-Need to get into this again! (don't like this part of code still..)
-One lesson, if you are unsure of something leave the old code in comment...can save a lot of time.
- Clearing the "done" register with tx_burst. Kind of makes sense logically since while we are in burst mode we are not done.
- Still not 100% happy with this circuit, but there arent' a lot of lines of code left...
- But elink now passes 500 random burst transactions!!!
- Adding transaction counter to speed up debugging
- Clearing access signal on wait ("bubble")
- Adding back special propagation when there is a wait after io_wait.
- This is a pain in the ass and should never have been implemented in the first place!
- Burst information is contained in two places, once in the first byte being transmitted and once by the frame staying high
- This was done because there was a second special bursting mode where data is streamed into the same address, so bit[2] becomes a "command bit".
-Solved a speed path in synchronizing the wait signal, had to use the first edge signal fo the IO and the lclk_div4 for the core logic. It seems that the FPGA has a really hard time mixing clock domains, the routing delay between domains explodes
-Put in some special case logic for edge cases, like when there is a wait coming in from the IO and there is a wait from the IO. In that case, the packet gets sampled by the IO and not by the current logic.
-This needs to be cleaned up eventually, not clean enough but it's good enough for now.
- The burst signal was going fro lclk_div4 domain straight into the io high speed domain. There is quite a bit of logic on this signal. Instead of starting with false paths or multi cycle paths with firstedge, I changed the pipeline.
- The logic was a mess, causing me to go around in circles for days. In the end, by adding a missing sync circuit (duh!) between the fast and slow clock to align the edges and removing a redundant pipeline stage ("double") the nasty logic just fell away. Looks good now.
-Write bursts mostly works and design looks clean.
-one bug left to fix on streams of writes...
- The burst signal needs to be pipelined like everything else (0th order..)
- Don't look at write signal when pushing back wait...WILL GO BACK AND REVISIT THIS ONE LATER.
- Yeah, burst write test now passes!!!!
- Old design was not workable with bursting and long waits. The wait signal needs to be very carfully handled since it's asynchronous to the clock.
-The TX needs to be stopped quickly so the sync needs to be done at the high speed clock, not at div4 clock
-Since there are synchronizers here, there should be only one point of sync. This is not completely the case still, but I think??? it should be safe by constructiona at this point.
-bursting working at this point for writes!!!!!
- reduced frame fanout, removed clock gater in erx_io (improves speed path)
- driving constants on "wid signals" (proper)
- making lock signal 1 bit wide to remove warning
- moved backed to BUFIO for IDDR blocks
- Using the BUFIO makes another clock domain....FPGAs apparently hate clock domain crossings, avoid them at all cost.
- Now moving back to having on high speed clock domain for logic and DDR blocks, take care of IO alignment in software for TX and RX
- Also, fixed the io_wait path with logic...not sure what I was thinking there. Logic was trivial. The way it was,the io path was going straight into the FIFO as a wait.
- Giving a wait on every ack just doesn't make sense on the read port with a fifo there??
- Makes for a nasty combinatorial loop during integration.
- Test passes (but need to look into this more)
- Using new packet interface
- Adding active signal, indicating that link is ready. This way you don't need to guess when the link is ready (no magic constants)
- Removed register on por reset input to get rid of x on startup.
- reset was broken!
- need to account for wait
- merging read/write wait for simplicity, otherwise you would need to reset the packets to figure out if it's a read or write transaction...and I don't want to reset every packet throughout the pipe.
