// ----------------------------------------------------------------------
// Copyright (c) 2015, The Regents of the University of California All
// rights reserved.
// 
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions are
// met:
// 
//     * Redistributions of source code must retain the above copyright
//       notice, this list of conditions and the following disclaimer.
// 
//     * Redistributions in binary form must reproduce the above
//       copyright notice, this list of conditions and the following
//       disclaimer in the documentation and/or other materials provided
//       with the distribution.
// 
//     * Neither the name of The Regents of the University of California
//       nor the names of its contributors may be used to endorse or
//       promote products derived from this software without specific
//       prior written permission.
// 
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL REGENTS OF THE
// UNIVERSITY OF CALIFORNIA BE LIABLE FOR ANY DIRECT, INDIRECT,
// INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
// BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
// OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
// ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
// TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
// USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
// DAMAGE.
// ----------------------------------------------------------------------
//----------------------------------------------------------------------------
// Filename: tx_engine.v
// Version:             1.0
// Verilog Standard:    Verilog-2001
// Description: The tx_engine module takes a formatted header, number of alignment
// blanks and a payloa and concatenates all three (in that order) to form a
// packet. These packets must meet max-request, max-payload, and payload
// termination requirements (see Read Completion Boundary). The tx_engine does
// not check these requirements during operation, but may do so during simulation.
// This Engine is capable of operating at "line rate".
// Author:              Dustin Richmond (@darichmond)
//-----------------------------------------------------------------------------
`timescale 1ns/1ns
`include "trellis.vh" // Defines the user-facing signal widths.
module tx_engine
    #(parameter C_DATA_WIDTH = 128,
      parameter C_DEPTH_PACKETS = 10,
      parameter C_PIPELINE_INPUT = 1,
      parameter C_PIPELINE_OUTPUT = 0,
      parameter C_FORMATTER_DELAY = 1,
      parameter C_MAX_HDR_WIDTH  = 128,
      parameter C_MAX_PAYLOAD_DWORDS = 64,
      parameter C_VENDOR = "ALTERA"
      )
    (
     // Interface: Clocks
     input                                CLK,

     // Interface: Reset
     input                                RST_IN,

     // Interface: TX HDR
     input                                TX_HDR_VALID,
     input [C_MAX_HDR_WIDTH-1:0]          TX_HDR,
     input [`SIG_LEN_W-1:0]               TX_HDR_PAYLOAD_LEN,
     input [`SIG_NONPAY_W-1:0]            TX_HDR_NONPAY_LEN,
     input [`SIG_PACKETLEN_W-1:0]         TX_HDR_PACKET_LEN,
     input                                TX_HDR_NOPAYLOAD,
     output                               TX_HDR_READY,

     // Interface: TX_DATA
     input                                TX_DATA_VALID,
     input [C_DATA_WIDTH-1:0]             TX_DATA,
     input                                TX_DATA_START_FLAG,
     input [clog2s(C_DATA_WIDTH/32)-1:0]  TX_DATA_START_OFFSET,
     input                                TX_DATA_END_FLAG,
     input [clog2s(C_DATA_WIDTH/32)-1:0]  TX_DATA_END_OFFSET,
     output                               TX_DATA_READY,

     // Interface: TX_PKT
     input                                TX_PKT_READY,
     output [C_DATA_WIDTH-1:0]            TX_PKT,
     output                               TX_PKT_START_FLAG,
     output [clog2s(C_DATA_WIDTH/32)-1:0] TX_PKT_START_OFFSET,
     output                               TX_PKT_END_FLAG,
     output [clog2s(C_DATA_WIDTH/32)-1:0] TX_PKT_END_OFFSET,
     output                               TX_PKT_VALID
     );
    localparam C_PIPELINE_HDR_FIFO_INPUT = C_PIPELINE_INPUT;
    localparam C_PIPELINE_HDR_FIFO_OUTPUT = C_PIPELINE_OUTPUT;
    localparam C_PIPELINE_HDR_INPUT = C_PIPELINE_INPUT;
    localparam C_ACTUAL_HDR_FIFO_DEPTH = (1<<clog2s(C_DEPTH_PACKETS));
    localparam C_USE_COMPUTE_REG = 1;
    localparam C_USE_READY_REG = 1;
    localparam C_USE_FWFT_HDR_FIFO = 1;
    localparam C_DATA_FIFO_DEPTH = C_ACTUAL_HDR_FIFO_DEPTH + C_FORMATTER_DELAY + 
                                   C_PIPELINE_HDR_FIFO_INPUT + C_PIPELINE_HDR_FIFO_OUTPUT + C_USE_FWFT_HDR_FIFO + // Header Fifo
                                   C_PIPELINE_HDR_INPUT + C_USE_COMPUTE_REG + C_USE_READY_REG + C_PIPELINE_OUTPUT;

    wire                                  wTxHdrReady;
    wire                                  wTxHdrValid;
    wire [C_MAX_HDR_WIDTH-1:0]            wTxHdr;
    wire [`SIG_NONPAY_W-1:0]              wTxHdrNonpayLen;
    wire [`SIG_PACKETLEN_W-1:0]           wTxHdrPacketLen;
    wire [`SIG_LEN_W-1:0]                 wTxHdrPayloadLen; 
    wire                                  wTxHdrNoPayload;

    wire                                  wTxDataReady;
    wire [C_DATA_WIDTH-1:0]               wTxData;
    wire [clog2s(C_DATA_WIDTH/32)-1:0]    wTxDataEndOffset;
    wire                                  wTxDataStartFlag;
    wire                                  wTxDataPacketValid;
    wire [(C_DATA_WIDTH/32)-1:0]          wTxDataEndFlags;
    wire [(C_DATA_WIDTH/32)-1:0]          wTxDataWordValid;
    wire [(C_DATA_WIDTH/32)-1:0]          wTxDataWordReady;

    tx_data_pipeline
        #(.C_DEPTH_PACKETS              (C_DATA_FIFO_DEPTH),
          /*AUTOINSTPARAM*/
          // Parameters
          .C_DATA_WIDTH                 (C_DATA_WIDTH),
          .C_PIPELINE_INPUT             (C_PIPELINE_INPUT),
          .C_PIPELINE_OUTPUT            (C_PIPELINE_OUTPUT),
          .C_MAX_PAYLOAD_DWORDS         (C_MAX_PAYLOAD_DWORDS),
          .C_VENDOR                     (C_VENDOR))
    tx_data_pipeline_inst
        (// Outputs
         .RD_TX_DATA                    (wTxData[C_DATA_WIDTH-1:0]),
         .RD_TX_DATA_WORD_VALID         (wTxDataWordValid[(C_DATA_WIDTH/32)-1:0]),
         .RD_TX_DATA_START_FLAG         (wTxDataStartFlag),
         .RD_TX_DATA_END_FLAGS          (wTxDataEndFlags[(C_DATA_WIDTH/32)-1:0]),
         .RD_TX_DATA_PACKET_VALID       (wTxDataPacketValid),
         .WR_TX_DATA_READY              (TX_DATA_READY),
         // Inputs
         .RD_TX_DATA_WORD_READY         (wTxDataWordReady[(C_DATA_WIDTH/32)-1:0]),
         .WR_TX_DATA                    (TX_DATA),
         .WR_TX_DATA_VALID              (TX_DATA_VALID),
         .WR_TX_DATA_START_FLAG         (TX_DATA_START_FLAG),
         .WR_TX_DATA_START_OFFSET       (TX_DATA_START_OFFSET[clog2s(C_DATA_WIDTH/32)-1:0]),
         .WR_TX_DATA_END_FLAG           (TX_DATA_END_FLAG),
         .WR_TX_DATA_END_OFFSET         (TX_DATA_END_OFFSET[clog2s(C_DATA_WIDTH/32)-1:0]),
         /*AUTOINST*/
         // Inputs
         .CLK                           (CLK),
         .RST_IN                        (RST_IN));

    // TX Header Fifo
    tx_hdr_fifo
        #(.C_PIPELINE_OUTPUT            (C_PIPELINE_HDR_FIFO_OUTPUT),
          .C_PIPELINE_INPUT             (C_PIPELINE_HDR_FIFO_INPUT),
          /*AUTOINSTPARAM*/
          // Parameters
          .C_DEPTH_PACKETS              (C_DEPTH_PACKETS),
          .C_MAX_HDR_WIDTH              (C_MAX_HDR_WIDTH),
          .C_VENDOR                     (C_VENDOR))
    txhf_inst
        (// Outputs
         .WR_TX_HDR_READY               (TX_HDR_READY),
         .RD_TX_HDR                     (wTxHdr[C_MAX_HDR_WIDTH-1:0]),
         .RD_TX_HDR_VALID               (wTxHdrValid),
         .RD_TX_HDR_NOPAYLOAD           (wTxHdrNoPayload),
         .RD_TX_HDR_PAYLOAD_LEN         (wTxHdrPayloadLen[`SIG_LEN_W-1:0]),
         .RD_TX_HDR_NONPAY_LEN          (wTxHdrNonpayLen[`SIG_NONPAY_W-1:0]),
         .RD_TX_HDR_PACKET_LEN          (wTxHdrPacketLen[`SIG_PACKETLEN_W-1:0]),
         // Inputs
         .WR_TX_HDR                     (TX_HDR[C_MAX_HDR_WIDTH-1:0]),
         .WR_TX_HDR_VALID               (TX_HDR_VALID),
         .WR_TX_HDR_NOPAYLOAD           (TX_HDR_NOPAYLOAD),
         .WR_TX_HDR_PAYLOAD_LEN         (TX_HDR_PAYLOAD_LEN[`SIG_LEN_W-1:0]),
         .WR_TX_HDR_NONPAY_LEN          (TX_HDR_NONPAY_LEN[`SIG_NONPAY_W-1:0]),
         .WR_TX_HDR_PACKET_LEN          (TX_HDR_PACKET_LEN[`SIG_PACKETLEN_W-1:0]),
         .RD_TX_HDR_READY               (wTxHdrReady),
         /*AUTOINST*/
         // Inputs
         .CLK                           (CLK),
         .RST_IN                        (RST_IN));

    // TX Header Fifo
    tx_alignment_pipeline
        #(// Parameters
          .C_PIPELINE_OUTPUT            (1),
          .C_PIPELINE_DATA_INPUT        (1),
          .C_PIPELINE_HDR_INPUT         (C_PIPELINE_HDR_INPUT),
          .C_DATA_WIDTH                 (C_DATA_WIDTH),
          // Parameters
          /*AUTOINSTPARAM*/
          // Parameters
          .C_USE_COMPUTE_REG            (C_USE_COMPUTE_REG),
          .C_USE_READY_REG              (C_USE_READY_REG),
          .C_MAX_HDR_WIDTH              (C_MAX_HDR_WIDTH),
          .C_VENDOR                     (C_VENDOR))
    tx_alignment_inst
        (// Outputs
         .TX_DATA_WORD_READY            (wTxDataWordReady[(C_DATA_WIDTH/32)-1:0]),
         .TX_HDR_READY                  (wTxHdrReady),
         // Inputs
         .TX_DATA_START_FLAG            (wTxDataStartFlag),
         .TX_DATA_END_FLAGS             (wTxDataEndFlags),
         .TX_DATA_WORD_VALID            (wTxDataWordValid[(C_DATA_WIDTH/32)-1:0]),
         .TX_DATA_PACKET_VALID          (wTxDataPacketValid),
         .TX_DATA                       (wTxData[C_DATA_WIDTH-1:0]),
         .TX_HDR                        (wTxHdr[C_MAX_HDR_WIDTH-1:0]),
         .TX_HDR_VALID                  (wTxHdrValid),
         .TX_HDR_NOPAYLOAD              (wTxHdrNoPayload),
         .TX_HDR_PAYLOAD_LEN            (wTxHdrPayloadLen[`SIG_LEN_W-1:0]),
         .TX_HDR_NONPAY_LEN             (wTxHdrNonpayLen[`SIG_NONPAY_W-1:0]),
         .TX_HDR_PACKET_LEN             (wTxHdrPacketLen[`SIG_PACKETLEN_W-1:0]),
         /*AUTOINST*/
         // Outputs
         .TX_PKT                        (TX_PKT[C_DATA_WIDTH-1:0]),
         .TX_PKT_START_FLAG             (TX_PKT_START_FLAG),
         .TX_PKT_START_OFFSET           (TX_PKT_START_OFFSET[clog2s(C_DATA_WIDTH/32)-1:0]),
         .TX_PKT_END_FLAG               (TX_PKT_END_FLAG),
         .TX_PKT_END_OFFSET             (TX_PKT_END_OFFSET[clog2s(C_DATA_WIDTH/32)-1:0]),
         .TX_PKT_VALID                  (TX_PKT_VALID),
         // Inputs
         .CLK                           (CLK),
         .RST_IN                        (RST_IN),
         .TX_PKT_READY                  (TX_PKT_READY));

endmodule