mirror of
https://github.com/pConst/basic_verilog.git
synced 2025-01-14 06:42:54 +08:00
84 lines
2.3 KiB
Verilog
84 lines
2.3 KiB
Verilog
//--------------------------------------------------------------------------------
|
|
// ActionBurst.v
|
|
// Konstantin Pavlov, pavlovconst@gmail.com
|
|
//--------------------------------------------------------------------------------
|
|
|
|
// INFO --------------------------------------------------------------------------------
|
|
// Module is designed to generate one-shot trigger pulses on multiple channels (default is 8)
|
|
// Every output channel is triggered only once
|
|
// Channels get triggered in sequense from out[0] to out[8]
|
|
// That is useful when you need to start some tasks in exact order, but there are no convinient signals to line them up.
|
|
// Instance of ActionBurst() is started by high level on start input and the only way to stop generation before all channels get triggered is to reset the instance
|
|
|
|
|
|
/* --- INSTANTIATION TEMPLATE BEGIN ---
|
|
|
|
ActionBurst AB1 (
|
|
.clk( ),
|
|
.nrst( 1'b1 ),
|
|
.step_wdth( ),
|
|
.start( ),
|
|
.busy( ),
|
|
.out( )
|
|
);
|
|
defparam AB1.WIDTH = 8;
|
|
|
|
--- INSTANTIATION TEMPLATE END ---*/
|
|
|
|
|
|
module ActionBurst(clk,nrst,step_wdth,start,busy,out);
|
|
|
|
parameter WIDTH = 8;
|
|
|
|
input wire clk;
|
|
input wire nrst;
|
|
input wire [31:0] step_wdth; // Module buffers step_wdth in PG instance on the SECOND cycle ater start applyed!
|
|
input wire start;
|
|
output reg busy = 0;
|
|
output wire [(WIDTH-1):0] out;
|
|
|
|
wire PgOut;
|
|
reg [31:0] state = 0;
|
|
//reg [31:0] step_wdth_buf = 0; // buffering is done in PG
|
|
|
|
PulseGen PG(
|
|
.clk( clk ),
|
|
.nrst( start || busy ),
|
|
.low_wdth( step_wdth[31:0] ),
|
|
.high_wdth( 32'b1 ),
|
|
.rpt( 1'b1 ),
|
|
.start( busy ),
|
|
.busy( ),
|
|
.out( PgOut )
|
|
);
|
|
|
|
always @ (posedge clk) begin
|
|
if (~nrst) begin
|
|
state[31:0] <= 0;
|
|
end else begin
|
|
if (~busy) begin
|
|
if (start) begin // buffering input values
|
|
state[31:0] <= 0;
|
|
//step_wdth_buf[31:0] <= step_wdth[31:0]; // buffering is done in PG
|
|
busy <= 1;
|
|
end // start
|
|
end else begin
|
|
if (PgOut) begin
|
|
if (state != (WIDTH-1)) begin
|
|
state[31:0] <= state[31:0] + 1'b1;
|
|
end else begin
|
|
busy <= 0;
|
|
end // state
|
|
end // PgOut
|
|
end // busy
|
|
end // nrst
|
|
end
|
|
|
|
genvar i;
|
|
generate
|
|
for (i=0; i<WIDTH; i=i+1) begin : AB_GEN_FOR
|
|
assign out[i] = PgOut && ( i == state[31:0] );
|
|
end
|
|
endgenerate
|
|
|
|
endmodule |