Andreas Olofsson
89286af8a9
Adding documentation of elink protocol
2015-04-26 23:02:13 -04:00
Andreas Olofsson
f7aef66f29
Bug fix: erx pipeline misalignment
...
-access signal happens one signal after empty goes low to compensate for fifo data latency
-verify that this is how the Xilinx FIFO works as well.
2015-04-26 08:31:36 -04:00
Andreas Olofsson
21f87edd87
Memory bug fix
...
-srcaddr (upper data of read response) was using input instead of output data
-blocking upper data on 32 bit reads and smaller (quieter..)
Need random DV to flush out these silly bugs...
2015-04-26 08:29:50 -04:00
Andreas Olofsson
afd6e86840
Fixing etx pipeline
...
-Fixed one bug inserted during edits, causing double transactions
-Added pipeline stall logic to all units
2015-04-25 23:28:52 -04:00
Andreas Olofsson
ca835b9607
tweaking register map again...
2015-04-25 23:28:18 -04:00
Andreas Olofsson
5f595a75d3
Register write bug for new map
...
-Need to block access if [15] is one (reserved for emmurx)
2015-04-25 07:10:13 -04:00
Andreas Olofsson
919a5fa5e8
Register map twiddles
...
-Fixed test to correspond to new map
2015-04-25 07:09:52 -04:00
Andreas Olofsson
c0d8c967c4
Address remapping integration
...
Integrated remapping logic (compiles)
Starting debug tomorrow...
2015-04-24 17:39:05 -04:00
Andreas Olofsson
be42ea3b89
Register map change
...
-Changed register map
-Splitting into groups, more natural
2015-04-24 17:38:01 -04:00
Andreas Olofsson
ea7683693c
Adding RX/TX address remapping
...
The MMU is a monster and may be too much
Adding simple remapping modules
Covers todays feature and then some
1.) Static remapping
2.) Addresss compression
2015-04-24 17:29:05 -04:00
Andreas Olofsson
b25ad633f7
Readback cleanup
...
RX/TX interfaces should be mininmized and standalone
Adding mux to consolidate to one "dout"
2015-04-24 17:27:35 -04:00
Andreas Olofsson
3b637e55f0
MILESTONE: Design once again passes test
...
New features:
DMA
MAILBOX directly in RX path
TXMMU
2015-04-23 23:16:03 -04:00
Andreas Olofsson
0ed6afeac9
Added tag and group for read response
...
-Still not sure about this..
2015-04-23 23:14:39 -04:00
Andreas Olofsson
46896c63ef
Bug fix, adding reset signal
...
This will blocking when there is no clock at startup.
2015-04-23 23:13:05 -04:00
Andreas Olofsson
24fc91072d
Adding IDs to keep access signals straight
2015-04-23 23:11:58 -04:00
Andreas Olofsson
01fec0f72a
Fixed elink missind ID parameter
2015-04-23 20:07:52 -04:00
Andreas Olofsson
5c8fb41849
Fifo read bug
...
-fifo should be read when it's not empty and there is no wait pushback
2015-04-23 20:07:10 -04:00
Andreas Olofsson
c4c1edc10f
Adding reset to critical signals in pipe
2015-04-23 20:06:11 -04:00
Andreas Olofsson
7ab3b3a8f8
Fixed floating net bug
2015-04-23 20:05:00 -04:00
Andreas Olofsson
0f0ff55928
Verilator based lint cleanup
2015-04-23 18:57:55 -04:00
Andreas Olofsson
155f6a9401
File cleanup
2015-04-23 18:10:07 -04:00
Andreas Olofsson
842dd60b3e
Adding DMA register to regmap
2015-04-23 18:08:52 -04:00
Andreas Olofsson
c76bce1ea3
Changing so basic elink unti is without AXI
2015-04-23 18:08:20 -04:00
Andreas Olofsson
fcf5bf010f
Splitting register file into separate pieces
2015-04-23 18:07:50 -04:00
Andreas Olofsson
ec0c9ce835
Changing to packet interface
2015-04-23 18:07:27 -04:00
Andreas Olofsson
ed0b8c2539
Major RX change:
...
-renamed interfaces to rxwr,rxrd,rxrr (much simpler to remember for me)
-packet interface change
-removed wait signals from dataout field
-added dma, emmu, mailbox, config register
-instantiating fifo_sync raw (without wrapper)
2015-04-23 18:04:39 -04:00
Andreas Olofsson
2707541eab
Adding DMA source and changing interface
...
-DMA added as a master driving out transactions
(this is going to be great!!)
-Changing to packet interface
2015-04-23 18:03:10 -04:00
Andreas Olofsson
842a6d894a
Fixing enable/reset:
...
-Removing enable from ISERDES, not healthy
-Moving all logic to protocol block. (this is an IO block)
-Removing tow redundant pipeline stages (check this??)
2015-04-23 18:01:19 -04:00
Andreas Olofsson
7418d45f5e
Cleanup
...
-Packet interface change
-Adding RX enable logic with synchronizer (better place than erx_io)
2015-04-23 17:59:36 -04:00
Andreas Olofsson
d9525b6ae4
Major upgrade
...
-Adding DMA, EMMU, CFG
-Removing redundant signals
-Changing to packet interface
2015-04-23 17:58:18 -04:00
Andreas Olofsson
9a614d1094
Packet interface change
2015-04-23 17:57:24 -04:00
Andreas Olofsson
44f162ec09
Packet interface change
...
-Changed packet interface
-Removed rd/wr from block, was pass through
2015-04-23 17:56:15 -04:00
Andreas Olofsson
1e1644138e
Splitting register file (rx,tx,base)
...
The goal is to have 100% independence in RX and TX pipes
2015-04-23 17:50:45 -04:00
Andreas Olofsson
cc5f165454
Clarified lclk names
2015-04-22 15:03:24 -04:00
Andreas Olofsson
703da8445b
deleted junk
2015-04-22 15:02:31 -04:00
Andreas Olofsson
797d836a02
Renaming constants file
2015-04-22 13:56:48 -04:00
Andreas Olofsson
275264c84d
Reorg
2015-04-21 21:33:49 -04:00
Andreas Olofsson
035b3c9ba5
Milestone: WRITE AND READ FROM HOST WORKS!
2015-04-21 17:16:20 -04:00
Andreas Olofsson
d0b04687ea
Bug fix, missing pipeline stage on read response
...
-Apparantly old FIFO was not pipelined (IE data comes back same cycle).
-Not knowing the Xilinx logic, I made it a regular one cycle pipeline
memory based FIFO
2015-04-21 17:14:30 -04:00
Andreas Olofsson
0d42736914
Implemented enesh memory
...
-not parametrized
-keeping 64 bit wide for now
2015-04-21 17:13:09 -04:00
Andreas Olofsson
2369e92ffa
Bug fix, missing "data hold" stage
...
Hadn't realized that the data needed to be held
Need to look at this logic again!
For now going back to old logic
2015-04-21 17:10:51 -04:00
Andreas Olofsson
e033e233d0
Integrating emesh memory module
...
-This will flush out the final read response path
2015-04-20 23:07:13 -04:00
Andreas Olofsson
4c44c59079
Message box working...
...
-More testing needed!
2015-04-19 21:55:07 -04:00
Andreas Olofsson
7c93c565e9
Adding back awid, arid, lock to AXI interface
2015-04-18 17:35:22 -04:00
Andreas Olofsson
9e931c47ec
Cleanup
2015-04-18 16:26:32 -04:00
Andreas Olofsson
f141a0e320
Clock cleanup
...
-Adding enable signal to clock out. Definitely right decision to keep
separate bit from the divider field.
-Fixed settings for to fit new register field
-XILINX version is still broken!!
2015-04-18 16:24:26 -04:00
Andreas Olofsson
b30dbe6005
Fixed to fit with new register map
2015-04-18 16:23:35 -04:00
Andreas Olofsson
00a921b839
Changed register map
...
-Moved "groups" to E,D,C
-Changed names to EL* (shorter is better, clear enough)
-Moved order to fit logical operation during init
-Moved embox registers to MMR group
DONE!
2015-04-18 16:21:45 -04:00
Andreas Olofsson
27087fb736
ESAXI cleanup
...
-widen address bus to 32 bits
-blocking access to elink on ecfg access
-fixing decoding for embox
2015-04-18 16:18:41 -04:00
Andreas Olofsson
baf6cc5a62
Removed synchronizer on TXLCLK
2015-04-18 16:17:44 -04:00
