/*

Copyright (c) 2019 Alex Forencich

Permission is hereby granted, free of charge, to any person obtaining a copy
of this software and associated documentation files (the "Software"), to deal
in the Software without restriction, including without limitation the rights
to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
copies of the Software, and to permit persons to whom the Software is
furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in
all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
THE SOFTWARE.

*/

// Language: Verilog 2001

`timescale 1ns / 1ps

/*
 * 10G Ethernet MAC/PHY combination
 */
module eth_mac_phy_10g_tx #
(
    parameter DATA_WIDTH = 64,
    parameter KEEP_WIDTH = (DATA_WIDTH/8),
    parameter HDR_WIDTH = (DATA_WIDTH/32),
    parameter ENABLE_PADDING = 1,
    parameter ENABLE_DIC = 1,
    parameter MIN_FRAME_LENGTH = 64,
    parameter PTP_PERIOD_NS = 4'h6,
    parameter PTP_PERIOD_FNS = 16'h6666,
    parameter PTP_TS_ENABLE = 0,
    parameter PTP_TS_WIDTH = 96,
    parameter PTP_TAG_ENABLE = PTP_TS_ENABLE,
    parameter PTP_TAG_WIDTH = 16,
    parameter USER_WIDTH = (PTP_TAG_ENABLE ? PTP_TAG_WIDTH : 0) + 1,
    parameter BIT_REVERSE = 0,
    parameter SCRAMBLER_DISABLE = 0,
    parameter PRBS31_ENABLE = 0,
    parameter SERDES_PIPELINE = 0
)
(
    input  wire                      clk,
    input  wire                      rst,

    /*
     * AXI input
     */
    input  wire [DATA_WIDTH-1:0]     s_axis_tdata,
    input  wire [KEEP_WIDTH-1:0]     s_axis_tkeep,
    input  wire                      s_axis_tvalid,
    output wire                      s_axis_tready,
    input  wire                      s_axis_tlast,
    input  wire [USER_WIDTH-1:0]     s_axis_tuser,

    /*
     * SERDES interface
     */
    output wire [DATA_WIDTH-1:0]     serdes_tx_data,
    output wire [HDR_WIDTH-1:0]      serdes_tx_hdr,

    /*
     * PTP
     */
    input  wire [PTP_TS_WIDTH-1:0]   ptp_ts,
    output wire [PTP_TS_WIDTH-1:0]   m_axis_ptp_ts,
    output wire [PTP_TAG_WIDTH-1:0]  m_axis_ptp_ts_tag,
    output wire                      m_axis_ptp_ts_valid,

    /*
     * Status
     */
    output wire [1:0]                tx_start_packet,
    output wire                      tx_error_underflow,

    /*
     * Configuration
     */
    input  wire [7:0]                ifg_delay,
    input  wire                      tx_prbs31_enable
);

// bus width assertions
initial begin
    if (DATA_WIDTH != 64) begin
        $error("Error: Interface width must be 64");
        $finish;
    end

    if (KEEP_WIDTH * 8 != DATA_WIDTH) begin
        $error("Error: Interface requires byte (8-bit) granularity");
        $finish;
    end

    if (HDR_WIDTH * 32 != DATA_WIDTH) begin
        $error("Error: HDR_WIDTH must be equal to DATA_WIDTH/32");
        $finish;
    end
end

wire [DATA_WIDTH-1:0] encoded_tx_data;
wire [HDR_WIDTH-1:0]  encoded_tx_hdr;

axis_baser_tx_64 #(
    .DATA_WIDTH(DATA_WIDTH),
    .KEEP_WIDTH(KEEP_WIDTH),
    .HDR_WIDTH(HDR_WIDTH),
    .ENABLE_PADDING(ENABLE_PADDING),
    .ENABLE_DIC(ENABLE_DIC),
    .MIN_FRAME_LENGTH(MIN_FRAME_LENGTH),
    .PTP_PERIOD_NS(PTP_PERIOD_NS),
    .PTP_PERIOD_FNS(PTP_PERIOD_FNS),
    .PTP_TS_ENABLE(PTP_TS_ENABLE),
    .PTP_TS_WIDTH(PTP_TS_WIDTH),
    .PTP_TAG_ENABLE(PTP_TAG_ENABLE),
    .PTP_TAG_WIDTH(PTP_TAG_WIDTH),
    .USER_WIDTH(USER_WIDTH)
)
axis_baser_tx_inst (
    .clk(clk),
    .rst(rst),
    .s_axis_tdata(s_axis_tdata),
    .s_axis_tkeep(s_axis_tkeep),
    .s_axis_tvalid(s_axis_tvalid),
    .s_axis_tready(s_axis_tready),
    .s_axis_tlast(s_axis_tlast),
    .s_axis_tuser(s_axis_tuser),
    .encoded_tx_data(encoded_tx_data),
    .encoded_tx_hdr(encoded_tx_hdr),
    .ptp_ts(ptp_ts),
    .m_axis_ptp_ts(m_axis_ptp_ts),
    .m_axis_ptp_ts_tag(m_axis_ptp_ts_tag),
    .m_axis_ptp_ts_valid(m_axis_ptp_ts_valid),
    .start_packet(tx_start_packet),
    .error_underflow(tx_error_underflow),
    .ifg_delay(ifg_delay)
);

eth_phy_10g_tx_if #(
    .DATA_WIDTH(DATA_WIDTH),
    .HDR_WIDTH(HDR_WIDTH),
    .BIT_REVERSE(BIT_REVERSE),
    .SCRAMBLER_DISABLE(SCRAMBLER_DISABLE),
    .PRBS31_ENABLE(PRBS31_ENABLE),
    .SERDES_PIPELINE(SERDES_PIPELINE)
)
eth_phy_10g_tx_if_inst (
    .clk(clk),
    .rst(rst),
    .encoded_tx_data(encoded_tx_data),
    .encoded_tx_hdr(encoded_tx_hdr),
    .serdes_tx_data(serdes_tx_data),
    .serdes_tx_hdr(serdes_tx_hdr),
    .tx_prbs31_enable(tx_prbs31_enable)
);

endmodule