3   (1 << 24)	/*!< Combined USART2 and USART3 interrupt wake-up */

/**
 * @brief	Enables a peripheral's wakeup logic
 * @param	periphmask	: OR'ed values of SYSCTL_WAKEUP_* for wakeup
 * @return	Nothing
 */
STATIC INLINE void Chip_SYSCTL_EnablePeriphWakeup(uint32_t periphmask)
{
	LPC_SYSCTL->STARTERP1 |= periphmask;
}

/**
 * @brief	Disables a peripheral's wakeup logic
 * @param	periphmask	: OR'ed values of SYSCTL_WAKEUP_* for wakeup
 * @return	Nothing
 */
STATIC INLINE void Chip_SYSCTL_DisablePeriphWakeup(uint32_t periphmask)
{
	LPC_SYSCTL->STARTERP1 &= ~periphmask;
}

/**
 * Deep sleep setup values
 */
#define SYSCTL_DEEPSLP_BOD_PD    (1 << 3)	/*!< BOD power-down control in Deep-sleep mode, powered down */
#define SYSCTL_DEEPSLP_WDTOSC_PD (1 << 6)	/*!< Watchdog oscillator power control in Deep-sleep, powered down */

/**
 * @brief	Setup deep sleep behaviour for power down
 * @param	sleepmask	: OR'ed values of SYSCTL_DEEPSLP_* values (high to powerdown on deepsleep)
 * @return	Nothing
 * @note	This must be setup prior to using deep sleep. See the user manual
 * (PDSLEEPCFG register) for more info on setting this up. This function selects
 * which peripherals are powered down on deep sleep.
 * This function should only be called once with all options for power-down
 * in that call.
 */
void Chip_SYSCTL_SetDeepSleepPD(uint32_t sleepmask);

/**
 * @brief	Returns current deep sleep mask
 * @return	OR'ed values of SYSCTL_DEEPSLP_* values
 * @note	A high bit indicates the peripheral will power down on deep sleep.
 */
STATIC INLINE uint32_t Chip_SYSCTL_GetDeepSleepPD(void)
{
	return LPC_SYSCTL->PDSLEEPCFG;
}

/**
 * Deep sleep to wakeup setup values
 */
#define SYSCTL_SLPWAKE_IRCOUT_PD    (1 << 0)	/*!< IRC oscillator output wake-up configuration */
#define SYSCTL_SLPWAKE_IRC_PD       (1 << 1)	/*!< IRC oscillator power-down wake-up configuration */
#define SYSCTL_SLPWAKE_FLASH_PD     (1 << 2)	/*!< Flash wake-up configuration */
#define SYSCTL_SLPWAKE_BOD_PD       (1 << 3)	/*!< BOD wake-up configuration */
#define SYSCTL_SLPWAKE_ADC_PD       (1 << 4)	/*!< ADC wake-up configuration */
#define SYSCTL_SLPWAKE_SYSOSC_PD    (1 << 5)	/*!< System oscillator wake-up configuration */
#define SYSCTL_SLPWAKE_WDTOSC_PD    (1 << 6)	/*!< Watchdog oscillator wake-up configuration */
#define SYSCTL_SLPWAKE_SYSPLL_PD    (1 << 7)	/*!< System PLL wake-up configuration */
#define SYSCTL_SLPWAKE_USBPLL_PD    (1 << 8)	/*!< USB PLL wake-up configuration */
#define SYSCTL_SLPWAKE_USBPAD_PD    (1 << 10)	/*!< USB transceiver wake-up configuration */
#define SYSCTL_SLPWAKE_TS_PD        (1 << 13)	/*!< Temperature sensor wake-up configuration */

/**
 * @brief	Setup wakeup behaviour from deep sleep
 * @param	wakeupmask	: OR'ed values of SYSCTL_SLPWAKE_* values (high is powered down)
 * @return	Nothing
 * @note	This must be setup prior to using deep sleep. See the user manual
 * (PDWAKECFG register) for more info on setting this up. This function selects
 * which peripherals are powered up on exit from deep sleep.
 * This function should only be called once with all options for wakeup
 * in that call.
 */
void Chip_SYSCTL_SetWakeup(uint32_t wakeupmask);

/**
 * @brief	Return current wakeup mask
 * @return	OR'ed values of SYSCTL_SLPWAKE_* values
 * @note	A high state indicates the peripehral will powerup on wakeup.
 */
STATIC INLINE uint32_t Chip_SYSCTL_GetWakeup(void)
{
	return LPC_SYSCTL->PDWAKECFG;
}

/**
 * Power down configuration values
 */
#define SYSCTL_POWERDOWN_IRCOUT_PD (1 << 0)		/*!< IRC oscillator output power down */
#define SYSCTL_POWERDOWN_IRC_PD    (1 << 1)		/*!< IRC oscillator power-down */
#define SYSCTL_POWERDOWN_FLASH_PD  (1 << 2)		/*!< Flash power down */
#define SYSCTL_POWERDOWN_BOD_PD    (1 << 3)		/*!< BOD power down */
#define SYSCTL_POWERDOWN_ADC_PD    (1 << 4)		/*!< ADC power down */
#define SYSCTL_POWERDOWN_SYSOSC_PD (1 << 5)		/*!< System oscillator power down */
#define SYSCTL_POWERDOWN_WDTOSC_PD (1 << 6)		/*!< Watchdog oscillator power down */
#define SYSCTL_POWERDOWN_SYSPLL_PD (1 << 7)		/*!< System PLL power down */
#define SYSCTL_POWERDOWN_USBPLL_PD (1 << 8)		/*!< USB PLL power-down */
#define SYSCTL_POWERDOWN_USBPAD_PD (1 << 10)	/*!< USB transceiver power-down */
#define SYSCTL_POWERDOWN_TS_PD     (1 << 13)	/*!< Temperature Sensor power-down */

/**
 * @brief	Power down one or more blocks or peripherals
 * @param	powerdownmask	: OR'ed values of SYSCTL_POWERDOWN_* values
 * @return	Nothing
 */
void Chip_SYSCTL_PowerDown(uint32_t powerdownmask);

/**
 * @brief	Power up one or more blocks or peripherals
 * @param	powerupmask	: OR'ed values of SYSCTL_POWERDOWN_* values
 * @return	Nothing
 */
void Chip_SYSCTL_PowerUp(uint32_t powerupmask);

/**
 * @brief	Get power status
 * @return	OR'ed values of SYSCTL_POWERDOWN_* values
 * @note	A high state indicates the peripheral is powered down.
 */
STATIC INLINE uint32_t Chip_SYSCTL_GetPowerStates(void)
{
	return LPC_SYSCTL->PDRUNCFG;
}

/**
 * @brief	Return the device ID
 * @return	the device ID
 */
STATIC INLINE uint32_t Chip_SYSCTL_GetDeviceID(void)
{
	return LPC_SYSCTL->DEVICEID;
}

/**
 * @}
 */

#ifdef __cplusplus
}
#endif

#endif /*!< __SYSCTL_11U6X_H_ */