corundum/fpga/mqnic/XUPP3R/fpga_25g

Corundum mqnic for XUP-P3R

Introduction

This design targets the BittWare XUP-P3R FPGA board.

• FPGA: xcvu9p-flgb2104-2-e
• PHY: 10G BASE-R PHY IP core and internal GTY transceiver

How to build

Run make to build. Ensure that the Xilinx Vivado toolchain components are in PATH.

Run make to build the driver. Ensure the headers for the running kernel are installed, otherwise the driver cannot be compiled.

How to test

Run make program to program the XUP-P3R board with Vivado. Then load the driver with insmod mqnic.ko. Check dmesg for output from driver initialization.