FPGA/corundum
1
0
Fork 0
mirror of https://github.com/corundum/corundum.git synced 2025-01-16 08:12:53 +08:00
Code Issues Projects Releases Wiki Activity
corundum/fpga/mqnic/ZCU106/fpga_zynqmp
History
Alex Forencich 57905a5ef9 fpga/mqnic/ZCU106/fpga_zynqmp: Rewrite zynq PS TCL script, rework PS clock settings, switch to 300 MHz PL clock 
Signed-off-by: Alex Forencich <alex@alexforencich.com>
2022-04-11 12:25:51 -07:00
..
common
ZCU106/: Add design based on ZynqMP PS as host system, Vivado v2021.1
2022-03-31 17:22:27 +02:00
fpga
fpga/mqnic/ZCU106/fpga_zynqmp: Rewrite zynq PS TCL script, rework PS clock settings, switch to 300 MHz PL clock
2022-04-11 12:25:51 -07:00
ip
fpga/mqnic/ZCU106/fpga_zynqmp: Rewrite zynq PS TCL script, rework PS clock settings, switch to 300 MHz PL clock
2022-04-11 12:25:51 -07:00
ps/petalinux
fpga/mqnic/ZCU106/fpga_zynqmp: Rewrite zynq PS TCL script, rework PS clock settings, switch to 300 MHz PL clock
2022-04-11 12:25:51 -07:00
rtl
fpga/mqnic/ZCU106/fpga_zynqmp: Rewrite zynq PS TCL script, rework PS clock settings, switch to 300 MHz PL clock
2022-04-11 12:25:51 -07:00
tb/fpga_core
fpga/mqnic/ZCU106/fpga_zynqmp: Rewrite zynq PS TCL script, rework PS clock settings, switch to 300 MHz PL clock
2022-04-11 12:25:51 -07:00
app
ZCU106/: Add design based on ZynqMP PS as host system, Vivado v2021.1
2022-03-31 17:22:27 +02:00
fpga.xdc
ZCU106/: Add design based on ZynqMP PS as host system, Vivado v2021.1
2022-03-31 17:22:27 +02:00
lib
ZCU106/: Add design based on ZynqMP PS as host system, Vivado v2021.1
2022-03-31 17:22:27 +02:00
Makefile
ZCU106/: Add design based on ZynqMP PS as host system, Vivado v2021.1
2022-03-31 17:22:27 +02:00
README.md
ZCU106/fpga_zynqmp/ps/petalinux/: Add shortcut Makefile target "build-boot" to build PetaLinux including boot files in one step
2022-04-07 18:41:05 +02:00

README.md

Corundum mqnic for ZCU106 using ZynqMP PS as host system

Introduction

This design targets the Xilinx ZCU106 FPGA board. The host system of the NIC is the Zynq US+ MPSoC.

FPGA: xczu7ev-ffvc1156-2-e PHY: 10G BASE-R PHY IP core and internal GTH transceiver

How to build

Run make in this directory to build the bitstream and the .xsa file. Ensure that the Xilinx Vivado toolchain components are in PATH.

Then change into sub-directory ps/petalinux/ and build the PetaLinux project. Ensure that the Xilinx PetaLinux toolchain components are in PATH.

make -C ps/petalinux/ build-boot

How to test

Copy the following, resulting files of building the PetaLinux project onto an SDcard suitable for then booting the ZCU106 in SDcard boot mode.

ps/petalinux/images/linux/:
	BOOT.BIN
	boot.scr
	Image
	system.dtb
	rootfs.cpio.gz.u-boot