/*
 ########################################################################
 EPIPHANY eMesh Arbiter
 ########################################################################
 
 This block takes three FIFO inputs (write, read request, read response),
 arbitrates between the active channels, and forwards the result on to
 the transmit channel.
 
 The arbitration order is (fixed, highest to lowest)
 1) host writes
 2) read requests from host
 3) read responses

 */

module etx_arbiter (/*AUTOARG*/
   // Outputs
   emwr_rd_en, emrq_rd_en, emrr_rd_en, e_tx_access, e_tx_write,
   e_tx_datamode, e_tx_ctrlmode, e_tx_dstaddr, e_tx_srcaddr,
   e_tx_data,
   // Inputs
   tx_lclk_par, reset, emwr_rd_data, emwr_empty, emrq_rd_data,
   emrq_empty, emrr_rd_data, emrr_empty, e_tx_rd_wait, e_tx_wr_wait,
   e_tx_ack
   );

   // tx clock
   input          tx_lclk_par;
   input          reset;
   
   // from write request FIFO (slave)
   input [103:0]  emwr_rd_data;
   output         emwr_rd_en;
   input          emwr_empty;
   
   // from read request fifo (slave port)
   input [103:0]  emrq_rd_data;
   output         emrq_rd_en;
   input          emrq_empty;
   
   // from read response FIFO (master port)
   input [103:0]  emrr_rd_data;
   output         emrr_rd_en;
   input          emrr_empty;

   // eMesh master port, to TX
   output         e_tx_access;
   output         e_tx_write;
   output [1:0]   e_tx_datamode;
   output [3:0]   e_tx_ctrlmode;
   output [31:0]  e_tx_dstaddr;
   output [31:0]  e_tx_srcaddr;
   output [31:0]  e_tx_data;
   input          e_tx_rd_wait;
   input          e_tx_wr_wait;

   // Ack from TX protocol module
   input          e_tx_ack;

   //regs
   reg            ready;
   reg [103:0]    fifo_data;

   //wires
   wire 	  rr_ready;
   wire 	  rq_ready;
   wire 	  wr_ready;
   wire           emrr_rd_en;
   wire 	  emrq_rd_en;
   wire 	  emwr_rd_en;


   //############
   //# Arbitrate & forward
   //############

   // priority-based ready signals
   assign     wr_ready = ~emwr_empty & ~e_tx_wr_wait;                        //highest
   assign     rq_ready = ~emrq_empty & ~e_tx_rd_wait & ~wr_ready;
   assign     rr_ready = ~emrr_empty & ~e_tx_wr_wait & ~wr_ready & ~rq_ready;//lowest
   
   // FIFO read enables, when we're idle or done with the current datum
   assign     emrr_rd_en = rr_ready & (~ready | e_tx_ack);
   assign     emrq_rd_en = rq_ready & (~ready | e_tx_ack);
   assign     emwr_rd_en = wr_ready & (~ready | e_tx_ack);
   
   always @ (posedge tx_lclk_par) begin
      if( reset ) begin

         ready     <= 1'b0;
         fifo_data <= 'd0;

      end else begin

         if( emrr_rd_en ) begin

            ready <= 1'b1;
            fifo_data <= emrr_rd_data;

         end else if( emrq_rd_en ) begin

            ready <= 1'b1;
            fifo_data <= emrq_rd_data;

         end else if( emwr_rd_en ) begin

            ready <= 1'b1;
            fifo_data <= emwr_rd_data;

         end else if( e_tx_ack ) begin

            ready <= 1'b0;

         end
      end // else: !if( reset )
   end // always @ (posedge clock)
      
   //#############################
   //# Break-out the emesh signals
   //#############################
   assign e_tx_access   = ready;
   assign e_tx_write    = fifo_data[1];
   assign e_tx_datamode = fifo_data[3:2];
   assign e_tx_ctrlmode = fifo_data[7:4];
   assign e_tx_dstaddr  = fifo_data[39:8];
   assign e_tx_data     = fifo_data[71:40];
   assign e_tx_srcaddr  = fifo_data[103:72];


endmodule // e_tx_arbiter

/*
  File: etx_arbiter.v
 
  This file is part of the Parallella Project.

  Copyright (C) 2014 Adapteva, Inc.
  Contributed by Fred Huettig <fred@adapteva.com>
  Contributed by Andreas Olofsson <andreas@adapteva.com>

  This program is free software: you can redistribute it and/or modify
  it under the terms of the GNU General Public License as published by
  the Free Software Foundation, either version 3 of the License, or
  (at your option) any later version.

  This program is distributed in the hope that it will be useful,
  but WITHOUT ANY WARRANTY; without even the implied warranty of
  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  GNU General Public License for more details.

  You should have received a copy of the GNU General Public License
  along with this program (see the file COPYING).  If not, see
  <http://www.gnu.org/licenses/>.
*/