mirror of
https://github.com/corundum/corundum.git
synced 2025-01-16 08:12:53 +08:00
Corundum mqnic for IA-420F
Introduction
This design targets the BittWare IA-420F FPGA development board.
- FPGA: AGFB014R24B2E2V
- PHY: E-Tile
Quick start
Build FPGA bitstream
Run make in the fpga subdirectory to build the bitstream. Ensure that the Intel Quartus Pro toolchain components are in PATH.
Build driver and userspace tools
On the host system, run make in modules/mqnic to build the driver. Ensure the headers for the running kernel are installed, otherwise the driver cannot be compiled. Then, run make in utils to build the userspace tools.
Testing
Run make program to program the board with Quartus. Then, reboot the machine to re-enumerate the PCIe bus. Finally, load the driver on the host system with insmod mqnic.ko. Check dmesg for output from driver initialization, and run mqnic-dump -d /dev/mqnic0 to dump the internal state.