oh/xilibs/hdl/IDELAYE2.v

module IDELAYE2 (/*AUTOARG*/
   // Outputs
   CNTVALUEOUT, DATAOUT,
   // Inputs
   C, CE, CINVCTRL, CNTVALUEIN, DATAIN, IDATAIN, INC, LD, LDPIPEEN,
   REGRST
   );

   parameter CINVCTRL_SEL = "FALSE";           // Enable dynamic clock inversion
   parameter DELAY_SRC = "IDATAIN";            // Delay input 
   parameter HIGH_PERFORMANCE_MODE  = "FALSE"; // Reduced jitter
   parameter IDELAY_TYPE  = "FIXED";           // Type of delay line
   parameter integer IDELAY_VALUE = 0;         // Input delay tap setting
   parameter [0:0] IS_C_INVERTED = 1'b0;       // 
   parameter [0:0] IS_DATAIN_INVERTED = 1'b0;  //
   parameter [0:0] IS_IDATAIN_INVERTED = 1'b0; //
   parameter PIPE_SEL = "FALSE";               // Select pipelined mode
   parameter real    REFCLK_FREQUENCY = 200.0; // Ref clock frequency
   parameter SIGNAL_PATTERN    = "DATA";       // Input signal type

`ifdef XIL_TIMING
    parameter LOC = "UNPLACED";
    parameter integer SIM_DELAY_D = 0;
    localparam DELAY_D = (IDELAY_TYPE == "VARIABLE") ? SIM_DELAY_D : 0;
`endif // ifdef XIL_TIMING

`ifndef XIL_TIMING
    integer DELAY_D=0;
`endif // ifndef XIL_TIMING

   output [4:0] CNTVALUEOUT; // count value for monitoring tap value
   output 	DATAOUT;     // delayed data
   input 	C;           // clock input for variable mode
   input 	CE;          // enable increment/decrement function
   input 	CINVCTRL;    // dynamically inverts clock polarity
   input [4:0] 	CNTVALUEIN;  // counter value for tap delay
   input 	DATAIN;      // data input from FGPA logic
   input 	IDATAIN;     // data input from IBUF
   input 	INC;         // increment tap delay
   input 	LD;          // loads the delay primitive
   input 	LDPIPEEN;    // enables the pipeline register delay 
   input 	REGRST;      // reset for pipeline register

   assign DATAOUT = IDATAIN;

   initial
     begin
	$display("Delay %d %m",IDELAY_VALUE);	
     end
endmodule // IDELAYE2