from __future__ import generators

import sys
from random import randrange

from myhdl import Signal, Simulation, StopSimulation, \
                  intbv, delay, negedge, join

T_9600 = int(1e9 / 9600)
T_10200 = int(1e9 / 10200)

def rs232_tx(tx, data, duration=T_9600):
    
    """ Simple rs232 transmitter procedure.

    tx -- serial output data
    data -- input data byte to be transmitted
    duration -- transmit bit duration
    
    """
    
    print "-- Transmitting %s --" % hex(data)
    print "TX: start bit"      
    tx.next = 0
    yield delay(duration)

    for i in range(8):
        print "TX: %s" % data[i]
        tx.next = data[i]
        yield delay(duration)

    print "TX: stop bit"      
    tx.next = 1
    yield delay(duration)


MAX_TIMEOUT = sys.maxint
        
def rs232_rx(rx, data, duration=T_9600, timeout=MAX_TIMEOUT):
    
    """ Simple rs232 receiver procedure.

    rx -- serial input data
    data -- data received
    duration -- receive bit duration
    
    """

    # wait on start bit until timeout
    yield negedge(rx), delay(timeout)
    if rx == 1:
        raise StopSimulation, "RX time out error"

    # sample in the middle of the bit duration
    yield delay(duration // 2)
    print "RX: start bit"

    for i in range(8):
        yield delay(duration)
        print "RX: %s" % rx
        data[i] = rx

    yield delay(duration)
    print "RX: stop bit"
    print "-- Received %s --" % hex(data)


testvals = (0xc5, 0x3a, 0x4b)

def stimulus():
    tx = Signal(1)
    for val in testvals:
        txData = intbv(val)
        yield rs232_tx(tx, txData)

        
def test():
    tx = Signal(1)
    rx = tx
    rxData = intbv(0)
    for val in testvals:
        txData = intbv(val)
        yield rs232_rx(rx, rxData), rs232_tx(tx, txData)
    
def testTimeout():
    tx = Signal(1)
    rx = Signal(1)
    rxData = intbv(0)
    for val in testvals:
        txData = intbv(val)
        yield rs232_rx(rx, rxData, timeout=4*T_9600-1), rs232_tx(tx, txData)


def testNoJoin():
    tx = Signal(1)
    rx = tx
    rxData = intbv(0)
    for val in testvals:
        txData = intbv(val)
        yield rs232_rx(rx, rxData), rs232_tx(tx, txData, duration=T_10200)
        
def testJoin():
    tx = Signal(1)
    rx = tx
    rxData = intbv(0)
    for val in testvals:
        txData = intbv(val)
        yield join(rs232_rx(rx, rxData), rs232_tx(tx, txData, duration=T_10200))
    
def main():
    print "\n\n## stimulus ##\n"
    Simulation(stimulus()).run()
    print "\n\n## test ##\n" 
    Simulation(test()).run()
    print "\n\n## testTimeout ##\n"
    Simulation(testTimeout()).run()
    print "\n\n## testNoJoin ##\n"
    Simulation(testNoJoin()).run()
    print "\n\n## testJoin ##\n"
    Simulation(testJoin()).run()

if __name__ == '__main__':
    main()