mirror of
https://github.com/hathach/tinyusb.git
synced 2025-01-17 05:32:55 +08:00
2768 lines
58 KiB
C
2768 lines
58 KiB
C
/**
|
|
* Copyright (c) 2017 - 2017, Nordic Semiconductor ASA
|
|
*
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without modification,
|
|
* are permitted provided that the following conditions are met:
|
|
*
|
|
* 1. Redistributions of source code must retain the above copyright notice, this
|
|
* list of conditions and the following disclaimer.
|
|
*
|
|
* 2. Redistributions in binary form, except as embedded into a Nordic
|
|
* Semiconductor ASA integrated circuit in a product or a software update for
|
|
* such product, must reproduce the above copyright notice, this list of
|
|
* conditions and the following disclaimer in the documentation and/or other
|
|
* materials provided with the distribution.
|
|
*
|
|
* 3. Neither the name of Nordic Semiconductor ASA nor the names of its
|
|
* contributors may be used to endorse or promote products derived from this
|
|
* software without specific prior written permission.
|
|
*
|
|
* 4. This software, with or without modification, must only be used with a
|
|
* Nordic Semiconductor ASA integrated circuit.
|
|
*
|
|
* 5. Any software provided in binary form under this license must not be reverse
|
|
* engineered, decompiled, modified and/or disassembled.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
|
|
* OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
|
* DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
|
|
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
|
|
* GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
|
|
* OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
*/
|
|
|
|
|
|
|
|
#ifndef SDK_CONFIG_H
|
|
#define SDK_CONFIG_H
|
|
// <<< Use Configuration Wizard in Context Menu >>>\n
|
|
#ifdef USE_APP_CONFIG
|
|
#include "app_config.h"
|
|
#endif
|
|
// <h> nRF_Drivers
|
|
|
|
//==========================================================
|
|
// <e> APP_USBD_ENABLED - app_usbd - USB Device library
|
|
//==========================================================
|
|
#ifndef APP_USBD_ENABLED
|
|
#define APP_USBD_ENABLED 0
|
|
#endif
|
|
|
|
// <e> CLOCK_ENABLED - nrf_drv_clock - CLOCK peripheral driver
|
|
//==========================================================
|
|
#ifndef CLOCK_ENABLED
|
|
#define CLOCK_ENABLED 1
|
|
#endif
|
|
// <o> CLOCK_CONFIG_XTAL_FREQ - HF XTAL Frequency
|
|
|
|
// <0=> Default (64 MHz)
|
|
|
|
#ifndef CLOCK_CONFIG_XTAL_FREQ
|
|
#define CLOCK_CONFIG_XTAL_FREQ 0
|
|
#endif
|
|
|
|
// <o> CLOCK_CONFIG_LF_SRC - LF Clock Source
|
|
|
|
// <0=> RC
|
|
// <1=> XTAL
|
|
// <2=> Synth
|
|
|
|
#ifndef CLOCK_CONFIG_LF_SRC
|
|
#define CLOCK_CONFIG_LF_SRC 1
|
|
#endif
|
|
|
|
// <o> CLOCK_CONFIG_IRQ_PRIORITY - Interrupt priority
|
|
|
|
|
|
// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
|
|
// <0=> 0 (highest)
|
|
// <1=> 1
|
|
// <2=> 2
|
|
// <3=> 3
|
|
// <4=> 4
|
|
// <5=> 5
|
|
// <6=> 6
|
|
// <7=> 7
|
|
|
|
#ifndef CLOCK_CONFIG_IRQ_PRIORITY
|
|
#define CLOCK_CONFIG_IRQ_PRIORITY 7
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> GPIOTE_ENABLED - nrf_drv_gpiote - GPIOTE peripheral driver
|
|
//==========================================================
|
|
#ifndef GPIOTE_ENABLED
|
|
#define GPIOTE_ENABLED 1
|
|
#endif
|
|
// <o> GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins
|
|
#ifndef GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
|
|
#define GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 4
|
|
#endif
|
|
|
|
// <o> GPIOTE_CONFIG_IRQ_PRIORITY - Interrupt priority
|
|
|
|
|
|
// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
|
|
// <0=> 0 (highest)
|
|
// <1=> 1
|
|
// <2=> 2
|
|
// <3=> 3
|
|
// <4=> 4
|
|
// <5=> 5
|
|
// <6=> 6
|
|
// <7=> 7
|
|
|
|
#ifndef GPIOTE_CONFIG_IRQ_PRIORITY
|
|
#define GPIOTE_CONFIG_IRQ_PRIORITY 7
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <q> PERIPHERAL_RESOURCE_SHARING_ENABLED - nrf_drv_common - Peripheral drivers common module
|
|
|
|
|
|
#ifndef PERIPHERAL_RESOURCE_SHARING_ENABLED
|
|
#define PERIPHERAL_RESOURCE_SHARING_ENABLED 0
|
|
#endif
|
|
|
|
// <e> POWER_ENABLED - nrf_drv_power - POWER peripheral driver
|
|
//==========================================================
|
|
#ifndef POWER_ENABLED
|
|
#define POWER_ENABLED 1
|
|
#endif
|
|
// <o> POWER_CONFIG_IRQ_PRIORITY - Interrupt priority
|
|
|
|
|
|
// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
|
|
// <0=> 0 (highest)
|
|
// <1=> 1
|
|
// <2=> 2
|
|
// <3=> 3
|
|
// <4=> 4
|
|
// <5=> 5
|
|
// <6=> 6
|
|
// <7=> 7
|
|
|
|
#ifndef POWER_CONFIG_IRQ_PRIORITY
|
|
#define POWER_CONFIG_IRQ_PRIORITY 7
|
|
#endif
|
|
|
|
// <q> POWER_CONFIG_DEFAULT_DCDCEN - The default configuration of main DCDC regulator
|
|
|
|
|
|
// <i> This settings means only that components for DCDC regulator are installed and it can be enabled.
|
|
|
|
#ifndef POWER_CONFIG_DEFAULT_DCDCEN
|
|
#define POWER_CONFIG_DEFAULT_DCDCEN 0
|
|
#endif
|
|
|
|
// <q> POWER_CONFIG_DEFAULT_DCDCENHV - The default configuration of High Voltage DCDC regulator
|
|
|
|
|
|
// <i> This settings means only that components for DCDC regulator are installed and it can be enabled.
|
|
|
|
#ifndef POWER_CONFIG_DEFAULT_DCDCENHV
|
|
#define POWER_CONFIG_DEFAULT_DCDCENHV 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <q> SYSTICK_ENABLED - nrf_drv_systick - SysTick driver
|
|
|
|
|
|
#ifndef SYSTICK_ENABLED
|
|
#define SYSTICK_ENABLED 1
|
|
#endif
|
|
|
|
// <e> UART_ENABLED - nrf_drv_uart - UART/UARTE peripheral driver
|
|
//==========================================================
|
|
#ifndef UART_ENABLED
|
|
#define UART_ENABLED 1
|
|
#endif
|
|
// <o> UART_DEFAULT_CONFIG_HWFC - Hardware Flow Control
|
|
|
|
// <0=> Disabled
|
|
// <1=> Enabled
|
|
|
|
#ifndef UART_DEFAULT_CONFIG_HWFC
|
|
#define UART_DEFAULT_CONFIG_HWFC 0
|
|
#endif
|
|
|
|
// <o> UART_DEFAULT_CONFIG_PARITY - Parity
|
|
|
|
// <0=> Excluded
|
|
// <14=> Included
|
|
|
|
#ifndef UART_DEFAULT_CONFIG_PARITY
|
|
#define UART_DEFAULT_CONFIG_PARITY 0
|
|
#endif
|
|
|
|
// <o> UART_DEFAULT_CONFIG_BAUDRATE - Default Baudrate
|
|
|
|
// <323584=> 1200 baud
|
|
// <643072=> 2400 baud
|
|
// <1290240=> 4800 baud
|
|
// <2576384=> 9600 baud
|
|
// <3862528=> 14400 baud
|
|
// <5152768=> 19200 baud
|
|
// <7716864=> 28800 baud
|
|
// <10289152=> 38400 baud
|
|
// <15400960=> 57600 baud
|
|
// <20615168=> 76800 baud
|
|
// <30801920=> 115200 baud
|
|
// <61865984=> 230400 baud
|
|
// <67108864=> 250000 baud
|
|
// <121634816=> 460800 baud
|
|
// <251658240=> 921600 baud
|
|
// <268435456=> 1000000 baud
|
|
|
|
#ifndef UART_DEFAULT_CONFIG_BAUDRATE
|
|
#define UART_DEFAULT_CONFIG_BAUDRATE 30801920
|
|
#endif
|
|
|
|
// <o> UART_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority
|
|
|
|
|
|
// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
|
|
// <0=> 0 (highest)
|
|
// <1=> 1
|
|
// <2=> 2
|
|
// <3=> 3
|
|
// <4=> 4
|
|
// <5=> 5
|
|
// <6=> 6
|
|
// <7=> 7
|
|
|
|
#ifndef UART_DEFAULT_CONFIG_IRQ_PRIORITY
|
|
#define UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
|
|
#endif
|
|
|
|
// <q> UART_EASY_DMA_SUPPORT - Driver supporting EasyDMA
|
|
|
|
|
|
#ifndef UART_EASY_DMA_SUPPORT
|
|
#define UART_EASY_DMA_SUPPORT 1
|
|
#endif
|
|
|
|
// <q> UART_LEGACY_SUPPORT - Driver supporting Legacy mode
|
|
|
|
|
|
#ifndef UART_LEGACY_SUPPORT
|
|
#define UART_LEGACY_SUPPORT 1
|
|
#endif
|
|
|
|
// <e> UART0_ENABLED - Enable UART0 instance
|
|
//==========================================================
|
|
#ifndef UART0_ENABLED
|
|
#define UART0_ENABLED 1
|
|
#endif
|
|
// <q> UART0_CONFIG_USE_EASY_DMA - Default setting for using EasyDMA
|
|
|
|
|
|
#ifndef UART0_CONFIG_USE_EASY_DMA
|
|
#define UART0_CONFIG_USE_EASY_DMA 1
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> UART1_ENABLED - Enable UART1 instance
|
|
//==========================================================
|
|
#ifndef UART1_ENABLED
|
|
#define UART1_ENABLED 0
|
|
#endif
|
|
// <q> UART1_CONFIG_USE_EASY_DMA - Default setting for using EasyDMA
|
|
|
|
|
|
#ifndef UART1_CONFIG_USE_EASY_DMA
|
|
#define UART1_CONFIG_USE_EASY_DMA 1
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// </e>
|
|
|
|
// <e> USBD_ENABLED - nrf_drv_usbd - USB driver
|
|
//==========================================================
|
|
#ifndef USBD_ENABLED
|
|
#define USBD_ENABLED 0
|
|
#endif
|
|
// <o> USBD_CONFIG_IRQ_PRIORITY - Interrupt priority
|
|
|
|
|
|
// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
|
|
// <0=> 0 (highest)
|
|
// <1=> 1
|
|
// <2=> 2
|
|
// <3=> 3
|
|
// <4=> 4
|
|
// <5=> 5
|
|
// <6=> 6
|
|
// <7=> 7
|
|
|
|
#ifndef USBD_CONFIG_IRQ_PRIORITY
|
|
#define USBD_CONFIG_IRQ_PRIORITY 7
|
|
#endif
|
|
|
|
// <o> NRF_DRV_USBD_DMASCHEDULER_MODE - USBD SMA scheduler working scheme
|
|
|
|
// <0=> Prioritized access
|
|
// <1=> Round Robin
|
|
|
|
#ifndef NRF_DRV_USBD_DMASCHEDULER_MODE
|
|
#define NRF_DRV_USBD_DMASCHEDULER_MODE 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// </h>
|
|
//==========================================================
|
|
|
|
// <h> nRF_Libraries
|
|
|
|
//==========================================================
|
|
// <q> APP_FIFO_ENABLED - app_fifo - Software FIFO implementation
|
|
|
|
|
|
#ifndef APP_FIFO_ENABLED
|
|
#define APP_FIFO_ENABLED 1
|
|
#endif
|
|
|
|
// <e> APP_SCHEDULER_ENABLED - app_scheduler - Events scheduler
|
|
//==========================================================
|
|
#ifndef APP_SCHEDULER_ENABLED
|
|
#define APP_SCHEDULER_ENABLED 1
|
|
#endif
|
|
// <q> APP_SCHEDULER_WITH_PAUSE - Enabling pause feature
|
|
|
|
|
|
#ifndef APP_SCHEDULER_WITH_PAUSE
|
|
#define APP_SCHEDULER_WITH_PAUSE 0
|
|
#endif
|
|
|
|
// <q> APP_SCHEDULER_WITH_PROFILER - Enabling scheduler profiling
|
|
|
|
|
|
#ifndef APP_SCHEDULER_WITH_PROFILER
|
|
#define APP_SCHEDULER_WITH_PROFILER 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> APP_TIMER_ENABLED - app_timer - Application timer functionality
|
|
//==========================================================
|
|
#ifndef APP_TIMER_ENABLED
|
|
#define APP_TIMER_ENABLED 1
|
|
#endif
|
|
// <o> APP_TIMER_CONFIG_RTC_FREQUENCY - Configure RTC prescaler.
|
|
|
|
// <0=> 32768 Hz
|
|
// <1=> 16384 Hz
|
|
// <3=> 8192 Hz
|
|
// <7=> 4096 Hz
|
|
// <15=> 2048 Hz
|
|
// <31=> 1024 Hz
|
|
|
|
#ifndef APP_TIMER_CONFIG_RTC_FREQUENCY
|
|
#define APP_TIMER_CONFIG_RTC_FREQUENCY 0
|
|
#endif
|
|
|
|
// <o> APP_TIMER_CONFIG_IRQ_PRIORITY - Interrupt priority
|
|
|
|
|
|
// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
|
|
// <0=> 0 (highest)
|
|
// <1=> 1
|
|
// <2=> 2
|
|
// <3=> 3
|
|
// <4=> 4
|
|
// <5=> 5
|
|
// <6=> 6
|
|
// <7=> 7
|
|
|
|
#ifndef APP_TIMER_CONFIG_IRQ_PRIORITY
|
|
#define APP_TIMER_CONFIG_IRQ_PRIORITY 7
|
|
#endif
|
|
|
|
// <o> APP_TIMER_CONFIG_OP_QUEUE_SIZE - Capacity of timer requests queue.
|
|
// <i> Size of the queue depends on how many timers are used
|
|
// <i> in the system, how often timers are started and overall
|
|
// <i> system latency. If queue size is too small app_timer calls
|
|
// <i> will fail.
|
|
|
|
#ifndef APP_TIMER_CONFIG_OP_QUEUE_SIZE
|
|
#define APP_TIMER_CONFIG_OP_QUEUE_SIZE 10
|
|
#endif
|
|
|
|
// <q> APP_TIMER_CONFIG_USE_SCHEDULER - Enable scheduling app_timer events to app_scheduler
|
|
|
|
|
|
#ifndef APP_TIMER_CONFIG_USE_SCHEDULER
|
|
#define APP_TIMER_CONFIG_USE_SCHEDULER 0
|
|
#endif
|
|
|
|
// <q> APP_TIMER_WITH_PROFILER - Enable app_timer profiling
|
|
|
|
|
|
#ifndef APP_TIMER_WITH_PROFILER
|
|
#define APP_TIMER_WITH_PROFILER 0
|
|
#endif
|
|
|
|
// <q> APP_TIMER_KEEPS_RTC_ACTIVE - Enable RTC always on
|
|
|
|
|
|
// <i> If option is enabled RTC is kept running even if there is no active timers.
|
|
// <i> This option can be used when app_timer is used for timestamping.
|
|
|
|
#ifndef APP_TIMER_KEEPS_RTC_ACTIVE
|
|
#define APP_TIMER_KEEPS_RTC_ACTIVE 0
|
|
#endif
|
|
|
|
// <o> APP_TIMER_CONFIG_SWI_NUMBER - Configure SWI instance used.
|
|
|
|
// <0=> 0
|
|
// <1=> 1
|
|
|
|
#ifndef APP_TIMER_CONFIG_SWI_NUMBER
|
|
#define APP_TIMER_CONFIG_SWI_NUMBER 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> APP_UART_ENABLED - app_uart - UART driver
|
|
//==========================================================
|
|
#ifndef APP_UART_ENABLED
|
|
#define APP_UART_ENABLED 1
|
|
#endif
|
|
// <o> APP_UART_DRIVER_INSTANCE - UART instance used
|
|
|
|
// <0=> 0
|
|
|
|
#ifndef APP_UART_DRIVER_INSTANCE
|
|
#define APP_UART_DRIVER_INSTANCE 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <q> APP_USBD_CLASS_CDC_ACM_ENABLED - app_usbd_cdc_acm - USB CDC ACM class
|
|
|
|
|
|
#ifndef APP_USBD_CLASS_CDC_ACM_ENABLED
|
|
#define APP_USBD_CLASS_CDC_ACM_ENABLED 0
|
|
#endif
|
|
|
|
// <q> BUTTON_ENABLED - app_button - buttons handling module
|
|
|
|
|
|
#ifndef BUTTON_ENABLED
|
|
#define BUTTON_ENABLED 1
|
|
#endif
|
|
|
|
// <e> HARDFAULT_HANDLER_ENABLED - hardfault_default - HardFault default handler for debugging and release
|
|
//==========================================================
|
|
#ifndef HARDFAULT_HANDLER_ENABLED
|
|
#define HARDFAULT_HANDLER_ENABLED 1
|
|
#endif
|
|
// <q> HARDFAULT_HANDLER_GDB_PSP_BACKTRACE - Bypass the GDB problem with multiple stack pointers backtrace
|
|
|
|
|
|
// <i> There is a known bug in GDB which causes it to incorrectly backtrace the code
|
|
// <i> when multiple stack pointers are used (main and process stack pointers).
|
|
// <i> This option enables the fix for that problem and allows to see the proper backtrace info.
|
|
// <i> It makes it possible to trace the code to the exact point where a HardFault appeared.
|
|
// <i> This option requires additional commands and may temporarily switch MSP stack to store data on PSP space.
|
|
// <i> This is an optional parameter - enable it while debugging.
|
|
// <i> Before a HardFault handler exits, the stack will be reverted to its previous value.
|
|
|
|
#ifndef HARDFAULT_HANDLER_GDB_PSP_BACKTRACE
|
|
#define HARDFAULT_HANDLER_GDB_PSP_BACKTRACE 1
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> NRF_BALLOC_ENABLED - nrf_balloc - Block allocator module
|
|
//==========================================================
|
|
#ifndef NRF_BALLOC_ENABLED
|
|
#define NRF_BALLOC_ENABLED 0
|
|
#endif
|
|
// <e> NRF_BALLOC_CONFIG_DEBUG_ENABLED - Enables debug mode in the module.
|
|
//==========================================================
|
|
#ifndef NRF_BALLOC_CONFIG_DEBUG_ENABLED
|
|
#define NRF_BALLOC_CONFIG_DEBUG_ENABLED 0
|
|
#endif
|
|
// <o> NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS - Number of words used as head guard. <0-255>
|
|
|
|
|
|
#ifndef NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS
|
|
#define NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS 1
|
|
#endif
|
|
|
|
// <o> NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS - Number of words used as tail guard. <0-255>
|
|
|
|
|
|
#ifndef NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS
|
|
#define NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS 1
|
|
#endif
|
|
|
|
// <q> NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED - Enables basic checks in this module.
|
|
|
|
|
|
#ifndef NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED
|
|
#define NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED 0
|
|
#endif
|
|
|
|
// <q> NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED - Enables double memory free check in this module.
|
|
|
|
|
|
#ifndef NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED
|
|
#define NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED 0
|
|
#endif
|
|
|
|
// <q> NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED - Enables free memory corruption check in this module.
|
|
|
|
|
|
#ifndef NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED
|
|
#define NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// </e>
|
|
|
|
// <q> NRF_FPRINTF_ENABLED - nrf_fprintf - fprintf function.
|
|
|
|
|
|
#ifndef NRF_FPRINTF_ENABLED
|
|
#define NRF_FPRINTF_ENABLED 1
|
|
#endif
|
|
|
|
// <q> NRF_MEMOBJ_ENABLED - nrf_memobj - Linked memory allocator module
|
|
|
|
|
|
#ifndef NRF_MEMOBJ_ENABLED
|
|
#define NRF_MEMOBJ_ENABLED 0
|
|
#endif
|
|
|
|
// <q> NRF_STRERROR_ENABLED - nrf_strerror - Library for converting error code to string.
|
|
|
|
|
|
#ifndef NRF_STRERROR_ENABLED
|
|
#define NRF_STRERROR_ENABLED 1
|
|
#endif
|
|
|
|
// </h>
|
|
//==========================================================
|
|
|
|
// <h> nRF_Log
|
|
|
|
//==========================================================
|
|
// <e> NRF_LOG_BACKEND_RTT_ENABLED - nrf_log_backend_rtt - Log RTT backend
|
|
//==========================================================
|
|
#ifndef NRF_LOG_BACKEND_RTT_ENABLED
|
|
#define NRF_LOG_BACKEND_RTT_ENABLED 0
|
|
#endif
|
|
// <o> NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings.
|
|
// <i> Size of the buffer is a trade-off between RAM usage and processing.
|
|
// <i> if buffer is smaller then strings will often be fragmented.
|
|
// <i> It is recommended to use size which will fit typical log and only the
|
|
// <i> longer one will be fragmented.
|
|
|
|
#ifndef NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE
|
|
#define NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE 64
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> NRF_LOG_BACKEND_UART_ENABLED - nrf_log_backend_uart - Log UART backend
|
|
//==========================================================
|
|
#ifndef NRF_LOG_BACKEND_UART_ENABLED
|
|
#define NRF_LOG_BACKEND_UART_ENABLED 0
|
|
#endif
|
|
// <o> NRF_LOG_BACKEND_UART_TX_PIN - UART TX pin
|
|
#ifndef NRF_LOG_BACKEND_UART_TX_PIN
|
|
#define NRF_LOG_BACKEND_UART_TX_PIN 6
|
|
#endif
|
|
|
|
// <o> NRF_LOG_BACKEND_UART_BAUDRATE - Default Baudrate
|
|
|
|
// <323584=> 1200 baud
|
|
// <643072=> 2400 baud
|
|
// <1290240=> 4800 baud
|
|
// <2576384=> 9600 baud
|
|
// <3862528=> 14400 baud
|
|
// <5152768=> 19200 baud
|
|
// <7716864=> 28800 baud
|
|
// <10289152=> 38400 baud
|
|
// <15400960=> 57600 baud
|
|
// <20615168=> 76800 baud
|
|
// <30801920=> 115200 baud
|
|
// <61865984=> 230400 baud
|
|
// <67108864=> 250000 baud
|
|
// <121634816=> 460800 baud
|
|
// <251658240=> 921600 baud
|
|
// <268435456=> 1000000 baud
|
|
|
|
#ifndef NRF_LOG_BACKEND_UART_BAUDRATE
|
|
#define NRF_LOG_BACKEND_UART_BAUDRATE 30801920
|
|
#endif
|
|
|
|
// <o> NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings.
|
|
// <i> Size of the buffer is a trade-off between RAM usage and processing.
|
|
// <i> if buffer is smaller then strings will often be fragmented.
|
|
// <i> It is recommended to use size which will fit typical log and only the
|
|
// <i> longer one will be fragmented.
|
|
|
|
#ifndef NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE
|
|
#define NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE 64
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <h> nrf_log - Logger
|
|
|
|
//==========================================================
|
|
// <e> NRF_LOG_ENABLED - Logging module for nRF5 SDK
|
|
//==========================================================
|
|
#ifndef NRF_LOG_ENABLED
|
|
#define NRF_LOG_ENABLED 0
|
|
#endif
|
|
// <e> NRF_LOG_USES_COLORS - If enabled then ANSI escape code for colors is prefixed to every string
|
|
//==========================================================
|
|
#ifndef NRF_LOG_USES_COLORS
|
|
#define NRF_LOG_USES_COLORS 0
|
|
#endif
|
|
// <o> NRF_LOG_COLOR_DEFAULT - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NRF_LOG_COLOR_DEFAULT
|
|
#define NRF_LOG_COLOR_DEFAULT 0
|
|
#endif
|
|
|
|
// <o> NRF_LOG_ERROR_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NRF_LOG_ERROR_COLOR
|
|
#define NRF_LOG_ERROR_COLOR 2
|
|
#endif
|
|
|
|
// <o> NRF_LOG_WARNING_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NRF_LOG_WARNING_COLOR
|
|
#define NRF_LOG_WARNING_COLOR 4
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <o> NRF_LOG_DEFAULT_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef NRF_LOG_DEFAULT_LEVEL
|
|
#define NRF_LOG_DEFAULT_LEVEL 3
|
|
#endif
|
|
|
|
// <q> NRF_LOG_DEFERRED - Enable deffered logger.
|
|
|
|
|
|
// <i> Log data is buffered and can be processed in idle.
|
|
|
|
#ifndef NRF_LOG_DEFERRED
|
|
#define NRF_LOG_DEFERRED 1
|
|
#endif
|
|
|
|
// <o> NRF_LOG_BUFSIZE - Size of the buffer for storing logs (in bytes).
|
|
|
|
|
|
// <i> Must be power of 2 and multiple of 4.
|
|
// <i> If NRF_LOG_DEFERRED = 0 then buffer size can be reduced to minimum.
|
|
// <128=> 128
|
|
// <256=> 256
|
|
// <512=> 512
|
|
// <1024=> 1024
|
|
// <2048=> 2048
|
|
// <4096=> 4096
|
|
// <8192=> 8192
|
|
// <16384=> 16384
|
|
|
|
#ifndef NRF_LOG_BUFSIZE
|
|
#define NRF_LOG_BUFSIZE 1024
|
|
#endif
|
|
|
|
// <q> NRF_LOG_ALLOW_OVERFLOW - Configures behavior when circular buffer is full.
|
|
|
|
|
|
// <i> If set then oldest logs are overwritten. Otherwise a
|
|
// <i> marker is injected informing about overflow.
|
|
|
|
#ifndef NRF_LOG_ALLOW_OVERFLOW
|
|
#define NRF_LOG_ALLOW_OVERFLOW 1
|
|
#endif
|
|
|
|
// <q> NRF_LOG_USES_TIMESTAMP - Enable timestamping
|
|
|
|
|
|
// <i> Function for getting the timestamp is provided by the user
|
|
|
|
#ifndef NRF_LOG_USES_TIMESTAMP
|
|
#define NRF_LOG_USES_TIMESTAMP 0
|
|
#endif
|
|
|
|
// <q> NRF_LOG_FILTERS_ENABLED - Enable dynamic filtering of logs.
|
|
|
|
|
|
#ifndef NRF_LOG_FILTERS_ENABLED
|
|
#define NRF_LOG_FILTERS_ENABLED 0
|
|
#endif
|
|
|
|
// <q> NRF_LOG_CLI_CMDS - Enable CLI commands for the module.
|
|
|
|
|
|
#ifndef NRF_LOG_CLI_CMDS
|
|
#define NRF_LOG_CLI_CMDS 0
|
|
#endif
|
|
|
|
// <h> Log message pool - Configuration of log message pool
|
|
|
|
//==========================================================
|
|
// <o> NRF_LOG_MSGPOOL_ELEMENT_SIZE - Size of a single element in the pool of memory objects.
|
|
// <i> If a small value is set, then performance of logs processing
|
|
// <i> is degraded because data is fragmented. Bigger value impacts
|
|
// <i> RAM memory utilization. The size is set to fit a message with
|
|
// <i> a timestamp and up to 2 arguments in a single memory object.
|
|
|
|
#ifndef NRF_LOG_MSGPOOL_ELEMENT_SIZE
|
|
#define NRF_LOG_MSGPOOL_ELEMENT_SIZE 20
|
|
#endif
|
|
|
|
// <o> NRF_LOG_MSGPOOL_ELEMENT_COUNT - Number of elements in the pool of memory objects
|
|
// <i> If a small value is set, then it may lead to a deadlock
|
|
// <i> in certain cases if backend has high latency and holds
|
|
// <i> multiple messages for long time. Bigger value impacts
|
|
// <i> RAM memory usage.
|
|
|
|
#ifndef NRF_LOG_MSGPOOL_ELEMENT_COUNT
|
|
#define NRF_LOG_MSGPOOL_ELEMENT_COUNT 8
|
|
#endif
|
|
|
|
// </h>
|
|
//==========================================================
|
|
|
|
// </e>
|
|
|
|
// <h> nrf_log module configuration
|
|
|
|
//==========================================================
|
|
// <h> nrf_log in nRF_Core
|
|
|
|
//==========================================================
|
|
// <e> NRF_MPU_CONFIG_LOG_ENABLED - Enables logging in the module.
|
|
//==========================================================
|
|
#ifndef NRF_MPU_CONFIG_LOG_ENABLED
|
|
#define NRF_MPU_CONFIG_LOG_ENABLED 0
|
|
#endif
|
|
// <o> NRF_MPU_CONFIG_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef NRF_MPU_CONFIG_LOG_LEVEL
|
|
#define NRF_MPU_CONFIG_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> NRF_MPU_CONFIG_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NRF_MPU_CONFIG_INFO_COLOR
|
|
#define NRF_MPU_CONFIG_INFO_COLOR 0
|
|
#endif
|
|
|
|
// <o> NRF_MPU_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NRF_MPU_CONFIG_DEBUG_COLOR
|
|
#define NRF_MPU_CONFIG_DEBUG_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> NRF_STACK_GUARD_CONFIG_LOG_ENABLED - Enables logging in the module.
|
|
//==========================================================
|
|
#ifndef NRF_STACK_GUARD_CONFIG_LOG_ENABLED
|
|
#define NRF_STACK_GUARD_CONFIG_LOG_ENABLED 0
|
|
#endif
|
|
// <o> NRF_STACK_GUARD_CONFIG_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef NRF_STACK_GUARD_CONFIG_LOG_LEVEL
|
|
#define NRF_STACK_GUARD_CONFIG_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> NRF_STACK_GUARD_CONFIG_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NRF_STACK_GUARD_CONFIG_INFO_COLOR
|
|
#define NRF_STACK_GUARD_CONFIG_INFO_COLOR 0
|
|
#endif
|
|
|
|
// <o> NRF_STACK_GUARD_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NRF_STACK_GUARD_CONFIG_DEBUG_COLOR
|
|
#define NRF_STACK_GUARD_CONFIG_DEBUG_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> TASK_MANAGER_CONFIG_LOG_ENABLED - Enables logging in the module.
|
|
//==========================================================
|
|
#ifndef TASK_MANAGER_CONFIG_LOG_ENABLED
|
|
#define TASK_MANAGER_CONFIG_LOG_ENABLED 0
|
|
#endif
|
|
// <o> TASK_MANAGER_CONFIG_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef TASK_MANAGER_CONFIG_LOG_LEVEL
|
|
#define TASK_MANAGER_CONFIG_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> TASK_MANAGER_CONFIG_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef TASK_MANAGER_CONFIG_INFO_COLOR
|
|
#define TASK_MANAGER_CONFIG_INFO_COLOR 0
|
|
#endif
|
|
|
|
// <o> TASK_MANAGER_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef TASK_MANAGER_CONFIG_DEBUG_COLOR
|
|
#define TASK_MANAGER_CONFIG_DEBUG_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// </h>
|
|
//==========================================================
|
|
|
|
// <h> nrf_log in nRF_Drivers
|
|
|
|
//==========================================================
|
|
// <e> CLOCK_CONFIG_LOG_ENABLED - Enables logging in the module.
|
|
//==========================================================
|
|
#ifndef CLOCK_CONFIG_LOG_ENABLED
|
|
#define CLOCK_CONFIG_LOG_ENABLED 0
|
|
#endif
|
|
// <o> CLOCK_CONFIG_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef CLOCK_CONFIG_LOG_LEVEL
|
|
#define CLOCK_CONFIG_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> CLOCK_CONFIG_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef CLOCK_CONFIG_INFO_COLOR
|
|
#define CLOCK_CONFIG_INFO_COLOR 0
|
|
#endif
|
|
|
|
// <o> CLOCK_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef CLOCK_CONFIG_DEBUG_COLOR
|
|
#define CLOCK_CONFIG_DEBUG_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> COMMON_CONFIG_LOG_ENABLED - Enables logging in the module.
|
|
//==========================================================
|
|
#ifndef COMMON_CONFIG_LOG_ENABLED
|
|
#define COMMON_CONFIG_LOG_ENABLED 0
|
|
#endif
|
|
// <o> COMMON_CONFIG_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef COMMON_CONFIG_LOG_LEVEL
|
|
#define COMMON_CONFIG_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> COMMON_CONFIG_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef COMMON_CONFIG_INFO_COLOR
|
|
#define COMMON_CONFIG_INFO_COLOR 0
|
|
#endif
|
|
|
|
// <o> COMMON_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef COMMON_CONFIG_DEBUG_COLOR
|
|
#define COMMON_CONFIG_DEBUG_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> COMP_CONFIG_LOG_ENABLED - Enables logging in the module.
|
|
//==========================================================
|
|
#ifndef COMP_CONFIG_LOG_ENABLED
|
|
#define COMP_CONFIG_LOG_ENABLED 0
|
|
#endif
|
|
// <o> COMP_CONFIG_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef COMP_CONFIG_LOG_LEVEL
|
|
#define COMP_CONFIG_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> COMP_CONFIG_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef COMP_CONFIG_INFO_COLOR
|
|
#define COMP_CONFIG_INFO_COLOR 0
|
|
#endif
|
|
|
|
// <o> COMP_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef COMP_CONFIG_DEBUG_COLOR
|
|
#define COMP_CONFIG_DEBUG_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
|
|
//==========================================================
|
|
#ifndef GPIOTE_CONFIG_LOG_ENABLED
|
|
#define GPIOTE_CONFIG_LOG_ENABLED 0
|
|
#endif
|
|
// <o> GPIOTE_CONFIG_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef GPIOTE_CONFIG_LOG_LEVEL
|
|
#define GPIOTE_CONFIG_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> GPIOTE_CONFIG_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef GPIOTE_CONFIG_INFO_COLOR
|
|
#define GPIOTE_CONFIG_INFO_COLOR 0
|
|
#endif
|
|
|
|
// <o> GPIOTE_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef GPIOTE_CONFIG_DEBUG_COLOR
|
|
#define GPIOTE_CONFIG_DEBUG_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> I2S_CONFIG_LOG_ENABLED - Enables logging in the module.
|
|
//==========================================================
|
|
#ifndef I2S_CONFIG_LOG_ENABLED
|
|
#define I2S_CONFIG_LOG_ENABLED 0
|
|
#endif
|
|
// <o> I2S_CONFIG_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef I2S_CONFIG_LOG_LEVEL
|
|
#define I2S_CONFIG_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> I2S_CONFIG_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef I2S_CONFIG_INFO_COLOR
|
|
#define I2S_CONFIG_INFO_COLOR 0
|
|
#endif
|
|
|
|
// <o> I2S_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef I2S_CONFIG_DEBUG_COLOR
|
|
#define I2S_CONFIG_DEBUG_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> LPCOMP_CONFIG_LOG_ENABLED - Enables logging in the module.
|
|
//==========================================================
|
|
#ifndef LPCOMP_CONFIG_LOG_ENABLED
|
|
#define LPCOMP_CONFIG_LOG_ENABLED 0
|
|
#endif
|
|
// <o> LPCOMP_CONFIG_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef LPCOMP_CONFIG_LOG_LEVEL
|
|
#define LPCOMP_CONFIG_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> LPCOMP_CONFIG_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef LPCOMP_CONFIG_INFO_COLOR
|
|
#define LPCOMP_CONFIG_INFO_COLOR 0
|
|
#endif
|
|
|
|
// <o> LPCOMP_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef LPCOMP_CONFIG_DEBUG_COLOR
|
|
#define LPCOMP_CONFIG_DEBUG_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> PDM_CONFIG_LOG_ENABLED - Enables logging in the module.
|
|
//==========================================================
|
|
#ifndef PDM_CONFIG_LOG_ENABLED
|
|
#define PDM_CONFIG_LOG_ENABLED 0
|
|
#endif
|
|
// <o> PDM_CONFIG_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef PDM_CONFIG_LOG_LEVEL
|
|
#define PDM_CONFIG_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> PDM_CONFIG_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef PDM_CONFIG_INFO_COLOR
|
|
#define PDM_CONFIG_INFO_COLOR 0
|
|
#endif
|
|
|
|
// <o> PDM_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef PDM_CONFIG_DEBUG_COLOR
|
|
#define PDM_CONFIG_DEBUG_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> PPI_CONFIG_LOG_ENABLED - Enables logging in the module.
|
|
//==========================================================
|
|
#ifndef PPI_CONFIG_LOG_ENABLED
|
|
#define PPI_CONFIG_LOG_ENABLED 0
|
|
#endif
|
|
// <o> PPI_CONFIG_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef PPI_CONFIG_LOG_LEVEL
|
|
#define PPI_CONFIG_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> PPI_CONFIG_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef PPI_CONFIG_INFO_COLOR
|
|
#define PPI_CONFIG_INFO_COLOR 0
|
|
#endif
|
|
|
|
// <o> PPI_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef PPI_CONFIG_DEBUG_COLOR
|
|
#define PPI_CONFIG_DEBUG_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> PWM_CONFIG_LOG_ENABLED - Enables logging in the module.
|
|
//==========================================================
|
|
#ifndef PWM_CONFIG_LOG_ENABLED
|
|
#define PWM_CONFIG_LOG_ENABLED 0
|
|
#endif
|
|
// <o> PWM_CONFIG_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef PWM_CONFIG_LOG_LEVEL
|
|
#define PWM_CONFIG_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> PWM_CONFIG_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef PWM_CONFIG_INFO_COLOR
|
|
#define PWM_CONFIG_INFO_COLOR 0
|
|
#endif
|
|
|
|
// <o> PWM_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef PWM_CONFIG_DEBUG_COLOR
|
|
#define PWM_CONFIG_DEBUG_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> QDEC_CONFIG_LOG_ENABLED - Enables logging in the module.
|
|
//==========================================================
|
|
#ifndef QDEC_CONFIG_LOG_ENABLED
|
|
#define QDEC_CONFIG_LOG_ENABLED 0
|
|
#endif
|
|
// <o> QDEC_CONFIG_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef QDEC_CONFIG_LOG_LEVEL
|
|
#define QDEC_CONFIG_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> QDEC_CONFIG_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef QDEC_CONFIG_INFO_COLOR
|
|
#define QDEC_CONFIG_INFO_COLOR 0
|
|
#endif
|
|
|
|
// <o> QDEC_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef QDEC_CONFIG_DEBUG_COLOR
|
|
#define QDEC_CONFIG_DEBUG_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> RNG_CONFIG_LOG_ENABLED - Enables logging in the module.
|
|
//==========================================================
|
|
#ifndef RNG_CONFIG_LOG_ENABLED
|
|
#define RNG_CONFIG_LOG_ENABLED 0
|
|
#endif
|
|
// <o> RNG_CONFIG_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef RNG_CONFIG_LOG_LEVEL
|
|
#define RNG_CONFIG_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> RNG_CONFIG_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef RNG_CONFIG_INFO_COLOR
|
|
#define RNG_CONFIG_INFO_COLOR 0
|
|
#endif
|
|
|
|
// <o> RNG_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef RNG_CONFIG_DEBUG_COLOR
|
|
#define RNG_CONFIG_DEBUG_COLOR 0
|
|
#endif
|
|
|
|
// <q> RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED - Enables logging of random numbers.
|
|
|
|
|
|
#ifndef RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED
|
|
#define RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> RTC_CONFIG_LOG_ENABLED - Enables logging in the module.
|
|
//==========================================================
|
|
#ifndef RTC_CONFIG_LOG_ENABLED
|
|
#define RTC_CONFIG_LOG_ENABLED 0
|
|
#endif
|
|
// <o> RTC_CONFIG_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef RTC_CONFIG_LOG_LEVEL
|
|
#define RTC_CONFIG_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> RTC_CONFIG_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef RTC_CONFIG_INFO_COLOR
|
|
#define RTC_CONFIG_INFO_COLOR 0
|
|
#endif
|
|
|
|
// <o> RTC_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef RTC_CONFIG_DEBUG_COLOR
|
|
#define RTC_CONFIG_DEBUG_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> SAADC_CONFIG_LOG_ENABLED - Enables logging in the module.
|
|
//==========================================================
|
|
#ifndef SAADC_CONFIG_LOG_ENABLED
|
|
#define SAADC_CONFIG_LOG_ENABLED 0
|
|
#endif
|
|
// <o> SAADC_CONFIG_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef SAADC_CONFIG_LOG_LEVEL
|
|
#define SAADC_CONFIG_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> SAADC_CONFIG_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef SAADC_CONFIG_INFO_COLOR
|
|
#define SAADC_CONFIG_INFO_COLOR 0
|
|
#endif
|
|
|
|
// <o> SAADC_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef SAADC_CONFIG_DEBUG_COLOR
|
|
#define SAADC_CONFIG_DEBUG_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> SPIS_CONFIG_LOG_ENABLED - Enables logging in the module.
|
|
//==========================================================
|
|
#ifndef SPIS_CONFIG_LOG_ENABLED
|
|
#define SPIS_CONFIG_LOG_ENABLED 0
|
|
#endif
|
|
// <o> SPIS_CONFIG_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef SPIS_CONFIG_LOG_LEVEL
|
|
#define SPIS_CONFIG_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> SPIS_CONFIG_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef SPIS_CONFIG_INFO_COLOR
|
|
#define SPIS_CONFIG_INFO_COLOR 0
|
|
#endif
|
|
|
|
// <o> SPIS_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef SPIS_CONFIG_DEBUG_COLOR
|
|
#define SPIS_CONFIG_DEBUG_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> SPI_CONFIG_LOG_ENABLED - Enables logging in the module.
|
|
//==========================================================
|
|
#ifndef SPI_CONFIG_LOG_ENABLED
|
|
#define SPI_CONFIG_LOG_ENABLED 0
|
|
#endif
|
|
// <o> SPI_CONFIG_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef SPI_CONFIG_LOG_LEVEL
|
|
#define SPI_CONFIG_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> SPI_CONFIG_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef SPI_CONFIG_INFO_COLOR
|
|
#define SPI_CONFIG_INFO_COLOR 0
|
|
#endif
|
|
|
|
// <o> SPI_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef SPI_CONFIG_DEBUG_COLOR
|
|
#define SPI_CONFIG_DEBUG_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> SWI_CONFIG_LOG_ENABLED - Enables logging in the module.
|
|
//==========================================================
|
|
#ifndef SWI_CONFIG_LOG_ENABLED
|
|
#define SWI_CONFIG_LOG_ENABLED 0
|
|
#endif
|
|
// <o> SWI_CONFIG_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef SWI_CONFIG_LOG_LEVEL
|
|
#define SWI_CONFIG_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> SWI_CONFIG_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef SWI_CONFIG_INFO_COLOR
|
|
#define SWI_CONFIG_INFO_COLOR 0
|
|
#endif
|
|
|
|
// <o> SWI_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef SWI_CONFIG_DEBUG_COLOR
|
|
#define SWI_CONFIG_DEBUG_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
|
|
//==========================================================
|
|
#ifndef TIMER_CONFIG_LOG_ENABLED
|
|
#define TIMER_CONFIG_LOG_ENABLED 0
|
|
#endif
|
|
// <o> TIMER_CONFIG_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef TIMER_CONFIG_LOG_LEVEL
|
|
#define TIMER_CONFIG_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> TIMER_CONFIG_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef TIMER_CONFIG_INFO_COLOR
|
|
#define TIMER_CONFIG_INFO_COLOR 0
|
|
#endif
|
|
|
|
// <o> TIMER_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef TIMER_CONFIG_DEBUG_COLOR
|
|
#define TIMER_CONFIG_DEBUG_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> TWIS_CONFIG_LOG_ENABLED - Enables logging in the module.
|
|
//==========================================================
|
|
#ifndef TWIS_CONFIG_LOG_ENABLED
|
|
#define TWIS_CONFIG_LOG_ENABLED 0
|
|
#endif
|
|
// <o> TWIS_CONFIG_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef TWIS_CONFIG_LOG_LEVEL
|
|
#define TWIS_CONFIG_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> TWIS_CONFIG_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef TWIS_CONFIG_INFO_COLOR
|
|
#define TWIS_CONFIG_INFO_COLOR 0
|
|
#endif
|
|
|
|
// <o> TWIS_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef TWIS_CONFIG_DEBUG_COLOR
|
|
#define TWIS_CONFIG_DEBUG_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> TWI_CONFIG_LOG_ENABLED - Enables logging in the module.
|
|
//==========================================================
|
|
#ifndef TWI_CONFIG_LOG_ENABLED
|
|
#define TWI_CONFIG_LOG_ENABLED 0
|
|
#endif
|
|
// <o> TWI_CONFIG_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef TWI_CONFIG_LOG_LEVEL
|
|
#define TWI_CONFIG_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> TWI_CONFIG_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef TWI_CONFIG_INFO_COLOR
|
|
#define TWI_CONFIG_INFO_COLOR 0
|
|
#endif
|
|
|
|
// <o> TWI_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef TWI_CONFIG_DEBUG_COLOR
|
|
#define TWI_CONFIG_DEBUG_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> UART_CONFIG_LOG_ENABLED - Enables logging in the module.
|
|
//==========================================================
|
|
#ifndef UART_CONFIG_LOG_ENABLED
|
|
#define UART_CONFIG_LOG_ENABLED 0
|
|
#endif
|
|
// <o> UART_CONFIG_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef UART_CONFIG_LOG_LEVEL
|
|
#define UART_CONFIG_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> UART_CONFIG_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef UART_CONFIG_INFO_COLOR
|
|
#define UART_CONFIG_INFO_COLOR 0
|
|
#endif
|
|
|
|
// <o> UART_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef UART_CONFIG_DEBUG_COLOR
|
|
#define UART_CONFIG_DEBUG_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> USBD_CONFIG_LOG_ENABLED - Enable logging in the module
|
|
//==========================================================
|
|
#ifndef USBD_CONFIG_LOG_ENABLED
|
|
#define USBD_CONFIG_LOG_ENABLED 0
|
|
#endif
|
|
// <o> USBD_CONFIG_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef USBD_CONFIG_LOG_LEVEL
|
|
#define USBD_CONFIG_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> USBD_CONFIG_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef USBD_CONFIG_INFO_COLOR
|
|
#define USBD_CONFIG_INFO_COLOR 0
|
|
#endif
|
|
|
|
// <o> USBD_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef USBD_CONFIG_DEBUG_COLOR
|
|
#define USBD_CONFIG_DEBUG_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> WDT_CONFIG_LOG_ENABLED - Enables logging in the module.
|
|
//==========================================================
|
|
#ifndef WDT_CONFIG_LOG_ENABLED
|
|
#define WDT_CONFIG_LOG_ENABLED 0
|
|
#endif
|
|
// <o> WDT_CONFIG_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef WDT_CONFIG_LOG_LEVEL
|
|
#define WDT_CONFIG_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> WDT_CONFIG_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef WDT_CONFIG_INFO_COLOR
|
|
#define WDT_CONFIG_INFO_COLOR 0
|
|
#endif
|
|
|
|
// <o> WDT_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef WDT_CONFIG_DEBUG_COLOR
|
|
#define WDT_CONFIG_DEBUG_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// </h>
|
|
//==========================================================
|
|
|
|
// <h> nrf_log in nRF_Libraries
|
|
|
|
//==========================================================
|
|
// <e> APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED - Enables logging in the module.
|
|
//==========================================================
|
|
#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED
|
|
#define APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED 0
|
|
#endif
|
|
// <o> APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL
|
|
#define APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> APP_USBD_CDC_ACM_CONFIG_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef APP_USBD_CDC_ACM_CONFIG_INFO_COLOR
|
|
#define APP_USBD_CDC_ACM_CONFIG_INFO_COLOR 0
|
|
#endif
|
|
|
|
// <o> APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR
|
|
#define APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> APP_USBD_MSC_CONFIG_LOG_ENABLED - Enables logging in the module.
|
|
//==========================================================
|
|
#ifndef APP_USBD_MSC_CONFIG_LOG_ENABLED
|
|
#define APP_USBD_MSC_CONFIG_LOG_ENABLED 0
|
|
#endif
|
|
// <o> APP_USBD_MSC_CONFIG_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef APP_USBD_MSC_CONFIG_LOG_LEVEL
|
|
#define APP_USBD_MSC_CONFIG_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> APP_USBD_MSC_CONFIG_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef APP_USBD_MSC_CONFIG_INFO_COLOR
|
|
#define APP_USBD_MSC_CONFIG_INFO_COLOR 0
|
|
#endif
|
|
|
|
// <o> APP_USBD_MSC_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef APP_USBD_MSC_CONFIG_DEBUG_COLOR
|
|
#define APP_USBD_MSC_CONFIG_DEBUG_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> NRF_BALLOC_CONFIG_LOG_ENABLED - Enables logging in the module.
|
|
//==========================================================
|
|
#ifndef NRF_BALLOC_CONFIG_LOG_ENABLED
|
|
#define NRF_BALLOC_CONFIG_LOG_ENABLED 0
|
|
#endif
|
|
// <o> NRF_BALLOC_CONFIG_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef NRF_BALLOC_CONFIG_LOG_LEVEL
|
|
#define NRF_BALLOC_CONFIG_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> NRF_BALLOC_CONFIG_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NRF_BALLOC_CONFIG_INFO_COLOR
|
|
#define NRF_BALLOC_CONFIG_INFO_COLOR 0
|
|
#endif
|
|
|
|
// <o> NRF_BALLOC_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NRF_BALLOC_CONFIG_DEBUG_COLOR
|
|
#define NRF_BALLOC_CONFIG_DEBUG_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
|
|
//==========================================================
|
|
#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED
|
|
#define NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED 0
|
|
#endif
|
|
// <o> NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL
|
|
#define NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> NRF_CLI_BLE_UART_CONFIG_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NRF_CLI_BLE_UART_CONFIG_INFO_COLOR
|
|
#define NRF_CLI_BLE_UART_CONFIG_INFO_COLOR 0
|
|
#endif
|
|
|
|
// <o> NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR
|
|
#define NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> NRF_CLI_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
|
|
//==========================================================
|
|
#ifndef NRF_CLI_UART_CONFIG_LOG_ENABLED
|
|
#define NRF_CLI_UART_CONFIG_LOG_ENABLED 0
|
|
#endif
|
|
// <o> NRF_CLI_UART_CONFIG_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef NRF_CLI_UART_CONFIG_LOG_LEVEL
|
|
#define NRF_CLI_UART_CONFIG_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> NRF_CLI_UART_CONFIG_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NRF_CLI_UART_CONFIG_INFO_COLOR
|
|
#define NRF_CLI_UART_CONFIG_INFO_COLOR 0
|
|
#endif
|
|
|
|
// <o> NRF_CLI_UART_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NRF_CLI_UART_CONFIG_DEBUG_COLOR
|
|
#define NRF_CLI_UART_CONFIG_DEBUG_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> NRF_MEMOBJ_CONFIG_LOG_ENABLED - Enables logging in the module.
|
|
//==========================================================
|
|
#ifndef NRF_MEMOBJ_CONFIG_LOG_ENABLED
|
|
#define NRF_MEMOBJ_CONFIG_LOG_ENABLED 0
|
|
#endif
|
|
// <o> NRF_MEMOBJ_CONFIG_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef NRF_MEMOBJ_CONFIG_LOG_LEVEL
|
|
#define NRF_MEMOBJ_CONFIG_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> NRF_MEMOBJ_CONFIG_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NRF_MEMOBJ_CONFIG_INFO_COLOR
|
|
#define NRF_MEMOBJ_CONFIG_INFO_COLOR 0
|
|
#endif
|
|
|
|
// <o> NRF_MEMOBJ_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NRF_MEMOBJ_CONFIG_DEBUG_COLOR
|
|
#define NRF_MEMOBJ_CONFIG_DEBUG_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> NRF_PWR_MGMT_CONFIG_LOG_ENABLED - Enables logging in the module.
|
|
//==========================================================
|
|
#ifndef NRF_PWR_MGMT_CONFIG_LOG_ENABLED
|
|
#define NRF_PWR_MGMT_CONFIG_LOG_ENABLED 0
|
|
#endif
|
|
// <o> NRF_PWR_MGMT_CONFIG_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef NRF_PWR_MGMT_CONFIG_LOG_LEVEL
|
|
#define NRF_PWR_MGMT_CONFIG_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> NRF_PWR_MGMT_CONFIG_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NRF_PWR_MGMT_CONFIG_INFO_COLOR
|
|
#define NRF_PWR_MGMT_CONFIG_INFO_COLOR 0
|
|
#endif
|
|
|
|
// <o> NRF_PWR_MGMT_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_COLOR
|
|
#define NRF_PWR_MGMT_CONFIG_DEBUG_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> NRF_SDH_ANT_LOG_ENABLED - Enable logging in SoftDevice handler (ANT) module.
|
|
//==========================================================
|
|
#ifndef NRF_SDH_ANT_LOG_ENABLED
|
|
#define NRF_SDH_ANT_LOG_ENABLED 0
|
|
#endif
|
|
// <o> NRF_SDH_ANT_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef NRF_SDH_ANT_LOG_LEVEL
|
|
#define NRF_SDH_ANT_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> NRF_SDH_ANT_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NRF_SDH_ANT_INFO_COLOR
|
|
#define NRF_SDH_ANT_INFO_COLOR 0
|
|
#endif
|
|
|
|
// <o> NRF_SDH_ANT_DEBUG_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NRF_SDH_ANT_DEBUG_COLOR
|
|
#define NRF_SDH_ANT_DEBUG_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> NRF_SDH_BLE_LOG_ENABLED - Enable logging in SoftDevice handler (BLE) module.
|
|
//==========================================================
|
|
#ifndef NRF_SDH_BLE_LOG_ENABLED
|
|
#define NRF_SDH_BLE_LOG_ENABLED 0
|
|
#endif
|
|
// <o> NRF_SDH_BLE_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef NRF_SDH_BLE_LOG_LEVEL
|
|
#define NRF_SDH_BLE_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> NRF_SDH_BLE_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NRF_SDH_BLE_INFO_COLOR
|
|
#define NRF_SDH_BLE_INFO_COLOR 0
|
|
#endif
|
|
|
|
// <o> NRF_SDH_BLE_DEBUG_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NRF_SDH_BLE_DEBUG_COLOR
|
|
#define NRF_SDH_BLE_DEBUG_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> NRF_SDH_LOG_ENABLED - Enable logging in SoftDevice handler module.
|
|
//==========================================================
|
|
#ifndef NRF_SDH_LOG_ENABLED
|
|
#define NRF_SDH_LOG_ENABLED 0
|
|
#endif
|
|
// <o> NRF_SDH_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef NRF_SDH_LOG_LEVEL
|
|
#define NRF_SDH_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> NRF_SDH_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NRF_SDH_INFO_COLOR
|
|
#define NRF_SDH_INFO_COLOR 0
|
|
#endif
|
|
|
|
// <o> NRF_SDH_DEBUG_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NRF_SDH_DEBUG_COLOR
|
|
#define NRF_SDH_DEBUG_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> NRF_SDH_SOC_LOG_ENABLED - Enable logging in SoftDevice handler (SoC) module.
|
|
//==========================================================
|
|
#ifndef NRF_SDH_SOC_LOG_ENABLED
|
|
#define NRF_SDH_SOC_LOG_ENABLED 0
|
|
#endif
|
|
// <o> NRF_SDH_SOC_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef NRF_SDH_SOC_LOG_LEVEL
|
|
#define NRF_SDH_SOC_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> NRF_SDH_SOC_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NRF_SDH_SOC_INFO_COLOR
|
|
#define NRF_SDH_SOC_INFO_COLOR 0
|
|
#endif
|
|
|
|
// <o> NRF_SDH_SOC_DEBUG_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NRF_SDH_SOC_DEBUG_COLOR
|
|
#define NRF_SDH_SOC_DEBUG_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> NRF_SORTLIST_CONFIG_LOG_ENABLED - Enables logging in the module.
|
|
//==========================================================
|
|
#ifndef NRF_SORTLIST_CONFIG_LOG_ENABLED
|
|
#define NRF_SORTLIST_CONFIG_LOG_ENABLED 0
|
|
#endif
|
|
// <o> NRF_SORTLIST_CONFIG_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef NRF_SORTLIST_CONFIG_LOG_LEVEL
|
|
#define NRF_SORTLIST_CONFIG_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> NRF_SORTLIST_CONFIG_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NRF_SORTLIST_CONFIG_INFO_COLOR
|
|
#define NRF_SORTLIST_CONFIG_INFO_COLOR 0
|
|
#endif
|
|
|
|
// <o> NRF_SORTLIST_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NRF_SORTLIST_CONFIG_DEBUG_COLOR
|
|
#define NRF_SORTLIST_CONFIG_DEBUG_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// </h>
|
|
//==========================================================
|
|
|
|
// </h>
|
|
//==========================================================
|
|
|
|
// </h>
|
|
//==========================================================
|
|
|
|
// </h>
|
|
//==========================================================
|
|
|
|
// <h> nRF_Segger_RTT
|
|
|
|
//==========================================================
|
|
// <h> segger_rtt - SEGGER RTT
|
|
|
|
//==========================================================
|
|
// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_UP - Size of upstream buffer.
|
|
// <i> Note that either @ref NRF_LOG_BACKEND_RTT_OUTPUT_BUFFER_SIZE
|
|
// <i> or this value is actually used. It depends on which one is bigger.
|
|
|
|
#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_UP
|
|
#define SEGGER_RTT_CONFIG_BUFFER_SIZE_UP 512
|
|
#endif
|
|
|
|
// <o> SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS - Size of upstream buffer.
|
|
#ifndef SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS
|
|
#define SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS 2
|
|
#endif
|
|
|
|
// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN - Size of upstream buffer.
|
|
#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN
|
|
#define SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN 16
|
|
#endif
|
|
|
|
// <o> SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS - Size of upstream buffer.
|
|
#ifndef SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS
|
|
#define SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS 2
|
|
#endif
|
|
|
|
// <o> SEGGER_RTT_CONFIG_DEFAULT_MODE - RTT behavior if the buffer is full.
|
|
|
|
|
|
// <i> The following modes are supported:
|
|
// <i> - SKIP - Do not block, output nothing.
|
|
// <i> - TRIM - Do not block, output as much as fits.
|
|
// <i> - BLOCK - Wait until there is space in the buffer.
|
|
// <0=> SKIP
|
|
// <1=> TRIM
|
|
// <2=> BLOCK_IF_FIFO_FULL
|
|
|
|
#ifndef SEGGER_RTT_CONFIG_DEFAULT_MODE
|
|
#define SEGGER_RTT_CONFIG_DEFAULT_MODE 0
|
|
#endif
|
|
|
|
// </h>
|
|
//==========================================================
|
|
|
|
// </h>
|
|
//==========================================================
|
|
|
|
// <<< end of configuration section >>>
|
|
#endif //SDK_CONFIG_H
|
|
|