###########################################################
# DEFINITIONS
###########################################################
set design parallella
set design axi_elink
set root "../../.."
set partname "xc7z020clg400-1"
set archive [concat $design.zip]
set report_dir  ./reports
set results_dir ./results
#Make this a list (+foreach)
set elink_ip_repo_dir ../../../elink/ip/xilinx
###########################################################
# CREATE PROJECT
###########################################################
create_project -force $design . -part $partname
set_property target_language Verilog [current_project]

###########################################################
# Create Report/Results Directory
###########################################################
if ![file exists $report_dir]  {file mkdir $report_dir}
if ![file exists $results_dir] {file mkdir $results_dir}

###########################################################
# Add eLink IP to IP Repository
###########################################################

set ip_repo_paths [get_property ip_repo_paths [current_project]]
set_property  ip_repo_paths  "$elink_ip_repo_dir $ip_repo_paths" [current_project]

update_ip_catalog

###########################################################
# Create Block Design
###########################################################
   
create_bd_design "system"

source ./parallella_elink_base_bd.tcl

validate_bd_design

###########################################################
# Write BD TCL (FOR STORAGE)
###########################################################

write_bd_tcl -force ${results_dir}/parallella_elink_base_bd.tcl

###########################################################
# Create HDL Wrapper (??)
###########################################################

make_wrapper -files [get_files C:/Parallella/ipi_parallella_elink_base/project_ipi/project_ipi.srcs/sources_1/bd/parallella_bd/parallella_bd.bd] -top
add_files -norecurse C:/Parallella/ipi_parallella_elink_base/project_ipi/project_ipi.srcs/sources_1/bd/parallella_bd/hdl/parallella_bd_wrapper.v
add_files -fileset constrs_1 -norecurse C:/Parallella/ipi_parallella_elink_base/sources/parallella_io.xdc
add_files -fileset constrs_1 -norecurse C:/Parallella/ipi_parallella_elink_base/sources/parallella_timing.xdc

# [IP_Flow 19-3298] Detected external port differences while upgrading IP 'fifo_async_104x16'. These changes may impact your design.

# [Synth 8-439] module 'erx_clocks' not found ["c:/Parallella/ipi_parallella_elink_base/project_ipi/project_ipi.srcs/sources_1/elink/hdl/erx.v":90]
# [Synth 8-439] module 'etx_clocks' not found ["c:/Parallella/ipi_parallella_elink_base/project_ipi/project_ipi.srcs/sources_1/elink/hdl/etx.v":92]
# -> Patched components.xml

# [BD 41-759] The input pins (listed below) are either not connected or do not have a source port, and they don't have a tie-off specified. 
# Please check your design and connect them if needed: 
# /axi_elink_0/s_axi_wid

# [IP_Flow 19-3298] Detected external port differences while upgrading IP 'fifo_async_104x16'. These changes may impact your design.

# [BD 41-759] The input pins (listed below) are either not connected or do not have a source port, and they don't have a tie-off specified. 
# Please check your design and connect them if needed: 
# /axi_elink_0/s_axi_wid

# [Designutils 20-1280] Could not find module 'fifo_async_104x16'. The XDC file c:/Parallella/ipi_parallella_elink_base/project_ipi/project_ipi.srcs/sources_1/xilibs/ip/fifo_async_104x16/fifo_async_104x16/fifo_async_104x16.xdc will not be read for any cell of this module.
# [Designutils 20-1280] Could not find module 'fifo_async_104x16'. The XDC file c:/Parallella/ipi_parallella_elink_base/project_ipi/project_ipi.srcs/sources_1/xilibs/ip/fifo_async_104x16/fifo_async_104x16/fifo_async_104x16_clocks.xdc will not be read for any cell of this module.


###########################################################
# Implement Design
###########################################################

#launch_runs synth_1
#wait_on_run synth_1
#launch_runs impl_1
#wait_on_run impl_1