From c243e1d9189a351d7190f520e82d1ec29a7f6a97 Mon Sep 17 00:00:00 2001 From: Konstantin Pavlov Date: Fri, 5 Feb 2021 16:10:16 +0300 Subject: [PATCH] Added Quartus Makefile. Customizable and gives faster compilation --- scripts/Makefile | 207 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 207 insertions(+) create mode 100644 scripts/Makefile diff --git a/scripts/Makefile b/scripts/Makefile new file mode 100644 index 0000000..05441ee --- /dev/null +++ b/scripts/Makefile @@ -0,0 +1,207 @@ +#------------------------------------------------------------------------------ +# Makefile for Intel / Altera Quartus +# Konstantin Pavlov, pavlovconst@gmail.com +# +# +# INFO ------------------------------------------------------------------------ +# +# - Use this Makefile in linux terminal or on Windows under Cygwin +# +# - Default target ("make" command without any options) is intended to get fast +# compilation and timing analysis. Suitable for general project development +# and debugging +# +# - "make -j" runs timing analysis and *.sof file assembling in parallel. That +# saves you ~20 seconds every time :) +# +# - Specific targets (for example, "make sof") provide you requested results +# assuming that timing analysis is unnexessary +# +# - Check that Quartus and Modelsim directories are in your $PATH. Something like +# echo $PATH | tr : \\n | grep quartus +# export PATH = '/cygdrive/c/intelFPGA/17.0/quartus/bin64:$PATH' +# export PATH = '/cygdrive/c/intelFPGA/17.0/quartus/bin:$PATH' +# echo $PATH | tr : \\n | grep modelsim +# export PATH = '/cygdrive/c/intelFPGA/17.0/modelsim_ase/win32aloem:$PATH' + + + +PROJ_DIR = $(shell pwd) +PROJ = $(shell ls -1 *.qpf | tail -n1 | awk '{ gsub(".qpf","") } 1' ) +#SRCS = $(shell ls -R1 SOURCE/*.{v,sv,vh,sdc,tcl,hex,bin} 2>/dev/null | grep -v ':' ) +№SRCS = $(shell ls -R1 SOURCE/* ) + +QPF = $(PROJ).qpf +QSF = $(PROJ).qsf +SOF = ./OUTPUT/$(PROJ).sof +POF = ./OUTPUT/$(PROJ).pof +RBF = ./OUTPUT/$(PROJ).rbf +JAM = ./OUTPUT/$(PROJ).jam + +PRE_SCRIPT = './DEBUG/pre_flow.tcl' +POST_SCRIPT = './DEBUG/post_flow.tcl' + +MAP_REPORT = ./OUTPUT/$(PROJ).map.rpt +FIT_REPORT = ./OUTPUT/$(PROJ).fit.rpt + +DSE_CONFIG = $(PROJ).dse + +TARGET_IP = '192.168.1.1' +TARGET_PORT = 'USB-1' +TARGET_CHIP = '1' + + + +.PHONY: all info clean stp gui + + +all: sta sof + + +info: + echo -e \\n ' Project directory: ' $(PROJ_DIR) \ + \\n ' Project name: ' $(PROJ) \ + \\n ' Preject sources: ' $(SRCS) + +gui: + quartus $(QPF) 1>/dev/null + + +$(MAP_REPORT): $(SRCS) $(QPF) $(QSF) + $(shell if test -f $(PRE_SCRIPT); then quartus_sh -t $(PRE_SCRIPT) compile $(PROJ) $(PROJ); fi ) + quartus_map --no_banner \ + --read_settings_files=on \ + --write_settings_files=off \ + --64bit $(PROJ) -c $(PROJ) + # dont use --effort=fast because it can dramatically increase fitting time +map: $(PROJ).map.rpt + + +$(FIT_REPORT): $(MAP_REPORT) + # quartus_cdb --read_settings_files=on \ + # --write_settings_files=off \ + # --64bit $(PROJ) -c $(PROJ) + quartus_fit --no_banner \ + --read_settings_files=on \ + --write_settings_files=off \ + --inner_num=1 \ + --one_fit_attempt=on \ + --pack_register=off \ + --effort=fast \ + --64bit $(PROJ) -c $(PROJ) + # using --io_smart_recompile for secondary fitter launches is tricky +fit: $(FIT_REPORT) + + +$(SOF): $(FIT_REPORT) + quartus_asm --no_banner \ + --read_settings_files=off \ + --write_settings_files=off \ + --64bit $(PROJ) -c $(PROJ) +asm: $(SOF) + + +sta: $(FIT_REPORT) + quartus_sta $(PROJ) -c $(PROJ) + #$(shell if test -f $(POST_SCRIPT); then quartus_sh -t $(POST_SCRIPT) compile $(PROJ) $(PROJ); fi ) + +stap: $(FIT_REPORT) + quartus_sta --parallel --model=slow $(PROJ) -c $(PROJ) + #$(shell if test -f $(POST_SCRIPT); then quartus_sh -t $(POST_SCRIPT) compile $(PROJ) $(PROJ); fi ) + + +$(POF): $(SOF) + quartus_cpf --no_banner \ + -c $(SOF) $(POF) +$(RBF): $(SOF) + quartus_cpf --no_banner \ + -c $(SOF) $(RBF) +$(JAM): $(SOF) + quartus_cpf --no_banner \ + -c $(SOF) $(JAM) +sof: $(SOF) +pof: $(POF) +rbf: $(RBF) +jam: $(JAM) + + +prog: sof + quartus_pgm --no_banner \ + -c "USB-Blaster on $(TARGET_IP) [$(TARGET_PORT)]" -m jtag \ + -o "P;$(SOF)@$(TARGET_CHIP)" + +prog_pof: pof + quartus_pgm --no_banner \ + -c "USB-Blaster on $(TARGET_IP) [$(TARGET_PORT)]" -m jtag \ + -o "BVP;$(POF)@$(TARGET_CHIP)" + +prog_rbf: rbf + quartus_pgm --no_banner \ + -c "USB-Blaster on $(TARGET_IP) [$(TARGET_PORT)]" -m jtag \ + -o "BVP;$(RBF)@$(TARGET_CHIP)" + + +clean: + # clean common junk files + rm -rfv $(PROJ).qws c5_pin_model_dump.txt $(PROJ).ipregen.rpt .qsys_edit/ + # clean compilation databases + rm -rfv db/ incremental_db/ greybox_tmp/ + # clean output directory + rm -rfv OUTPUT/ + # clean hard memory controller + rm -rfv ddr3_hmc_ddr3_0_p0_0_summary.csv ddr3_hmc_ddr3_0_p0_1_summary.csv + # clean design space explorer files + rm -rfv dse/ dse1_base.qpf dse1_base.qsf $(PROJ).dse.rpt $(PROJ).archive.rpt + # clean early power estimator files + rm -rfv $(PROJ)_early_pwr.csv + # TODO: add project-specific files to remove here + + + +dse: $(DSE_CONFIG) + quartus_dse --no_banner \ + --terminate off \ + --num-parallel-processors 10 \ + --auto-discover-files on \ + --revision $(PROJ) $(PROJ).qpf \ + --use-dse-file $(DSE_CONFIG) + + +sim: $(SRCS) + modelsim -do compile.tcl + +sim_clean: + + +gtkwave: $(SRCS) + # creating VVP file + iverilog -Wall -g2012 -o iverilog_sim.vvp -s $(SRCS) + # creating VCD file + vvp -v iverilog_sim.vvp + # creating settings file for gtkwave on-the-fly + echo fontname_waves Verdana 9 > .\gtkwaverc + echo fontname_signals Verdana 9 >> .\gtkwaverc + echo fontname_logfile Verdana 9 >> .\gtkwaverc + echo splash_disable 1 >> .\gtkwaverc + echo use_roundcaps 1 >> .\gtkwaverc + echo force_toolbars 1 >> .\gtkwaverc + echo left_justify_sigs 1 >> .\gtkwaverc + # launching gtkwave + # press CTRL+S to save vawe config. gtkwave will open it automatically next time + gtkwave -r .\gtkwaverc iverilog_sim.vcd wave.gtkw + + # // place this code into your testbench and add signals you want to dump + # // and navigate during simulation + # initial begin + # $dumpfile("iverilog_sim.vcd"); + # $dumpvars( 0, M ); + # #10000 $finish; + # end + + +stp: + quartus_stp --no_banner \ + $(QPF) + + +