corundum/example/ExaNIC_X25/fpga_axi

Verilog PCIe ExaNIC X25 Example Design

Introduction

This example design targets the Exablaze ExaNIC X25 FPGA board.

The design implements the PCIe AXI lite master module, the PCIe AXI master module, and the PCIe AXI DMA module. A very simple Linux driver is included to test the FPGA design.

FPGA: xcku3p-ffvb676-2-e

How to build

Run make to build. Ensure that the Xilinx Vivado toolchain components are in PATH.

Run make to build the driver. Ensure the headers for the running kernel are installed, otherwise the driver cannot be compiled.

How to test

Run make program to program the ExaNIC X25 board with Vivado. Then load the driver with insmod example.ko. Check dmesg for the output.