2018-12-01 01:34:19 +07:00

96 lines
3.2 KiB
C

/*
* @brief LPC11U6x USB device register block
*
* @note
* Copyright(C) NXP Semiconductors, 2013
* All rights reserved.
*
* @par
* Software that is described herein is for illustrative purposes only
* which provides customers with programming information regarding the
* LPC products. This software is supplied "AS IS" without any warranties of
* any kind, and NXP Semiconductors and its licensor disclaim any and
* all warranties, express or implied, including all implied warranties of
* merchantability, fitness for a particular purpose and non-infringement of
* intellectual property rights. NXP Semiconductors assumes no responsibility
* or liability for the use of the software, conveys no license or rights under any
* patent, copyright, mask work right, or any other intellectual property rights in
* or to any products. NXP Semiconductors reserves the right to make changes
* in the software without notification. NXP Semiconductors also makes no
* representation or warranty that such application will be suitable for the
* specified use without further testing or modification.
*
* @par
* Permission to use, copy, modify, and distribute this software and its
* documentation is hereby granted, under NXP Semiconductors' and its
* licensor's relevant copyrights in the software, without fee, provided that it
* is used in conjunction with NXP Semiconductors microcontrollers. This
* copyright, permission, and disclaimer notice must appear in all copies of
* this code.
*/
#ifndef __USBD_11U6X_H_
#define __USBD_11U6X_H_
#ifdef __cplusplus
extern "C" {
#endif
/** @defgroup USBD_11U6X CHIP: LPC11u6x USB Device driver
* @ingroup CHIP_11U6X_Drivers
* @{
*/
#define USB_SETUP_RCVD (0x1 << 8) /* SETUP token received */
#define BUF_ACTIVE (0x1U << 31)
/**
* @brief USB device register block structure
*/
typedef struct { /*!< USB Structure */
__IO uint32_t DEVCMDSTAT; /*!< USB Device Command/Status register */
__IO uint32_t INFO; /*!< USB Info register */
__IO uint32_t EPLISTSTART; /*!< USB EP Command/Status List start address */
__IO uint32_t DATABUFSTART; /*!< USB Data buffer start address */
__IO uint32_t LPM; /*!< Link Power Management register */
__IO uint32_t EPSKIP; /*!< USB Endpoint skip */
__IO uint32_t EPINUSE; /*!< USB Endpoint Buffer in use */
__IO uint32_t EPBUFCFG; /*!< USB Endpoint Buffer Configuration register */
__IO uint32_t INTSTAT; /*!< USB interrupt status register */
__IO uint32_t INTEN; /*!< USB interrupt enable register */
__IO uint32_t INTSETSTAT; /*!< USB set interrupt status register */
__IO uint32_t INTROUTING; /*!< USB interrupt routing register */
__I uint32_t RESERVED0[1];
__I uint32_t EPTOGGLE; /*!< USB Endpoint toggle register */
} LPC_USB_T;
/**
* @}
*/
/**
* @brief Read Device Command Status
* @param pUSB : USB peripheral selected
* @return Device command status register value
*/
STATIC INLINE uint32_t Chip_USB_GetDevCmdStatus(LPC_USB_T *pUSB)
{
return pUSB->DEVCMDSTAT;
}
/**
* @brief Read Start of Endpoint List
* @param pUSB : USB peripheral selected
* @return Endpoint list start address register value
*/
STATIC INLINE uint32_t Chip_USB_GetEPListStart(LPC_USB_T *pUSB)
{
return pUSB->EPLISTSTART;
}
#ifdef __cplusplus
}
#endif
#endif /* __USBD_11U6X_H_ */