diff --git a/fpga/mqnic/AU200/fpga_100g/fpga/Makefile b/fpga/mqnic/AU200/fpga_100g/fpga/Makefile
index a80cf8124..dfb1a0463 100644
--- a/fpga/mqnic/AU200/fpga_100g/fpga/Makefile
+++ b/fpga/mqnic/AU200/fpga_100g/fpga/Makefile
@@ -77,3 +77,40 @@ program: $(FPGA_TOP).bit
 	echo "exit" >> program.tcl
 	vivado -nojournal -nolog -mode batch -source program.tcl
 
+%.mcs %.prm: %.bit
+	echo "write_cfgmem -force -format mcs -size 128 -interface SPIx4 -loadbit {up 0x01002000 $*.bit} -checksum -file $*.mcs" > generate_mcs.tcl
+	echo "exit" >> generate_mcs.tcl
+	vivado -nojournal -nolog -mode batch -source generate_mcs.tcl
+	mkdir -p rev
+	COUNT=100; \
+	while [ -e rev/$*_rev$$COUNT.bit ]; \
+	do COUNT=$$((COUNT+1)); done; \
+	COUNT=$$((COUNT-1)); \
+	for x in .mcs .prm; \
+	do cp $*$$x rev/$*_rev$$COUNT$$x; \
+	echo "Output: rev/$*_rev$$COUNT$$x"; done;
+
+flash: $(FPGA_TOP).mcs $(FPGA_TOP).prm
+	echo "open_hw" > flash.tcl
+	echo "connect_hw_server" >> flash.tcl
+	echo "open_hw_target" >> flash.tcl
+	echo "current_hw_device [lindex [get_hw_devices] 0]" >> flash.tcl
+	echo "refresh_hw_device -update_hw_probes false [current_hw_device]" >> flash.tcl
+	echo "create_hw_cfgmem -hw_device [current_hw_device] [lindex [get_cfgmem_parts {mt25qu01g-spi-x1_x2_x4}] 0]" >> flash.tcl
+	echo "current_hw_cfgmem -hw_device [current_hw_device] [get_property PROGRAM.HW_CFGMEM [current_hw_device]]" >> flash.tcl
+	echo "set_property PROGRAM.FILES [list \"$(FPGA_TOP).mcs\"] [current_hw_cfgmem]" >> flash.tcl
+	echo "set_property PROGRAM.PRM_FILES [list \"$(FPGA_TOP).prm\"] [current_hw_cfgmem]" >> flash.tcl
+	echo "set_property PROGRAM.ERASE 1 [current_hw_cfgmem]" >> flash.tcl
+	echo "set_property PROGRAM.CFG_PROGRAM 1 [current_hw_cfgmem]" >> flash.tcl
+	echo "set_property PROGRAM.VERIFY 1 [current_hw_cfgmem]" >> flash.tcl
+	echo "set_property PROGRAM.CHECKSUM 0 [current_hw_cfgmem]" >> flash.tcl
+	echo "set_property PROGRAM.ADDRESS_RANGE {use_file} [current_hw_cfgmem]" >> flash.tcl
+	echo "set_property PROGRAM.UNUSED_PIN_TERMINATION {pull-none} [current_hw_cfgmem]" >> flash.tcl
+	echo "create_hw_bitstream -hw_device [current_hw_device] [get_property PROGRAM.HW_CFGMEM_BITFILE [current_hw_device]]" >> flash.tcl
+	echo "program_hw_devices [current_hw_device]" >> flash.tcl
+	echo "refresh_hw_device [current_hw_device]" >> flash.tcl
+	echo "program_hw_cfgmem -hw_cfgmem [current_hw_cfgmem]" >> flash.tcl
+	echo "boot_hw_device [current_hw_device]" >> flash.tcl
+	echo "exit" >> flash.tcl
+	vivado -nojournal -nolog -mode batch -source flash.tcl
+
diff --git a/fpga/mqnic/AU200/fpga_10g/fpga/Makefile b/fpga/mqnic/AU200/fpga_10g/fpga/Makefile
index bccf5502e..733c71f29 100644
--- a/fpga/mqnic/AU200/fpga_10g/fpga/Makefile
+++ b/fpga/mqnic/AU200/fpga_10g/fpga/Makefile
@@ -92,3 +92,40 @@ program: $(FPGA_TOP).bit
 	echo "exit" >> program.tcl
 	vivado -nojournal -nolog -mode batch -source program.tcl
 
+%.mcs %.prm: %.bit
+	echo "write_cfgmem -force -format mcs -size 128 -interface SPIx4 -loadbit {up 0x01002000 $*.bit} -checksum -file $*.mcs" > generate_mcs.tcl
+	echo "exit" >> generate_mcs.tcl
+	vivado -nojournal -nolog -mode batch -source generate_mcs.tcl
+	mkdir -p rev
+	COUNT=100; \
+	while [ -e rev/$*_rev$$COUNT.bit ]; \
+	do COUNT=$$((COUNT+1)); done; \
+	COUNT=$$((COUNT-1)); \
+	for x in .mcs .prm; \
+	do cp $*$$x rev/$*_rev$$COUNT$$x; \
+	echo "Output: rev/$*_rev$$COUNT$$x"; done;
+
+flash: $(FPGA_TOP).mcs $(FPGA_TOP).prm
+	echo "open_hw" > flash.tcl
+	echo "connect_hw_server" >> flash.tcl
+	echo "open_hw_target" >> flash.tcl
+	echo "current_hw_device [lindex [get_hw_devices] 0]" >> flash.tcl
+	echo "refresh_hw_device -update_hw_probes false [current_hw_device]" >> flash.tcl
+	echo "create_hw_cfgmem -hw_device [current_hw_device] [lindex [get_cfgmem_parts {mt25qu01g-spi-x1_x2_x4}] 0]" >> flash.tcl
+	echo "current_hw_cfgmem -hw_device [current_hw_device] [get_property PROGRAM.HW_CFGMEM [current_hw_device]]" >> flash.tcl
+	echo "set_property PROGRAM.FILES [list \"$(FPGA_TOP).mcs\"] [current_hw_cfgmem]" >> flash.tcl
+	echo "set_property PROGRAM.PRM_FILES [list \"$(FPGA_TOP).prm\"] [current_hw_cfgmem]" >> flash.tcl
+	echo "set_property PROGRAM.ERASE 1 [current_hw_cfgmem]" >> flash.tcl
+	echo "set_property PROGRAM.CFG_PROGRAM 1 [current_hw_cfgmem]" >> flash.tcl
+	echo "set_property PROGRAM.VERIFY 1 [current_hw_cfgmem]" >> flash.tcl
+	echo "set_property PROGRAM.CHECKSUM 0 [current_hw_cfgmem]" >> flash.tcl
+	echo "set_property PROGRAM.ADDRESS_RANGE {use_file} [current_hw_cfgmem]" >> flash.tcl
+	echo "set_property PROGRAM.UNUSED_PIN_TERMINATION {pull-none} [current_hw_cfgmem]" >> flash.tcl
+	echo "create_hw_bitstream -hw_device [current_hw_device] [get_property PROGRAM.HW_CFGMEM_BITFILE [current_hw_device]]" >> flash.tcl
+	echo "program_hw_devices [current_hw_device]" >> flash.tcl
+	echo "refresh_hw_device [current_hw_device]" >> flash.tcl
+	echo "program_hw_cfgmem -hw_cfgmem [current_hw_cfgmem]" >> flash.tcl
+	echo "boot_hw_device [current_hw_device]" >> flash.tcl
+	echo "exit" >> flash.tcl
+	vivado -nojournal -nolog -mode batch -source flash.tcl
+
diff --git a/fpga/mqnic/AU250/fpga_100g/fpga/Makefile b/fpga/mqnic/AU250/fpga_100g/fpga/Makefile
index 0cd56c70d..cf1a51f9d 100644
--- a/fpga/mqnic/AU250/fpga_100g/fpga/Makefile
+++ b/fpga/mqnic/AU250/fpga_100g/fpga/Makefile
@@ -77,3 +77,40 @@ program: $(FPGA_TOP).bit
 	echo "exit" >> program.tcl
 	vivado -nojournal -nolog -mode batch -source program.tcl
 
+%.mcs %.prm: %.bit
+	echo "write_cfgmem -force -format mcs -size 128 -interface SPIx4 -loadbit {up 0x01002000 $*.bit} -checksum -file $*.mcs" > generate_mcs.tcl
+	echo "exit" >> generate_mcs.tcl
+	vivado -nojournal -nolog -mode batch -source generate_mcs.tcl
+	mkdir -p rev
+	COUNT=100; \
+	while [ -e rev/$*_rev$$COUNT.bit ]; \
+	do COUNT=$$((COUNT+1)); done; \
+	COUNT=$$((COUNT-1)); \
+	for x in .mcs .prm; \
+	do cp $*$$x rev/$*_rev$$COUNT$$x; \
+	echo "Output: rev/$*_rev$$COUNT$$x"; done;
+
+flash: $(FPGA_TOP).mcs $(FPGA_TOP).prm
+	echo "open_hw" > flash.tcl
+	echo "connect_hw_server" >> flash.tcl
+	echo "open_hw_target" >> flash.tcl
+	echo "current_hw_device [lindex [get_hw_devices] 0]" >> flash.tcl
+	echo "refresh_hw_device -update_hw_probes false [current_hw_device]" >> flash.tcl
+	echo "create_hw_cfgmem -hw_device [current_hw_device] [lindex [get_cfgmem_parts {mt25qu01g-spi-x1_x2_x4}] 0]" >> flash.tcl
+	echo "current_hw_cfgmem -hw_device [current_hw_device] [get_property PROGRAM.HW_CFGMEM [current_hw_device]]" >> flash.tcl
+	echo "set_property PROGRAM.FILES [list \"$(FPGA_TOP).mcs\"] [current_hw_cfgmem]" >> flash.tcl
+	echo "set_property PROGRAM.PRM_FILES [list \"$(FPGA_TOP).prm\"] [current_hw_cfgmem]" >> flash.tcl
+	echo "set_property PROGRAM.ERASE 1 [current_hw_cfgmem]" >> flash.tcl
+	echo "set_property PROGRAM.CFG_PROGRAM 1 [current_hw_cfgmem]" >> flash.tcl
+	echo "set_property PROGRAM.VERIFY 1 [current_hw_cfgmem]" >> flash.tcl
+	echo "set_property PROGRAM.CHECKSUM 0 [current_hw_cfgmem]" >> flash.tcl
+	echo "set_property PROGRAM.ADDRESS_RANGE {use_file} [current_hw_cfgmem]" >> flash.tcl
+	echo "set_property PROGRAM.UNUSED_PIN_TERMINATION {pull-none} [current_hw_cfgmem]" >> flash.tcl
+	echo "create_hw_bitstream -hw_device [current_hw_device] [get_property PROGRAM.HW_CFGMEM_BITFILE [current_hw_device]]" >> flash.tcl
+	echo "program_hw_devices [current_hw_device]" >> flash.tcl
+	echo "refresh_hw_device [current_hw_device]" >> flash.tcl
+	echo "program_hw_cfgmem -hw_cfgmem [current_hw_cfgmem]" >> flash.tcl
+	echo "boot_hw_device [current_hw_device]" >> flash.tcl
+	echo "exit" >> flash.tcl
+	vivado -nojournal -nolog -mode batch -source flash.tcl
+
diff --git a/fpga/mqnic/AU250/fpga_10g/fpga/Makefile b/fpga/mqnic/AU250/fpga_10g/fpga/Makefile
index e6a54e514..70f933633 100644
--- a/fpga/mqnic/AU250/fpga_10g/fpga/Makefile
+++ b/fpga/mqnic/AU250/fpga_10g/fpga/Makefile
@@ -92,3 +92,40 @@ program: $(FPGA_TOP).bit
 	echo "exit" >> program.tcl
 	vivado -nojournal -nolog -mode batch -source program.tcl
 
+%.mcs %.prm: %.bit
+	echo "write_cfgmem -force -format mcs -size 128 -interface SPIx4 -loadbit {up 0x01002000 $*.bit} -checksum -file $*.mcs" > generate_mcs.tcl
+	echo "exit" >> generate_mcs.tcl
+	vivado -nojournal -nolog -mode batch -source generate_mcs.tcl
+	mkdir -p rev
+	COUNT=100; \
+	while [ -e rev/$*_rev$$COUNT.bit ]; \
+	do COUNT=$$((COUNT+1)); done; \
+	COUNT=$$((COUNT-1)); \
+	for x in .mcs .prm; \
+	do cp $*$$x rev/$*_rev$$COUNT$$x; \
+	echo "Output: rev/$*_rev$$COUNT$$x"; done;
+
+flash: $(FPGA_TOP).mcs $(FPGA_TOP).prm
+	echo "open_hw" > flash.tcl
+	echo "connect_hw_server" >> flash.tcl
+	echo "open_hw_target" >> flash.tcl
+	echo "current_hw_device [lindex [get_hw_devices] 0]" >> flash.tcl
+	echo "refresh_hw_device -update_hw_probes false [current_hw_device]" >> flash.tcl
+	echo "create_hw_cfgmem -hw_device [current_hw_device] [lindex [get_cfgmem_parts {mt25qu01g-spi-x1_x2_x4}] 0]" >> flash.tcl
+	echo "current_hw_cfgmem -hw_device [current_hw_device] [get_property PROGRAM.HW_CFGMEM [current_hw_device]]" >> flash.tcl
+	echo "set_property PROGRAM.FILES [list \"$(FPGA_TOP).mcs\"] [current_hw_cfgmem]" >> flash.tcl
+	echo "set_property PROGRAM.PRM_FILES [list \"$(FPGA_TOP).prm\"] [current_hw_cfgmem]" >> flash.tcl
+	echo "set_property PROGRAM.ERASE 1 [current_hw_cfgmem]" >> flash.tcl
+	echo "set_property PROGRAM.CFG_PROGRAM 1 [current_hw_cfgmem]" >> flash.tcl
+	echo "set_property PROGRAM.VERIFY 1 [current_hw_cfgmem]" >> flash.tcl
+	echo "set_property PROGRAM.CHECKSUM 0 [current_hw_cfgmem]" >> flash.tcl
+	echo "set_property PROGRAM.ADDRESS_RANGE {use_file} [current_hw_cfgmem]" >> flash.tcl
+	echo "set_property PROGRAM.UNUSED_PIN_TERMINATION {pull-none} [current_hw_cfgmem]" >> flash.tcl
+	echo "create_hw_bitstream -hw_device [current_hw_device] [get_property PROGRAM.HW_CFGMEM_BITFILE [current_hw_device]]" >> flash.tcl
+	echo "program_hw_devices [current_hw_device]" >> flash.tcl
+	echo "refresh_hw_device [current_hw_device]" >> flash.tcl
+	echo "program_hw_cfgmem -hw_cfgmem [current_hw_cfgmem]" >> flash.tcl
+	echo "boot_hw_device [current_hw_device]" >> flash.tcl
+	echo "exit" >> flash.tcl
+	vivado -nojournal -nolog -mode batch -source flash.tcl
+
diff --git a/fpga/mqnic/AU280/fpga_100g/fpga/Makefile b/fpga/mqnic/AU280/fpga_100g/fpga/Makefile
index 272fa660f..f184f4ad8 100644
--- a/fpga/mqnic/AU280/fpga_100g/fpga/Makefile
+++ b/fpga/mqnic/AU280/fpga_100g/fpga/Makefile
@@ -77,3 +77,40 @@ program: $(FPGA_TOP).bit
 	echo "exit" >> program.tcl
 	vivado -nojournal -nolog -mode batch -source program.tcl
 
+%.mcs %.prm: %.bit
+	echo "write_cfgmem -force -format mcs -size 128 -interface SPIx4 -loadbit {up 0x01002000 $*.bit} -checksum -file $*.mcs" > generate_mcs.tcl
+	echo "exit" >> generate_mcs.tcl
+	vivado -nojournal -nolog -mode batch -source generate_mcs.tcl
+	mkdir -p rev
+	COUNT=100; \
+	while [ -e rev/$*_rev$$COUNT.bit ]; \
+	do COUNT=$$((COUNT+1)); done; \
+	COUNT=$$((COUNT-1)); \
+	for x in .mcs .prm; \
+	do cp $*$$x rev/$*_rev$$COUNT$$x; \
+	echo "Output: rev/$*_rev$$COUNT$$x"; done;
+
+flash: $(FPGA_TOP).mcs $(FPGA_TOP).prm
+	echo "open_hw" > flash.tcl
+	echo "connect_hw_server" >> flash.tcl
+	echo "open_hw_target" >> flash.tcl
+	echo "current_hw_device [lindex [get_hw_devices] 0]" >> flash.tcl
+	echo "refresh_hw_device -update_hw_probes false [current_hw_device]" >> flash.tcl
+	echo "create_hw_cfgmem -hw_device [current_hw_device] [lindex [get_cfgmem_parts {mt25qu01g-spi-x1_x2_x4}] 0]" >> flash.tcl
+	echo "current_hw_cfgmem -hw_device [current_hw_device] [get_property PROGRAM.HW_CFGMEM [current_hw_device]]" >> flash.tcl
+	echo "set_property PROGRAM.FILES [list \"$(FPGA_TOP).mcs\"] [current_hw_cfgmem]" >> flash.tcl
+	echo "set_property PROGRAM.PRM_FILES [list \"$(FPGA_TOP).prm\"] [current_hw_cfgmem]" >> flash.tcl
+	echo "set_property PROGRAM.ERASE 1 [current_hw_cfgmem]" >> flash.tcl
+	echo "set_property PROGRAM.CFG_PROGRAM 1 [current_hw_cfgmem]" >> flash.tcl
+	echo "set_property PROGRAM.VERIFY 1 [current_hw_cfgmem]" >> flash.tcl
+	echo "set_property PROGRAM.CHECKSUM 0 [current_hw_cfgmem]" >> flash.tcl
+	echo "set_property PROGRAM.ADDRESS_RANGE {use_file} [current_hw_cfgmem]" >> flash.tcl
+	echo "set_property PROGRAM.UNUSED_PIN_TERMINATION {pull-none} [current_hw_cfgmem]" >> flash.tcl
+	echo "create_hw_bitstream -hw_device [current_hw_device] [get_property PROGRAM.HW_CFGMEM_BITFILE [current_hw_device]]" >> flash.tcl
+	echo "program_hw_devices [current_hw_device]" >> flash.tcl
+	echo "refresh_hw_device [current_hw_device]" >> flash.tcl
+	echo "program_hw_cfgmem -hw_cfgmem [current_hw_cfgmem]" >> flash.tcl
+	echo "boot_hw_device [current_hw_device]" >> flash.tcl
+	echo "exit" >> flash.tcl
+	vivado -nojournal -nolog -mode batch -source flash.tcl
+
diff --git a/fpga/mqnic/AU280/fpga_10g/fpga/Makefile b/fpga/mqnic/AU280/fpga_10g/fpga/Makefile
index e87ef5e00..7234f6205 100644
--- a/fpga/mqnic/AU280/fpga_10g/fpga/Makefile
+++ b/fpga/mqnic/AU280/fpga_10g/fpga/Makefile
@@ -91,3 +91,40 @@ program: $(FPGA_TOP).bit
 	echo "exit" >> program.tcl
 	vivado -nojournal -nolog -mode batch -source program.tcl
 
+%.mcs %.prm: %.bit
+	echo "write_cfgmem -force -format mcs -size 128 -interface SPIx4 -loadbit {up 0x01002000 $*.bit} -checksum -file $*.mcs" > generate_mcs.tcl
+	echo "exit" >> generate_mcs.tcl
+	vivado -nojournal -nolog -mode batch -source generate_mcs.tcl
+	mkdir -p rev
+	COUNT=100; \
+	while [ -e rev/$*_rev$$COUNT.bit ]; \
+	do COUNT=$$((COUNT+1)); done; \
+	COUNT=$$((COUNT-1)); \
+	for x in .mcs .prm; \
+	do cp $*$$x rev/$*_rev$$COUNT$$x; \
+	echo "Output: rev/$*_rev$$COUNT$$x"; done;
+
+flash: $(FPGA_TOP).mcs $(FPGA_TOP).prm
+	echo "open_hw" > flash.tcl
+	echo "connect_hw_server" >> flash.tcl
+	echo "open_hw_target" >> flash.tcl
+	echo "current_hw_device [lindex [get_hw_devices] 0]" >> flash.tcl
+	echo "refresh_hw_device -update_hw_probes false [current_hw_device]" >> flash.tcl
+	echo "create_hw_cfgmem -hw_device [current_hw_device] [lindex [get_cfgmem_parts {mt25qu01g-spi-x1_x2_x4}] 0]" >> flash.tcl
+	echo "current_hw_cfgmem -hw_device [current_hw_device] [get_property PROGRAM.HW_CFGMEM [current_hw_device]]" >> flash.tcl
+	echo "set_property PROGRAM.FILES [list \"$(FPGA_TOP).mcs\"] [current_hw_cfgmem]" >> flash.tcl
+	echo "set_property PROGRAM.PRM_FILES [list \"$(FPGA_TOP).prm\"] [current_hw_cfgmem]" >> flash.tcl
+	echo "set_property PROGRAM.ERASE 1 [current_hw_cfgmem]" >> flash.tcl
+	echo "set_property PROGRAM.CFG_PROGRAM 1 [current_hw_cfgmem]" >> flash.tcl
+	echo "set_property PROGRAM.VERIFY 1 [current_hw_cfgmem]" >> flash.tcl
+	echo "set_property PROGRAM.CHECKSUM 0 [current_hw_cfgmem]" >> flash.tcl
+	echo "set_property PROGRAM.ADDRESS_RANGE {use_file} [current_hw_cfgmem]" >> flash.tcl
+	echo "set_property PROGRAM.UNUSED_PIN_TERMINATION {pull-none} [current_hw_cfgmem]" >> flash.tcl
+	echo "create_hw_bitstream -hw_device [current_hw_device] [get_property PROGRAM.HW_CFGMEM_BITFILE [current_hw_device]]" >> flash.tcl
+	echo "program_hw_devices [current_hw_device]" >> flash.tcl
+	echo "refresh_hw_device [current_hw_device]" >> flash.tcl
+	echo "program_hw_cfgmem -hw_cfgmem [current_hw_cfgmem]" >> flash.tcl
+	echo "boot_hw_device [current_hw_device]" >> flash.tcl
+	echo "exit" >> flash.tcl
+	vivado -nojournal -nolog -mode batch -source flash.tcl
+
diff --git a/fpga/mqnic/AU50/fpga_100g/fpga/Makefile b/fpga/mqnic/AU50/fpga_100g/fpga/Makefile
index 09e7d938e..76278b6a2 100644
--- a/fpga/mqnic/AU50/fpga_100g/fpga/Makefile
+++ b/fpga/mqnic/AU50/fpga_100g/fpga/Makefile
@@ -76,3 +76,40 @@ program: $(FPGA_TOP).bit
 	echo "exit" >> program.tcl
 	vivado -nojournal -nolog -mode batch -source program.tcl
 
+%.mcs %.prm: %.bit
+	echo "write_cfgmem -force -format mcs -size 128 -interface SPIx4 -loadbit {up 0x01002000 $*.bit} -checksum -file $*.mcs" > generate_mcs.tcl
+	echo "exit" >> generate_mcs.tcl
+	vivado -nojournal -nolog -mode batch -source generate_mcs.tcl
+	mkdir -p rev
+	COUNT=100; \
+	while [ -e rev/$*_rev$$COUNT.bit ]; \
+	do COUNT=$$((COUNT+1)); done; \
+	COUNT=$$((COUNT-1)); \
+	for x in .mcs .prm; \
+	do cp $*$$x rev/$*_rev$$COUNT$$x; \
+	echo "Output: rev/$*_rev$$COUNT$$x"; done;
+
+flash: $(FPGA_TOP).mcs $(FPGA_TOP).prm
+	echo "open_hw" > flash.tcl
+	echo "connect_hw_server" >> flash.tcl
+	echo "open_hw_target" >> flash.tcl
+	echo "current_hw_device [lindex [get_hw_devices] 0]" >> flash.tcl
+	echo "refresh_hw_device -update_hw_probes false [current_hw_device]" >> flash.tcl
+	echo "create_hw_cfgmem -hw_device [current_hw_device] [lindex [get_cfgmem_parts {mt25qu01g-spi-x1_x2_x4}] 0]" >> flash.tcl
+	echo "current_hw_cfgmem -hw_device [current_hw_device] [get_property PROGRAM.HW_CFGMEM [current_hw_device]]" >> flash.tcl
+	echo "set_property PROGRAM.FILES [list \"$(FPGA_TOP).mcs\"] [current_hw_cfgmem]" >> flash.tcl
+	echo "set_property PROGRAM.PRM_FILES [list \"$(FPGA_TOP).prm\"] [current_hw_cfgmem]" >> flash.tcl
+	echo "set_property PROGRAM.ERASE 1 [current_hw_cfgmem]" >> flash.tcl
+	echo "set_property PROGRAM.CFG_PROGRAM 1 [current_hw_cfgmem]" >> flash.tcl
+	echo "set_property PROGRAM.VERIFY 1 [current_hw_cfgmem]" >> flash.tcl
+	echo "set_property PROGRAM.CHECKSUM 0 [current_hw_cfgmem]" >> flash.tcl
+	echo "set_property PROGRAM.ADDRESS_RANGE {use_file} [current_hw_cfgmem]" >> flash.tcl
+	echo "set_property PROGRAM.UNUSED_PIN_TERMINATION {pull-none} [current_hw_cfgmem]" >> flash.tcl
+	echo "create_hw_bitstream -hw_device [current_hw_device] [get_property PROGRAM.HW_CFGMEM_BITFILE [current_hw_device]]" >> flash.tcl
+	echo "program_hw_devices [current_hw_device]" >> flash.tcl
+	echo "refresh_hw_device [current_hw_device]" >> flash.tcl
+	echo "program_hw_cfgmem -hw_cfgmem [current_hw_cfgmem]" >> flash.tcl
+	echo "boot_hw_device [current_hw_device]" >> flash.tcl
+	echo "exit" >> flash.tcl
+	vivado -nojournal -nolog -mode batch -source flash.tcl
+
diff --git a/fpga/mqnic/AU50/fpga_10g/fpga/Makefile b/fpga/mqnic/AU50/fpga_10g/fpga/Makefile
index d4f2bd849..8723ded6b 100644
--- a/fpga/mqnic/AU50/fpga_10g/fpga/Makefile
+++ b/fpga/mqnic/AU50/fpga_10g/fpga/Makefile
@@ -91,3 +91,40 @@ program: $(FPGA_TOP).bit
 	echo "exit" >> program.tcl
 	vivado -nojournal -nolog -mode batch -source program.tcl
 
+%.mcs %.prm: %.bit
+	echo "write_cfgmem -force -format mcs -size 128 -interface SPIx4 -loadbit {up 0x01002000 $*.bit} -checksum -file $*.mcs" > generate_mcs.tcl
+	echo "exit" >> generate_mcs.tcl
+	vivado -nojournal -nolog -mode batch -source generate_mcs.tcl
+	mkdir -p rev
+	COUNT=100; \
+	while [ -e rev/$*_rev$$COUNT.bit ]; \
+	do COUNT=$$((COUNT+1)); done; \
+	COUNT=$$((COUNT-1)); \
+	for x in .mcs .prm; \
+	do cp $*$$x rev/$*_rev$$COUNT$$x; \
+	echo "Output: rev/$*_rev$$COUNT$$x"; done;
+
+flash: $(FPGA_TOP).mcs $(FPGA_TOP).prm
+	echo "open_hw" > flash.tcl
+	echo "connect_hw_server" >> flash.tcl
+	echo "open_hw_target" >> flash.tcl
+	echo "current_hw_device [lindex [get_hw_devices] 0]" >> flash.tcl
+	echo "refresh_hw_device -update_hw_probes false [current_hw_device]" >> flash.tcl
+	echo "create_hw_cfgmem -hw_device [current_hw_device] [lindex [get_cfgmem_parts {mt25qu01g-spi-x1_x2_x4}] 0]" >> flash.tcl
+	echo "current_hw_cfgmem -hw_device [current_hw_device] [get_property PROGRAM.HW_CFGMEM [current_hw_device]]" >> flash.tcl
+	echo "set_property PROGRAM.FILES [list \"$(FPGA_TOP).mcs\"] [current_hw_cfgmem]" >> flash.tcl
+	echo "set_property PROGRAM.PRM_FILES [list \"$(FPGA_TOP).prm\"] [current_hw_cfgmem]" >> flash.tcl
+	echo "set_property PROGRAM.ERASE 1 [current_hw_cfgmem]" >> flash.tcl
+	echo "set_property PROGRAM.CFG_PROGRAM 1 [current_hw_cfgmem]" >> flash.tcl
+	echo "set_property PROGRAM.VERIFY 1 [current_hw_cfgmem]" >> flash.tcl
+	echo "set_property PROGRAM.CHECKSUM 0 [current_hw_cfgmem]" >> flash.tcl
+	echo "set_property PROGRAM.ADDRESS_RANGE {use_file} [current_hw_cfgmem]" >> flash.tcl
+	echo "set_property PROGRAM.UNUSED_PIN_TERMINATION {pull-none} [current_hw_cfgmem]" >> flash.tcl
+	echo "create_hw_bitstream -hw_device [current_hw_device] [get_property PROGRAM.HW_CFGMEM_BITFILE [current_hw_device]]" >> flash.tcl
+	echo "program_hw_devices [current_hw_device]" >> flash.tcl
+	echo "refresh_hw_device [current_hw_device]" >> flash.tcl
+	echo "program_hw_cfgmem -hw_cfgmem [current_hw_cfgmem]" >> flash.tcl
+	echo "boot_hw_device [current_hw_device]" >> flash.tcl
+	echo "exit" >> flash.tcl
+	vivado -nojournal -nolog -mode batch -source flash.tcl
+
diff --git a/fpga/mqnic/VCU1525/fpga_100g/fpga/Makefile b/fpga/mqnic/VCU1525/fpga_100g/fpga/Makefile
index bae63b12d..86ff380c3 100644
--- a/fpga/mqnic/VCU1525/fpga_100g/fpga/Makefile
+++ b/fpga/mqnic/VCU1525/fpga_100g/fpga/Makefile
@@ -77,8 +77,8 @@ program: $(FPGA_TOP).bit
 	echo "exit" >> program.tcl
 	vivado -nojournal -nolog -mode batch -source program.tcl
 
-%_primary.mcs %_secondary.mcs %_primary.prm %_secondary.prm: %.bit
-	echo "write_cfgmem -force -format mcs -size 256 -interface SPIx8 -loadbit {up 0x0000000 $*.bit} -checksum -file $*.mcs" > generate_mcs.tcl
+%.mcs %.prm: %.bit
+	echo "write_cfgmem -force -format mcs -size 128 -interface SPIx4 -loadbit {up 0x04000000 $*.bit} -checksum -file $*.mcs" > generate_mcs.tcl
 	echo "exit" >> generate_mcs.tcl
 	vivado -nojournal -nolog -mode batch -source generate_mcs.tcl
 	mkdir -p rev
@@ -86,20 +86,20 @@ program: $(FPGA_TOP).bit
 	while [ -e rev/$*_rev$$COUNT.bit ]; \
 	do COUNT=$$((COUNT+1)); done; \
 	COUNT=$$((COUNT-1)); \
-	for x in _primary.mcs _secondary.mcs _primary.prm _secondary.prm; \
+	for x in .mcs .prm; \
 	do cp $*$$x rev/$*_rev$$COUNT$$x; \
 	echo "Output: rev/$*_rev$$COUNT$$x"; done;
 
-flash: $(FPGA_TOP)_primary.mcs $(FPGA_TOP)_secondary.mcs $(FPGA_TOP)_primary.prm $(FPGA_TOP)_secondary.prm
+flash: $(FPGA_TOP).mcs $(FPGA_TOP).prm
 	echo "open_hw" > flash.tcl
 	echo "connect_hw_server" >> flash.tcl
 	echo "open_hw_target" >> flash.tcl
 	echo "current_hw_device [lindex [get_hw_devices] 0]" >> flash.tcl
 	echo "refresh_hw_device -update_hw_probes false [current_hw_device]" >> flash.tcl
-	echo "create_hw_cfgmem -hw_device [current_hw_device] [lindex [get_cfgmem_parts {mt25qu01g-spi-x1_x2_x4_x8}] 0]" >> flash.tcl
+	echo "create_hw_cfgmem -hw_device [current_hw_device] [lindex [get_cfgmem_parts {mt25qu01g-spi-x1_x2_x4}] 0]" >> flash.tcl
 	echo "current_hw_cfgmem -hw_device [current_hw_device] [get_property PROGRAM.HW_CFGMEM [current_hw_device]]" >> flash.tcl
-	echo "set_property PROGRAM.FILES [list \"$(FPGA_TOP)_primary.mcs\" \"$(FPGA_TOP)_secondary.mcs\"] [current_hw_cfgmem]" >> flash.tcl
-	echo "set_property PROGRAM.PRM_FILES [list \"$(FPGA_TOP)_primary.prm\" \"$(FPGA_TOP)_secondary.prm\"] [current_hw_cfgmem]" >> flash.tcl
+	echo "set_property PROGRAM.FILES [list \"$(FPGA_TOP).mcs\"] [current_hw_cfgmem]" >> flash.tcl
+	echo "set_property PROGRAM.PRM_FILES [list \"$(FPGA_TOP).prm\"] [current_hw_cfgmem]" >> flash.tcl
 	echo "set_property PROGRAM.ERASE 1 [current_hw_cfgmem]" >> flash.tcl
 	echo "set_property PROGRAM.CFG_PROGRAM 1 [current_hw_cfgmem]" >> flash.tcl
 	echo "set_property PROGRAM.VERIFY 1 [current_hw_cfgmem]" >> flash.tcl
diff --git a/fpga/mqnic/VCU1525/fpga_10g/fpga/Makefile b/fpga/mqnic/VCU1525/fpga_10g/fpga/Makefile
index 4bc573c10..3e25eab01 100644
--- a/fpga/mqnic/VCU1525/fpga_10g/fpga/Makefile
+++ b/fpga/mqnic/VCU1525/fpga_10g/fpga/Makefile
@@ -92,8 +92,8 @@ program: $(FPGA_TOP).bit
 	echo "exit" >> program.tcl
 	vivado -nojournal -nolog -mode batch -source program.tcl
 
-%_primary.mcs %_secondary.mcs %_primary.prm %_secondary.prm: %.bit
-	echo "write_cfgmem -force -format mcs -size 256 -interface SPIx8 -loadbit {up 0x0000000 $*.bit} -checksum -file $*.mcs" > generate_mcs.tcl
+%.mcs %.prm: %.bit
+	echo "write_cfgmem -force -format mcs -size 128 -interface SPIx4 -loadbit {up 0x04000000 $*.bit} -checksum -file $*.mcs" > generate_mcs.tcl
 	echo "exit" >> generate_mcs.tcl
 	vivado -nojournal -nolog -mode batch -source generate_mcs.tcl
 	mkdir -p rev
@@ -101,20 +101,20 @@ program: $(FPGA_TOP).bit
 	while [ -e rev/$*_rev$$COUNT.bit ]; \
 	do COUNT=$$((COUNT+1)); done; \
 	COUNT=$$((COUNT-1)); \
-	for x in _primary.mcs _secondary.mcs _primary.prm _secondary.prm; \
+	for x in .mcs .prm; \
 	do cp $*$$x rev/$*_rev$$COUNT$$x; \
 	echo "Output: rev/$*_rev$$COUNT$$x"; done;
 
-flash: $(FPGA_TOP)_primary.mcs $(FPGA_TOP)_secondary.mcs $(FPGA_TOP)_primary.prm $(FPGA_TOP)_secondary.prm
+flash: $(FPGA_TOP).mcs $(FPGA_TOP).prm
 	echo "open_hw" > flash.tcl
 	echo "connect_hw_server" >> flash.tcl
 	echo "open_hw_target" >> flash.tcl
 	echo "current_hw_device [lindex [get_hw_devices] 0]" >> flash.tcl
 	echo "refresh_hw_device -update_hw_probes false [current_hw_device]" >> flash.tcl
-	echo "create_hw_cfgmem -hw_device [current_hw_device] [lindex [get_cfgmem_parts {mt25qu01g-spi-x1_x2_x4_x8}] 0]" >> flash.tcl
+	echo "create_hw_cfgmem -hw_device [current_hw_device] [lindex [get_cfgmem_parts {mt25qu01g-spi-x1_x2_x4}] 0]" >> flash.tcl
 	echo "current_hw_cfgmem -hw_device [current_hw_device] [get_property PROGRAM.HW_CFGMEM [current_hw_device]]" >> flash.tcl
-	echo "set_property PROGRAM.FILES [list \"$(FPGA_TOP)_primary.mcs\" \"$(FPGA_TOP)_secondary.mcs\"] [current_hw_cfgmem]" >> flash.tcl
-	echo "set_property PROGRAM.PRM_FILES [list \"$(FPGA_TOP)_primary.prm\" \"$(FPGA_TOP)_secondary.prm\"] [current_hw_cfgmem]" >> flash.tcl
+	echo "set_property PROGRAM.FILES [list \"$(FPGA_TOP).mcs\"] [current_hw_cfgmem]" >> flash.tcl
+	echo "set_property PROGRAM.PRM_FILES [list \"$(FPGA_TOP).prm\"] [current_hw_cfgmem]" >> flash.tcl
 	echo "set_property PROGRAM.ERASE 1 [current_hw_cfgmem]" >> flash.tcl
 	echo "set_property PROGRAM.CFG_PROGRAM 1 [current_hw_cfgmem]" >> flash.tcl
 	echo "set_property PROGRAM.VERIFY 1 [current_hw_cfgmem]" >> flash.tcl