corundum/modules/mqnic/mqnic_board.c

/*

Copyright 2021, The Regents of the University of California.
All rights reserved.

Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:

   1. Redistributions of source code must retain the above copyright notice,
      this list of conditions and the following disclaimer.

   2. Redistributions in binary form must reproduce the above copyright notice,
      this list of conditions and the following disclaimer in the documentation
      and/or other materials provided with the distribution.

THIS SOFTWARE IS PROVIDED BY THE REGENTS OF THE UNIVERSITY OF CALIFORNIA ''AS
IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE REGENTS OF THE UNIVERSITY OF CALIFORNIA OR
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT
OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
OF SUCH DAMAGE.

The views and conclusions contained in the software and documentation are those
of the authors and should not be interpreted as representing official policies,
either expressed or implied, of The Regents of the University of California.

*/

#include "mqnic.h"

#include <linux/module.h>
#include <linux/i2c-mux.h>
#include <linux/version.h>

static const struct property_entry i2c_mux_props[] = {
	PROPERTY_ENTRY_BOOL("i2c-mux-idle-disconnect"),
	{}
};

static struct i2c_client *create_i2c_client(struct i2c_adapter *adapter,
		const char *type, int addr, const struct property_entry *props)
{
	struct i2c_client *client;
	struct i2c_board_info board_info;
#if LINUX_VERSION_CODE >= KERNEL_VERSION(5, 13, 0)
	struct software_node sw_node;
#endif
	int err;

	if (!adapter)
		return NULL;

	memset(&board_info, 0, sizeof(board_info));
	strscpy(board_info.type, type, I2C_NAME_SIZE);
	board_info.addr = addr;
	if (props) {
#if LINUX_VERSION_CODE >= KERNEL_VERSION(5, 13, 0)
		memset(&sw_node, 0, sizeof(sw_node));
		sw_node.properties = props;
		board_info.swnode = &sw_node;
#else
		board_info.properties = props;
#endif
	}
#if LINUX_VERSION_CODE >= KERNEL_VERSION(5, 2, 0)
	client = i2c_new_client_device(adapter, &board_info);
#else
	client = i2c_new_device(adapter, &board_info);
#endif

	if (!client)
		return NULL;

	// force driver load (mainly for muxes so we can talk to downstream devices)
	err = device_attach(&client->dev);
	if (err < 0)
		goto err_free_client;

	return client;

err_free_client:
	i2c_unregister_device(client);
	return NULL;
}

static struct i2c_adapter *get_i2c_mux_channel(struct i2c_client *mux, u32 chan_id)
{
	struct i2c_mux_core *muxc;

	if (!mux)
		return NULL;

	muxc = i2c_get_clientdata(mux);

	if (!muxc || chan_id >= muxc->num_adapters)
		return NULL;

	return muxc->adapter[chan_id];
}

static int init_mac_list_from_base_mac(struct mqnic_dev *mqnic, int count, char *mac)
{
	int k;

	count = min(count, MQNIC_MAX_IF);

	if (!is_valid_ether_addr(mac)) {
		dev_warn(mqnic->dev, "Base MAC is not valid");
		return -1;
	}

	mqnic->mac_count = count;
	for (k = 0; k < mqnic->mac_count; k++) {
		memcpy(mqnic->mac_list[k], mac, ETH_ALEN);
		mqnic->mac_list[k][ETH_ALEN - 1] += k;
	}

	return count;
}

static int read_mac_from_eeprom(struct mqnic_dev *mqnic,
		struct i2c_client *eeprom, int offset, char *mac)
{
	int ret;

	if (!eeprom) {
		dev_warn(mqnic->dev, "Failed to read MAC from EEPROM; no EEPROM I2C client registered");
		return -1;
	}

	ret = i2c_smbus_read_i2c_block_data(eeprom, offset, ETH_ALEN, mac);
	if (ret < 0) {
		dev_warn(mqnic->dev, "Failed to read MAC from EEPROM");
		return -1;
	}

	return 0;
}

static int init_mac_list_from_eeprom_base(struct mqnic_dev *mqnic,
		struct i2c_client *eeprom, int offset, int count)
{
	int ret;
	char mac[ETH_ALEN];

	ret = read_mac_from_eeprom(mqnic, eeprom, offset, mac);
	if (ret < 0)
		return ret;

	if (!is_valid_ether_addr(mac)) {
		dev_warn(mqnic->dev, "EEPROM does not contain a valid base MAC");
		return -1;
	}

	return init_mac_list_from_base_mac(mqnic, count, mac);
}

static int mqnic_generic_board_init(struct mqnic_dev *mqnic)
{
	struct i2c_adapter *adapter;
	struct i2c_client *mux;
	int ret = 0;

	mqnic->mod_i2c_client_count = 0;

	if (mqnic_i2c_init(mqnic)) {
		dev_err(mqnic->dev, "Failed to initialize I2C subsystem");
		return -1;
	}

	switch (mqnic->board_id) {
	case MQNIC_BOARD_ID_NETFPGA_SUME:
		// FPGA IC12
		//   TCA9548 IC31 0x74
		//     CH0: SFP1 IC3 0x50
		//     CH1: SFP2 IC5 0x50
		//     CH2: SFP3 IC6 0x50
		//     CH3: SFP4 IC8 0x50
		//     CH4: DDR3 IC27 0x51
		//          DDR3 IC28 0x52
		//          SI5324 IC20 0x68
		//     CH5: FMC
		//     CH6: PCON
		//     CH7: PMOD J11

		request_module("i2c_mux_pca954x");
		request_module("at24");

		// I2C adapter
		adapter = mqnic_i2c_adapter_create(mqnic, mqnic->hw_addr + MQNIC_REG_GPIO_I2C_0);

		// IC31 TCA9548 I2C MUX
		mux = create_i2c_client(adapter, "pca9548", 0x74, i2c_mux_props);

		// IC3 SFP1
		mqnic->mod_i2c_client[0] = create_i2c_client(get_i2c_mux_channel(mux, 0), "24c02", 0x50, NULL);

		// IC5 SFP2
		mqnic->mod_i2c_client[1] = create_i2c_client(get_i2c_mux_channel(mux, 1), "24c02", 0x50, NULL);

		// IC6 SFP3
		mqnic->mod_i2c_client[2] = create_i2c_client(get_i2c_mux_channel(mux, 2), "24c02", 0x50, NULL);

		// IC8 SFP4
		mqnic->mod_i2c_client[3] = create_i2c_client(get_i2c_mux_channel(mux, 3), "24c02", 0x50, NULL);

		mqnic->mod_i2c_client_count = 4;

		break;
	case MQNIC_BOARD_ID_VCU108:
		// FPGA U1
		//   TCA9548 U28 0x74
		//     CH0: SI570 Osc U32 0x5D
		//     CH1: TCA6416 Port Exp U89 0x21
		//     CH2: QSFP U145 0x50
		//     CH3: NC
		//     CH4: SI5328 U57 0x68
		//     CH5: HDMI U52 0x39
		//     CH6: SYSMON U1 0x32
		//     CH7: NC
		//   PCA9544 U80 0x75
		//     CH0: PMBUS
		//     CH1: FMC_HPC0 J22
		//     CH2: FMC_HPC1 J2
		//     CH3: M24C08 EEPROM U12 0x54

		request_module("i2c_mux_pca954x");
		request_module("at24");

		// I2C adapter
		adapter = mqnic_i2c_adapter_create(mqnic, mqnic->hw_addr + MQNIC_REG_GPIO_I2C_0);

		// U28 TCA9548 I2C MUX
		mux = create_i2c_client(adapter, "pca9548", 0x74, i2c_mux_props);

		// U145 QSFP
		mqnic->mod_i2c_client[0] = create_i2c_client(get_i2c_mux_channel(mux, 2), "24c02", 0x50, NULL);

		// U80 PCA9544 I2C MUX
		mux = create_i2c_client(adapter, "pca9544", 0x75, i2c_mux_props);

		// U12 I2C EEPROM
		mqnic->eeprom_i2c_client = create_i2c_client(get_i2c_mux_channel(mux, 3), "24c08", 0x54, NULL);

		mqnic->mod_i2c_client_count = 1;

		// read MACs from EEPROM
		init_mac_list_from_eeprom_base(mqnic, mqnic->eeprom_i2c_client, 0, MQNIC_MAX_IF);

		break;
	case MQNIC_BOARD_ID_VCU118:
		// FPGA U1
		//   TCA9548 U28 0x74
		//     CH0: SI570 Osc U32 0x5D
		//     CH1: NC
		//     CH2: QSFP1 U145 0x50
		//     CH3: QSFP2 U123 0x50
		//     CH4: SI5328 U57 0x68
		//     CH5: SI570 Osc U18 0x5D
		//     CH6: SYSMON U1 0x32
		//     CH7: FIREFLY J6 0x50
		//   TCA9548 U80 0x75
		//     CH0: PMBUS
		//     CH1: FMCP_HSPC J22
		//     CH2: FMC_HPC1 J2
		//     CH3: M24C08 EEPROM U12 0x54
		//     CH4: INA_PMBUS
		//     CH5: SI570 Osc U38 0x5D
		//     CH6: NC
		//     CH7: NC

		request_module("i2c_mux_pca954x");
		request_module("at24");

		// I2C adapter
		adapter = mqnic_i2c_adapter_create(mqnic, mqnic->hw_addr + MQNIC_REG_GPIO_I2C_0);

		// U28 TCA9548 I2C MUX
		mux = create_i2c_client(adapter, "pca9548", 0x74, i2c_mux_props);

		// U145 QSFP1
		mqnic->mod_i2c_client[0] = create_i2c_client(get_i2c_mux_channel(mux, 2), "24c02", 0x50, NULL);

		// U123 QSFP2
		mqnic->mod_i2c_client[1] = create_i2c_client(get_i2c_mux_channel(mux, 3), "24c02", 0x50, NULL);

		// U80 PCA9548 I2C MUX
		mux = create_i2c_client(adapter, "pca9548", 0x75, i2c_mux_props);

		// U12 I2C EEPROM
		mqnic->eeprom_i2c_client = create_i2c_client(get_i2c_mux_channel(mux, 3), "24c08", 0x54, NULL);

		mqnic->mod_i2c_client_count = 2;

		// read MACs from EEPROM
		init_mac_list_from_eeprom_base(mqnic, mqnic->eeprom_i2c_client, 0, MQNIC_MAX_IF);

		break;
	case MQNIC_BOARD_ID_VCU1525:
		// FPGA U13
		//   PCA9546 U28 0x74
		//     CH0: QSFP0 J7 0x50
		//     CH1: QSFP1 J9 0x50
		//     CH2: M24C08 EEPROM U62 0x54
		//          SI570 Osc U14 0x5D
		//     CH3: SYSMON U13 0x32

		request_module("i2c_mux_pca954x");
		request_module("at24");

		// I2C adapter
		adapter = mqnic_i2c_adapter_create(mqnic, mqnic->hw_addr + MQNIC_REG_GPIO_I2C_0);

		// U28 TCA9546 I2C MUX
		mux = create_i2c_client(adapter, "pca9546", 0x74, i2c_mux_props);

		// J7 QSFP0
		mqnic->mod_i2c_client[0] = create_i2c_client(get_i2c_mux_channel(mux, 0), "24c02", 0x50, NULL);

		// J9 QSFP1
		mqnic->mod_i2c_client[1] = create_i2c_client(get_i2c_mux_channel(mux, 1), "24c02", 0x50, NULL);

		// U12 I2C EEPROM
		mqnic->eeprom_i2c_client = create_i2c_client(get_i2c_mux_channel(mux, 2), "24c08", 0x54, NULL);

		mqnic->mod_i2c_client_count = 2;

		// read MACs from EEPROM
		init_mac_list_from_eeprom_base(mqnic, mqnic->eeprom_i2c_client, 0, MQNIC_MAX_IF);

		break;
	case MQNIC_BOARD_ID_ZCU106:
		// FPGA U1 / MSP430 U41 I2C0
		//   TCA6416 U61 0x21
		//   TCA6416 U97 0x20
		//   PCA9544 U60 0x75
		//     CH0: PS_PMBUS
		//     CH1: PL_PMBUS
		//     CH2: MAXIM_PMBUS
		//     CH3: SYSMON U1 0x32
		// FPGA U1 / MSP430 U41 I2C1
		//   TCA9548 U34 0x74
		//     CH0: M24C08 EEPROM U23 0x54
		//     CH1: SI5341 U69 0x36
		//     CH2: SI570 Osc U42 0x5D
		//     CH3: SI570 Osc U56 0x5D
		//     CH4: SI5328 U20 0x68
		//     CH5: NC
		//     CH6: NC
		//     CH7: NC
		//   TCA9548 U135 0x75
		//     CH0: FMC_HPC0 J5
		//     CH1: FMC_HPC1 J4
		//     CH2: SYSMON U1 0x32
		//     CH3: DDR4 SODIMM 0x51
		//     CH4: NC
		//     CH5: NC
		//     CH6: SFP1 P2 0x50
		//     CH7: SFP0 P1 0x50

		request_module("i2c_mux_pca954x");
		request_module("at24");

		// I2C adapter
		adapter = mqnic_i2c_adapter_create(mqnic, mqnic->hw_addr + MQNIC_REG_GPIO_I2C_0);

		// U34 TCA9548 I2C MUX
		mux = create_i2c_client(adapter, "pca9548", 0x74, i2c_mux_props);

		// U23 I2C EEPROM
		mqnic->eeprom_i2c_client = create_i2c_client(get_i2c_mux_channel(mux, 0), "24c08", 0x54, NULL);

		// U135 TCA9548 I2C MUX
		mux = create_i2c_client(adapter, "pca9548", 0x75, i2c_mux_props);

		// P1 SFP0
		mqnic->mod_i2c_client[0] = create_i2c_client(get_i2c_mux_channel(mux, 7), "24c02", 0x50, NULL);

		// P2 SFP1
		mqnic->mod_i2c_client[1] = create_i2c_client(get_i2c_mux_channel(mux, 6), "24c02", 0x50, NULL);

		mqnic->mod_i2c_client_count = 2;

		// read MACs from EEPROM
		init_mac_list_from_eeprom_base(mqnic, mqnic->eeprom_i2c_client, 0, MQNIC_MAX_IF);

		break;
	case MQNIC_BOARD_ID_EXANIC_X10:
	case MQNIC_BOARD_ID_EXANIC_X25:
	case MQNIC_BOARD_ID_ADM_PCIE_9V3:

		// create I2C adapter
		adapter = mqnic_i2c_adapter_create(mqnic, mqnic->hw_addr + MQNIC_REG_GPIO_I2C_1);

		// I2C EEPROM
		mqnic->eeprom_i2c_client = create_i2c_client(adapter, "24c02", 0x50, NULL);

		// read MACs from EEPROM
		init_mac_list_from_eeprom_base(mqnic, mqnic->eeprom_i2c_client, 0, MQNIC_MAX_IF);

		break;
	default:
		dev_warn(mqnic->dev, "Unknown board ID, not performing any board-specific init");
	}

	return ret;
}

static void mqnic_generic_board_deinit(struct mqnic_dev *mqnic)
{
	int k;

	// unregister I2C clients
	for (k = 0; k < ARRAY_SIZE(mqnic->mod_i2c_client); k++) {
		if (mqnic->mod_i2c_client[k]) {
			i2c_unregister_device(mqnic->mod_i2c_client[k]);
			mqnic->mod_i2c_client[k] = NULL;
		}
	}

	if (mqnic->eeprom_i2c_client) {
		i2c_unregister_device(mqnic->eeprom_i2c_client);
		mqnic->eeprom_i2c_client = NULL;
	}

	mqnic_i2c_deinit(mqnic);
}

static struct mqnic_board_ops generic_board_ops = {
	.init = mqnic_generic_board_init,
	.deinit = mqnic_generic_board_deinit
};

static u32 mqnic_alveo_bmc_reg_read(struct mqnic_dev *mqnic, u32 reg)
{
	iowrite32(reg, mqnic->hw_addr + 0x180);
	ioread32(mqnic->hw_addr + 0x184); // dummy read
	return ioread32(mqnic->hw_addr + 0x184);
}

static void mqnic_alveo_bmc_reg_write(struct mqnic_dev *mqnic, u32 reg, u32 val)
{
	iowrite32(reg, mqnic->hw_addr + 0x180);
	iowrite32(val, mqnic->hw_addr + 0x184);
	ioread32(mqnic->hw_addr + 0x184); // dummy read
}

static int mqnic_alveo_bmc_read_mac(struct mqnic_dev *mqnic, int index, char *mac)
{
	uint32_t reg = 0x0281a0 + index * 8;
	uint32_t val = mqnic_alveo_bmc_reg_read(mqnic, reg);
	mac[0] = (val >> 8) & 0xff;
	mac[1] = val & 0xff;
	val = mqnic_alveo_bmc_reg_read(mqnic, reg + 4);
	mac[2] = (val >> 24) & 0xff;
	mac[3] = (val >> 16) & 0xff;
	mac[4] = (val >> 8) & 0xff;
	mac[5] = val & 0xff;

	return 0;
}

static int mqnic_alveo_bmc_read_mac_list(struct mqnic_dev *mqnic, int count)
{
	int ret, k;
	char mac[ETH_ALEN];

	count = min(count, MQNIC_MAX_IF);

	mqnic->mac_count = 0;
	for (k = 0; k < count; k++) {
		ret = mqnic_alveo_bmc_read_mac(mqnic, k, mac);
		if (ret) {
			dev_warn(mqnic->dev, "Failed to read MAC from Alveo BMC");
			return -1;
		}

		if (is_valid_ether_addr(mac)) {
			memcpy(mqnic->mac_list[mqnic->mac_count], mac, ETH_ALEN);
			mqnic->mac_count++;
		}
	}

	dev_info(mqnic->dev, "Read %d MACs from Alveo BMC", mqnic->mac_count);

	if (mqnic->mac_count == 0)
		dev_warn(mqnic->dev, "Failed to read any valid MACs from Alveo BMC");

	return mqnic->mac_count;
}

static int mqnic_alveo_board_init(struct mqnic_dev *mqnic)
{
	struct i2c_adapter *adapter;
	struct i2c_client *mux;
	int ret = 0;

	mqnic->mod_i2c_client_count = 0;

	if (mqnic_i2c_init(mqnic)) {
		dev_err(mqnic->dev, "Failed to initialize I2C subsystem");
		return -1;
	}

	switch (mqnic->board_id) {
	case MQNIC_BOARD_ID_AU200:
	case MQNIC_BOARD_ID_AU250:
		// FPGA U13
		//   PCA9546 U28 0x74
		//     CH0: QSFP0 J7 0x50
		//     CH1: QSFP1 J9 0x50
		//     CH2: M24C08 EEPROM U62 0x54
		//          SI570 Osc U14 0x5D
		//     CH3: SYSMON U13 0x32

		request_module("i2c_mux_pca954x");
		request_module("at24");

		// I2C adapter
		adapter = mqnic_i2c_adapter_create(mqnic, mqnic->hw_addr + MQNIC_REG_GPIO_I2C_0);

		// U28 TCA9546 I2C MUX
		mux = create_i2c_client(adapter, "pca9546", 0x74, i2c_mux_props);

		// J7 QSFP0
		mqnic->mod_i2c_client[0] = create_i2c_client(get_i2c_mux_channel(mux, 0), "24c02", 0x50, NULL);

		// J9 QSFP1
		mqnic->mod_i2c_client[1] = create_i2c_client(get_i2c_mux_channel(mux, 1), "24c02", 0x50, NULL);

		// U12 I2C EEPROM
		mqnic->eeprom_i2c_client = create_i2c_client(get_i2c_mux_channel(mux, 2), "24c08", 0x54, NULL);

		mqnic->mod_i2c_client_count = 2;

		// falls through
	case MQNIC_BOARD_ID_AU50:
	case MQNIC_BOARD_ID_AU280:
		// init BMC

		if (mqnic_alveo_bmc_reg_read(mqnic, 0x020000) == 0 ||
		    mqnic_alveo_bmc_reg_read(mqnic, 0x028000) != 0x74736574) {
			dev_info(mqnic->dev, "Resetting Alveo CMS");

			mqnic_alveo_bmc_reg_write(mqnic, 0x020000, 0);
			mqnic_alveo_bmc_reg_write(mqnic, 0x020000, 1);
			msleep(100);
		}

		if (mqnic_alveo_bmc_reg_read(mqnic, 0x028000) != 0x74736574)
			dev_warn(mqnic->dev, "Alveo CMS not responding");
		else
			mqnic_alveo_bmc_read_mac_list(mqnic, 8);

		break;
	default:
		dev_warn(mqnic->dev, "Unknown Alveo board ID");
	}

	return ret;
}

static struct mqnic_board_ops alveo_board_ops = {
	.init = mqnic_alveo_board_init,
	.deinit = mqnic_generic_board_deinit
};

static int mqnic_gecko_bmc_read(struct mqnic_dev *mqnic)
{
	u32 val;
	int timeout = 200;

	while (1) {
		val = ioread32(mqnic->hw_addr + 0x188);
		if (val & BIT(19)) {
			if (val & BIT(18)) {
				// timed out
				dev_warn(mqnic->dev, "Timed out waiting for Gecko BMC response");
				msleep(10);
				return -2;
			}
			return val & 0xffff;
		} else {
			timeout--;
			if (timeout == 0) {
				dev_warn(mqnic->dev, "Timed out waiting for Gecko BMC interface");
				return -1;
			}
			msleep(1);
		}
	}

	return -1;
}

static int mqnic_gecko_bmc_write(struct mqnic_dev *mqnic, u16 cmd, u32 data)
{
	int ret;
	ret = mqnic_gecko_bmc_read(mqnic);

	if (ret == -1)
		return ret;

	iowrite32(data, mqnic->hw_addr + 0x180);
	iowrite32(cmd << 16, mqnic->hw_addr + 0x184);

	return 0;
}

static int mqnic_gecko_bmc_query(struct mqnic_dev *mqnic, u16 cmd, u32 data)
{
	int ret;

	ret = mqnic_gecko_bmc_write(mqnic, cmd, data);

	if (ret)
		return ret;

	return mqnic_gecko_bmc_read(mqnic);
}

static int mqnic_gecko_bmc_read_mac(struct mqnic_dev *mqnic, int index, char *mac)
{
	int i;

	for (i = 0; i < ETH_ALEN; i += 2) {
		u16 val = mqnic_gecko_bmc_query(mqnic, 0x2003, 0 + index * ETH_ALEN + i);
		if (val < 0)
			return val;
		mac[i] = val & 0xff;
		mac[i + 1] = (val >> 8) & 0xff;
	}

	return 0;
}

static int mqnic_gecko_bmc_read_mac_list(struct mqnic_dev *mqnic, int count)
{
	int ret, k;
	char mac[ETH_ALEN];

	count = min(count, MQNIC_MAX_IF);

	mqnic->mac_count = 0;
	for (k = 0; k < count; k++) {
		ret = mqnic_gecko_bmc_read_mac(mqnic, k, mac);
		if (ret) {
			dev_warn(mqnic->dev, "Failed to read MAC from Gecko BMC");
			return -1;
		}

		if (is_valid_ether_addr(mac)) {
			memcpy(mqnic->mac_list[mqnic->mac_count], mac, ETH_ALEN);
			mqnic->mac_count++;
		}
	}

	dev_info(mqnic->dev, "Read %d MACs from Gecko BMC", mqnic->mac_count);

	if (mqnic->mac_count == 0)
		dev_warn(mqnic->dev, "Failed to read any valid MACs from Gecko BMC");

	return mqnic->mac_count;
}

static int mqnic_gecko_board_init(struct mqnic_dev *mqnic)
{
	struct i2c_adapter *adapter;
	int ret = 0;

	mqnic->mod_i2c_client_count = 0;

	if (mqnic_i2c_init(mqnic)) {
		dev_err(mqnic->dev, "Failed to initialize I2C subsystem");
		return -1;
	}

	switch (mqnic->board_id) {
	case MQNIC_BOARD_ID_FB2CG_KU15P:
		// FPGA U1 I2C0
		//     QSFP0 J3 0x50
		// FPGA U1 I2C1
		//     QSFP1 J4 0x50

		request_module("at24");

		// I2C adapter
		adapter = mqnic_i2c_adapter_create(mqnic, mqnic->hw_addr + MQNIC_REG_GPIO_I2C_0);

		// QSFP0
		mqnic->mod_i2c_client[0] = create_i2c_client(adapter, "24c02", 0x50, NULL);

		// I2C adapter
		adapter = mqnic_i2c_adapter_create(mqnic, mqnic->hw_addr + MQNIC_REG_GPIO_I2C_1);

		// QSFP1
		mqnic->mod_i2c_client[1] = create_i2c_client(adapter, "24c02", 0x50, NULL);

		mqnic->mod_i2c_client_count = 2;

		// init BMC
		if (mqnic_gecko_bmc_query(mqnic, 0x7006, 0) <= 0) {
			dev_warn(mqnic->dev, "Gecko BMC not responding");
		} else {
			uint16_t v_l = mqnic_gecko_bmc_query(mqnic, 0x7005, 0);
			uint16_t v_h = mqnic_gecko_bmc_query(mqnic, 0x7006, 0);

			dev_info(mqnic->dev, "Gecko BMC version %d.%d.%d.%d",
			         (v_h >> 8) & 0xff, v_h & 0xff, (v_l >> 8) & 0xff, v_l & 0xff);

			mqnic_gecko_bmc_read_mac_list(mqnic, 8);
		}

		break;
	default:
		dev_warn(mqnic->dev, "Unknown board ID (Silicom Gecko BMC)");
	}

	return ret;
}

static struct mqnic_board_ops gecko_board_ops = {
	.init = mqnic_gecko_board_init,
	.deinit = mqnic_generic_board_deinit
};

int mqnic_board_init(struct mqnic_dev *mqnic)
{
	switch (mqnic->board_id) {
	case MQNIC_BOARD_ID_AU50:
	case MQNIC_BOARD_ID_AU200:
	case MQNIC_BOARD_ID_AU250:
	case MQNIC_BOARD_ID_AU280:
		mqnic->board_ops = &alveo_board_ops;
		break;
	case MQNIC_BOARD_ID_FB2CG_KU15P:
		mqnic->board_ops = &gecko_board_ops;
		break;
	default:
		mqnic->board_ops = &generic_board_ops;
	}

	if (!mqnic->board_ops)
		return -1;

	return mqnic->board_ops->init(mqnic);
}

void mqnic_board_deinit(struct mqnic_dev *mqnic)
{
	if (!mqnic->board_ops)
		return;

	mqnic->board_ops->deinit(mqnic);
}