mirror of
https://github.com/hathach/tinyusb.git
synced 2025-01-17 05:32:55 +08:00
606 lines
20 KiB
C
606 lines
20 KiB
C
/*
|
|
* @brief LPC13xx SSP Registers and control functions
|
|
*
|
|
* @note
|
|
* Copyright(C) NXP Semiconductors, 2012
|
|
* All rights reserved.
|
|
*
|
|
* @par
|
|
* Software that is described herein is for illustrative purposes only
|
|
* which provides customers with programming information regarding the
|
|
* LPC products. This software is supplied "AS IS" without any warranties of
|
|
* any kind, and NXP Semiconductors and its licensor disclaim any and
|
|
* all warranties, express or implied, including all implied warranties of
|
|
* merchantability, fitness for a particular purpose and non-infringement of
|
|
* intellectual property rights. NXP Semiconductors assumes no responsibility
|
|
* or liability for the use of the software, conveys no license or rights under any
|
|
* patent, copyright, mask work right, or any other intellectual property rights in
|
|
* or to any products. NXP Semiconductors reserves the right to make changes
|
|
* in the software without notification. NXP Semiconductors also makes no
|
|
* representation or warranty that such application will be suitable for the
|
|
* specified use without further testing or modification.
|
|
*
|
|
* @par
|
|
* Permission to use, copy, modify, and distribute this software and its
|
|
* documentation is hereby granted, under NXP Semiconductors' and its
|
|
* licensor's relevant copyrights in the software, without fee, provided that it
|
|
* is used in conjunction with NXP Semiconductors microcontrollers. This
|
|
* copyright, permission, and disclaimer notice must appear in all copies of
|
|
* this code.
|
|
*/
|
|
|
|
#ifndef __SSP_13XX_H_
|
|
#define __SSP_13XX_H_
|
|
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
|
|
/** @defgroup SSP_13XX CHIP: LPC13xx SSP register block and driver
|
|
* @ingroup CHIP_13XX_Drivers
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief SSP register block structure
|
|
*/
|
|
typedef struct { /*!< SSPn Structure */
|
|
__IO uint32_t CR0; /*!< Control Register 0. Selects the serial clock rate, bus type, and data size. */
|
|
__IO uint32_t CR1; /*!< Control Register 1. Selects master/slave and other modes. */
|
|
__IO uint32_t DR; /*!< Data Register. Writes fill the transmit FIFO, and reads empty the receive FIFO. */
|
|
__I uint32_t SR; /*!< Status Register */
|
|
__IO uint32_t CPSR; /*!< Clock Prescale Register */
|
|
__IO uint32_t IMSC; /*!< Interrupt Mask Set and Clear Register */
|
|
__I uint32_t RIS; /*!< Raw Interrupt Status Register */
|
|
__I uint32_t MIS; /*!< Masked Interrupt Status Register */
|
|
__O uint32_t ICR; /*!< SSPICR Interrupt Clear Register */
|
|
#if !defined(CHIP_LPC110X) && !defined(CHIP_LPC11XXLV) && !defined(CHIP_LPC11AXX) && \
|
|
!defined(CHIP_LPC11CXX) && !defined(CHIP_LPC11EXX) && !defined(CHIP_LPC11UXX)
|
|
__IO uint32_t DMACR; /*!< SSPn DMA control register */
|
|
#endif
|
|
} LPC_SSP_T;
|
|
|
|
/**
|
|
* Macro defines for CR0 register
|
|
*/
|
|
|
|
/** SSP data size select, must be 4 bits to 16 bits */
|
|
#define SSP_CR0_DSS(n) ((uint32_t) ((n) & 0xF))
|
|
/** SSP control 0 Motorola SPI mode */
|
|
#define SSP_CR0_FRF_SPI ((uint32_t) (0 << 4))
|
|
/** SSP control 0 TI synchronous serial mode */
|
|
#define SSP_CR0_FRF_TI ((uint32_t) (1 << 4))
|
|
/** SSP control 0 National Micro-wire mode */
|
|
#define SSP_CR0_FRF_MICROWIRE ((uint32_t) (2 << 4))
|
|
/** SPI clock polarity bit (used in SPI mode only), (1) = maintains the
|
|
bus clock high between frames, (0) = low */
|
|
#define SSP_CR0_CPOL_LO ((uint32_t) (0))
|
|
#define SSP_CR0_CPOL_HI ((uint32_t) (1 << 6))
|
|
/** SPI clock out phase bit (used in SPI mode only), (1) = captures data
|
|
on the second clock transition of the frame, (0) = first */
|
|
#define SSP_CR0_CPHA_FIRST ((uint32_t) (0))
|
|
#define SSP_CR0_CPHA_SECOND ((uint32_t) (1 << 7))
|
|
/** SSP serial clock rate value load macro, divider rate is
|
|
PERIPH_CLK / (cpsr * (SCR + 1)) */
|
|
#define SSP_CR0_SCR(n) ((uint32_t) ((n & 0xFF) << 8))
|
|
/** SSP CR0 bit mask */
|
|
#define SSP_CR0_BITMASK ((uint32_t) (0xFFFF))
|
|
/** SSP CR0 bit mask */
|
|
#define SSP_CR0_BITMASK ((uint32_t) (0xFFFF))
|
|
/** SSP serial clock rate value load macro, divider rate is
|
|
PERIPH_CLK / (cpsr * (SCR + 1)) */
|
|
#define SSP_CR0_SCR(n) ((uint32_t) ((n & 0xFF) << 8))
|
|
|
|
/**
|
|
* Macro defines for CR1 register
|
|
*/
|
|
|
|
/** SSP control 1 loopback mode enable bit */
|
|
#define SSP_CR1_LBM_EN ((uint32_t) (1 << 0))
|
|
/** SSP control 1 enable bit */
|
|
#define SSP_CR1_SSP_EN ((uint32_t) (1 << 1))
|
|
/** SSP control 1 slave enable */
|
|
#define SSP_CR1_SLAVE_EN ((uint32_t) (1 << 2))
|
|
#define SSP_CR1_MASTER_EN ((uint32_t) (0))
|
|
/** SSP control 1 slave out disable bit, disables transmit line in slave
|
|
mode */
|
|
#define SSP_CR1_SO_DISABLE ((uint32_t) (1 << 3))
|
|
/** SSP CR1 bit mask */
|
|
#define SSP_CR1_BITMASK ((uint32_t) (0x0F))
|
|
|
|
/** SSP CPSR bit mask */
|
|
#define SSP_CPSR_BITMASK ((uint32_t) (0xFF))
|
|
/**
|
|
* Macro defines for DR register
|
|
*/
|
|
|
|
/** SSP data bit mask */
|
|
#define SSP_DR_BITMASK(n) ((n) & 0xFFFF)
|
|
|
|
/**
|
|
* Macro defines for SR register
|
|
*/
|
|
|
|
/** SSP SR bit mask */
|
|
#define SSP_SR_BITMASK ((uint32_t) (0x1F))
|
|
|
|
/** ICR bit mask */
|
|
#define SSP_ICR_BITMASK ((uint32_t) (0x03))
|
|
|
|
/**
|
|
* @brief SSP Type of Status
|
|
*/
|
|
typedef enum _SSP_STATUS {
|
|
SSP_STAT_TFE = ((uint32_t)(1 << 0)),/**< TX FIFO Empty */
|
|
SSP_STAT_TNF = ((uint32_t)(1 << 1)),/**< TX FIFO not full */
|
|
SSP_STAT_RNE = ((uint32_t)(1 << 2)),/**< RX FIFO not empty */
|
|
SSP_STAT_RFF = ((uint32_t)(1 << 3)),/**< RX FIFO full */
|
|
SSP_STAT_BSY = ((uint32_t)(1 << 4)),/**< SSP Busy */
|
|
} SSP_STATUS_T;
|
|
|
|
/**
|
|
* @brief SSP Type of Interrupt Mask
|
|
*/
|
|
typedef enum _SSP_INTMASK {
|
|
SSP_RORIM = ((uint32_t)(1 << 0)), /**< Overun */
|
|
SSP_RTIM = ((uint32_t)(1 << 1)),/**< TimeOut */
|
|
SSP_RXIM = ((uint32_t)(1 << 2)),/**< Rx FIFO is at least half full */
|
|
SSP_TXIM = ((uint32_t)(1 << 3)),/**< Tx FIFO is at least half empty */
|
|
SSP_INT_MASK_BITMASK = ((uint32_t)(0xF)),
|
|
} SSP_INTMASK_T;
|
|
|
|
/**
|
|
* @brief SSP Type of Mask Interrupt Status
|
|
*/
|
|
typedef enum _SSP_MASKINTSTATUS {
|
|
SSP_RORMIS = ((uint32_t)(1 << 0)), /**< Overun */
|
|
SSP_RTMIS = ((uint32_t)(1 << 1)), /**< TimeOut */
|
|
SSP_RXMIS = ((uint32_t)(1 << 2)), /**< Rx FIFO is at least half full */
|
|
SSP_TXMIS = ((uint32_t)(1 << 3)), /**< Tx FIFO is at least half empty */
|
|
SSP_MASK_INT_STAT_BITMASK = ((uint32_t)(0xF)),
|
|
} SSP_MASKINTSTATUS_T;
|
|
|
|
/**
|
|
* @brief SSP Type of Raw Interrupt Status
|
|
*/
|
|
typedef enum _SSP_RAWINTSTATUS {
|
|
SSP_RORRIS = ((uint32_t)(1 << 0)), /**< Overun */
|
|
SSP_RTRIS = ((uint32_t)(1 << 1)), /**< TimeOut */
|
|
SSP_RXRIS = ((uint32_t)(1 << 2)), /**< Rx FIFO is at least half full */
|
|
SSP_TXRIS = ((uint32_t)(1 << 3)), /**< Tx FIFO is at least half empty */
|
|
SSP_RAW_INT_STAT_BITMASK = ((uint32_t)(0xF)),
|
|
} SSP_RAWINTSTATUS_T;
|
|
|
|
typedef enum _SSP_INTCLEAR {
|
|
SSP_RORIC = 0x0,
|
|
SSP_RTIC = 0x1,
|
|
SSP_INT_CLEAR_BITMASK = 0x3,
|
|
} SSP_INTCLEAR_T;
|
|
|
|
typedef enum _SSP_DMA {
|
|
SSP_DMA_RX = (1u), /**< DMA RX Enable */
|
|
SSP_DMA_TX = (1u << 1), /**< DMA TX Enable */
|
|
SSP_DMA_BITMASK = ((uint32_t)(0x3)),
|
|
} SSP_DMA_T;
|
|
|
|
/*
|
|
* @brief SSP clock format
|
|
*/
|
|
typedef enum CHIP_SSP_CLOCK_FORMAT {
|
|
SSP_CLOCK_CPHA0_CPOL0 = (0 << 6), /**< CPHA = 0, CPOL = 0 */
|
|
SSP_CLOCK_CPHA0_CPOL1 = (1u << 6), /**< CPHA = 0, CPOL = 1 */
|
|
SSP_CLOCK_CPHA1_CPOL0 = (2u << 6), /**< CPHA = 1, CPOL = 0 */
|
|
SSP_CLOCK_CPHA1_CPOL1 = (3u << 6), /**< CPHA = 1, CPOL = 1 */
|
|
SSP_CLOCK_MODE0 = SSP_CLOCK_CPHA0_CPOL0,/**< alias */
|
|
SSP_CLOCK_MODE1 = SSP_CLOCK_CPHA1_CPOL0,/**< alias */
|
|
SSP_CLOCK_MODE2 = SSP_CLOCK_CPHA0_CPOL1,/**< alias */
|
|
SSP_CLOCK_MODE3 = SSP_CLOCK_CPHA1_CPOL1,/**< alias */
|
|
} CHIP_SSP_CLOCK_MODE_T;
|
|
|
|
/*
|
|
* @brief SSP frame format
|
|
*/
|
|
typedef enum CHIP_SSP_FRAME_FORMAT {
|
|
SSP_FRAMEFORMAT_SPI = (0 << 4), /**< Frame format: SPI */
|
|
CHIP_SSP_FRAME_FORMAT_TI = (1u << 4), /**< Frame format: TI SSI */
|
|
SSP_FRAMEFORMAT_MICROWIRE = (2u << 4), /**< Frame format: Microwire */
|
|
} CHIP_SSP_FRAME_FORMAT_T;
|
|
|
|
/*
|
|
* @brief Number of bits per frame
|
|
*/
|
|
typedef enum CHIP_SSP_BITS {
|
|
SSP_BITS_4 = (3u << 0), /*!< 4 bits/frame */
|
|
SSP_BITS_5 = (4u << 0), /*!< 5 bits/frame */
|
|
SSP_BITS_6 = (5u << 0), /*!< 6 bits/frame */
|
|
SSP_BITS_7 = (6u << 0), /*!< 7 bits/frame */
|
|
SSP_BITS_8 = (7u << 0), /*!< 8 bits/frame */
|
|
SSP_BITS_9 = (8u << 0), /*!< 9 bits/frame */
|
|
SSP_BITS_10 = (9u << 0), /*!< 10 bits/frame */
|
|
SSP_BITS_11 = (10u << 0), /*!< 11 bits/frame */
|
|
SSP_BITS_12 = (11u << 0), /*!< 12 bits/frame */
|
|
SSP_BITS_13 = (12u << 0), /*!< 13 bits/frame */
|
|
SSP_BITS_14 = (13u << 0), /*!< 14 bits/frame */
|
|
SSP_BITS_15 = (14u << 0), /*!< 15 bits/frame */
|
|
SSP_BITS_16 = (15u << 0), /*!< 16 bits/frame */
|
|
} CHIP_SSP_BITS_T;
|
|
|
|
/*
|
|
* @brief SSP config format
|
|
*/
|
|
typedef struct SSP_ConfigFormat {
|
|
CHIP_SSP_BITS_T bits; /*!< Format config: bits/frame */
|
|
CHIP_SSP_CLOCK_MODE_T clockMode; /*!< Format config: clock phase/polarity */
|
|
CHIP_SSP_FRAME_FORMAT_T frameFormat; /*!< Format config: SPI/TI/Microwire */
|
|
} SSP_ConfigFormat;
|
|
|
|
/**
|
|
* @brief Enable SSP operation
|
|
* @param pSSP : The base of SSP peripheral on the chip
|
|
* @return Nothing
|
|
*/
|
|
STATIC INLINE void Chip_SSP_Enable(LPC_SSP_T *pSSP)
|
|
{
|
|
pSSP->CR1 |= SSP_CR1_SSP_EN;
|
|
}
|
|
|
|
/**
|
|
* @brief Disable SSP operation
|
|
* @param pSSP : The base of SSP peripheral on the chip
|
|
* @return Nothing
|
|
*/
|
|
STATIC INLINE void Chip_SSP_Disable(LPC_SSP_T *pSSP)
|
|
{
|
|
pSSP->CR1 &= (~SSP_CR1_SSP_EN) & SSP_CR1_BITMASK;
|
|
}
|
|
|
|
/**
|
|
* @brief Enable loopback mode
|
|
* @param pSSP : The base of SSP peripheral on the chip
|
|
* @return Nothing
|
|
* @note Serial input is taken from the serial output (MOSI or MISO) rather
|
|
* than the serial input pin
|
|
*/
|
|
STATIC INLINE void Chip_SSP_EnableLoopBack(LPC_SSP_T *pSSP)
|
|
{
|
|
pSSP->CR1 |= SSP_CR1_LBM_EN;
|
|
}
|
|
|
|
/**
|
|
* @brief Disable loopback mode
|
|
* @param pSSP : The base of SSP peripheral on the chip
|
|
* @return Nothing
|
|
* @note Serial input is taken from the serial output (MOSI or MISO) rather
|
|
* than the serial input pin
|
|
*/
|
|
STATIC INLINE void Chip_SSP_DisableLoopBack(LPC_SSP_T *pSSP)
|
|
{
|
|
pSSP->CR1 &= (~SSP_CR1_LBM_EN) & SSP_CR1_BITMASK;
|
|
}
|
|
|
|
/**
|
|
* @brief Get the current status of SSP controller
|
|
* @param pSSP : The base of SSP peripheral on the chip
|
|
* @param Stat : Type of status, should be :
|
|
* - SSP_STAT_TFE
|
|
* - SSP_STAT_TNF
|
|
* - SSP_STAT_RNE
|
|
* - SSP_STAT_RFF
|
|
* - SSP_STAT_BSY
|
|
* @return SSP controller status, SET or RESET
|
|
*/
|
|
STATIC INLINE FlagStatus Chip_SSP_GetStatus(LPC_SSP_T *pSSP, SSP_STATUS_T Stat)
|
|
{
|
|
return (pSSP->SR & Stat) ? SET : RESET;
|
|
}
|
|
|
|
/**
|
|
* @brief Get the masked interrupt status
|
|
* @param pSSP : The base of SSP peripheral on the chip
|
|
* @return SSP Masked Interrupt Status Register value
|
|
* @note The return value contains a 1 for each interrupt condition that is asserted and enabled (masked)
|
|
*/
|
|
STATIC INLINE uint32_t Chip_SSP_GetIntStatus(LPC_SSP_T *pSSP)
|
|
{
|
|
return pSSP->MIS;
|
|
}
|
|
|
|
/**
|
|
* @brief Get the raw interrupt status
|
|
* @param pSSP : The base of SSP peripheral on the chip
|
|
* @param RawInt : Interrupt condition to be get status, shoud be :
|
|
* - SSP_RORRIS
|
|
* - SSP_RTRIS
|
|
* - SSP_RXRIS
|
|
* - SSP_TXRIS
|
|
* @return Raw interrupt status corresponding to interrupt condition , SET or RESET
|
|
* @note Get the status of each interrupt condition ,regardless of whether or not the interrupt is enabled
|
|
*/
|
|
STATIC INLINE IntStatus Chip_SSP_GetRawIntStatus(LPC_SSP_T *pSSP, SSP_RAWINTSTATUS_T RawInt)
|
|
{
|
|
return (pSSP->RIS & RawInt) ? SET : RESET;
|
|
}
|
|
|
|
/**
|
|
* @brief Get the number of bits transferred in each frame
|
|
* @param pSSP : The base of SSP peripheral on the chip
|
|
* @return the number of bits transferred in each frame minus one
|
|
* @note The return value is 0x03 -> 0xF corresponding to 4bit -> 16bit transfer
|
|
*/
|
|
STATIC INLINE uint8_t Chip_SSP_GetDataSize(LPC_SSP_T *pSSP)
|
|
{
|
|
return SSP_CR0_DSS(pSSP->CR0);
|
|
}
|
|
|
|
/**
|
|
* @brief Clear the corresponding interrupt condition(s) in the SSP controller
|
|
* @param pSSP : The base of SSP peripheral on the chip
|
|
* @param IntClear: Type of cleared interrupt, should be :
|
|
* - SSP_RORIC
|
|
* - SSP_RTIC
|
|
* @return Nothing
|
|
* @note Software can clear one or more interrupt condition(s) in the SSP controller
|
|
*/
|
|
STATIC INLINE void Chip_SSP_ClearIntPending(LPC_SSP_T *pSSP, SSP_INTCLEAR_T IntClear)
|
|
{
|
|
pSSP->ICR = IntClear;
|
|
}
|
|
|
|
/**
|
|
* @brief Enable interrupt for the SSP
|
|
* @param pSSP : The base of SSP peripheral on the chip
|
|
* @return Nothing
|
|
*/
|
|
STATIC INLINE void Chip_SSP_Int_Enable(LPC_SSP_T *pSSP)
|
|
{
|
|
pSSP->IMSC |= SSP_TXIM;
|
|
}
|
|
|
|
/**
|
|
* @brief Disable interrupt for the SSP
|
|
* @param pSSP : The base of SSP peripheral on the chip
|
|
* @return Nothing
|
|
*/
|
|
STATIC INLINE void Chip_SSP_Int_Disable(LPC_SSP_T *pSSP)
|
|
{
|
|
pSSP->IMSC &= (~SSP_TXIM);
|
|
}
|
|
|
|
/**
|
|
* @brief Get received SSP data
|
|
* @param pSSP : The base of SSP peripheral on the chip
|
|
* @return SSP 16-bit data received
|
|
*/
|
|
STATIC INLINE uint16_t Chip_SSP_ReceiveFrame(LPC_SSP_T *pSSP)
|
|
{
|
|
return (uint16_t) (SSP_DR_BITMASK(pSSP->DR));
|
|
}
|
|
|
|
/**
|
|
* @brief Send SSP 16-bit data
|
|
* @param pSSP : The base of SSP peripheral on the chip
|
|
* @param tx_data : SSP 16-bit data to be transmited
|
|
* @return Nothing
|
|
*/
|
|
STATIC INLINE void Chip_SSP_SendFrame(LPC_SSP_T *pSSP, uint16_t tx_data)
|
|
{
|
|
pSSP->DR = SSP_DR_BITMASK(tx_data);
|
|
}
|
|
|
|
/**
|
|
* @brief Set up output clocks per bit for SSP bus
|
|
* @param pSSP : The base of SSP peripheral on the chip
|
|
* @param clk_rate fs: The number of prescaler-output clocks per bit on the bus, minus one
|
|
* @param prescale : The factor by which the Prescaler divides the SSP peripheral clock PCLK
|
|
* @return Nothing
|
|
* @note The bit frequency is PCLK / (prescale x[clk_rate+1])
|
|
*/
|
|
void Chip_SSP_SetClockRate(LPC_SSP_T *pSSP, uint32_t clk_rate, uint32_t prescale);
|
|
|
|
/**
|
|
* @brief Set up the SSP frame format
|
|
* @param pSSP : The base of SSP peripheral on the chip
|
|
* @param bits : The number of bits transferred in each frame, should be SSP_BITS_4 to SSP_BITS_16
|
|
* @param frameFormat : Frame format, should be :
|
|
* - SSP_FRAMEFORMAT_SPI
|
|
* - SSP_FRAME_FORMAT_TI
|
|
* - SSP_FRAMEFORMAT_MICROWIRE
|
|
* @param clockMode : Select Clock polarity and Clock phase, should be :
|
|
* - SSP_CLOCK_CPHA0_CPOL0
|
|
* - SSP_CLOCK_CPHA0_CPOL1
|
|
* - SSP_CLOCK_CPHA1_CPOL0
|
|
* - SSP_CLOCK_CPHA1_CPOL1
|
|
* @return Nothing
|
|
* @note Note: The clockFormat is only used in SPI mode
|
|
*/
|
|
STATIC INLINE void Chip_SSP_SetFormat(LPC_SSP_T *pSSP, uint32_t bits, uint32_t frameFormat, uint32_t clockMode)
|
|
{
|
|
pSSP->CR0 = (pSSP->CR0 & ~0xFF) | bits | frameFormat | clockMode;
|
|
}
|
|
|
|
/**
|
|
* @brief Set the SSP working as master or slave mode
|
|
* @param pSSP : The base of SSP peripheral on the chip
|
|
* @param mode : Operating mode, should be
|
|
* - SSP_MODE_MASTER
|
|
* - SSP_MODE_SLAVE
|
|
* @return Nothing
|
|
*/
|
|
STATIC INLINE void Chip_SSP_Set_Mode(LPC_SSP_T *pSSP, uint32_t mode)
|
|
{
|
|
pSSP->CR1 = (pSSP->CR1 & ~(1 << 2)) | mode;
|
|
}
|
|
|
|
#if !defined(CHIP_LPC110X) && !defined(CHIP_LPC11XXLV) && !defined(CHIP_LPC11AXX) && \
|
|
!defined(CHIP_LPC11CXX) && !defined(CHIP_LPC11EXX) && !defined(CHIP_LPC11UXX)
|
|
/**
|
|
* @brief Enable DMA for SSP
|
|
* @param pSSP : The base of SSP peripheral on the chip
|
|
* @return Nothing
|
|
*/
|
|
STATIC INLINE void Chip_SSP_DMA_Enable(LPC_SSP_T *pSSP)
|
|
{
|
|
pSSP->DMACR |= SSP_DMA_BITMASK;
|
|
}
|
|
|
|
/**
|
|
* @brief Disable DMA for SSP
|
|
* @param pSSP : The base of SSP peripheral on the chip
|
|
* @return Nothing
|
|
*/
|
|
STATIC INLINE void Chip_SSP_DMA_Disable(LPC_SSP_T *pSSP)
|
|
{
|
|
pSSP->DMACR &= ~SSP_DMA_BITMASK;
|
|
}
|
|
|
|
#endif
|
|
|
|
/*
|
|
* @brief SSP mode
|
|
*/
|
|
typedef enum CHIP_SSP_MODE {
|
|
SSP_MODE_MASTER = (0 << 2), /**< Master mode */
|
|
SSP_MODE_SLAVE = (1u << 2), /**< Slave mode */
|
|
} CHIP_SSP_MODE_T;
|
|
|
|
/*
|
|
* @brief SPI address
|
|
*/
|
|
typedef struct {
|
|
uint8_t port; /*!< Port Number */
|
|
uint8_t pin; /*!< Pin number */
|
|
} SPI_Address_t;
|
|
|
|
/*
|
|
* @brief SSP data setup structure
|
|
*/
|
|
typedef struct {
|
|
void *tx_data; /*!< Pointer to transmit data */
|
|
uint32_t tx_cnt; /*!< Transmit counter */
|
|
void *rx_data; /*!< Pointer to transmit data */
|
|
uint32_t rx_cnt; /*!< Receive counter */
|
|
uint32_t length; /*!< Length of transfer data */
|
|
} Chip_SSP_DATA_SETUP_T;
|
|
|
|
/** SSP configuration parameter defines */
|
|
/** Clock phase control bit */
|
|
#define SSP_CPHA_FIRST SSP_CR0_CPHA_FIRST
|
|
#define SSP_CPHA_SECOND SSP_CR0_CPHA_SECOND
|
|
|
|
/** Clock polarity control bit */
|
|
/* There's no bug here!!!
|
|
* - If bit[6] in SSPnCR0 is 0: SSP controller maintains the bus clock low between frames.
|
|
* That means the active clock is in HI state.
|
|
* - If bit[6] in SSPnCR0 is 1 (SSP_CR0_CPOL_HI): SSP controller maintains the bus clock
|
|
* high between frames. That means the active clock is in LO state.
|
|
*/
|
|
#define SSP_CPOL_HI SSP_CR0_CPOL_LO
|
|
#define SSP_CPOL_LO SSP_CR0_CPOL_HI
|
|
|
|
/** SSP master mode enable */
|
|
#define SSP_SLAVE_MODE SSP_CR1_SLAVE_EN
|
|
#define SSP_MASTER_MODE SSP_CR1_MASTER_EN
|
|
|
|
/**
|
|
* @brief Clean all data in RX FIFO of SSP
|
|
* @param pSSP : The base SSP peripheral on the chip
|
|
* @return Nothing
|
|
*/
|
|
void Chip_SSP_Int_FlushData(LPC_SSP_T *pSSP);
|
|
|
|
/**
|
|
* @brief SSP Interrupt Read/Write with 8-bit frame width
|
|
* @param pSSP : The base SSP peripheral on the chip
|
|
* @param xf_setup : Pointer to a SSP_DATA_SETUP_T structure that contains specified
|
|
* information about transmit/receive data configuration
|
|
* @return SUCCESS or ERROR
|
|
*/
|
|
Status Chip_SSP_Int_RWFrames8Bits(LPC_SSP_T *pSSP, Chip_SSP_DATA_SETUP_T *xf_setup);
|
|
|
|
/**
|
|
* @brief SSP Interrupt Read/Write with 16-bit frame width
|
|
* @param pSSP : The base SSP peripheral on the chip
|
|
* @param xf_setup : Pointer to a SSP_DATA_SETUP_T structure that contains specified
|
|
* information about transmit/receive data configuration
|
|
* @return SUCCESS or ERROR
|
|
*/
|
|
Status Chip_SSP_Int_RWFrames16Bits(LPC_SSP_T *pSSP, Chip_SSP_DATA_SETUP_T *xf_setup);
|
|
|
|
/**
|
|
* @brief SSP Polling Read/Write in blocking mode
|
|
* @param pSSP : The base SSP peripheral on the chip
|
|
* @param xf_setup : Pointer to a SSP_DATA_SETUP_T structure that contains specified
|
|
* information about transmit/receive data configuration
|
|
* @return Actual data length has been transferred
|
|
* @note
|
|
* This function can be used in both master and slave mode. It starts with writing phase and after that,
|
|
* a reading phase is generated to read any data available in RX_FIFO. All needed information is prepared
|
|
* through xf_setup param.
|
|
*/
|
|
uint32_t Chip_SSP_RWFrames_Blocking(LPC_SSP_T *pSSP, Chip_SSP_DATA_SETUP_T *xf_setup);
|
|
|
|
/**
|
|
* @brief SSP Polling Write in blocking mode
|
|
* @param pSSP : The base SSP peripheral on the chip
|
|
* @param buffer : Buffer address
|
|
* @param buffer_len : Buffer length
|
|
* @return Actual data length has been transferred
|
|
* @note
|
|
* This function can be used in both master and slave mode. First, a writing operation will send
|
|
* the needed data. After that, a dummy reading operation is generated to clear data buffer
|
|
*/
|
|
uint32_t Chip_SSP_WriteFrames_Blocking(LPC_SSP_T *pSSP, uint8_t *buffer, uint32_t buffer_len);
|
|
|
|
/**
|
|
* @brief SSP Polling Read in blocking mode
|
|
* @param pSSP : The base SSP peripheral on the chip
|
|
* @param buffer : Buffer address
|
|
* @param buffer_len : The length of buffer
|
|
* @return Actual data length has been transferred
|
|
* @note
|
|
* This function can be used in both master and slave mode. First, a dummy writing operation is generated
|
|
* to clear data buffer. After that, a reading operation will receive the needed data
|
|
*/
|
|
uint32_t Chip_SSP_ReadFrames_Blocking(LPC_SSP_T *pSSP, uint8_t *buffer, uint32_t buffer_len);
|
|
|
|
/**
|
|
* @brief Initialize the SSP
|
|
* @param pSSP : The base SSP peripheral on the chip
|
|
* @return Nothing
|
|
*/
|
|
void Chip_SSP_Init(LPC_SSP_T *pSSP);
|
|
|
|
/**
|
|
* @brief Deinitialise the SSP
|
|
* @param pSSP : The base of SSP peripheral on the chip
|
|
* @return Nothing
|
|
* @note The SSP controller is disabled
|
|
*/
|
|
void Chip_SSP_DeInit(LPC_SSP_T *pSSP);
|
|
|
|
/**
|
|
* @brief Set the SSP operating modes, master or slave
|
|
* @param pSSP : The base SSP peripheral on the chip
|
|
* @param master : 1 to set master, 0 to set slave
|
|
* @return Nothing
|
|
*/
|
|
void Chip_SSP_SetMaster(LPC_SSP_T *pSSP, bool master);
|
|
|
|
/**
|
|
* @brief Set the clock frequency for SSP interface
|
|
* @param pSSP : The base SSP peripheral on the chip
|
|
* @param bitRate : The SSP bit rate
|
|
* @return Nothing
|
|
*/
|
|
void Chip_SSP_SetBitRate(LPC_SSP_T *pSSP, uint32_t bitRate);
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
#endif /* __SSP_13XX_H_ */
|