- reset was broken!
- need to account for wait
- merging read/write wait for simplicity, otherwise you would need to reset the packets to figure out if it's a read or write transaction...and I don't want to reset every packet throughout the pipe.
- holding rx in reset state until tx is done
- removing reset from all pipeline registers
- removing reset from oddr/iddr
- the idea is to keep things quiet not to block in lots of places. The only real block needed is in the FIFO to keep "noise" from propagating past the link. The link should be kept in a safe reset state until the rx fram is stable and the clock is running so that the pipe can be cleaned out.
* Seems like a useless feature. Why autogenerate the transactions at the transmit side. This should always be done at the receive side to minimize bits moving across the link. Can't really see a use for it anymore so I am removing it.
* If you want to hack the design to reduce latency, you can always grab the raw etx_core and drive signals directly through write port.
* May consider adding a fourth port to etx to allow bypassing the link interfac?
* Add an ifdef to bypass the fifos?
