/* ######################################################################## EPIPHANY eLink RX Protocol block ######################################################################## This block takes the parallel output of the input deserializers, locates valid frame transitions, and decodes the bytes into standard eMesh protocol (104-bit transactions). */ module erx_protocol (/*AUTOARG*/ // Outputs erx_access, erx_packet, remap_bypass, // Inputs reset, rx_enable, clk, rx_packet, rx_burst, rx_access ); parameter AW = 32; parameter DW = 32; parameter PW = 104; parameter ID = 0; // System reset input input reset; input rx_enable;//Enables receiver // Parallel interface, 8 eLink bytes at a time input clk; input [PW-1:0] rx_packet; input rx_burst; input rx_access; // Output to MMU / filter output erx_access; output [PW-1:0] erx_packet; output remap_bypass; //needed for remapping logic assign erx_access = rx_access; assign erx_packet[PW-1:0] = rx_packet[PW-1:0]; endmodule // erx_protocol // Local Variables: // verilog-library-directories:("." "../../common/hdl") // End: /* This file is part of the Parallella Project. Copyright (C) 2014 Adapteva, Inc. Contributed by Fred Huettig Contributed by Andreas Olofsson This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program (see the file COPYING). If not, see . */