mirror of
https://github.com/corundum/corundum.git
synced 2025-01-16 08:12:53 +08:00
Verilog Ethernet ML605 SGMII Example Design
Introduction
This example design targets the Xilinx ML605 FPGA board.
The design by default listens to UDP port 1234 at IP address 192.168.1.128 and will echo back any packets received. The design will also respond correctly to ARP requests.
Configure the PHY for SGMII by placing J66 and J67 across pins 2 and 3 and opening J68.
- FPGA: XC6VLX130T-1FF1156 or XC6VLX240T-1FF1156
- PHY: Marvell M88E1111
How to build
Run make to build. Ensure that the Xilinx ISE toolchain components are in PATH.
How to test
Run make program to program the ML605 board with the Xilinx Impact software. Then run
netcat -u 192.168.1.128 1234
to open a UDP connection to port 1234. Any text entered into netcat will be echoed back after pressing enter.
It is also possible to use hping to test the design by running
hping 192.168.1.128 -2 -p 1234 -d 1024