corundum/rtl/eth_phy_10g.v

/*

Copyright (c) 2018 Alex Forencich

Permission is hereby granted, free of charge, to any person obtaining a copy
of this software and associated documentation files (the "Software"), to deal
in the Software without restriction, including without limitation the rights
to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
copies of the Software, and to permit persons to whom the Software is
furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in
all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
THE SOFTWARE.

*/

// Language: Verilog 2001

`resetall
`timescale 1ns / 1ps
`default_nettype none

/*
 * 10G Ethernet PHY
 */
module eth_phy_10g #
(
    parameter DATA_WIDTH = 64,
    parameter CTRL_WIDTH = (DATA_WIDTH/8),
    parameter HDR_WIDTH = 2,
    parameter BIT_REVERSE = 0,
    parameter SCRAMBLER_DISABLE = 0,
    parameter PRBS31_ENABLE = 0,
    parameter TX_SERDES_PIPELINE = 0,
    parameter RX_SERDES_PIPELINE = 0,
    parameter BITSLIP_HIGH_CYCLES = 1,
    parameter BITSLIP_LOW_CYCLES = 8,
    parameter COUNT_125US = 125000/6.4
)
(
    input  wire                  rx_clk,
    input  wire                  rx_rst,
    input  wire                  tx_clk,
    input  wire                  tx_rst,

    /*
     * XGMII interface
     */
    input  wire [DATA_WIDTH-1:0] xgmii_txd,
    input  wire [CTRL_WIDTH-1:0] xgmii_txc,
    output wire [DATA_WIDTH-1:0] xgmii_rxd,
    output wire [CTRL_WIDTH-1:0] xgmii_rxc,

    /*
     * SERDES interface
     */
    output wire [DATA_WIDTH-1:0] serdes_tx_data,
    output wire [HDR_WIDTH-1:0]  serdes_tx_hdr,
    input  wire [DATA_WIDTH-1:0] serdes_rx_data,
    input  wire [HDR_WIDTH-1:0]  serdes_rx_hdr,
    output wire                  serdes_rx_bitslip,
    output wire                  serdes_rx_reset_req,

    /*
     * Status
     */
    output wire                  tx_bad_block,
    output wire [6:0]            rx_error_count,
    output wire                  rx_bad_block,
    output wire                  rx_sequence_error,
    output wire                  rx_block_lock,
    output wire                  rx_high_ber,
    output wire                  rx_status,

    /*
     * Configuration
     */
    input  wire                  cfg_tx_prbs31_enable,
    input  wire                  cfg_rx_prbs31_enable
);

eth_phy_10g_rx #(
    .DATA_WIDTH(DATA_WIDTH),
    .CTRL_WIDTH(CTRL_WIDTH),
    .HDR_WIDTH(HDR_WIDTH),
    .BIT_REVERSE(BIT_REVERSE),
    .SCRAMBLER_DISABLE(SCRAMBLER_DISABLE),
    .PRBS31_ENABLE(PRBS31_ENABLE),
    .SERDES_PIPELINE(RX_SERDES_PIPELINE),
    .BITSLIP_HIGH_CYCLES(BITSLIP_HIGH_CYCLES),
    .BITSLIP_LOW_CYCLES(BITSLIP_LOW_CYCLES),
    .COUNT_125US(COUNT_125US)
)
eth_phy_10g_rx_inst (
    .clk(rx_clk),
    .rst(rx_rst),
    .xgmii_rxd(xgmii_rxd),
    .xgmii_rxc(xgmii_rxc),
    .serdes_rx_data(serdes_rx_data),
    .serdes_rx_hdr(serdes_rx_hdr),
    .serdes_rx_bitslip(serdes_rx_bitslip),
    .serdes_rx_reset_req(serdes_rx_reset_req),
    .rx_error_count(rx_error_count),
    .rx_bad_block(rx_bad_block),
    .rx_sequence_error(rx_sequence_error),
    .rx_block_lock(rx_block_lock),
    .rx_high_ber(rx_high_ber),
    .rx_status(rx_status),
    .cfg_rx_prbs31_enable(cfg_rx_prbs31_enable)
);

eth_phy_10g_tx #(
    .DATA_WIDTH(DATA_WIDTH),
    .CTRL_WIDTH(CTRL_WIDTH),
    .HDR_WIDTH(HDR_WIDTH),
    .BIT_REVERSE(BIT_REVERSE),
    .SCRAMBLER_DISABLE(SCRAMBLER_DISABLE),
    .PRBS31_ENABLE(PRBS31_ENABLE),
    .SERDES_PIPELINE(TX_SERDES_PIPELINE)
)
eth_phy_10g_tx_inst (
    .clk(tx_clk),
    .rst(tx_rst),
    .xgmii_txd(xgmii_txd),
    .xgmii_txc(xgmii_txc),
    .serdes_tx_data(serdes_tx_data),
    .serdes_tx_hdr(serdes_tx_hdr),
    .tx_bad_block(tx_bad_block),
    .cfg_tx_prbs31_enable(cfg_tx_prbs31_enable)
);

endmodule

`resetall