Restored simplified Verilog version of edge_detect

delay.v

@@ -22,10 +22,10 @@
 
 /* --- INSTANTIATION TEMPLATE BEGIN ---
 
-delay S1 #(
+delay #(
   .LENGTH( 2 ),
   .WIDTH( 1 )
-)(
+) S1 (
   .clk( clk ),
   .nrst( 1'b1 ),
   .ena( 1'b1 ),

edge_detect.v

@@ -0,0 +1,62 @@
+//------------------------------------------------------------------------------
+// edge_detect.v
+// published as part of https://github.com/pConst/basic_verilog
+// Konstantin Pavlov, pavlovconst@gmail.com
+//------------------------------------------------------------------------------
+
+// INFO ------------------------------------------------------------------------
+// Edge detector, ver.4
+// (simplified Verilog version, see ./edge_detect.sv for advanced features)
+//
+// In case when "in" port has toggle rate 100% (changes every clock period)
+//    "rising" and "falling" outputs will completely replicate input
+//    "both" output will be always active in this case
+//
+
+/* --- INSTANTIATION TEMPLATE BEGIN ---
+
+edge_detect #(
+  .WIDTH( 32 )
+) ED1 (
+  .clk( clk ),
+  .anrst( 1'b1 ),
+  .in( in[31:0] ),
+  .rising( in_rise[31:0] ),
+  .falling(  ),
+  .both(  )
+);
+
+--- INSTANTIATION TEMPLATE END ---*/
+
+
+module edge_detect #( parameter
+  bit [7:0] WIDTH = 1
+)(
+  input clk,
+  input anrst,
+
+  input  [WIDTH-1:0] in,
+
+  output [WIDTH-1:0] rising,
+  output [WIDTH-1:0] falling,
+  output [WIDTH-1:0] both
+);
+
+  // data delay line
+  reg [WIDTH-1:0] in_d = '0;
+  always_ff @(posedge clk or negedge anrst) begin
+    if ( ~anrst ) begin
+      in_d[WIDTH-1:0] <= '0;
+    end else begin
+      in_d[WIDTH-1:0] <= in[WIDTH-1:0];
+    end
+  end
+
+  always @(*) begin
+    rising[WIDTH-1:0] = {WIDTH{anrst}} & (in[WIDTH-1:0] & ~in_d[WIDTH-1:0]);
+    falling[WIDTH-1:0] = {WIDTH{anrst}} & (~in[WIDTH-1:0] & in_d[WIDTH-1:0]);
+
+    both[WIDTH-1:0] = rising[WIDTH-1:0] | falling[WIDTH-1:0];
+  end
+
+endmodule