corundum/scripts/pcie_set_speed.sh

#!/bin/bash

dev=$1
speed=$2

if [ -z "$dev" ]; then
    echo "Error: no device specified"
    exit 1
fi

if [ ! -e "/sys/bus/pci/devices/$dev" ]; then
    dev="0000:$dev"
fi

if [ ! -e "/sys/bus/pci/devices/$dev" ]; then
    echo "Error: device $dev not found"
    exit 1
fi

pciec=$(setpci -s $dev CAP_EXP+02.W)
pt=$(((0x$pciec & 0xF0) >> 4))

port=$(basename $(dirname $(readlink "/sys/bus/pci/devices/$dev")))

if (($pt == 0)) || (($pt == 1)) || (($pt == 5)); then
    dev=$port
fi

lc=$(setpci -s $dev CAP_EXP+0c.L)
ls=$(setpci -s $dev CAP_EXP+12.W)

max_speed=$((0x$lc & 0xF))

echo "Link capabilities:" $lc
echo "Max link speed:" $max_speed
echo "Link status:" $ls
echo "Current link speed:" $((0x$ls & 0xF))

if [ -z "$speed" ]; then
    speed=$max_speed
fi

if (($speed > $max_speed)); then
    speed=$max_speed
fi

echo "Configuring $dev..."

lc2=$(setpci -s $dev CAP_EXP+30.L)

echo "Original link control 2:" $lc2
echo "Original link target speed:" $((0x$lc2 & 0xF))

lc2n=$(printf "%08x" $(((0x$lc2 & 0xFFFFFFF0) | $speed)))

echo "New target link speed:" $speed
echo "New link control 2:" $lc2n

setpci -s $dev CAP_EXP+30.L=$lc2n

echo "Triggering link retraining..."

lc=$(setpci -s $dev CAP_EXP+10.L)

echo "Original link control:" $lc

lcn=$(printf "%08x" $((0x$lc | 0x20)))

echo "New link control:" $lcn

setpci -s $dev CAP_EXP+10.L=$lcn

sleep 0.1

ls=$(setpci -s $dev CAP_EXP+12.W)

echo "Link status:" $ls
echo "Current link speed:" $((0x$ls & 0xF))