mirror of
https://github.com/corundum/corundum.git
synced 2025-01-16 08:12:53 +08:00
1133 lines
53 KiB
ReStructuredText
1133 lines
53 KiB
ReStructuredText
.. _mod_mqnic_app_block:
|
|
|
|
===================
|
|
``mqnic_app_block``
|
|
===================
|
|
|
|
``mqnic_app_block`` is the top-level block for application logic. It is instantiated in :ref:`mod_mqnic_core`. This is a pluggable module, intended to be replaced by a customized implementation via the build system. See .... for more details.
|
|
|
|
A number of interfaces are provided:
|
|
|
|
* Clock and reset synchronous with core datapath
|
|
* Dedicated AXI-lite master interface for application control (``s_axil_app_ctrl``)
|
|
* AXI-lite slave interface for access to NIC control register space (``m_axil_ctrl``)
|
|
* Access to DMA subsystem (``*_axis_*_dma_*_desc``, ``*_dma_ram``)
|
|
* Access to PTP subsystem (``ptp_*``)
|
|
* Direct, MAC-synchronous, lowest-latency streaming interface (``*_axis_direct_*``)
|
|
* Direct, datapath-synchronous, low-latency streaming interface (``*_axis_sync_*``)
|
|
* Interface-level streaming interface (``*_axis_if_*``)
|
|
* Statistics interface (``m_axis_stat``)
|
|
* GPIO and JTAG passthrough (``gpio``, ``jtag``)
|
|
|
|
Packet data from the host passes through all three streaming interfaces on its way to the network, and vise-versa. The three interfaces are:
|
|
|
|
1. ``*_axis_direct_*``: Direct, MAC-synchronous, lowest-latency streaming interface. This interface is as close as possible to the main transmit and receive interfaces on :ref:`mod_mqnic_core`, and is synchronous to the TX and RX clocks instead of the core clock. Enabled/bypassed via ``APP_AXIS_DIRECT_ENABLE`` in ``config.tcl``.
|
|
2. ``*_axis_sync_*``: Direct, datapath-synchronous, low-latency streaming interface. This interface handles per-port data between the main transmit and receive FIFOs and the async FIFOs, and is synchronous to the core clock. Enabled/bypassed via ``APP_AXIS_SYNC_ENABLE`` in ``config.tcl``.
|
|
3. ``*_axis_if_*``: Interface-level streaming interface. This interface handles aggregated interface-level data between the host and the main receive and transmit FIFOs, and is synchronous to the core clock. Enabled/bypassed via ``APP_AXIS_IF_ENABLE`` in ``config.tcl``.
|
|
|
|
On the transmit path, data flows as follows:
|
|
|
|
1. :ref:`mod_mqnic_interface_tx`: data is read from host memory via DMA
|
|
2. :ref:`mod_mqnic_egress`: egress processing
|
|
3. ``s_axis_if_tx``: data is presented to the application section
|
|
4. ``m_axis_if_tx``: data is returned from the application section
|
|
5. Data passes enters per-interface transmit FIFO module and is divided into per-port, per-traffic-class FIFOs
|
|
6. ``s_axis_sync_tx``: data is presented to the application section
|
|
7. ``m_axis_sync_tx``: data is returned from the application section
|
|
8. Data passes through per-port transmit async FIFO module and is transferred to MAC TX clock domain
|
|
9. ``s_axis_direct_tx``: data is presented to the application section
|
|
10. ``m_axis_direct_tx``: data is returned from the application section
|
|
11. :ref:`mod_mqnic_l2_egress`: layer 2 egress processing
|
|
12. :ref:`mod_mqnic_core`: data leaves through transmit streaming interfaces
|
|
|
|
On the receive path, data flows as follows:
|
|
|
|
1. :ref:`mod_mqnic_core`: data enters through receive streaming interfaces
|
|
2. :ref:`mod_mqnic_l2_ingress`: layer 2 ingress processing
|
|
3. ``s_axis_direct_rx``: data is presented to the application section
|
|
4. ``m_axis_direct_rx``: data is returned from the application section
|
|
5. Data passes through per-port receive async FIFO module and is transferred to core clock domain
|
|
6. ``s_axis_sync_rx``: data is presented to the application section
|
|
7. ``m_axis_sync_rx``: data is returned from the application section
|
|
8. Data passes enters per-interface receive FIFO module and is placed into per-port FIFOs, then aggregated into a single stream
|
|
9. ``s_axis_if_rx``: data is presented to the application section
|
|
10. ``m_axis_if_rx``: data is returned from the application section
|
|
11. :ref:`mod_mqnic_ingress`: ingress processing
|
|
12. :ref:`mod_mqnic_interface_rx`: data is read from host memory via DMA
|
|
|
|
Parameters
|
|
==========
|
|
|
|
.. object:: IF_COUNT
|
|
|
|
Interface count, default ``1``.
|
|
|
|
.. object:: PORTS_PER_IF
|
|
|
|
Ports per interface, default ``1``.
|
|
|
|
.. object:: SCHED_PER_IF
|
|
|
|
Schedulers per interface, default ``PORTS_PER_IF``.
|
|
|
|
.. object:: PORT_COUNT
|
|
|
|
Total port count, must be set to ``IF_COUNT*PORTS_PER_IF``.
|
|
|
|
.. object:: CLK_PERIOD_NS_NUM
|
|
|
|
Numerator of core clock period in ns, default ``4``.
|
|
|
|
.. object:: CLK_PERIOD_NS_DENOM
|
|
|
|
Denominator of core clock period in ns, default ``1``.
|
|
|
|
.. object:: PTP_CLK_PERIOD_NS_NUM
|
|
|
|
Numerator of PTP clock period in ns, default ``4``.
|
|
|
|
.. object:: PTP_CLK_PERIOD_NS_DENOM
|
|
|
|
Denominator of PTP clock period in ns, default ``1``.
|
|
|
|
.. object:: PTP_TS_WIDTH
|
|
|
|
PTP timestamp width, must be ``96``.
|
|
|
|
.. object:: PTP_USE_SAMPLE_CLOCK
|
|
|
|
Use external PTP sample clock, used to synchronize the PTP clock across clock domains. Default ``0``.
|
|
|
|
.. object:: PTP_PORT_CDC_PIPELINE
|
|
|
|
Output pipeline stages on PTP clock CDC module, default ``0``.
|
|
|
|
.. object:: PTP_PEROUT_ENABLE
|
|
|
|
Enable PTP period output module, default ``0``.
|
|
|
|
.. object:: PTP_PEROUT_COUNT
|
|
|
|
Number of PTP period output channels, default ``1``.
|
|
|
|
.. object:: PTP_TS_ENABLE
|
|
|
|
Enable PTP timestamping, default ``1``.
|
|
|
|
.. object:: TX_TAG_WIDTH
|
|
|
|
Transmit tag signal width, default ``16``.
|
|
|
|
.. object:: MAX_TX_SIZE
|
|
|
|
Maximum packet size on transmit path, default ``9214``.
|
|
|
|
.. object:: MAX_RX_SIZE
|
|
|
|
Maximum packet size on receive path, default ``9214``.
|
|
|
|
.. object:: APP_ID
|
|
|
|
Application ID, default ``0``.
|
|
|
|
.. object:: APP_CTRL_ENABLE
|
|
|
|
Enable application section control connection to core NIC registers, default ``1``.
|
|
|
|
.. object:: APP_DMA_ENABLE
|
|
|
|
Enable application section connection to DMA subsystem, default ``1``.
|
|
|
|
.. object:: APP_AXIS_DIRECT_ENABLE
|
|
|
|
Enable lowest-latency asynchronous streaming connection to application section, default ``1``
|
|
|
|
.. object:: APP_AXIS_SYNC_ENABLE
|
|
|
|
Enable low-latency synchronous streaming connection to application section, default ``1``
|
|
|
|
.. object:: APP_AXIS_IF_ENABLE
|
|
|
|
Enable interface-level streaming connection to application section, default ``1``
|
|
|
|
.. object:: APP_STAT_ENABLE
|
|
|
|
Enable application section connection to statistics collection subsystem, default ``1``
|
|
|
|
.. object:: APP_GPIO_IN_WIDTH
|
|
|
|
Application section GPIO input signal width, default ``32``
|
|
|
|
.. object:: APP_GPIO_OUT_WIDTH
|
|
|
|
Application section GPIO output signal width, default ``32``
|
|
|
|
.. object:: DMA_ADDR_WIDTH
|
|
|
|
DMA interface address signal width, default ``64``.
|
|
|
|
.. object:: DMA_IMM_ENABLE
|
|
|
|
DMA interface immediate enable, default ``0``.
|
|
|
|
.. object:: DMA_IMM_WIDTH
|
|
|
|
DMA interface immediate signal width, default ``32``.
|
|
|
|
.. object:: DMA_LEN_WIDTH
|
|
|
|
DMA interface length signal width, default ``16``.
|
|
|
|
.. object:: DMA_TAG_WIDTH
|
|
|
|
DMA interface tag signal width, default ``16``.
|
|
|
|
.. object:: RAM_SEL_WIDTH
|
|
|
|
Width of select signal per segment in DMA RAM interface, default ``4``.
|
|
|
|
.. object:: RAM_ADDR_WIDTH
|
|
|
|
Width of address signal for DMA RAM interface, default ``16``.
|
|
|
|
.. object:: RAM_SEG_COUNT
|
|
|
|
Number of segments in DMA RAM interface, default ``2``. Must be a power of 2, must be at least 2.
|
|
|
|
.. object:: RAM_SEG_DATA_WIDTH
|
|
|
|
Width of data signal per segment in DMA RAM interface, default ``256*2/RAM_SEG_COUNT``.
|
|
|
|
.. object:: RAM_SEG_BE_WIDTH
|
|
|
|
Width of byte enable signal per segment in DMA RAM interface, default ``RAM_SEG_DATA_WIDTH/8``.
|
|
|
|
.. object:: RAM_SEG_ADDR_WIDTH
|
|
|
|
Width of address signal per segment in DMA RAM interface, default ``RAM_ADDR_WIDTH-$clog2(RAM_SEG_COUNT*RAM_SEG_BE_WIDTH)``.
|
|
|
|
.. object:: RAM_PIPELINE
|
|
|
|
Number of output pipeline stages in segmented DMA RAMs, default ``2``. Tune for best usage of block RAM cascade registers.
|
|
|
|
.. object:: AXIL_APP_CTRL_DATA_WIDTH
|
|
|
|
AXI lite application control data signal width, default ``AXIL_CTRL_DATA_WIDTH``. Can be 32 or 64.
|
|
|
|
.. object:: AXIL_APP_CTRL_ADDR_WIDTH
|
|
|
|
AXI lite application control address signal width, default ``16``.
|
|
|
|
.. object:: AXIL_APP_CTRL_STRB_WIDTH
|
|
|
|
AXI lite application control byte enable signal width, must be set to ``AXIL_APP_CTRL_DATA_WIDTH/8``.
|
|
|
|
.. object:: AXIL_CTRL_DATA_WIDTH
|
|
|
|
AXI lite control data signal width, default ``32``. Must be 32.
|
|
|
|
.. object:: AXIL_CTRL_ADDR_WIDTH
|
|
|
|
AXI lite control address signal width, default ``16``.
|
|
|
|
.. object:: AXIL_CTRL_STRB_WIDTH
|
|
|
|
AXI lite control byte enable signal width, must be set to ``AXIL_CTRL_DATA_WIDTH/8``.
|
|
|
|
.. object:: AXIS_DATA_WIDTH
|
|
|
|
Asynchronous streaming interface ``tdata`` signal width, default ``512``.
|
|
|
|
.. object:: AXIS_KEEP_WIDTH
|
|
|
|
Asynchronous streaming interface ``tkeep`` signal width, must be set to ``AXIS_DATA_WIDTH/8``.
|
|
|
|
.. object:: AXIS_TX_USER_WIDTH
|
|
|
|
Asynchronous streaming transmit interface ``tuser`` signal width, default ``TX_TAG_WIDTH + 1``.
|
|
|
|
.. object:: AXIS_RX_USER_WIDTH
|
|
|
|
Asynchronous streaming receive interface ``tuser`` signal width, default ``(PTP_TS_ENABLE ? PTP_TS_WIDTH : 0) + 1``.
|
|
|
|
.. object:: AXIS_RX_USE_READY
|
|
|
|
Use ``tready`` signal on RX interfaces, default ``0``. If set, logic will exert backpressure with ``tready`` instead of dropping packets when RX FIFOs are full.
|
|
|
|
.. object:: AXIS_SYNC_DATA_WIDTH
|
|
|
|
Synchronous streaming interface ``tdata`` signal width, default ``AXIS_DATA_WIDTH``.
|
|
|
|
.. object:: AXIS_SYNC_KEEP_WIDTH
|
|
|
|
Synchronous streaming interface ``tkeep`` signal width, must be set to ``AXIS_SYNC_DATA_WIDTH/8``.
|
|
|
|
.. object:: AXIS_SYNC_TX_USER_WIDTH
|
|
|
|
Synchronous streaming transmit interface ``tuser`` signal width, default ``AXIS_TX_USER_WIDTH``.
|
|
|
|
.. object:: AXIS_SYNC_RX_USER_WIDTH
|
|
|
|
Synchronous streaming receive interface ``tuser`` signal width, default ``AXIS_RX_USER_WIDTH``.
|
|
|
|
.. object:: AXIS_IF_DATA_WIDTH
|
|
|
|
Interface streaming interface ``tdata`` signal width, default ``AXIS_SYNC_DATA_WIDTH*2**$clog2(PORTS_PER_IF)``.
|
|
|
|
.. object:: AXIS_IF_KEEP_WIDTH
|
|
|
|
Interface streaming interface ``tkeep`` signal width, must be set to ``AXIS_IF_DATA_WIDTH/8``.
|
|
|
|
.. object:: AXIS_IF_TX_ID_WIDTH
|
|
|
|
Interface transmit streaming interface ``tid`` signal width, default ``12``.
|
|
|
|
.. object:: AXIS_IF_RX_ID_WIDTH
|
|
|
|
Interface receive streaming interface ``tid`` signal width, default ``PORTS_PER_IF > 1 ? $clog2(PORTS_PER_IF) : 1``.
|
|
|
|
.. object:: AXIS_IF_TX_DEST_WIDTH
|
|
|
|
Interface transmit streaming interface ``tdest`` signal width, default ``$clog2(PORTS_PER_IF)+4``.
|
|
|
|
.. object:: AXIS_IF_RX_DEST_WIDTH
|
|
|
|
Interface receive streaming interface ``tdest`` signal width, default ``8``.
|
|
|
|
.. object:: AXIS_IF_TX_USER_WIDTH
|
|
|
|
Interface transmit streaming interface ``tuser`` signal width, default ``AXIS_SYNC_TX_USER_WIDTH``.
|
|
|
|
.. object:: AXIS_IF_RX_USER_WIDTH
|
|
|
|
Interface receive streaming interface ``tuser`` signal width, default ``AXIS_SYNC_RX_USER_WIDTH``.
|
|
|
|
.. object:: STAT_ENABLE
|
|
|
|
Enable statistics collection subsystem, default ``1``.
|
|
|
|
.. object:: STAT_INC_WIDTH
|
|
|
|
Statistics increment signal width, default ``24``.
|
|
|
|
.. object:: STAT_ID_WIDTH
|
|
|
|
Statistics ID signal width, default ``12``. Sets the number of statistics counters as ``2**STAT_ID_WIDTH``.
|
|
|
|
Ports
|
|
=====
|
|
|
|
.. object:: clk
|
|
|
|
Logic clock. Most interfaces are synchronous to this clock.
|
|
|
|
.. table::
|
|
|
|
====== === ===== ==================
|
|
Signal Dir Width Description
|
|
====== === ===== ==================
|
|
clk in 1 Logic clock
|
|
====== === ===== ==================
|
|
|
|
.. object:: rst
|
|
|
|
Logic reset, active high
|
|
|
|
.. table::
|
|
|
|
====== === ===== ==================
|
|
Signal Dir Width Description
|
|
====== === ===== ==================
|
|
rst in 1 Logic reset, active high
|
|
====== === ===== ==================
|
|
|
|
.. object:: s_axil_app_ctrl
|
|
|
|
AXI-Lite slave interface (application control).
|
|
|
|
.. table::
|
|
|
|
======================= === ======================== ===================
|
|
Signal Dir Width Description
|
|
======================= === ======================== ===================
|
|
s_axil_app_ctrl_awaddr in AXIL_APP_CTRL_ADDR_WIDTH Write address
|
|
s_axil_app_ctrl_awprot in 3 Write protect
|
|
s_axil_app_ctrl_awvalid in 1 Write address valid
|
|
s_axil_app_ctrl_awready out 1 Write address ready
|
|
s_axil_app_ctrl_wdata in AXIL_APP_CTRL_DATA_WIDTH Write data
|
|
s_axil_app_ctrl_wstrb in AXIL_APP_CTRL_STRB_WIDTH Write data strobe
|
|
s_axil_app_ctrl_wvalid in 1 Write data valid
|
|
s_axil_app_ctrl_wready out 1 Write data ready
|
|
s_axil_app_ctrl_bresp out 2 Write response status
|
|
s_axil_app_ctrl_bvalid out 1 Write response valid
|
|
s_axil_app_ctrl_bready in 1 Write response ready
|
|
s_axil_app_ctrl_araddr in AXIL_APP_CTRL_ADDR_WIDTH Read address
|
|
s_axil_app_ctrl_arprot in 3 Read protect
|
|
s_axil_app_ctrl_arvalid in 1 Read address valid
|
|
s_axil_app_ctrl_arready out 1 Read address ready
|
|
s_axil_app_ctrl_rdata out AXIL_APP_CTRL_DATA_WIDTH Read response data
|
|
s_axil_app_ctrl_rresp out 2 Read response status
|
|
s_axil_app_ctrl_rvalid out 1 Read response valid
|
|
s_axil_app_ctrl_rready in 1 Read response ready
|
|
======================= === ======================== ===================
|
|
|
|
.. object:: m_axil_ctrl
|
|
|
|
AXI-Lite master interface (control). This interface provides access to the main NIC control register space.
|
|
|
|
.. table::
|
|
|
|
=================== === ==================== ===================
|
|
Signal Dir Width Description
|
|
=================== === ==================== ===================
|
|
m_axil_ctrl_awaddr in AXIL_CTRL_ADDR_WIDTH Write address
|
|
m_axil_ctrl_awprot in 3 Write protect
|
|
m_axil_ctrl_awvalid in 1 Write address valid
|
|
m_axil_ctrl_awready out 1 Write address ready
|
|
m_axil_ctrl_wdata in AXIL_CTRL_DATA_WIDTH Write data
|
|
m_axil_ctrl_wstrb in AXIL_CTRL_STRB_WIDTH Write data strobe
|
|
m_axil_ctrl_wvalid in 1 Write data valid
|
|
m_axil_ctrl_wready out 1 Write data ready
|
|
m_axil_ctrl_bresp out 2 Write response status
|
|
m_axil_ctrl_bvalid out 1 Write response valid
|
|
m_axil_ctrl_bready in 1 Write response ready
|
|
m_axil_ctrl_araddr in AXIL_CTRL_ADDR_WIDTH Read address
|
|
m_axil_ctrl_arprot in 3 Read protect
|
|
m_axil_ctrl_arvalid in 1 Read address valid
|
|
m_axil_ctrl_arready out 1 Read address ready
|
|
m_axil_ctrl_rdata out AXIL_CTRL_DATA_WIDTH Read response data
|
|
m_axil_ctrl_rresp out 2 Read response status
|
|
m_axil_ctrl_rvalid out 1 Read response valid
|
|
m_axil_ctrl_rready in 1 Read response ready
|
|
=================== === ==================== ===================
|
|
|
|
.. object:: m_axis_ctrl_dma_read_desc
|
|
|
|
DMA read descriptor output (control)
|
|
|
|
.. table::
|
|
|
|
================================== === ============== ===================
|
|
Signal Dir Width Description
|
|
================================== === ============== ===================
|
|
m_axis_ctrl_dma_read_desc_dma_addr out DMA_ADDR_WIDTH DMA address
|
|
m_axis_ctrl_dma_read_desc_ram_sel out RAM_SEL_WIDTH RAM select
|
|
m_axis_ctrl_dma_read_desc_ram_addr out RAM_ADDR_WIDTH RAM address
|
|
m_axis_ctrl_dma_read_desc_len out DMA_LEN_WIDTH Transfer length
|
|
m_axis_ctrl_dma_read_desc_tag out DMA_TAG_WIDTH Transfer tag
|
|
m_axis_ctrl_dma_read_desc_valid out 1 Request valid
|
|
m_axis_ctrl_dma_read_desc_ready in 1 Request ready
|
|
================================== === ============== ===================
|
|
|
|
.. object:: s_axis_ctrl_dma_read_desc_status
|
|
|
|
DMA read descriptor status input (control)
|
|
|
|
.. table::
|
|
|
|
====================================== === ============= ===================
|
|
Signal Dir Width Description
|
|
====================================== === ============= ===================
|
|
s_axis_ctrl_dma_read_desc_status_tag in DMA_TAG_WIDTH Status tag
|
|
s_axis_ctrl_dma_read_desc_status_error in 4 Status error code
|
|
s_axis_ctrl_dma_read_desc_status_valid in 1 Status valid
|
|
====================================== === ============= ===================
|
|
|
|
.. object:: m_axis_ctrl_dma_write_desc
|
|
|
|
DMA write descriptor output (control)
|
|
|
|
.. table::
|
|
|
|
=================================== === ============== ===================
|
|
Signal Dir Width Description
|
|
=================================== === ============== ===================
|
|
m_axis_ctrl_dma_write_desc_dma_addr out DMA_ADDR_WIDTH DMA address
|
|
m_axis_ctrl_dma_write_desc_ram_sel out RAM_SEL_WIDTH RAM select
|
|
m_axis_ctrl_dma_write_desc_ram_addr out RAM_ADDR_WIDTH RAM address
|
|
m_axis_ctrl_dma_write_desc_imm out DMA_IMM_WIDTH Immediate
|
|
m_axis_ctrl_dma_write_desc_imm_en out 1 Immediate enable
|
|
m_axis_ctrl_dma_write_desc_len out DMA_LEN_WIDTH Transfer length
|
|
m_axis_ctrl_dma_write_desc_tag out DMA_TAG_WIDTH Transfer tag
|
|
m_axis_ctrl_dma_write_desc_valid out 1 Request valid
|
|
m_axis_ctrl_dma_write_desc_ready in 1 Request ready
|
|
=================================== === ============== ===================
|
|
|
|
.. object:: s_axis_ctrl_dma_write_desc_status
|
|
|
|
DMA write descriptor status input (control)
|
|
|
|
.. table::
|
|
|
|
======================================= === ============= ===================
|
|
Signal Dir Width Description
|
|
======================================= === ============= ===================
|
|
s_axis_ctrl_dma_write_desc_status_tag in DMA_TAG_WIDTH Status tag
|
|
s_axis_ctrl_dma_write_desc_status_error in 4 Status error code
|
|
s_axis_ctrl_dma_write_desc_status_valid in 1 Status valid
|
|
======================================= === ============= ===================
|
|
|
|
.. object:: m_axis_data_dma_read_desc
|
|
|
|
DMA read descriptor output (data)
|
|
|
|
.. table::
|
|
|
|
================================== === ============== ===================
|
|
Signal Dir Width Description
|
|
================================== === ============== ===================
|
|
m_axis_data_dma_read_desc_dma_addr out DMA_ADDR_WIDTH DMA address
|
|
m_axis_data_dma_read_desc_ram_sel out RAM_SEL_WIDTH RAM select
|
|
m_axis_data_dma_read_desc_ram_addr out RAM_ADDR_WIDTH RAM address
|
|
m_axis_data_dma_read_desc_len out DMA_LEN_WIDTH Transfer length
|
|
m_axis_data_dma_read_desc_tag out DMA_TAG_WIDTH Transfer tag
|
|
m_axis_data_dma_read_desc_valid out 1 Request valid
|
|
m_axis_data_dma_read_desc_ready in 1 Request ready
|
|
================================== === ============== ===================
|
|
|
|
.. object:: s_axis_data_dma_read_desc_status
|
|
|
|
DMA read descriptor status input (data)
|
|
|
|
.. table::
|
|
|
|
====================================== === ============= ===================
|
|
Signal Dir Width Description
|
|
====================================== === ============= ===================
|
|
s_axis_data_dma_read_desc_status_tag in DMA_TAG_WIDTH Status tag
|
|
s_axis_data_dma_read_desc_status_error in 4 Status error code
|
|
s_axis_data_dma_read_desc_status_valid in 1 Status valid
|
|
====================================== === ============= ===================
|
|
|
|
.. object:: m_axis_data_dma_write_desc
|
|
|
|
DMA write descriptor output (data)
|
|
|
|
.. table::
|
|
|
|
=================================== === ============== ===================
|
|
Signal Dir Width Description
|
|
=================================== === ============== ===================
|
|
m_axis_data_dma_write_desc_dma_addr out DMA_ADDR_WIDTH DMA address
|
|
m_axis_data_dma_write_desc_ram_sel out RAM_SEL_WIDTH RAM select
|
|
m_axis_data_dma_write_desc_ram_addr out RAM_ADDR_WIDTH RAM address
|
|
m_axis_data_dma_write_desc_imm out DMA_IMM_WIDTH Immediate
|
|
m_axis_data_dma_write_desc_imm_en out 1 Immediate enable
|
|
m_axis_data_dma_write_desc_len out DMA_LEN_WIDTH Transfer length
|
|
m_axis_data_dma_write_desc_tag out DMA_TAG_WIDTH Transfer tag
|
|
m_axis_data_dma_write_desc_valid out 1 Request valid
|
|
m_axis_data_dma_write_desc_ready in 1 Request ready
|
|
=================================== === ============== ===================
|
|
|
|
.. object:: s_axis_data_dma_write_desc_status
|
|
|
|
DMA write descriptor status input (data)
|
|
|
|
.. table::
|
|
|
|
======================================= === ============= ===================
|
|
Signal Dir Width Description
|
|
======================================= === ============= ===================
|
|
s_axis_data_dma_write_desc_status_tag in DMA_TAG_WIDTH Status tag
|
|
s_axis_data_dma_write_desc_status_error in 4 Status error code
|
|
s_axis_data_dma_write_desc_status_valid in 1 Status valid
|
|
======================================= === ============= ===================
|
|
|
|
.. object:: ctrl_dma_ram
|
|
|
|
DMA RAM interface (control)
|
|
|
|
.. table::
|
|
|
|
========================== === ================================ ===================
|
|
Signal Dir Width Description
|
|
========================== === ================================ ===================
|
|
ctrl_dma_ram_wr_cmd_sel in RAM_SEG_COUNT*RAM_SEL_WIDTH Write command select
|
|
ctrl_dma_ram_wr_cmd_be in RAM_SEG_COUNT*RAM_SEG_BE_WIDTH Write command byte enable
|
|
ctrl_dma_ram_wr_cmd_addr in RAM_SEG_COUNT*RAM_SEG_ADDR_WIDTH Write command address
|
|
ctrl_dma_ram_wr_cmd_data in RAM_SEG_COUNT*RAM_SEG_DATA_WIDTH Write command data
|
|
ctrl_dma_ram_wr_cmd_valid in RAM_SEG_COUNT Write command valid
|
|
ctrl_dma_ram_wr_cmd_ready out RAM_SEG_COUNT Write command ready
|
|
ctrl_dma_ram_wr_done out RAM_SEG_COUNT Write done
|
|
ctrl_dma_ram_rd_cmd_sel in RAM_SEG_COUNT*RAM_SEL_WIDTH Read command select
|
|
ctrl_dma_ram_rd_cmd_addr in RAM_SEG_COUNT*RAM_SEG_ADDR_WIDTH Read command address
|
|
ctrl_dma_ram_rd_cmd_valid in RAM_SEG_COUNT Read command valid
|
|
ctrl_dma_ram_rd_cmd_ready out RAM_SEG_COUNT Read command ready
|
|
ctrl_dma_ram_rd_resp_data out RAM_SEG_COUNT*RAM_SEG_DATA_WIDTH Read response data
|
|
ctrl_dma_ram_rd_resp_valid out RAM_SEG_COUNT Read response valid
|
|
ctrl_dma_ram_rd_resp_ready in RAM_SEG_COUNT Read response ready
|
|
========================== === ================================ ===================
|
|
|
|
.. object:: data_dma_ram
|
|
|
|
DMA RAM interface (data)
|
|
|
|
.. table::
|
|
|
|
========================== === ================================ ===================
|
|
Signal Dir Width Description
|
|
========================== === ================================ ===================
|
|
data_dma_ram_wr_cmd_sel in RAM_SEG_COUNT*RAM_SEL_WIDTH Write command select
|
|
data_dma_ram_wr_cmd_be in RAM_SEG_COUNT*RAM_SEG_BE_WIDTH Write command byte enable
|
|
data_dma_ram_wr_cmd_addr in RAM_SEG_COUNT*RAM_SEG_ADDR_WIDTH Write command address
|
|
data_dma_ram_wr_cmd_data in RAM_SEG_COUNT*RAM_SEG_DATA_WIDTH Write command data
|
|
data_dma_ram_wr_cmd_valid in RAM_SEG_COUNT Write command valid
|
|
data_dma_ram_wr_cmd_ready out RAM_SEG_COUNT Write command ready
|
|
data_dma_ram_wr_done out RAM_SEG_COUNT Write done
|
|
data_dma_ram_rd_cmd_sel in RAM_SEG_COUNT*RAM_SEL_WIDTH Read command select
|
|
data_dma_ram_rd_cmd_addr in RAM_SEG_COUNT*RAM_SEG_ADDR_WIDTH Read command address
|
|
data_dma_ram_rd_cmd_valid in RAM_SEG_COUNT Read command valid
|
|
data_dma_ram_rd_cmd_ready out RAM_SEG_COUNT Read command ready
|
|
data_dma_ram_rd_resp_data out RAM_SEG_COUNT*RAM_SEG_DATA_WIDTH Read response data
|
|
data_dma_ram_rd_resp_valid out RAM_SEG_COUNT Read response valid
|
|
data_dma_ram_rd_resp_ready in RAM_SEG_COUNT Read response ready
|
|
========================== === ================================ ===================
|
|
|
|
.. object:: ptp
|
|
|
|
PTP clock connections.
|
|
|
|
.. table::
|
|
|
|
================= === ================ ===================
|
|
Signal Dir Width Description
|
|
================= === ================ ===================
|
|
ptp_clk in 1 PTP clock
|
|
ptp_rst in 1 PTP reset
|
|
ptp_sample_clk in 1 PTP sample clock
|
|
ptp_pps in 1 PTP pulse-per-second (synchronous to ptp_clk)
|
|
ptp_ts_96 in PTP_TS_WIDTH current PTP time (synchronous to ptp_clk)
|
|
ptp_ts_step in 1 PTP clock step (synchronous to ptp_clk)
|
|
ptp_sync_pps in 1 PTP pulse-per-second (synchronous to clk)
|
|
ptp_sync_ts_96 in PTP_TS_WIDTH current PTP time (synchronous to clk)
|
|
ptp_sync_ts_step in 1 PTP clock step (synchronous to clk)
|
|
ptp_perout_locked in PTP_PEROUT_COUNT PTP period output locked
|
|
ptp_perout_error in PTP_PEROUT_COUNT PTP period output error
|
|
ptp_perout_pulse in PTP_PEROUT_COUNT PTP period output pulse
|
|
================= === ================ ===================
|
|
|
|
.. object:: direct_tx_clk
|
|
|
|
Transmit clocks for direct asynchronous streaming interfaces, one per port
|
|
|
|
.. table::
|
|
|
|
============= === ========== ==================
|
|
Signal Dir Width Description
|
|
============= === ========== ==================
|
|
direct_tx_clk in PORT_COUNT Transmit clock
|
|
============= === ========== ==================
|
|
|
|
.. object:: direct_tx_rst
|
|
|
|
Transmit resets for direct asynchronous streaming interfaces, one per port
|
|
|
|
.. table::
|
|
|
|
============= === ========== ==================
|
|
Signal Dir Width Description
|
|
============= === ========== ==================
|
|
direct_tx_rst in PORT_COUNT Transmit reset
|
|
============= === ========== ==================
|
|
|
|
.. object:: s_axis_direct_tx
|
|
|
|
Streaming transmit data from host, one AXI stream interface per port. Lowest latency interface, synchronous with transmit clock.
|
|
|
|
.. table::
|
|
|
|
======================= === ============================= ==================
|
|
Signal Dir Width Description
|
|
======================= === ============================= ==================
|
|
s_axis_direct_tx_tdata in PORT_COUNT*AXIS_DATA_WIDTH Streaming data
|
|
s_axis_direct_tx_tkeep in PORT_COUNT*AXIS_KEEP_WIDTH Byte enable
|
|
s_axis_direct_tx_tvalid in PORT_COUNT Data valid
|
|
s_axis_direct_tx_tready out PORT_COUNT Ready for data
|
|
s_axis_direct_tx_tlast in PORT_COUNT End of frame
|
|
s_axis_direct_tx_tuser in PORT_COUNT*AXIS_TX_USER_WIDTH Sideband data
|
|
======================= === ============================= ==================
|
|
|
|
``s_axis_direct_tx_tuser`` bits, per port
|
|
|
|
.. table::
|
|
|
|
=============== ========= ============= =============
|
|
Bit Name Width Description
|
|
=============== ========= ============= =============
|
|
0 bad_frame 1 Invalid frame
|
|
TX_TAG_WIDTH:1 tx_tag TX_TAG_WIDTH Transmit tag
|
|
=============== ========= ============= =============
|
|
|
|
.. object:: m_axis_direct_tx
|
|
|
|
Streaming transmit data towards network, one AXI stream interface per port. Lowest latency interface, synchronous with transmit clock.
|
|
|
|
.. table::
|
|
|
|
======================= === ============================= ==================
|
|
Signal Dir Width Description
|
|
======================= === ============================= ==================
|
|
m_axis_direct_tx_tdata out PORT_COUNT*AXIS_DATA_WIDTH Streaming data
|
|
m_axis_direct_tx_tkeep out PORT_COUNT*AXIS_KEEP_WIDTH Byte enable
|
|
m_axis_direct_tx_tvalid out PORT_COUNT Data valid
|
|
m_axis_direct_tx_tready in PORT_COUNT Ready for data
|
|
m_axis_direct_tx_tlast out PORT_COUNT End of frame
|
|
m_axis_direct_tx_tuser out PORT_COUNT*AXIS_TX_USER_WIDTH Sideband data
|
|
======================= === ============================= ==================
|
|
|
|
``m_axis_direct_tx_tuser`` bits, per port
|
|
|
|
.. table::
|
|
|
|
=============== ========= ============= =============
|
|
Bit Name Width Description
|
|
=============== ========= ============= =============
|
|
0 bad_frame 1 Invalid frame
|
|
TX_TAG_WIDTH:1 tx_tag TX_TAG_WIDTH Transmit tag
|
|
=============== ========= ============= =============
|
|
|
|
.. object:: s_axis_direct_tx_cpl
|
|
|
|
Transmit PTP timestamp from MAC, one AXI stream interface per port.
|
|
|
|
.. table::
|
|
|
|
============================= === ======================== ===================
|
|
Signal Dir Width Description
|
|
============================= === ======================== ===================
|
|
s_axis_direct_tx_cpl_ts in PORT_COUNT*PTP_TS_WIDTH PTP timestamp
|
|
s_axis_direct_tx_cpl_tag in PORT_COUNT*TX_TAG_WIDTH Transmit tag
|
|
s_axis_direct_tx_cpl_valid in PORT_COUNT Transmit completion valid
|
|
s_axis_direct_tx_cpl_ready out PORT_COUNT Transmit completion ready
|
|
============================= === ======================== ===================
|
|
|
|
.. object:: m_axis_direct_tx_cpl
|
|
|
|
Transmit PTP timestamp towards core logic, one AXI stream interface per port.
|
|
|
|
.. table::
|
|
|
|
============================= === ======================== ===================
|
|
Signal Dir Width Description
|
|
============================= === ======================== ===================
|
|
s_axis_direct_tx_cpl_ts out PORT_COUNT*PTP_TS_WIDTH PTP timestamp
|
|
s_axis_direct_tx_cpl_tag out PORT_COUNT*TX_TAG_WIDTH Transmit tag
|
|
s_axis_direct_tx_cpl_valid out PORT_COUNT Transmit completion valid
|
|
s_axis_direct_tx_cpl_ready in PORT_COUNT Transmit completion ready
|
|
============================= === ======================== ===================
|
|
|
|
.. object:: direct_rx_clk
|
|
|
|
Receive clocks for direct asynchronous streaming interfaces, one per port
|
|
|
|
.. table::
|
|
|
|
============= === ========== ==================
|
|
Signal Dir Width Description
|
|
============= === ========== ==================
|
|
direct_rx_clk in PORT_COUNT Receive clock
|
|
============= === ========== ==================
|
|
|
|
.. object:: direct_rx_rst
|
|
|
|
Receive resets for direct asynchronous streaming interfaces, one per port
|
|
|
|
.. table::
|
|
|
|
============= === ========== ==================
|
|
Signal Dir Width Description
|
|
============= === ========== ==================
|
|
direct_rx_rst in PORT_COUNT Receive reset
|
|
============= === ========== ==================
|
|
|
|
.. object:: s_axis_direct_rx
|
|
|
|
Streaming receive data from network, one AXI stream interface per port. Lowest latency interface, synchronous with receive clock.
|
|
|
|
.. table::
|
|
|
|
======================= === ============================= ==================
|
|
Signal Dir Width Description
|
|
======================= === ============================= ==================
|
|
s_axis_direct_rx_tdata in PORT_COUNT*AXIS_DATA_WIDTH Streaming data
|
|
s_axis_direct_rx_tkeep in PORT_COUNT*AXIS_KEEP_WIDTH Byte enable
|
|
s_axis_direct_rx_tvalid in PORT_COUNT Data valid
|
|
s_axis_direct_rx_tready out PORT_COUNT Ready for data
|
|
s_axis_direct_rx_tlast in PORT_COUNT End of frame
|
|
s_axis_direct_rx_tuser in PORT_COUNT*AXIS_RX_USER_WIDTH Sideband data
|
|
======================= === ============================= ==================
|
|
|
|
``s_axis_direct_rx_tuser`` bits, per port
|
|
|
|
.. table::
|
|
|
|
=============== ========= ============= =============
|
|
Bit Name Width Description
|
|
=============== ========= ============= =============
|
|
0 bad_frame 1 Invalid frame
|
|
PTP_TS_WIDTH:1 ptp_ts PTP_TS_WIDTH PTP timestamp
|
|
=============== ========= ============= =============
|
|
|
|
.. object:: m_axis_direct_rx
|
|
|
|
Streaming receive data towards host, one AXI stream interface per port. Lowest latency interface, synchronous with receive clock.
|
|
|
|
.. table::
|
|
|
|
======================= === ============================= ==================
|
|
Signal Dir Width Description
|
|
======================= === ============================= ==================
|
|
m_axis_direct_rx_tdata out PORT_COUNT*AXIS_DATA_WIDTH Streaming data
|
|
m_axis_direct_rx_tkeep out PORT_COUNT*AXIS_KEEP_WIDTH Byte enable
|
|
m_axis_direct_rx_tvalid out PORT_COUNT Data valid
|
|
m_axis_direct_rx_tready in PORT_COUNT Ready for data
|
|
m_axis_direct_rx_tlast out PORT_COUNT End of frame
|
|
m_axis_direct_rx_tuser out PORT_COUNT*AXIS_RX_USER_WIDTH Sideband data
|
|
======================= === ============================= ==================
|
|
|
|
``m_axis_direct_rx_tuser`` bits, per port
|
|
|
|
.. table::
|
|
|
|
=============== ========= ============= =============
|
|
Bit Name Width Description
|
|
=============== ========= ============= =============
|
|
0 bad_frame 1 Invalid frame
|
|
PTP_TS_WIDTH:1 ptp_ts PTP_TS_WIDTH PTP timestamp
|
|
=============== ========= ============= =============
|
|
|
|
.. object:: s_axis_sync_tx
|
|
|
|
Streaming transmit data from host, one AXI stream interface per port. Low latency interface, synchronous with core clock.
|
|
|
|
.. table::
|
|
|
|
===================== === ================================== ==================
|
|
Signal Dir Width Description
|
|
===================== === ================================== ==================
|
|
s_axis_sync_tx_tdata in PORT_COUNT*AXIS_SYNC_DATA_WIDTH Streaming data
|
|
s_axis_sync_tx_tkeep in PORT_COUNT*AXIS_SYNC_KEEP_WIDTH Byte enable
|
|
s_axis_sync_tx_tvalid in PORT_COUNT Data valid
|
|
s_axis_sync_tx_tready out PORT_COUNT Ready for data
|
|
s_axis_sync_tx_tlast in PORT_COUNT End of frame
|
|
s_axis_sync_tx_tuser in PORT_COUNT*AXIS_SYNC_TX_USER_WIDTH Sideband data
|
|
===================== === ================================== ==================
|
|
|
|
``s_axis_sync_tx_tuser`` bits, per port
|
|
|
|
.. table::
|
|
|
|
=============== ========= ============= =============
|
|
Bit Name Width Description
|
|
=============== ========= ============= =============
|
|
0 bad_frame 1 Invalid frame
|
|
TX_TAG_WIDTH:1 tx_tag TX_TAG_WIDTH Transmit tag
|
|
=============== ========= ============= =============
|
|
|
|
.. object:: m_axis_sync_tx
|
|
|
|
Streaming transmit data towards network, one AXI stream interface per port. Low latency interface, synchronous with core clock.
|
|
|
|
.. table::
|
|
|
|
===================== === ================================== ==================
|
|
Signal Dir Width Description
|
|
===================== === ================================== ==================
|
|
m_axis_sync_tx_tdata out PORT_COUNT*AXIS_SYNC_DATA_WIDTH Streaming data
|
|
m_axis_sync_tx_tkeep out PORT_COUNT*AXIS_SYNC_KEEP_WIDTH Byte enable
|
|
m_axis_sync_tx_tvalid out PORT_COUNT Data valid
|
|
m_axis_sync_tx_tready in PORT_COUNT Ready for data
|
|
m_axis_sync_tx_tlast out PORT_COUNT End of frame
|
|
m_axis_sync_tx_tuser out PORT_COUNT*AXIS_SYNC_TX_USER_WIDTH Sideband data
|
|
===================== === ================================== ==================
|
|
|
|
``m_axis_sync_tx_tuser`` bits, per port
|
|
|
|
.. table::
|
|
|
|
=============== ========= ============= =============
|
|
Bit Name Width Description
|
|
=============== ========= ============= =============
|
|
0 bad_frame 1 Invalid frame
|
|
TX_TAG_WIDTH:1 tx_tag TX_TAG_WIDTH Transmit tag
|
|
=============== ========= ============= =============
|
|
|
|
.. object:: s_axis_sync_tx_cpl
|
|
|
|
Transmit PTP timestamp from MAC, one AXI stream interface per port.
|
|
|
|
.. table::
|
|
|
|
=========================== === ======================== ===================
|
|
Signal Dir Width Description
|
|
=========================== === ======================== ===================
|
|
s_axis_sync_tx_cpl_ts in PORT_COUNT*PTP_TS_WIDTH PTP timestamp
|
|
s_axis_sync_tx_cpl_tag in PORT_COUNT*TX_TAG_WIDTH Transmit tag
|
|
s_axis_sync_tx_cpl_valid in PORT_COUNT Transmit completion valid
|
|
s_axis_sync_tx_cpl_ready out PORT_COUNT Transmit completion ready
|
|
=========================== === ======================== ===================
|
|
|
|
.. object:: m_axis_sync_tx_cpl
|
|
|
|
Transmit PTP timestamp towards core logic, one AXI stream interface per port.
|
|
|
|
.. table::
|
|
|
|
=========================== === ======================== ===================
|
|
Signal Dir Width Description
|
|
=========================== === ======================== ===================
|
|
s_axis_sync_tx_cpl_ts out PORT_COUNT*PTP_TS_WIDTH PTP timestamp
|
|
s_axis_sync_tx_cpl_tag out PORT_COUNT*TX_TAG_WIDTH Transmit tag
|
|
s_axis_sync_tx_cpl_valid out PORT_COUNT Transmit completion valid
|
|
s_axis_sync_tx_cpl_ready in PORT_COUNT Transmit completion ready
|
|
=========================== === ======================== ===================
|
|
|
|
.. object:: s_axis_sync_rx
|
|
|
|
Streaming receive data from network, one AXI stream interface per port. Low latency interface, synchronous with core clock.
|
|
|
|
.. table::
|
|
|
|
===================== === ================================== ==================
|
|
Signal Dir Width Description
|
|
===================== === ================================== ==================
|
|
s_axis_sync_rx_tdata in PORT_COUNT*AXIS_SYNC_DATA_WIDTH Streaming data
|
|
s_axis_sync_rx_tkeep in PORT_COUNT*AXIS_SYNC_KEEP_WIDTH Byte enable
|
|
s_axis_sync_rx_tvalid in PORT_COUNT Data valid
|
|
s_axis_sync_rx_tready out PORT_COUNT Ready for data
|
|
s_axis_sync_rx_tlast in PORT_COUNT End of frame
|
|
s_axis_sync_rx_tuser in PORT_COUNT*AXIS_SYNC_RX_USER_WIDTH Sideband data
|
|
===================== === ================================== ==================
|
|
|
|
``s_axis_sync_rx_tuser`` bits, per port
|
|
|
|
.. table::
|
|
|
|
=============== ========= ============= =============
|
|
Bit Name Width Description
|
|
=============== ========= ============= =============
|
|
0 bad_frame 1 Invalid frame
|
|
PTP_TS_WIDTH:1 ptp_ts PTP_TS_WIDTH PTP timestamp
|
|
=============== ========= ============= =============
|
|
|
|
.. object:: m_axis_sync_rx
|
|
|
|
Streaming receive data towards host, one AXI stream interface per port. Low latency interface, synchronous with core clock.
|
|
|
|
.. table::
|
|
|
|
===================== === ================================== ==================
|
|
Signal Dir Width Description
|
|
===================== === ================================== ==================
|
|
m_axis_sync_rx_tdata out PORT_COUNT*AXIS_SYNC_DATA_WIDTH Streaming data
|
|
m_axis_sync_rx_tkeep out PORT_COUNT*AXIS_SYNC_KEEP_WIDTH Byte enable
|
|
m_axis_sync_rx_tvalid out PORT_COUNT Data valid
|
|
m_axis_sync_rx_tready in PORT_COUNT Ready for data
|
|
m_axis_sync_rx_tlast out PORT_COUNT End of frame
|
|
m_axis_sync_rx_tuser out PORT_COUNT*AXIS_SYNC_RX_USER_WIDTH Sideband data
|
|
===================== === ================================== ==================
|
|
|
|
``m_axis_sync_rx_tuser`` bits, per port
|
|
|
|
.. table::
|
|
|
|
=============== ========= ============= =============
|
|
Bit Name Width Description
|
|
=============== ========= ============= =============
|
|
0 bad_frame 1 Invalid frame
|
|
PTP_TS_WIDTH:1 ptp_ts PTP_TS_WIDTH PTP timestamp
|
|
=============== ========= ============= =============
|
|
|
|
.. object:: s_axis_if_tx
|
|
|
|
Streaming transmit data from host, one AXI stream interface per interface. Closest interface to host, synchronous with core clock.
|
|
|
|
.. table::
|
|
|
|
=================== === ================================ ==================
|
|
Signal Dir Width Description
|
|
=================== === ================================ ==================
|
|
s_axis_if_tx_tdata in PORT_COUNT*AXIS_IF_DATA_WIDTH Streaming data
|
|
s_axis_if_tx_tkeep in PORT_COUNT*AXIS_IF_KEEP_WIDTH Byte enable
|
|
s_axis_if_tx_tvalid in PORT_COUNT Data valid
|
|
s_axis_if_tx_tready out PORT_COUNT Ready for data
|
|
s_axis_if_tx_tlast in PORT_COUNT End of frame
|
|
s_axis_if_tx_tid in PORT_COUNT*AXIS_IF_TX_ID_WIDTH Source queue
|
|
s_axis_if_tx_tdest in PORT_COUNT*AXIS_IF_TX_DEST_WIDTH Destination port
|
|
s_axis_if_tx_tuser in PORT_COUNT*AXIS_IF_TX_USER_WIDTH Sideband data
|
|
=================== === ================================ ==================
|
|
|
|
``s_axis_if_tx_tuser`` bits, per interface
|
|
|
|
.. table::
|
|
|
|
=============== ========= ============= =============
|
|
Bit Name Width Description
|
|
=============== ========= ============= =============
|
|
0 bad_frame 1 Invalid frame
|
|
TX_TAG_WIDTH:1 tx_tag TX_TAG_WIDTH Transmit tag
|
|
=============== ========= ============= =============
|
|
|
|
.. object:: m_axis_if_tx
|
|
|
|
Streaming transmit data towards network, one AXI stream interface per interface. Closest interface to host, synchronous with core clock.
|
|
|
|
.. table::
|
|
|
|
=================== === ================================ ==================
|
|
Signal Dir Width Description
|
|
=================== === ================================ ==================
|
|
m_axis_if_tx_tdata out PORT_COUNT*AXIS_IF_DATA_WIDTH Streaming data
|
|
m_axis_if_tx_tkeep out PORT_COUNT*AXIS_IF_KEEP_WIDTH Byte enable
|
|
m_axis_if_tx_tvalid out PORT_COUNT Data valid
|
|
m_axis_if_tx_tready in PORT_COUNT Ready for data
|
|
m_axis_if_tx_tlast out PORT_COUNT End of frame
|
|
m_axis_if_tx_tid out PORT_COUNT*AXIS_IF_TX_ID_WIDTH Source queue
|
|
m_axis_if_tx_tdest out PORT_COUNT*AXIS_IF_TX_DEST_WIDTH Destination port
|
|
m_axis_if_tx_tuser out PORT_COUNT*AXIS_IF_TX_USER_WIDTH Sideband data
|
|
=================== === ================================ ==================
|
|
|
|
``m_axis_if_tx_tuser`` bits, per interface
|
|
|
|
.. table::
|
|
|
|
=============== ========= ============= =============
|
|
Bit Name Width Description
|
|
=============== ========= ============= =============
|
|
0 bad_frame 1 Invalid frame
|
|
TX_TAG_WIDTH:1 tx_tag TX_TAG_WIDTH Transmit tag
|
|
=============== ========= ============= =============
|
|
|
|
.. object:: s_axis_if_tx_cpl
|
|
|
|
Transmit PTP timestamp from MAC, one AXI stream interface per interface.
|
|
|
|
.. table::
|
|
|
|
========================= === ======================== ===================
|
|
Signal Dir Width Description
|
|
========================= === ======================== ===================
|
|
s_axis_if_tx_cpl_ts in PORT_COUNT*PTP_TS_WIDTH PTP timestamp
|
|
s_axis_if_tx_cpl_tag in PORT_COUNT*TX_TAG_WIDTH Transmit tag
|
|
s_axis_if_tx_cpl_valid in PORT_COUNT Transmit completion valid
|
|
s_axis_if_tx_cpl_ready out PORT_COUNT Transmit completion ready
|
|
========================= === ======================== ===================
|
|
|
|
.. object:: m_axis_if_tx_cpl
|
|
|
|
Transmit PTP timestamp towards core logic, one AXI stream interface per interface.
|
|
|
|
.. table::
|
|
|
|
========================= === ======================== ===================
|
|
Signal Dir Width Description
|
|
========================= === ======================== ===================
|
|
s_axis_if_tx_cpl_ts out PORT_COUNT*PTP_TS_WIDTH PTP timestamp
|
|
s_axis_if_tx_cpl_tag out PORT_COUNT*TX_TAG_WIDTH Transmit tag
|
|
s_axis_if_tx_cpl_valid out PORT_COUNT Transmit completion valid
|
|
s_axis_if_tx_cpl_ready in PORT_COUNT Transmit completion ready
|
|
========================= === ======================== ===================
|
|
|
|
.. object:: s_axis_if_rx
|
|
|
|
Streaming receive data from network, one AXI stream interface per interface. Closest interface to host, synchronous with core clock.
|
|
|
|
.. table::
|
|
|
|
=================== === ================================ ==================
|
|
Signal Dir Width Description
|
|
=================== === ================================ ==================
|
|
s_axis_if_rx_tdata in PORT_COUNT*AXIS_IF_DATA_WIDTH Streaming data
|
|
s_axis_if_rx_tkeep in PORT_COUNT*AXIS_IF_KEEP_WIDTH Byte enable
|
|
s_axis_if_rx_tvalid in PORT_COUNT Data valid
|
|
s_axis_if_rx_tready out PORT_COUNT Ready for data
|
|
s_axis_if_rx_tlast in PORT_COUNT End of frame
|
|
s_axis_if_rx_tid in PORT_COUNT*AXIS_IF_RX_ID_WIDTH Source port
|
|
s_axis_if_rx_tdest in PORT_COUNT*AXIS_IF_RX_DEST_WIDTH Destination queue
|
|
s_axis_if_rx_tuser in PORT_COUNT*AXIS_IF_RX_USER_WIDTH Sideband data
|
|
=================== === ================================ ==================
|
|
|
|
``s_axis_if_rx_tuser`` bits, per interface
|
|
|
|
.. table::
|
|
|
|
=============== ========= ============= =============
|
|
Bit Name Width Description
|
|
=============== ========= ============= =============
|
|
0 bad_frame 1 Invalid frame
|
|
PTP_TS_WIDTH:1 ptp_ts PTP_TS_WIDTH PTP timestamp
|
|
=============== ========= ============= =============
|
|
|
|
.. object:: m_axis_if_rx
|
|
|
|
Streaming receive data towards host, one AXI stream interface per interface. Closest interface to host, synchronous with core clock.
|
|
|
|
.. table::
|
|
|
|
=================== === ================================ ==================
|
|
Signal Dir Width Description
|
|
=================== === ================================ ==================
|
|
m_axis_if_rx_tdata out PORT_COUNT*AXIS_IF_DATA_WIDTH Streaming data
|
|
m_axis_if_rx_tkeep out PORT_COUNT*AXIS_IF_KEEP_WIDTH Byte enable
|
|
m_axis_if_rx_tvalid out PORT_COUNT Data valid
|
|
m_axis_if_rx_tready in PORT_COUNT Ready for data
|
|
m_axis_if_rx_tlast out PORT_COUNT End of frame
|
|
m_axis_if_rx_tid out PORT_COUNT*AXIS_IF_RX_ID_WIDTH Source port
|
|
m_axis_if_rx_tdest out PORT_COUNT*AXIS_IF_RX_DEST_WIDTH Destination queue
|
|
m_axis_if_rx_tuser out PORT_COUNT*AXIS_IF_RX_USER_WIDTH Sideband data
|
|
=================== === ================================ ==================
|
|
|
|
``m_axis_if_rx_tuser`` bits, per interface
|
|
|
|
.. table::
|
|
|
|
=============== ========= ============= =============
|
|
Bit Name Width Description
|
|
=============== ========= ============= =============
|
|
0 bad_frame 1 Invalid frame
|
|
PTP_TS_WIDTH:1 ptp_ts PTP_TS_WIDTH PTP timestamp
|
|
=============== ========= ============= =============
|
|
|
|
.. object:: m_axis_stat
|
|
|
|
Statistics increment output
|
|
|
|
.. table::
|
|
|
|
================== === ============== ===================
|
|
Signal Dir Width Description
|
|
================== === ============== ===================
|
|
m_axis_stat_tdata in STAT_INC_WIDTH Statistic increment
|
|
m_axis_stat_tid in STAT_ID_WIDTH Statistic ID
|
|
m_axis_stat_tvalid in 1 Statistic valid
|
|
m_axis_stat_tready out 1 Statistic ready
|
|
================== === ============== ===================
|
|
|
|
.. object:: gpio
|
|
|
|
Application section GPIO
|
|
|
|
.. table::
|
|
|
|
======== === ================== ===================
|
|
Signal Dir Width Description
|
|
======== === ================== ===================
|
|
gpio_in in APP_GPIO_IN_WIDTH GPIO inputs
|
|
gpio_out out APP_GPIO_OUT_WIDTH GPIO outputs
|
|
======== === ================== ===================
|
|
|
|
.. object:: jtag
|
|
|
|
Application section JTAG scan chain
|
|
|
|
.. table::
|
|
|
|
======== === ===== ===================
|
|
Signal Dir Width Description
|
|
======== === ===== ===================
|
|
jtag_tdi in 1 JTAG TDI
|
|
jtag_tdo out 1 JTAG TDO
|
|
jtag_tms in 1 JTAG TMS
|
|
jtag_tck in 1 JTAG TCK
|
|
======== === ===== ===================
|