# Corundum mqnic for Alveo

## Introduction

This design targets multiple FPGA boards, including most of the Xilinx Alveo line.

* FPGA
  * AU50: xcu50-fsvh2104-2-e
  * AU55N/C1100: xcu55n-fsvh2892-2L-e
  * AU200: xcu200-fsgd2104-2-e
  * AU250: xcu250-fsgd2104-2-e
  * AU280: xcu280-fsvh2892-2L-e
  * VCU1525: xcvu9p-fsgd2104-2L-e
* PHY: 10G BASE-R PHY IP core and internal GTY transceiver
* RAM
  * AU50: 8 GB HBM2
  * AU55N/C1100: 8 GB HBM2
  * AU200: 64 GB DDR4 2400 (4x 2G x72 DIMM)
  * AU250: 64 GB DDR4 2400 (4x 2G x72 DIMM)
  * AU280: 32 GB DDR4 2400 (2x 2G x72 DIMM) + 8 GB HBM2
  * VCU1525: 64 GB DDR4 2400 (4x 2G x72 DIMM)

## Quick start

### Build FPGA bitstream

Run `make` in the `fpga` subdirectory to build the bitstream.  Ensure that the Xilinx Vivado toolchain components are in PATH.

### Build driver and userspace tools

On the host system, run `make` in `modules/mqnic` to build the driver.  Ensure the headers for the running kernel are installed, otherwise the driver cannot be compiled.  Then, run `make` in `utils` to build the userspace tools.

### Testing

Run `make program` to program the board with Vivado.  Then, reboot the machine to re-enumerate the PCIe bus.  Finally, load the driver on the host system with `insmod mqnic.ko`.  Check `dmesg` for output from driver initialization, and run `mqnic-dump -d /dev/mqnic0` to dump the internal state.