riffa/fpga/riffa_hdl/chnl_tester.v

// ----------------------------------------------------------------------
// Copyright (c) 2016, The Regents of the University of California All
// rights reserved.
// 
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions are
// met:
// 
//     * Redistributions of source code must retain the above copyright
//       notice, this list of conditions and the following disclaimer.
// 
//     * Redistributions in binary form must reproduce the above
//       copyright notice, this list of conditions and the following
//       disclaimer in the documentation and/or other materials provided
//       with the distribution.
// 
//     * Neither the name of The Regents of the University of California
//       nor the names of its contributors may be used to endorse or
//       promote products derived from this software without specific
//       prior written permission.
// 
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL REGENTS OF THE
// UNIVERSITY OF CALIFORNIA BE LIABLE FOR ANY DIRECT, INDIRECT,
// INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
// BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
// OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
// ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
// TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
// USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
// DAMAGE.
// ----------------------------------------------------------------------
//----------------------------------------------------------------------------
// Filename:			chnl_tester.v
// Version:				1.00.a
// Verilog Standard:	Verilog-2001
// Description:			Sample RIFFA channel user module. Designed to exercise
// 						the RIFFA TX and RX interfaces. Receives data on the
//						RX interface and saves the last value received. Sends
//						the same amount of data back on the TX interface. The
//						returned data starts with the last value received, 
//						resets and increments to end with a value equal to the
//						number of (4 byte) words sent back on the TX interface.
// Author:				Matt Jacobsen
// History:				@mattj: Version 2.0
//-----------------------------------------------------------------------------
`timescale 1ns/1ns
module chnl_tester #(
	parameter C_PCI_DATA_WIDTH = 9'd32
)
(
	input CLK,
	input RST,
	output CHNL_RX_CLK, 
	input CHNL_RX, 
	output CHNL_RX_ACK, 
	input CHNL_RX_LAST, 
	input [31:0] CHNL_RX_LEN, 
	input [30:0] CHNL_RX_OFF, 
	input [C_PCI_DATA_WIDTH-1:0] CHNL_RX_DATA, 
	input CHNL_RX_DATA_VALID, 
	output CHNL_RX_DATA_REN,
	
	output CHNL_TX_CLK, 
	output CHNL_TX, 
	input CHNL_TX_ACK, 
	output CHNL_TX_LAST, 
	output [31:0] CHNL_TX_LEN, 
	output [30:0] CHNL_TX_OFF, 
	output [C_PCI_DATA_WIDTH-1:0] CHNL_TX_DATA, 
	output CHNL_TX_DATA_VALID, 
	input CHNL_TX_DATA_REN
);

reg [C_PCI_DATA_WIDTH-1:0] rData={C_PCI_DATA_WIDTH{1'b0}};
reg [31:0] rLen=0;
reg [31:0] rCount=0;
reg [1:0] rState=0;

assign CHNL_RX_CLK = CLK;
assign CHNL_RX_ACK = (rState == 2'd1);
assign CHNL_RX_DATA_REN = (rState == 2'd1);

assign CHNL_TX_CLK = CLK;
assign CHNL_TX = (rState == 2'd3);
assign CHNL_TX_LAST = 1'd1;
assign CHNL_TX_LEN = rLen; // in words
assign CHNL_TX_OFF = 0;
assign CHNL_TX_DATA = rData;
assign CHNL_TX_DATA_VALID = (rState == 2'd3);

always @(posedge CLK or posedge RST) begin
	if (RST) begin
		rLen <= #1 0;
		rCount <= #1 0;
		rState <= #1 0;
		rData <= #1 0;
	end
	else begin
		case (rState)
		
		2'd0: begin // Wait for start of RX, save length
			if (CHNL_RX) begin
				rLen <= #1 CHNL_RX_LEN;
				rCount <= #1 0;
				rState <= #1 2'd1;
			end
		end
		
		2'd1: begin // Wait for last data in RX, save value
			if (CHNL_RX_DATA_VALID) begin
				rData <= #1 CHNL_RX_DATA;
				rCount <= #1 rCount + (C_PCI_DATA_WIDTH/32);
			end
			if (rCount >= rLen)
				rState <= #1 2'd2;
		end

		2'd2: begin // Prepare for TX
			rCount <= #1 (C_PCI_DATA_WIDTH/32);
			rState <= #1 2'd3;
		end

		2'd3: begin // Start TX with save length and data value
			if (CHNL_TX_DATA_REN & CHNL_TX_DATA_VALID) begin
				rData <= #1 {rCount + 4, rCount + 3, rCount + 2, rCount + 1};
				rCount <= #1 rCount + (C_PCI_DATA_WIDTH/32);
				if (rCount >= rLen)
					rState <= #1 2'd0;
			end
		end
		
		endcase
	end
end

/*
wire [35:0] wControl0;
chipscope_icon_1 cs_icon(
	.CONTROL0(wControl0)
);

chipscope_ila_t8_512 a0(
	.CLK(CLK), 
	.CONTROL(wControl0), 
	.TRIG0({3'd0, (rCount >= 800), CHNL_RX, CHNL_RX_DATA_VALID, rState}),
	.DATA({442'd0,
			CHNL_TX_DATA_REN, // 1
			CHNL_TX_ACK, // 1
			CHNL_RX_DATA, // 64
			CHNL_RX_DATA_VALID, // 1
			CHNL_RX, // 1
			rState}) // 2
);
*/

endmodule