Add STM32F4 support

Specifically, the STM32F407VE.
Even more specifically, [this](https://stm32-base.org/boards/STM32F407VET6-STM32-F4VE-V2.0.html) dev board

.gitignore

@@ -6,3 +6,5 @@
 *.asmo
 *.elf
 *~
+.cache/
+compile_commands.json

CMakeLists.txt

@@ -1,9 +1,10 @@
 cmake_minimum_required(VERSION 3.13)
 project(candleLightFirmware C ASM)
 
+set(CMAKE_EXPORT_COMPILE_COMMANDS ON)
+
 add_compile_options(
-    -std=gnu11
-    -mcpu=cortex-m0 -mthumb
+    -std=gnu11 -mthumb
     -Wall -Wextra -Werror
     -fmessage-length=0
     -fsigned-char
@@ -17,8 +18,7 @@ add_compile_options(
 )
 
 add_link_options(
-    -mcpu=cortex-m0 -mthumb
-    -Wall -Wextra -g3
+    -mthumb -Wall -Wextra -g3
     -Xlinker --gc-sections 
     --specs=nano.specs
     --specs=nosys.specs
@@ -118,7 +118,9 @@ function(add_f042_target TGTNAME)
 	add_executable(${TGTNAME}_fw ${SOURCE_FILES})
 	add_dependencies(${TGTNAME}_fw version_h)
     target_include_directories(${TGTNAME}_fw PRIVATE include/ ${CMAKE_CURRENT_BINARY_DIR})
-    target_compile_definitions(${TGTNAME}_fw PRIVATE BOARD=BOARD_${TGTNAME})
+    target_compile_options(${TGTNAME}_fw BEFORE PRIVATE -mcpu=cortex-m0)
+    target_compile_definitions(${TGTNAME}_fw PRIVATE BOARD=BOARD_${TGTNAME} STM32F0)
+    target_link_options(${TGTNAME}_fw BEFORE PRIVATE -mcpu=cortex-m0)
 	target_link_options(${TGTNAME}_fw PRIVATE -T ${CMAKE_SOURCE_DIR}/ldscripts/STM32F042X6.ld)
     target_link_libraries(${TGTNAME}_fw PRIVATE STM32_HAL_STM32F042x6 STM32_USB_Device_Library_STM32F042x6)
     make_bin_file(${TGTNAME}_fw)
@@ -130,18 +132,37 @@ function(add_f072_target TGTNAME)
 	add_executable(${TGTNAME}_fw ${SOURCE_FILES})
 	add_dependencies(${TGTNAME}_fw version_h)
     target_include_directories(${TGTNAME}_fw PRIVATE include/ ${CMAKE_CURRENT_BINARY_DIR})
-    target_compile_definitions(${TGTNAME}_fw PRIVATE BOARD=BOARD_${TGTNAME})
+    target_compile_options(${TGTNAME}_fw BEFORE PRIVATE -mcpu=cortex-m0)
+    target_compile_definitions(${TGTNAME}_fw PRIVATE BOARD=BOARD_${TGTNAME} STM32F0)
+    target_link_options(${TGTNAME}_fw BEFORE PRIVATE -mcpu=cortex-m0)
 	target_link_options(${TGTNAME}_fw PRIVATE -T ${CMAKE_SOURCE_DIR}/ldscripts/STM32F072XB.ld)
+    target_link_options(STM32_HAL_STM32F072xB BEFORE PRIVATE -mcpu=cortex-m0)
+    target_link_options(STM32_USB_Device_Library_STM32F072xB BEFORE PRIVATE -mcpu=cortex-m0)
     target_link_libraries(${TGTNAME}_fw PRIVATE STM32_HAL_STM32F072xB STM32_USB_Device_Library_STM32F072xB)
     make_bin_file(${TGTNAME}_fw)
     dfu_flash(${TGTNAME}_fw)
     show_object_size(${TGTNAME}_fw)
 endfunction()
 
+function(add_f407_target TGTNAME)
+	add_executable(${TGTNAME}_fw ${SOURCE_FILES})
+	add_dependencies(${TGTNAME}_fw version_h)
+    target_include_directories(${TGTNAME}_fw PRIVATE include/ ${CMAKE_CURRENT_BINARY_DIR})
+    target_compile_definitions(${TGTNAME}_fw PRIVATE BOARD=BOARD_${TGTNAME} STM32F4)
+    target_compile_options(${TGTNAME}_fw BEFORE PRIVATE -mcpu=cortex-m4)
+    target_link_options(${TGTNAME}_fw BEFORE PRIVATE -mcpu=cortex-m4)
+    target_link_options(${TGTNAME}_fw PRIVATE -T ${CMAKE_SOURCE_DIR}/ldscripts/STM32F407XE.ld)
+    target_link_libraries(${TGTNAME}_fw PRIVATE STM32_HAL_STM32F407xE STM32_USB_Device_Library_STM32F407xE)
+    make_bin_file(${TGTNAME}_fw)
+    dfu_flash(${TGTNAME}_fw)
+    show_object_size(${TGTNAME}_fw)
+endfunction()
+
 ########## generate list of targets.
 # the "_fw" part is appended automatically
 set(TGT042_LIST "cantact" "canalyze" "canable" "usb2can" "cannette")
 set(TGT072_LIST "candleLight")
+set(TGT407_LIST "STM32F4_DevBoard")
 
 
 foreach (TGTNAME IN LISTS TGT042_LIST)
@@ -158,6 +179,13 @@ foreach (TGTNAME IN LISTS TGT072_LIST)
 	endif()
 endforeach()
 
+foreach (TGTNAME IN LISTS TGT407_LIST)
+	option(BUILD_${TGTNAME} "Build firmware for \"${TGTNAME}\" (default=yes)" ON)
+	if (BUILD_${TGTNAME})
+		add_f407_target(${TGTNAME})
+	endif()
+endforeach()
+
 message("*******************")
 message("You may now:\n\t-compile all targets ('make')\n\t-compile a single target (e.g. 'make cantact_fw'")
 message("\t-flash a device (e.g. 'make flash-cantact_fw'")

include/can.h

@@ -28,7 +28,9 @@ THE SOFTWARE.
 
 #include <stdint.h>
 #include <stdbool.h>
-#include "stm32f0xx_hal.h"
+
+#include "hal_include.h"
+
 #include <gs_usb.h>
 
 typedef struct {

include/config.h

@@ -42,6 +42,8 @@ THE SOFTWARE.
 #define BOARD_usb2can     4
 #define BOARD_canalyze     5
 #define BOARD_cannette    6
+#define BOARD_STM32F4_DevBoard 7
+
 
 #if BOARD == BOARD_candleLight
 	#define USBD_PRODUCT_STRING_FS		(uint8_t*) "candleLight USB to CAN adapter"
@@ -59,7 +61,6 @@ THE SOFTWARE.
 	#define LED2_Pin GPIO_PIN_1
 	#define LED2_Mode GPIO_MODE_OUTPUT_OD
 	#define LED2_Active_High 0
-
 #elif BOARD == BOARD_cantact
 	#define USBD_PRODUCT_STRING_FS		(uint8_t*) "cantact gs_usb"
 	#define USBD_MANUFACTURER_STRING	(uint8_t*) "cantact.io"
@@ -162,6 +163,27 @@ THE SOFTWARE.
 
 	#define DCDCEN_Port GPIOC
 	#define DCDCEN_Pin GPIO_PIN_15		/* activate DCDC converter, active high */
+#elif BOARD == BOARD_STM32F4_DevBoard
+	#define USBD_PRODUCT_STRING_FS	 (uint8_t*) "STM32F4VE Dev Board"
+	#define USBD_MANUFACTURER_STRING (uint8_t*) "misc"
+	#define DFU_INTERFACE_STRING_FS  (uint8_t*) "STM32F4VE firmware upgrade interface"
+
+	#define CAN_S_Pin		 GPIO_PIN_10
+	#define CAN_S_GPIO_Port  GPIOA
+
+	#define LED1_GPIO_Port	 GPIOA
+	#define LED1_Pin		 GPIO_PIN_6
+	#define LED1_Mode		 GPIO_MODE_OUTPUT_OD
+	#define LED1_Active_High 0
+
+	#define LED2_GPIO_Port	 GPIOA
+	#define LED2_Pin		 GPIO_PIN_7
+	#define LED2_Mode		 GPIO_MODE_OUTPUT_OD
+	#define LED2_Active_High 0
+
+	#define USB_GPIO_Port	 GPIOA
+	#define USB_Pin_DM		 GPIO_PIN_11
+	#define USB_Pin_DP		 GPIO_PIN_12
 #else
 	#error please define BOARD
 #endif

include/usbd_gs_can.h

@@ -45,6 +45,32 @@ THE SOFTWARE.
 
 extern USBD_ClassTypeDef USBD_GS_CAN;
 
+
+#if defined(STM32F0)
+# define USB_INTERFACE   USB
+# define USB_INTERRUPT   USB_IRQn
+# define CAN_INTERFACE   CAN
+# define CAN_CLOCK_SPEED 48000000
+#elif defined(STM32F4)
+# define USB_INTERFACE   USB_OTG_FS
+# define USB_INTERRUPT   OTG_FS_IRQn
+# define CAN_INTERFACE   CAN1
+# define CAN_CLOCK_SPEED 42000000
+    /*
+    * PMA layout
+    *  0x00 -  0x17 (24 bytes) metadata?
+    *  0x18 -  0x57 (64 bytes) EP0 OUT
+    *  0x58 -  0x97 (64 bytes) EP0 IN
+    *  0x98 -  0xD7 (64 bytes) EP1 IN
+    *  0xD8 - 0x157 (128 bytes) EP1 OUT (buffer 1)
+    * 0x158 - 0x1D7 (128 bytes) EP1 OUT (buffer 2)
+    */
+// RX FIFO is defined in words, so divide bytes by 4
+// RX FIFO size chosen according to reference manual RM0368 which suggests
+// using (largest packet size / 4) + 1
+# define USB_RX_FIFO_SIZE ((256U / 4U) + 1U)
+#endif
+
 uint8_t USBD_GS_CAN_Init(USBD_HandleTypeDef *pdev, queue_t *q_frame_pool, queue_t *q_from_host, led_data_t *leds);
 void USBD_GS_CAN_SetChannel(USBD_HandleTypeDef *pdev, uint8_t channel, can_data_t* handle);
 bool USBD_GS_CAN_TxReady(USBD_HandleTypeDef *pdev);

ldscripts/STM32F407XE.ld

@@ -0,0 +1,151 @@
+__STACK_SIZE = 32K;
+__HEAP_SIZE  = 64K;
+
+__FLASH_SIZE = 512K;
+__NVM_SIZE = 128K;
+
+MEMORY
+{
+  FLASH (rx)  : ORIGIN = 0x08000000, LENGTH = __FLASH_SIZE - __NVM_SIZE
+  RAM   (rwx) : ORIGIN = 0x20000000, LENGTH = 128K
+  DATA (xrw) : ORIGIN = 0x08000000 + __FLASH_SIZE - __NVM_SIZE, LENGTH = __NVM_SIZE
+}
+
+
+ENTRY(Reset_Handler)
+
+SECTIONS
+{
+  .text :
+  {
+    KEEP(*(.vectors))
+    *(.text*)
+
+    KEEP(*(.init))
+    KEEP(*(.fini))
+
+    /* .ctors */
+    *crtbegin.o(.ctors)
+    *crtbegin?.o(.ctors)
+    *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors)
+    *(SORT(.ctors.*))
+    *(.ctors)
+
+    /* .dtors */
+    *crtbegin.o(.dtors)
+    *crtbegin?.o(.dtors)
+    *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors)
+    *(SORT(.dtors.*))
+    *(.dtors)
+
+    *(.rodata*)
+
+    KEEP(*(.eh_frame*))
+  } > FLASH
+
+  .ARM.extab :
+  {
+    *(.ARM.extab* .gnu.linkonce.armextab.*)
+  } > FLASH
+
+  __exidx_start = .;
+  .ARM.exidx :
+  {
+    *(.ARM.exidx* .gnu.linkonce.armexidx.*)
+  } > FLASH
+  __exidx_end = .;
+
+  .copy.table :
+  {
+    . = ALIGN(4);
+    __copy_table_start__ = .;
+    LONG (__etext)
+    LONG (__data_start__)
+    LONG (__data_end__ - __data_start__)
+    __copy_table_end__ = .;
+  } > FLASH
+
+  .zero.table :
+  {
+    . = ALIGN(4);
+    __zero_table_start__ = .;
+    __zero_table_end__ = .;
+  } > FLASH
+
+  __etext = ALIGN (4);
+
+  .user_data :
+  {
+    . = ALIGN(4);
+    *(.user_data)
+    . = ALIGN(4);
+  } > DATA
+
+  .data : AT (__etext)
+  {
+    __data_start__ = .;
+    *(vtable)
+    *(.data)
+    *(.data.*)
+
+    . = ALIGN(4);
+    /* preinit data */
+    PROVIDE_HIDDEN (__preinit_array_start = .);
+    KEEP(*(.preinit_array))
+    PROVIDE_HIDDEN (__preinit_array_end = .);
+
+    . = ALIGN(4);
+    /* init data */
+    PROVIDE_HIDDEN (__init_array_start = .);
+    KEEP(*(SORT(.init_array.*)))
+    KEEP(*(.init_array))
+    PROVIDE_HIDDEN (__init_array_end = .);
+
+
+    . = ALIGN(4);
+    /* finit data */
+    PROVIDE_HIDDEN (__fini_array_start = .);
+    KEEP(*(SORT(.fini_array.*)))
+    KEEP(*(.fini_array))
+    PROVIDE_HIDDEN (__fini_array_end = .);
+
+    KEEP(*(.jcr*))
+    . = ALIGN(4);
+    /* All data end */
+    __data_end__ = .;
+
+  } > RAM
+
+  .bss :
+  {
+    . = ALIGN(4);
+    __bss_start__ = .;
+    *(.bss)
+    *(.bss.*)
+    *(COMMON)
+    . = ALIGN(4);
+    __bss_end__ = .;
+  } > RAM AT > RAM
+
+  .heap (COPY) :
+  {
+    . = ALIGN(8);
+    __end__ = .;
+    PROVIDE(end = .);
+    . = . + __HEAP_SIZE;
+    . = ALIGN(8);
+    __HeapLimit = .;
+  } > RAM
+
+  .stack (ORIGIN(RAM) + LENGTH(RAM) - __STACK_SIZE) (COPY) :
+  {
+    . = ALIGN(8);
+    __StackLimit = .;
+    . = . + __STACK_SIZE;
+    . = ALIGN(8);
+    __StackTop = .;
+  } > RAM
+  PROVIDE(__stack = __StackTop);
+
+  ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack")
+}

libs/STM32_HAL/CMakeLists.txt

@@ -1,15 +1,17 @@
 project(STM32_HAL)
 
-set(SOURCES
+set(STM32F0_SOURCES
     config/stm32f0xx_hal_conf.h
 
-    include/stm32f0xx/stm32f0xx_hal_def.h    
+    config/hal_include.h
+
+    include/stm32f0xx/stm32f0xx_hal_def.h
     include/stm32f0xx/stm32f0xx_hal.h
     src/stm32f0xx/stm32f0xx_hal.c
-    
+
     include/stm32f0xx/stm32f0xx_hal_can.h
     src/stm32f0xx/stm32f0xx_hal_can.c
-    
+
     include/stm32f0xx/stm32f0xx_hal_cortex.h
     src/stm32f0xx/stm32f0xx_hal_cortex.c
 
@@ -54,20 +56,83 @@ set(SOURCES
     include/cmsis/device/system_stm32f0xx.h
 )
 
+
+set(STM32F4_SOURCES
+    config/stm32f4xx_hal_conf.h
+
+    include/stm32f4xx/stm32f4xx_hal_def.h
+    include/stm32f4xx/stm32f4xx_hal.h
+    src/stm32f4xx/stm32f4xx_hal.c
+
+    include/stm32f4xx/stm32f4xx_hal_can.h
+    src/stm32f4xx/stm32f4xx_hal_can.c
+
+    include/stm32f4xx/stm32f4xx_hal_cortex.h
+    src/stm32f4xx/stm32f4xx_hal_cortex.c
+
+    include/stm32f4xx/stm32f4xx_hal_flash_ex.h
+    src/stm32f4xx/stm32f4xx_hal_flash_ex.c
+    include/stm32f4xx/stm32f4xx_hal_flash.h
+    src/stm32f4xx/stm32f4xx_hal_flash.c
+
+    include/stm32f4xx/stm32f4xx_hal_gpio_ex.h
+    include/stm32f4xx/stm32f4xx_hal_gpio.h
+    src/stm32f4xx/stm32f4xx_hal_gpio.c
+
+    include/stm32f4xx/stm32f4xx_hal_pcd_ex.h
+    src/stm32f4xx/stm32f4xx_hal_pcd_ex.c
+    include/stm32f4xx/stm32f4xx_hal_pcd.h
+    src/stm32f4xx/stm32f4xx_hal_pcd.c
+
+    include/stm32f4xx/stm32f4xx_hal_rcc.h
+    src/stm32f4xx/stm32f4xx_hal_rcc.c
+    include/stm32f4xx/stm32f4xx_hal_rcc_ex.h
+    src/stm32f4xx/stm32f4xx_hal_rcc_ex.c
+
+    include/stm32f4xx/stm32f4xx_hal_pwr.h
+    src/stm32f4xx/stm32f4xx_hal_pwr.c
+    include/stm32f4xx/stm32f4xx_hal_pwr_ex.h
+    src/stm32f4xx/stm32f4xx_hal_pwr_ex.c
+
+    include/stm32f4xx/stm32f4xx_hal_tim_ex.h
+    src/stm32f4xx/stm32f4xx_hal_tim_ex.c
+    include/stm32f4xx/stm32f4xx_hal_tim.h
+    src/stm32f4xx/stm32f4xx_hal_tim.c
+
+    include/stm32f4xx/stm32f4xx_ll_usb.h
+    src/stm32f4xx/stm32f4xx_ll_usb.c
+
+    src/cmsis/system_stm32f4xx.c
+    include/stm32f4xx/Legacy/stm32_hal_legacy.h
+
+    include/cmsis/cmsis_compiler.h
+    include/cmsis/cmsis_device.h
+    include/cmsis/cmsis_gcc.h
+    include/cmsis/cmsis_version.h
+    include/cmsis/core_cm4.h
+    include/cmsis/device/stm32f4xx.h
+    include/cmsis/device/stm32f407xx.h
+    include/cmsis/device/system_stm32f4xx.h
+)
+
 set(INCLUDE_DIRS
     include/
     include/cmsis
-    include/stm32f0xx
     include/cmsis/device
     config/
 )
 
-add_library(STM32_HAL_STM32F042x6 STATIC ${SOURCES})
-    target_include_directories(STM32_HAL_STM32F042x6 PUBLIC ${INCLUDE_DIRS})
-    target_compile_options(STM32_HAL_STM32F042x6 PRIVATE -Wno-unused-parameter)
-    target_compile_definitions(STM32_HAL_STM32F042x6 PUBLIC STM32F042x6)
+add_library(STM32_HAL_STM32F042x6 STATIC ${STM32F0_SOURCES})
+    target_include_directories(STM32_HAL_STM32F042x6 PUBLIC ${INCLUDE_DIRS} include/stm32f0xx)
+    target_compile_options(STM32_HAL_STM32F042x6 PRIVATE -mcpu=cortex-m0 -Wno-unused-parameter)
+    target_compile_definitions(STM32_HAL_STM32F042x6 PUBLIC STM32F042x6 HAL_TARGET_PREFIX=stm32f0xx)
 
-add_library(STM32_HAL_STM32F072xB STATIC ${SOURCES})
-    target_include_directories(STM32_HAL_STM32F072xB PUBLIC ${INCLUDE_DIRS})
-    target_compile_options(STM32_HAL_STM32F072xB PRIVATE -Wno-unused-parameter)
-    target_compile_definitions(STM32_HAL_STM32F072xB PUBLIC STM32F072xB)
+add_library(STM32_HAL_STM32F072xB STATIC ${STM32F0_SOURCES})
+    target_include_directories(STM32_HAL_STM32F072xB PUBLIC ${INCLUDE_DIRS} include/stm32f0xx)
+    target_compile_options(STM32_HAL_STM32F072xB PRIVATE -mcpu=cortex-m0 -Wno-unused-parameter)
+    target_compile_definitions(STM32_HAL_STM32F072xB PUBLIC STM32F072xB HAL_TARGET_PREFIX=stm32f0xx)
+
+add_library(STM32_HAL_STM32F407xE STATIC ${STM32F4_SOURCES})
+    target_include_directories(STM32_HAL_STM32F407xE PUBLIC ${INCLUDE_DIRS} include/stm32f4xx)
+    target_compile_options(STM32_HAL_STM32F407xE PRIVATE -mcpu=cortex-m4 -Wno-unused-parameter)
+    target_compile_definitions(STM32_HAL_STM32F407xE PUBLIC STM32F407xx HAL_TARGET_PREFIX=stm32f4xx)

libs/STM32_HAL/config/hal_include.h

@@ -0,0 +1,33 @@
+/*
+
+The MIT License (MIT)
+
+Copyright (c) 2016 Hubert Denkmair
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in
+all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+THE SOFTWARE.
+
+*/
+
+#pragma once
+
+#if defined(STM32F0)
+# include "stm32f0xx_hal.h"
+#elif defined(STM32F4)
+# include "stm32f4xx_hal.h"
+#endif

libs/STM32_HAL/config/stm32f4xx_hal_conf.h

@@ -0,0 +1,501 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_conf_template.h
+  * @author  MCD Application Team
+  * @brief   HAL configuration template file. 
+  *          This file should be copied to the application folder and renamed
+  *          to stm32f4xx_hal_conf.h.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */ 
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_CONF_H
+#define __STM32F4xx_HAL_CONF_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/* ########################## Module Selection ############################## */
+/**
+  * @brief This is the list of modules to be used in the HAL driver 
+  */
+#define HAL_MODULE_ENABLED  
+// #define HAL_ADC_MODULE_ENABLED
+#define HAL_CAN_MODULE_ENABLED
+/* #define HAL_CAN_LEGACY_MODULE_ENABLED */
+// #define HAL_CRC_MODULE_ENABLED
+// #define HAL_CEC_MODULE_ENABLED
+// #define HAL_CRYP_MODULE_ENABLED
+// #define HAL_DAC_MODULE_ENABLED
+// #define HAL_DCMI_MODULE_ENABLED
+// #define HAL_DMA_MODULE_ENABLED
+// #define HAL_DMA2D_MODULE_ENABLED
+// #define HAL_ETH_MODULE_ENABLED
+#define HAL_FLASH_MODULE_ENABLED
+// #define HAL_NAND_MODULE_ENABLED
+// #define HAL_NOR_MODULE_ENABLED
+// #define HAL_PCCARD_MODULE_ENABLED
+// #define HAL_SRAM_MODULE_ENABLED
+// #define HAL_SDRAM_MODULE_ENABLED
+// #define HAL_HASH_MODULE_ENABLED
+#define HAL_GPIO_MODULE_ENABLED
+// #define HAL_EXTI_MODULE_ENABLED
+// #define HAL_I2C_MODULE_ENABLED
+// #define HAL_SMBUS_MODULE_ENABLED
+// #define HAL_I2S_MODULE_ENABLED
+// #define HAL_IWDG_MODULE_ENABLED
+// #define HAL_LTDC_MODULE_ENABLED
+// #define HAL_DSI_MODULE_ENABLED
+#define HAL_PWR_MODULE_ENABLED
+// #define HAL_QSPI_MODULE_ENABLED
+#define HAL_RCC_MODULE_ENABLED
+// #define HAL_RNG_MODULE_ENABLED
+// #define HAL_RTC_MODULE_ENABLED
+// #define HAL_SAI_MODULE_ENABLED
+// #define HAL_SD_MODULE_ENABLED
+// #define HAL_SPI_MODULE_ENABLED
+// #define HAL_TIM_MODULE_ENABLED
+// #define HAL_UART_MODULE_ENABLED
+// #define HAL_USART_MODULE_ENABLED
+// #define HAL_IRDA_MODULE_ENABLED
+// #define HAL_SMARTCARD_MODULE_ENABLED
+// #define HAL_WWDG_MODULE_ENABLED
+#define HAL_CORTEX_MODULE_ENABLED
+#define HAL_PCD_MODULE_ENABLED
+// #define HAL_HCD_MODULE_ENABLED
+// #define HAL_FMPI2C_MODULE_ENABLED
+// #define HAL_FMPSMBUS_MODULE_ENABLED
+// #define HAL_SPDIFRX_MODULE_ENABLED
+// #define HAL_DFSDM_MODULE_ENABLED
+// #define HAL_LPTIM_MODULE_ENABLED
+// #define HAL_MMC_MODULE_ENABLED
+
+/* ########################## HSE/HSI Values adaptation ##################### */
+/**
+  * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
+  *        This value is used by the RCC HAL module to compute the system frequency
+  *        (when HSE is used as system clock source, directly or through the PLL).  
+  */
+#if !defined  (HSE_VALUE) 
+  #define HSE_VALUE              25000000U /*!< Value of the External oscillator in Hz */
+#endif /* HSE_VALUE */
+
+#if !defined  (HSE_STARTUP_TIMEOUT)
+  #define HSE_STARTUP_TIMEOUT    100U      /*!< Time out for HSE start up, in ms */
+#endif /* HSE_STARTUP_TIMEOUT */
+
+/**
+  * @brief Internal High Speed oscillator (HSI) value.
+  *        This value is used by the RCC HAL module to compute the system frequency
+  *        (when HSI is used as system clock source, directly or through the PLL). 
+  */
+#if !defined  (HSI_VALUE)
+  #define HSI_VALUE              16000000U /*!< Value of the Internal oscillator in Hz */
+#endif /* HSI_VALUE */
+
+/**
+  * @brief Internal Low Speed oscillator (LSI) value.
+  */
+#if !defined  (LSI_VALUE) 
+ #define LSI_VALUE               32000U    /*!< LSI Typical Value in Hz */
+#endif /* LSI_VALUE */                     /*!< Value of the Internal Low Speed oscillator in Hz
+                                                The real value may vary depending on the variations
+                                                in voltage and temperature. */
+/**
+  * @brief External Low Speed oscillator (LSE) value.
+  */
+#if !defined  (LSE_VALUE)
+ #define LSE_VALUE               32768U    /*!< Value of the External Low Speed oscillator in Hz */
+#endif /* LSE_VALUE */
+
+#if !defined  (LSE_STARTUP_TIMEOUT)
+  #define LSE_STARTUP_TIMEOUT    5000U     /*!< Time out for LSE start up, in ms */
+#endif /* LSE_STARTUP_TIMEOUT */
+
+/**
+  * @brief External clock source for I2S peripheral
+  *        This value is used by the I2S HAL module to compute the I2S clock source 
+  *        frequency, this source is inserted directly through I2S_CKIN pad. 
+  */
+#if !defined  (EXTERNAL_CLOCK_VALUE)
+  #define EXTERNAL_CLOCK_VALUE     12288000U /*!< Value of the External oscillator in Hz*/
+#endif /* EXTERNAL_CLOCK_VALUE */
+
+/* Tip: To avoid modifying this file each time you need to use different HSE,
+   ===  you can define the HSE value in your toolchain compiler preprocessor. */
+
+/* ########################### System Configuration ######################### */
+/**
+  * @brief This is the HAL system configuration section
+  */     
+#define  VDD_VALUE                    3300U /*!< Value of VDD in mv */
+#define  TICK_INT_PRIORITY            0x0FU /*!< tick interrupt priority */
+#define  USE_RTOS                     0U
+#define  PREFETCH_ENABLE              1U
+#define  INSTRUCTION_CACHE_ENABLE     1U
+#define  DATA_CACHE_ENABLE            1U
+
+#define  USE_HAL_ADC_REGISTER_CALLBACKS         0U /* ADC register callback disabled       */
+#define  USE_HAL_CAN_REGISTER_CALLBACKS         0U /* CAN register callback disabled       */
+#define  USE_HAL_CEC_REGISTER_CALLBACKS         0U /* CEC register callback disabled       */
+#define  USE_HAL_CRYP_REGISTER_CALLBACKS        0U /* CRYP register callback disabled      */
+#define  USE_HAL_DAC_REGISTER_CALLBACKS         0U /* DAC register callback disabled       */
+#define  USE_HAL_DCMI_REGISTER_CALLBACKS        0U /* DCMI register callback disabled      */
+#define  USE_HAL_DFSDM_REGISTER_CALLBACKS       0U /* DFSDM register callback disabled     */
+#define  USE_HAL_DMA2D_REGISTER_CALLBACKS       0U /* DMA2D register callback disabled     */
+#define  USE_HAL_DSI_REGISTER_CALLBACKS         0U /* DSI register callback disabled       */
+#define  USE_HAL_ETH_REGISTER_CALLBACKS         0U /* ETH register callback disabled       */
+#define  USE_HAL_HASH_REGISTER_CALLBACKS        0U /* HASH register callback disabled      */
+#define  USE_HAL_HCD_REGISTER_CALLBACKS         0U /* HCD register callback disabled       */
+#define  USE_HAL_I2C_REGISTER_CALLBACKS         0U /* I2C register callback disabled       */
+#define  USE_HAL_FMPI2C_REGISTER_CALLBACKS      0U /* FMPI2C register callback disabled    */
+#define  USE_HAL_FMPSMBUS_REGISTER_CALLBACKS    0U /* FMPSMBUS register callback disabled  */
+#define  USE_HAL_I2S_REGISTER_CALLBACKS         0U /* I2S register callback disabled       */
+#define  USE_HAL_IRDA_REGISTER_CALLBACKS        0U /* IRDA register callback disabled      */
+#define  USE_HAL_LPTIM_REGISTER_CALLBACKS       0U /* LPTIM register callback disabled     */
+#define  USE_HAL_LTDC_REGISTER_CALLBACKS        0U /* LTDC register callback disabled      */
+#define  USE_HAL_MMC_REGISTER_CALLBACKS         0U /* MMC register callback disabled       */
+#define  USE_HAL_NAND_REGISTER_CALLBACKS        0U /* NAND register callback disabled      */
+#define  USE_HAL_NOR_REGISTER_CALLBACKS         0U /* NOR register callback disabled       */
+#define  USE_HAL_PCCARD_REGISTER_CALLBACKS      0U /* PCCARD register callback disabled    */
+#define  USE_HAL_PCD_REGISTER_CALLBACKS         0U /* PCD register callback disabled       */
+#define  USE_HAL_QSPI_REGISTER_CALLBACKS        0U /* QSPI register callback disabled      */
+#define  USE_HAL_RNG_REGISTER_CALLBACKS         0U /* RNG register callback disabled       */
+#define  USE_HAL_RTC_REGISTER_CALLBACKS         0U /* RTC register callback disabled       */
+#define  USE_HAL_SAI_REGISTER_CALLBACKS         0U /* SAI register callback disabled       */
+#define  USE_HAL_SD_REGISTER_CALLBACKS          0U /* SD register callback disabled        */
+#define  USE_HAL_SMARTCARD_REGISTER_CALLBACKS   0U /* SMARTCARD register callback disabled */
+#define  USE_HAL_SDRAM_REGISTER_CALLBACKS       0U /* SDRAM register callback disabled     */
+#define  USE_HAL_SRAM_REGISTER_CALLBACKS        0U /* SRAM register callback disabled      */
+#define  USE_HAL_SPDIFRX_REGISTER_CALLBACKS     0U /* SPDIFRX register callback disabled   */
+#define  USE_HAL_SMBUS_REGISTER_CALLBACKS       0U /* SMBUS register callback disabled     */
+#define  USE_HAL_SPI_REGISTER_CALLBACKS         0U /* SPI register callback disabled       */
+#define  USE_HAL_TIM_REGISTER_CALLBACKS         0U /* TIM register callback disabled       */
+#define  USE_HAL_UART_REGISTER_CALLBACKS        0U /* UART register callback disabled      */
+#define  USE_HAL_USART_REGISTER_CALLBACKS       0U /* USART register callback disabled     */
+#define  USE_HAL_WWDG_REGISTER_CALLBACKS        0U /* WWDG register callback disabled      */
+
+/* ########################## Assert Selection ############################## */
+/**
+  * @brief Uncomment the line below to expanse the "assert_param" macro in the 
+  *        HAL drivers code
+  */
+/* #define USE_FULL_ASSERT    1U */
+
+/* ################## Ethernet peripheral configuration ##################### */
+
+/* Section 1 : Ethernet peripheral configuration */
+
+/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */
+#define MAC_ADDR0   2U
+#define MAC_ADDR1   0U
+#define MAC_ADDR2   0U
+#define MAC_ADDR3   0U
+#define MAC_ADDR4   0U
+#define MAC_ADDR5   0U
+
+/* Definition of the Ethernet driver buffers size and count */   
+#define ETH_RX_BUF_SIZE                ETH_MAX_PACKET_SIZE /* buffer size for receive               */
+#define ETH_TX_BUF_SIZE                ETH_MAX_PACKET_SIZE /* buffer size for transmit              */
+#define ETH_RXBUFNB                    4U                  /* 4 Rx buffers of size ETH_RX_BUF_SIZE  */
+#define ETH_TXBUFNB                    4U                  /* 4 Tx buffers of size ETH_TX_BUF_SIZE  */
+
+/* Section 2: PHY configuration section */
+
+/* DP83848 PHY Address*/ 
+#define DP83848_PHY_ADDRESS             0x01U
+/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ 
+#define PHY_RESET_DELAY                 0x000000FFU
+/* PHY Configuration delay */
+#define PHY_CONFIG_DELAY                0x00000FFFU
+
+#define PHY_READ_TO                     0x0000FFFFU
+#define PHY_WRITE_TO                    0x0000FFFFU
+
+/* Section 3: Common PHY Registers */
+
+#define PHY_BCR                         ((uint16_t)0x0000)  /*!< Transceiver Basic Control Register   */
+#define PHY_BSR                         ((uint16_t)0x0001)  /*!< Transceiver Basic Status Register    */
+ 
+#define PHY_RESET                       ((uint16_t)0x8000)  /*!< PHY Reset */
+#define PHY_LOOPBACK                    ((uint16_t)0x4000)  /*!< Select loop-back mode */
+#define PHY_FULLDUPLEX_100M             ((uint16_t)0x2100)  /*!< Set the full-duplex mode at 100 Mb/s */
+#define PHY_HALFDUPLEX_100M             ((uint16_t)0x2000)  /*!< Set the half-duplex mode at 100 Mb/s */
+#define PHY_FULLDUPLEX_10M              ((uint16_t)0x0100)  /*!< Set the full-duplex mode at 10 Mb/s  */
+#define PHY_HALFDUPLEX_10M              ((uint16_t)0x0000)  /*!< Set the half-duplex mode at 10 Mb/s  */
+#define PHY_AUTONEGOTIATION             ((uint16_t)0x1000)  /*!< Enable auto-negotiation function     */
+#define PHY_RESTART_AUTONEGOTIATION     ((uint16_t)0x0200)  /*!< Restart auto-negotiation function    */
+#define PHY_POWERDOWN                   ((uint16_t)0x0800)  /*!< Select the power down mode           */
+#define PHY_ISOLATE                     ((uint16_t)0x0400)  /*!< Isolate PHY from MII                 */
+
+#define PHY_AUTONEGO_COMPLETE           ((uint16_t)0x0020)  /*!< Auto-Negotiation process completed   */
+#define PHY_LINKED_STATUS               ((uint16_t)0x0004)  /*!< Valid link established               */
+#define PHY_JABBER_DETECTION            ((uint16_t)0x0002)  /*!< Jabber condition detected            */
+  
+/* Section 4: Extended PHY Registers */
+
+#define PHY_SR                          ((uint16_t)0x0010)  /*!< PHY status register Offset                      */
+#define PHY_MICR                        ((uint16_t)0x0011)  /*!< MII Interrupt Control Register                  */
+#define PHY_MISR                        ((uint16_t)0x0012)  /*!< MII Interrupt Status and Misc. Control Register */
+ 
+#define PHY_LINK_STATUS                 ((uint16_t)0x0001)  /*!< PHY Link mask                                   */
+#define PHY_SPEED_STATUS                ((uint16_t)0x0002)  /*!< PHY Speed mask                                  */
+#define PHY_DUPLEX_STATUS               ((uint16_t)0x0004)  /*!< PHY Duplex mask                                 */
+
+#define PHY_MICR_INT_EN                 ((uint16_t)0x0002)  /*!< PHY Enable interrupts                           */
+#define PHY_MICR_INT_OE                 ((uint16_t)0x0001)  /*!< PHY Enable output interrupt events              */
+
+#define PHY_MISR_LINK_INT_EN            ((uint16_t)0x0020)  /*!< Enable Interrupt on change of link status       */
+#define PHY_LINK_INTERRUPT              ((uint16_t)0x2000)  /*!< PHY link status interrupt mask                  */
+
+/* ################## SPI peripheral configuration ########################## */
+
+/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
+* Activated: CRC code is present inside driver
+* Deactivated: CRC code cleaned from driver
+*/
+
+#define USE_SPI_CRC                     1U
+
+/* Includes ------------------------------------------------------------------*/
+/**
+  * @brief Include module's header file 
+  */
+
+#ifdef HAL_RCC_MODULE_ENABLED
+  #include "stm32f4xx_hal_rcc.h"
+#endif /* HAL_RCC_MODULE_ENABLED */
+
+#ifdef HAL_GPIO_MODULE_ENABLED
+  #include "stm32f4xx_hal_gpio.h"
+#endif /* HAL_GPIO_MODULE_ENABLED */
+
+#ifdef HAL_EXTI_MODULE_ENABLED
+  #include "stm32f4xx_hal_exti.h"
+#endif /* HAL_EXTI_MODULE_ENABLED */
+
+#ifdef HAL_DMA_MODULE_ENABLED
+  #include "stm32f4xx_hal_dma.h"
+#endif /* HAL_DMA_MODULE_ENABLED */
+   
+#ifdef HAL_CORTEX_MODULE_ENABLED
+  #include "stm32f4xx_hal_cortex.h"
+#endif /* HAL_CORTEX_MODULE_ENABLED */
+
+#ifdef HAL_ADC_MODULE_ENABLED
+  #include "stm32f4xx_hal_adc.h"
+#endif /* HAL_ADC_MODULE_ENABLED */
+
+#ifdef HAL_CAN_MODULE_ENABLED
+  #include "stm32f4xx_hal_can.h"
+#endif /* HAL_CAN_MODULE_ENABLED */
+
+#ifdef HAL_CAN_LEGACY_MODULE_ENABLED
+  #include "stm32f4xx_hal_can_legacy.h"
+#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */
+
+#ifdef HAL_CRC_MODULE_ENABLED
+  #include "stm32f4xx_hal_crc.h"
+#endif /* HAL_CRC_MODULE_ENABLED */
+
+#ifdef HAL_CRYP_MODULE_ENABLED
+  #include "stm32f4xx_hal_cryp.h" 
+#endif /* HAL_CRYP_MODULE_ENABLED */
+
+#ifdef HAL_DMA2D_MODULE_ENABLED
+  #include "stm32f4xx_hal_dma2d.h"
+#endif /* HAL_DMA2D_MODULE_ENABLED */
+
+#ifdef HAL_DAC_MODULE_ENABLED
+  #include "stm32f4xx_hal_dac.h"
+#endif /* HAL_DAC_MODULE_ENABLED */
+
+#ifdef HAL_DCMI_MODULE_ENABLED
+  #include "stm32f4xx_hal_dcmi.h"
+#endif /* HAL_DCMI_MODULE_ENABLED */
+
+#ifdef HAL_ETH_MODULE_ENABLED
+  #include "stm32f4xx_hal_eth.h"
+#endif /* HAL_ETH_MODULE_ENABLED */
+
+#ifdef HAL_FLASH_MODULE_ENABLED
+  #include "stm32f4xx_hal_flash.h"
+#endif /* HAL_FLASH_MODULE_ENABLED */
+ 
+#ifdef HAL_SRAM_MODULE_ENABLED
+  #include "stm32f4xx_hal_sram.h"
+#endif /* HAL_SRAM_MODULE_ENABLED */
+
+#ifdef HAL_NOR_MODULE_ENABLED
+  #include "stm32f4xx_hal_nor.h"
+#endif /* HAL_NOR_MODULE_ENABLED */
+
+#ifdef HAL_NAND_MODULE_ENABLED
+  #include "stm32f4xx_hal_nand.h"
+#endif /* HAL_NAND_MODULE_ENABLED */
+
+#ifdef HAL_PCCARD_MODULE_ENABLED
+  #include "stm32f4xx_hal_pccard.h"
+#endif /* HAL_PCCARD_MODULE_ENABLED */ 
+  
+#ifdef HAL_SDRAM_MODULE_ENABLED
+  #include "stm32f4xx_hal_sdram.h"
+#endif /* HAL_SDRAM_MODULE_ENABLED */
+
+#ifdef HAL_HASH_MODULE_ENABLED
+ #include "stm32f4xx_hal_hash.h"
+#endif /* HAL_HASH_MODULE_ENABLED */
+
+#ifdef HAL_I2C_MODULE_ENABLED
+ #include "stm32f4xx_hal_i2c.h"
+#endif /* HAL_I2C_MODULE_ENABLED */
+
+#ifdef HAL_SMBUS_MODULE_ENABLED
+ #include "stm32f4xx_hal_smbus.h"
+#endif /* HAL_SMBUS_MODULE_ENABLED */
+
+#ifdef HAL_I2S_MODULE_ENABLED
+ #include "stm32f4xx_hal_i2s.h"
+#endif /* HAL_I2S_MODULE_ENABLED */
+
+#ifdef HAL_IWDG_MODULE_ENABLED
+ #include "stm32f4xx_hal_iwdg.h"
+#endif /* HAL_IWDG_MODULE_ENABLED */
+
+#ifdef HAL_LTDC_MODULE_ENABLED
+ #include "stm32f4xx_hal_ltdc.h"
+#endif /* HAL_LTDC_MODULE_ENABLED */
+
+#ifdef HAL_PWR_MODULE_ENABLED
+ #include "stm32f4xx_hal_pwr.h"
+#endif /* HAL_PWR_MODULE_ENABLED */
+
+#ifdef HAL_RNG_MODULE_ENABLED
+ #include "stm32f4xx_hal_rng.h"
+#endif /* HAL_RNG_MODULE_ENABLED */
+
+#ifdef HAL_RTC_MODULE_ENABLED
+ #include "stm32f4xx_hal_rtc.h"
+#endif /* HAL_RTC_MODULE_ENABLED */
+
+#ifdef HAL_SAI_MODULE_ENABLED
+ #include "stm32f4xx_hal_sai.h"
+#endif /* HAL_SAI_MODULE_ENABLED */
+
+#ifdef HAL_SD_MODULE_ENABLED
+ #include "stm32f4xx_hal_sd.h"
+#endif /* HAL_SD_MODULE_ENABLED */
+
+#ifdef HAL_SPI_MODULE_ENABLED
+ #include "stm32f4xx_hal_spi.h"
+#endif /* HAL_SPI_MODULE_ENABLED */
+
+#ifdef HAL_TIM_MODULE_ENABLED
+ #include "stm32f4xx_hal_tim.h"
+#endif /* HAL_TIM_MODULE_ENABLED */
+
+#ifdef HAL_UART_MODULE_ENABLED
+ #include "stm32f4xx_hal_uart.h"
+#endif /* HAL_UART_MODULE_ENABLED */
+
+#ifdef HAL_USART_MODULE_ENABLED
+ #include "stm32f4xx_hal_usart.h"
+#endif /* HAL_USART_MODULE_ENABLED */
+
+#ifdef HAL_IRDA_MODULE_ENABLED
+ #include "stm32f4xx_hal_irda.h"
+#endif /* HAL_IRDA_MODULE_ENABLED */
+
+#ifdef HAL_SMARTCARD_MODULE_ENABLED
+ #include "stm32f4xx_hal_smartcard.h"
+#endif /* HAL_SMARTCARD_MODULE_ENABLED */
+
+#ifdef HAL_WWDG_MODULE_ENABLED
+ #include "stm32f4xx_hal_wwdg.h"
+#endif /* HAL_WWDG_MODULE_ENABLED */
+
+#ifdef HAL_PCD_MODULE_ENABLED
+ #include "stm32f4xx_hal_pcd.h"
+#endif /* HAL_PCD_MODULE_ENABLED */
+
+#ifdef HAL_HCD_MODULE_ENABLED
+ #include "stm32f4xx_hal_hcd.h"
+#endif /* HAL_HCD_MODULE_ENABLED */
+   
+#ifdef HAL_DSI_MODULE_ENABLED
+ #include "stm32f4xx_hal_dsi.h"
+#endif /* HAL_DSI_MODULE_ENABLED */
+
+#ifdef HAL_QSPI_MODULE_ENABLED
+ #include "stm32f4xx_hal_qspi.h"
+#endif /* HAL_QSPI_MODULE_ENABLED */
+
+#ifdef HAL_CEC_MODULE_ENABLED
+ #include "stm32f4xx_hal_cec.h"
+#endif /* HAL_CEC_MODULE_ENABLED */
+
+#ifdef HAL_FMPI2C_MODULE_ENABLED
+ #include "stm32f4xx_hal_fmpi2c.h"
+#endif /* HAL_FMPI2C_MODULE_ENABLED */
+
+#ifdef HAL_FMPSMBUS_MODULE_ENABLED
+ #include "stm32f4xx_hal_fmpsmbus.h"
+#endif /* HAL_FMPSMBUS_MODULE_ENABLED */
+
+#ifdef HAL_SPDIFRX_MODULE_ENABLED
+ #include "stm32f4xx_hal_spdifrx.h"
+#endif /* HAL_SPDIFRX_MODULE_ENABLED */
+
+#ifdef HAL_DFSDM_MODULE_ENABLED
+ #include "stm32f4xx_hal_dfsdm.h"
+#endif /* HAL_DFSDM_MODULE_ENABLED */
+
+#ifdef HAL_LPTIM_MODULE_ENABLED
+ #include "stm32f4xx_hal_lptim.h"
+#endif /* HAL_LPTIM_MODULE_ENABLED */
+
+#ifdef HAL_MMC_MODULE_ENABLED
+ #include "stm32f4xx_hal_mmc.h"
+#endif /* HAL_MMC_MODULE_ENABLED */
+
+/* Exported macro ------------------------------------------------------------*/
+#ifdef  USE_FULL_ASSERT
+/**
+  * @brief  The assert_param macro is used for function's parameters check.
+  * @param  expr If expr is false, it calls assert_failed function
+  *         which reports the name of the source file and the source
+  *         line number of the call that failed. 
+  *         If expr is true, it returns no value.
+  * @retval None
+  */
+  #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
+/* Exported functions ------------------------------------------------------- */
+  void assert_failed(uint8_t* file, uint32_t line);
+#else
+  #define assert_param(expr) ((void)0U)
+#endif /* USE_FULL_ASSERT */
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_CONF_H */
+ 
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

libs/STM32_HAL/include/cmsis/cmsis_device.h

@@ -5,3 +5,7 @@
 #ifdef STM32F072xB
 #include <cmsis/device/stm32f072xb.h>
 #endif
+
+#ifdef STM32F407xx
+#include <cmsis/device/stm32f407xx.h>
+#endif

libs/STM32_HAL/include/cmsis/device/mpu_armv7.h

@@ -0,0 +1,270 @@
+/******************************************************************************
+ * @file     mpu_armv7.h
+ * @brief    CMSIS MPU API for Armv7-M MPU
+ * @version  V5.0.4
+ * @date     10. January 2018
+ ******************************************************************************/
+/*
+ * Copyright (c) 2017-2018 Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+ 
+#if   defined ( __ICCARM__ )
+  #pragma system_include         /* treat file as system include file for MISRA check */
+#elif defined (__clang__)
+  #pragma clang system_header    /* treat file as system include file */
+#endif
+ 
+#ifndef ARM_MPU_ARMV7_H
+#define ARM_MPU_ARMV7_H
+
+#define ARM_MPU_REGION_SIZE_32B      ((uint8_t)0x04U) ///!< MPU Region Size 32 Bytes
+#define ARM_MPU_REGION_SIZE_64B      ((uint8_t)0x05U) ///!< MPU Region Size 64 Bytes
+#define ARM_MPU_REGION_SIZE_128B     ((uint8_t)0x06U) ///!< MPU Region Size 128 Bytes
+#define ARM_MPU_REGION_SIZE_256B     ((uint8_t)0x07U) ///!< MPU Region Size 256 Bytes
+#define ARM_MPU_REGION_SIZE_512B     ((uint8_t)0x08U) ///!< MPU Region Size 512 Bytes
+#define ARM_MPU_REGION_SIZE_1KB      ((uint8_t)0x09U) ///!< MPU Region Size 1 KByte
+#define ARM_MPU_REGION_SIZE_2KB      ((uint8_t)0x0AU) ///!< MPU Region Size 2 KBytes
+#define ARM_MPU_REGION_SIZE_4KB      ((uint8_t)0x0BU) ///!< MPU Region Size 4 KBytes
+#define ARM_MPU_REGION_SIZE_8KB      ((uint8_t)0x0CU) ///!< MPU Region Size 8 KBytes
+#define ARM_MPU_REGION_SIZE_16KB     ((uint8_t)0x0DU) ///!< MPU Region Size 16 KBytes
+#define ARM_MPU_REGION_SIZE_32KB     ((uint8_t)0x0EU) ///!< MPU Region Size 32 KBytes
+#define ARM_MPU_REGION_SIZE_64KB     ((uint8_t)0x0FU) ///!< MPU Region Size 64 KBytes
+#define ARM_MPU_REGION_SIZE_128KB    ((uint8_t)0x10U) ///!< MPU Region Size 128 KBytes
+#define ARM_MPU_REGION_SIZE_256KB    ((uint8_t)0x11U) ///!< MPU Region Size 256 KBytes
+#define ARM_MPU_REGION_SIZE_512KB    ((uint8_t)0x12U) ///!< MPU Region Size 512 KBytes
+#define ARM_MPU_REGION_SIZE_1MB      ((uint8_t)0x13U) ///!< MPU Region Size 1 MByte
+#define ARM_MPU_REGION_SIZE_2MB      ((uint8_t)0x14U) ///!< MPU Region Size 2 MBytes
+#define ARM_MPU_REGION_SIZE_4MB      ((uint8_t)0x15U) ///!< MPU Region Size 4 MBytes
+#define ARM_MPU_REGION_SIZE_8MB      ((uint8_t)0x16U) ///!< MPU Region Size 8 MBytes
+#define ARM_MPU_REGION_SIZE_16MB     ((uint8_t)0x17U) ///!< MPU Region Size 16 MBytes
+#define ARM_MPU_REGION_SIZE_32MB     ((uint8_t)0x18U) ///!< MPU Region Size 32 MBytes
+#define ARM_MPU_REGION_SIZE_64MB     ((uint8_t)0x19U) ///!< MPU Region Size 64 MBytes
+#define ARM_MPU_REGION_SIZE_128MB    ((uint8_t)0x1AU) ///!< MPU Region Size 128 MBytes
+#define ARM_MPU_REGION_SIZE_256MB    ((uint8_t)0x1BU) ///!< MPU Region Size 256 MBytes
+#define ARM_MPU_REGION_SIZE_512MB    ((uint8_t)0x1CU) ///!< MPU Region Size 512 MBytes
+#define ARM_MPU_REGION_SIZE_1GB      ((uint8_t)0x1DU) ///!< MPU Region Size 1 GByte
+#define ARM_MPU_REGION_SIZE_2GB      ((uint8_t)0x1EU) ///!< MPU Region Size 2 GBytes
+#define ARM_MPU_REGION_SIZE_4GB      ((uint8_t)0x1FU) ///!< MPU Region Size 4 GBytes
+
+#define ARM_MPU_AP_NONE 0U ///!< MPU Access Permission no access
+#define ARM_MPU_AP_PRIV 1U ///!< MPU Access Permission privileged access only
+#define ARM_MPU_AP_URO  2U ///!< MPU Access Permission unprivileged access read-only
+#define ARM_MPU_AP_FULL 3U ///!< MPU Access Permission full access
+#define ARM_MPU_AP_PRO  5U ///!< MPU Access Permission privileged access read-only
+#define ARM_MPU_AP_RO   6U ///!< MPU Access Permission read-only access
+
+/** MPU Region Base Address Register Value
+*
+* \param Region The region to be configured, number 0 to 15.
+* \param BaseAddress The base address for the region.
+*/
+#define ARM_MPU_RBAR(Region, BaseAddress) \
+  (((BaseAddress) & MPU_RBAR_ADDR_Msk) |  \
+   ((Region) & MPU_RBAR_REGION_Msk)    |  \
+   (MPU_RBAR_VALID_Msk))
+
+/**
+* MPU Memory Access Attributes
+* 
+* \param TypeExtField      Type extension field, allows you to configure memory access type, for example strongly ordered, peripheral.
+* \param IsShareable       Region is shareable between multiple bus masters.
+* \param IsCacheable       Region is cacheable, i.e. its value may be kept in cache.
+* \param IsBufferable      Region is bufferable, i.e. using write-back caching. Cacheable but non-bufferable regions use write-through policy.
+*/  
+#define ARM_MPU_ACCESS_(TypeExtField, IsShareable, IsCacheable, IsBufferable)   \
+  ((((TypeExtField ) << MPU_RASR_TEX_Pos) & MPU_RASR_TEX_Msk)                 | \
+   (((IsShareable ) << MPU_RASR_S_Pos) & MPU_RASR_S_Msk)                      | \
+   (((IsCacheable ) << MPU_RASR_C_Pos) & MPU_RASR_C_Msk)                      | \
+   (((IsBufferable ) << MPU_RASR_B_Pos) & MPU_RASR_B_Msk))
+
+/**
+* MPU Region Attribute and Size Register Value
+* 
+* \param DisableExec       Instruction access disable bit, 1= disable instruction fetches.
+* \param AccessPermission  Data access permissions, allows you to configure read/write access for User and Privileged mode.
+* \param AccessAttributes  Memory access attribution, see \ref ARM_MPU_ACCESS_.
+* \param SubRegionDisable  Sub-region disable field.
+* \param Size              Region size of the region to be configured, for example 4K, 8K.
+*/
+#define ARM_MPU_RASR_EX(DisableExec, AccessPermission, AccessAttributes, SubRegionDisable, Size)      \
+  ((((DisableExec ) << MPU_RASR_XN_Pos) & MPU_RASR_XN_Msk)                                          | \
+   (((AccessPermission) << MPU_RASR_AP_Pos) & MPU_RASR_AP_Msk)                                      | \
+   (((AccessAttributes) ) & (MPU_RASR_TEX_Msk | MPU_RASR_S_Msk | MPU_RASR_C_Msk | MPU_RASR_B_Msk)))
+  
+/**
+* MPU Region Attribute and Size Register Value
+* 
+* \param DisableExec       Instruction access disable bit, 1= disable instruction fetches.
+* \param AccessPermission  Data access permissions, allows you to configure read/write access for User and Privileged mode.
+* \param TypeExtField      Type extension field, allows you to configure memory access type, for example strongly ordered, peripheral.
+* \param IsShareable       Region is shareable between multiple bus masters.
+* \param IsCacheable       Region is cacheable, i.e. its value may be kept in cache.
+* \param IsBufferable      Region is bufferable, i.e. using write-back caching. Cacheable but non-bufferable regions use write-through policy.
+* \param SubRegionDisable  Sub-region disable field.
+* \param Size              Region size of the region to be configured, for example 4K, 8K.
+*/                         
+#define ARM_MPU_RASR(DisableExec, AccessPermission, TypeExtField, IsShareable, IsCacheable, IsBufferable, SubRegionDisable, Size) \
+  ARM_MPU_RASR_EX(DisableExec, AccessPermission, ARM_MPU_ACCESS_(TypeExtField, IsShareable, IsCacheable, IsBufferable), SubRegionDisable, Size)
+
+/**
+* MPU Memory Access Attribute for strongly ordered memory.
+*  - TEX: 000b
+*  - Shareable
+*  - Non-cacheable
+*  - Non-bufferable
+*/ 
+#define ARM_MPU_ACCESS_ORDERED ARM_MPU_ACCESS_(0U, 1U, 0U, 0U)
+
+/**
+* MPU Memory Access Attribute for device memory.
+*  - TEX: 000b (if non-shareable) or 010b (if shareable)
+*  - Shareable or non-shareable
+*  - Non-cacheable
+*  - Bufferable (if shareable) or non-bufferable (if non-shareable)
+*
+* \param IsShareable Configures the device memory as shareable or non-shareable.
+*/ 
+#define ARM_MPU_ACCESS_DEVICE(IsShareable) ((IsShareable) ? ARM_MPU_ACCESS_(0U, 1U, 0U, 1U) : ARM_MPU_ACCESS_(2U, 0U, 0U, 0U))
+
+/**
+* MPU Memory Access Attribute for normal memory.
+*  - TEX: 1BBb (reflecting outer cacheability rules)
+*  - Shareable or non-shareable
+*  - Cacheable or non-cacheable (reflecting inner cacheability rules)
+*  - Bufferable or non-bufferable (reflecting inner cacheability rules)
+*
+* \param OuterCp Configures the outer cache policy.
+* \param InnerCp Configures the inner cache policy.
+* \param IsShareable Configures the memory as shareable or non-shareable.
+*/ 
+#define ARM_MPU_ACCESS_NORMAL(OuterCp, InnerCp, IsShareable) ARM_MPU_ACCESS_((4U | (OuterCp)), IsShareable, ((InnerCp) & 2U), ((InnerCp) & 1U))
+
+/**
+* MPU Memory Access Attribute non-cacheable policy.
+*/
+#define ARM_MPU_CACHEP_NOCACHE 0U
+
+/**
+* MPU Memory Access Attribute write-back, write and read allocate policy.
+*/
+#define ARM_MPU_CACHEP_WB_WRA 1U
+
+/**
+* MPU Memory Access Attribute write-through, no write allocate policy.
+*/
+#define ARM_MPU_CACHEP_WT_NWA 2U
+
+/**
+* MPU Memory Access Attribute write-back, no write allocate policy.
+*/
+#define ARM_MPU_CACHEP_WB_NWA 3U
+
+
+/**
+* Struct for a single MPU Region
+*/
+typedef struct {
+  uint32_t RBAR; //!< The region base address register value (RBAR)
+  uint32_t RASR; //!< The region attribute and size register value (RASR) \ref MPU_RASR
+} ARM_MPU_Region_t;
+    
+/** Enable the MPU.
+* \param MPU_Control Default access permissions for unconfigured regions.
+*/
+__STATIC_INLINE void ARM_MPU_Enable(uint32_t MPU_Control)
+{
+  __DSB();
+  __ISB();
+  MPU->CTRL = MPU_Control | MPU_CTRL_ENABLE_Msk;
+#ifdef SCB_SHCSR_MEMFAULTENA_Msk
+  SCB->SHCSR |= SCB_SHCSR_MEMFAULTENA_Msk;
+#endif
+}
+
+/** Disable the MPU.
+*/
+__STATIC_INLINE void ARM_MPU_Disable(void)
+{
+  __DSB();
+  __ISB();
+#ifdef SCB_SHCSR_MEMFAULTENA_Msk
+  SCB->SHCSR &= ~SCB_SHCSR_MEMFAULTENA_Msk;
+#endif
+  MPU->CTRL  &= ~MPU_CTRL_ENABLE_Msk;
+}
+
+/** Clear and disable the given MPU region.
+* \param rnr Region number to be cleared.
+*/
+__STATIC_INLINE void ARM_MPU_ClrRegion(uint32_t rnr)
+{
+  MPU->RNR = rnr;
+  MPU->RASR = 0U;
+}
+
+/** Configure an MPU region.
+* \param rbar Value for RBAR register.
+* \param rsar Value for RSAR register.
+*/   
+__STATIC_INLINE void ARM_MPU_SetRegion(uint32_t rbar, uint32_t rasr)
+{
+  MPU->RBAR = rbar;
+  MPU->RASR = rasr;
+}
+
+/** Configure the given MPU region.
+* \param rnr Region number to be configured.
+* \param rbar Value for RBAR register.
+* \param rsar Value for RSAR register.
+*/   
+__STATIC_INLINE void ARM_MPU_SetRegionEx(uint32_t rnr, uint32_t rbar, uint32_t rasr)
+{
+  MPU->RNR = rnr;
+  MPU->RBAR = rbar;
+  MPU->RASR = rasr;
+}
+
+/** Memcopy with strictly ordered memory access, e.g. for register targets.
+* \param dst Destination data is copied to.
+* \param src Source data is copied from.
+* \param len Amount of data words to be copied.
+*/
+__STATIC_INLINE void orderedCpy(volatile uint32_t* dst, const uint32_t* __RESTRICT src, uint32_t len)
+{
+  uint32_t i;
+  for (i = 0U; i < len; ++i) 
+  {
+    dst[i] = src[i];
+  }
+}
+
+/** Load the given number of MPU regions from a table.
+* \param table Pointer to the MPU configuration table.
+* \param cnt Amount of regions to be configured.
+*/
+__STATIC_INLINE void ARM_MPU_Load(ARM_MPU_Region_t const* table, uint32_t cnt) 
+{
+  const uint32_t rowWordSize = sizeof(ARM_MPU_Region_t)/4U;
+  while (cnt > MPU_TYPE_RALIASES) {
+    orderedCpy(&(MPU->RBAR), &(table->RBAR), MPU_TYPE_RALIASES*rowWordSize);
+    table += MPU_TYPE_RALIASES;
+    cnt -= MPU_TYPE_RALIASES;
+  }
+  orderedCpy(&(MPU->RBAR), &(table->RBAR), cnt*rowWordSize);
+}
+
+#endif

libs/STM32_HAL/include/cmsis/device/stm32f4xx.h

@@ -0,0 +1,307 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx.h
+  * @author  MCD Application Team
+  * @brief   CMSIS STM32F4xx Device Peripheral Access Layer Header File.
+  *            
+  *          The file is the unique include file that the application programmer
+  *          is using in the C source code, usually in main.c. This file contains:
+  *           - Configuration section that allows to select:
+  *              - The STM32F4xx device used in the target application
+  *              - To use or not the peripheral<EFBFBD>s drivers in application code(i.e. 
+  *                code will be based on direct access to peripheral<EFBFBD>s registers 
+  *                rather than drivers API), this option is controlled by 
+  *                "#define USE_HAL_DRIVER"
+  *  
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/** @addtogroup CMSIS
+  * @{
+  */
+
+/** @addtogroup stm32f4xx
+  * @{
+  */
+    
+#ifndef __STM32F4xx_H
+#define __STM32F4xx_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif /* __cplusplus */
+   
+/** @addtogroup Library_configuration_section
+  * @{
+  */
+  
+/**
+  * @brief STM32 Family
+  */
+#if !defined  (STM32F4)
+#define STM32F4
+#endif /* STM32F4 */
+
+/* Uncomment the line below according to the target STM32 device used in your
+   application 
+  */
+#if !defined (STM32F405xx) && !defined (STM32F415xx) && !defined (STM32F407xx) && !defined (STM32F417xx) && \
+    !defined (STM32F427xx) && !defined (STM32F437xx) && !defined (STM32F429xx) && !defined (STM32F439xx) && \
+    !defined (STM32F401xC) && !defined (STM32F401xE) && !defined (STM32F410Tx) && !defined (STM32F410Cx) && \
+    !defined (STM32F410Rx) && !defined (STM32F411xE) && !defined (STM32F446xx) && !defined (STM32F469xx) && \
+    !defined (STM32F479xx) && !defined (STM32F412Cx) && !defined (STM32F412Rx) && !defined (STM32F412Vx) && \
+    !defined (STM32F412Zx) && !defined (STM32F413xx) && !defined (STM32F423xx)
+  /* #define STM32F405xx */   /*!< STM32F405RG, STM32F405VG and STM32F405ZG Devices */
+  /* #define STM32F415xx */   /*!< STM32F415RG, STM32F415VG and STM32F415ZG Devices */
+  /* #define STM32F407xx */   /*!< STM32F407VG, STM32F407VE, STM32F407ZG, STM32F407ZE, STM32F407IG  and STM32F407IE Devices */
+  /* #define STM32F417xx */   /*!< STM32F417VG, STM32F417VE, STM32F417ZG, STM32F417ZE, STM32F417IG and STM32F417IE Devices */
+  /* #define STM32F427xx */   /*!< STM32F427VG, STM32F427VI, STM32F427ZG, STM32F427ZI, STM32F427IG and STM32F427II Devices */
+  /* #define STM32F437xx */   /*!< STM32F437VG, STM32F437VI, STM32F437ZG, STM32F437ZI, STM32F437IG and STM32F437II Devices */
+  /* #define STM32F429xx */   /*!< STM32F429VG, STM32F429VI, STM32F429ZG, STM32F429ZI, STM32F429BG, STM32F429BI, STM32F429NG, 
+                                   STM32F439NI, STM32F429IG  and STM32F429II Devices */
+  /* #define STM32F439xx */   /*!< STM32F439VG, STM32F439VI, STM32F439ZG, STM32F439ZI, STM32F439BG, STM32F439BI, STM32F439NG, 
+                                   STM32F439NI, STM32F439IG and STM32F439II Devices */
+  /* #define STM32F401xC */   /*!< STM32F401CB, STM32F401CC, STM32F401RB, STM32F401RC, STM32F401VB and STM32F401VC Devices */
+  /* #define STM32F401xE */   /*!< STM32F401CD, STM32F401RD, STM32F401VD, STM32F401CE, STM32F401RE and STM32F401VE Devices */
+  /* #define STM32F410Tx */   /*!< STM32F410T8 and STM32F410TB Devices */
+  /* #define STM32F410Cx */   /*!< STM32F410C8 and STM32F410CB Devices */
+  /* #define STM32F410Rx */   /*!< STM32F410R8 and STM32F410RB Devices */
+  /* #define STM32F411xE */   /*!< STM32F411CC, STM32F411RC, STM32F411VC, STM32F411CE, STM32F411RE and STM32F411VE Devices */
+  /* #define STM32F446xx */   /*!< STM32F446MC, STM32F446ME, STM32F446RC, STM32F446RE, STM32F446VC, STM32F446VE, STM32F446ZC, 
+                                   and STM32F446ZE Devices */
+  /* #define STM32F469xx */   /*!< STM32F469AI, STM32F469II, STM32F469BI, STM32F469NI, STM32F469AG, STM32F469IG, STM32F469BG, 
+                                   STM32F469NG, STM32F469AE, STM32F469IE, STM32F469BE and STM32F469NE Devices */
+  /* #define STM32F479xx */   /*!< STM32F479AI, STM32F479II, STM32F479BI, STM32F479NI, STM32F479AG, STM32F479IG, STM32F479BG 
+                                   and STM32F479NG Devices */
+  /* #define STM32F412Cx */   /*!< STM32F412CEU and STM32F412CGU Devices */
+  /* #define STM32F412Zx */   /*!< STM32F412ZET, STM32F412ZGT, STM32F412ZEJ and STM32F412ZGJ Devices */
+  /* #define STM32F412Vx */   /*!< STM32F412VET, STM32F412VGT, STM32F412VEH and STM32F412VGH Devices */
+  /* #define STM32F412Rx */   /*!< STM32F412RET, STM32F412RGT, STM32F412REY and STM32F412RGY Devices */
+  /* #define STM32F413xx */   /*!< STM32F413CH, STM32F413MH, STM32F413RH, STM32F413VH, STM32F413ZH, STM32F413CG, STM32F413MG,
+                                   STM32F413RG, STM32F413VG and STM32F413ZG Devices */
+  /* #define STM32F423xx */   /*!< STM32F423CH, STM32F423RH, STM32F423VH and STM32F423ZH Devices */
+#endif
+   
+/*  Tip: To avoid modifying this file each time you need to switch between these
+        devices, you can define the device in your toolchain compiler preprocessor.
+  */
+#if !defined  (USE_HAL_DRIVER)
+/**
+ * @brief Comment the line below if you will not use the peripherals drivers.
+   In this case, these drivers will not be included and the application code will 
+   be based on direct access to peripherals registers 
+   */
+  /*#define USE_HAL_DRIVER */
+#endif /* USE_HAL_DRIVER */
+
+/**
+  * @brief CMSIS version number V2.6.7
+  */
+#define __STM32F4xx_CMSIS_VERSION_MAIN   (0x02U) /*!< [31:24] main version */
+#define __STM32F4xx_CMSIS_VERSION_SUB1   (0x06U) /*!< [23:16] sub1 version */
+#define __STM32F4xx_CMSIS_VERSION_SUB2   (0x07U) /*!< [15:8]  sub2 version */
+#define __STM32F4xx_CMSIS_VERSION_RC     (0x00U) /*!< [7:0]  release candidate */
+#define __STM32F4xx_CMSIS_VERSION        ((__STM32F4xx_CMSIS_VERSION_MAIN << 24)\
+                                         |(__STM32F4xx_CMSIS_VERSION_SUB1 << 16)\
+                                         |(__STM32F4xx_CMSIS_VERSION_SUB2 << 8 )\
+                                         |(__STM32F4xx_CMSIS_VERSION_RC))
+
+/**
+  * @}
+  */
+
+/** @addtogroup Device_Included
+  * @{
+  */
+
+#if defined(STM32F405xx)
+  #include "stm32f405xx.h"
+#elif defined(STM32F415xx)
+  #include "stm32f415xx.h"
+#elif defined(STM32F407xx)
+  #include "stm32f407xx.h"
+#elif defined(STM32F417xx)
+  #include "stm32f417xx.h"
+#elif defined(STM32F427xx)
+  #include "stm32f427xx.h"
+#elif defined(STM32F437xx)
+  #include "stm32f437xx.h"
+#elif defined(STM32F429xx)
+  #include "stm32f429xx.h"
+#elif defined(STM32F439xx)
+  #include "stm32f439xx.h"
+#elif defined(STM32F401xC)
+  #include "stm32f401xc.h"
+#elif defined(STM32F401xE)
+  #include "stm32f401xe.h"
+#elif defined(STM32F410Tx)
+  #include "stm32f410tx.h"
+#elif defined(STM32F410Cx)
+  #include "stm32f410cx.h"
+#elif defined(STM32F410Rx)
+  #include "stm32f410rx.h"
+#elif defined(STM32F411xE)
+  #include "stm32f411xe.h"
+#elif defined(STM32F446xx)
+  #include "stm32f446xx.h"
+#elif defined(STM32F469xx)
+  #include "stm32f469xx.h"
+#elif defined(STM32F479xx)
+  #include "stm32f479xx.h"
+#elif defined(STM32F412Cx)
+  #include "stm32f412cx.h"
+#elif defined(STM32F412Zx)
+  #include "stm32f412zx.h"
+#elif defined(STM32F412Rx)
+  #include "stm32f412rx.h"
+#elif defined(STM32F412Vx)
+  #include "stm32f412vx.h"
+#elif defined(STM32F413xx)
+  #include "stm32f413xx.h"
+#elif defined(STM32F423xx)
+  #include "stm32f423xx.h"
+#else
+ #error "Please select first the target STM32F4xx device used in your application (in stm32f4xx.h file)"
+#endif
+
+/**
+  * @}
+  */
+
+/** @addtogroup Exported_types
+  * @{
+  */ 
+typedef enum 
+{
+  RESET = 0U, 
+  SET = !RESET
+} FlagStatus, ITStatus;
+
+typedef enum 
+{
+  DISABLE = 0U, 
+  ENABLE = !DISABLE
+} FunctionalState;
+#define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE))
+
+typedef enum
+{
+  SUCCESS = 0U,
+  ERROR = !SUCCESS
+} ErrorStatus;
+
+/**
+  * @}
+  */
+
+
+/** @addtogroup Exported_macro
+  * @{
+  */
+#define SET_BIT(REG, BIT)     ((REG) |= (BIT))
+
+#define CLEAR_BIT(REG, BIT)   ((REG) &= ~(BIT))
+
+#define READ_BIT(REG, BIT)    ((REG) & (BIT))
+
+#define CLEAR_REG(REG)        ((REG) = (0x0))
+
+#define WRITE_REG(REG, VAL)   ((REG) = (VAL))
+
+#define READ_REG(REG)         ((REG))
+
+#define MODIFY_REG(REG, CLEARMASK, SETMASK)  WRITE_REG((REG), (((READ_REG(REG)) & (~(CLEARMASK))) | (SETMASK)))
+
+#define POSITION_VAL(VAL)     (__CLZ(__RBIT(VAL))) 
+
+/* Use of CMSIS compiler intrinsics for register exclusive access */
+/* Atomic 32-bit register access macro to set one or several bits */
+#define ATOMIC_SET_BIT(REG, BIT)                             \
+  do {                                                       \
+    uint32_t val;                                            \
+    do {                                                     \
+      val = __LDREXW((__IO uint32_t *)&(REG)) | (BIT);       \
+    } while ((__STREXW(val,(__IO uint32_t *)&(REG))) != 0U); \
+  } while(0)
+
+/* Atomic 32-bit register access macro to clear one or several bits */
+#define ATOMIC_CLEAR_BIT(REG, BIT)                           \
+  do {                                                       \
+    uint32_t val;                                            \
+    do {                                                     \
+      val = __LDREXW((__IO uint32_t *)&(REG)) & ~(BIT);      \
+    } while ((__STREXW(val,(__IO uint32_t *)&(REG))) != 0U); \
+  } while(0)
+
+/* Atomic 32-bit register access macro to clear and set one or several bits */
+#define ATOMIC_MODIFY_REG(REG, CLEARMSK, SETMASK)                          \
+  do {                                                                     \
+    uint32_t val;                                                          \
+    do {                                                                   \
+      val = (__LDREXW((__IO uint32_t *)&(REG)) & ~(CLEARMSK)) | (SETMASK); \
+    } while ((__STREXW(val,(__IO uint32_t *)&(REG))) != 0U);               \
+  } while(0)
+
+/* Atomic 16-bit register access macro to set one or several bits */
+#define ATOMIC_SETH_BIT(REG, BIT)                            \
+  do {                                                       \
+    uint16_t val;                                            \
+    do {                                                     \
+      val = __LDREXH((__IO uint16_t *)&(REG)) | (BIT);       \
+    } while ((__STREXH(val,(__IO uint16_t *)&(REG))) != 0U); \
+  } while(0)
+
+/* Atomic 16-bit register access macro to clear one or several bits */
+#define ATOMIC_CLEARH_BIT(REG, BIT)                          \
+  do {                                                       \
+    uint16_t val;                                            \
+    do {                                                     \
+      val = __LDREXH((__IO uint16_t *)&(REG)) & ~(BIT);      \
+    } while ((__STREXH(val,(__IO uint16_t *)&(REG))) != 0U); \
+  } while(0)
+
+/* Atomic 16-bit register access macro to clear and set one or several bits */
+#define ATOMIC_MODIFYH_REG(REG, CLEARMSK, SETMASK)                         \
+  do {                                                                     \
+    uint16_t val;                                                          \
+    do {                                                                   \
+      val = (__LDREXH((__IO uint16_t *)&(REG)) & ~(CLEARMSK)) | (SETMASK); \
+    } while ((__STREXH(val,(__IO uint16_t *)&(REG))) != 0U);               \
+  } while(0)
+
+/**
+  * @}
+  */
+
+#if defined (USE_HAL_DRIVER)
+ #include "stm32f4xx_hal.h"
+#endif /* USE_HAL_DRIVER */
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* __STM32F4xx_H */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+  
+
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

libs/STM32_HAL/include/cmsis/device/system_stm32f4xx.h

@@ -0,0 +1,122 @@
+/**
+  ******************************************************************************
+  * @file    system_stm32f4xx.h
+  * @author  MCD Application Team
+  * @brief   CMSIS Cortex-M4 Device System Source File for STM32F4xx devices.       
+  ******************************************************************************  
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************  
+  */ 
+
+/** @addtogroup CMSIS
+  * @{
+  */
+
+/** @addtogroup stm32f4xx_system
+  * @{
+  */  
+  
+/**
+  * @brief Define to prevent recursive inclusion
+  */
+#ifndef __SYSTEM_STM32F4XX_H
+#define __SYSTEM_STM32F4XX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif 
+
+/** @addtogroup STM32F4xx_System_Includes
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+
+/** @addtogroup STM32F4xx_System_Exported_types
+  * @{
+  */
+  /* This variable is updated in three ways:
+      1) by calling CMSIS function SystemCoreClockUpdate()
+      2) by calling HAL API function HAL_RCC_GetSysClockFreq()
+      3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency 
+         Note: If you use this function to configure the system clock; then there
+               is no need to call the 2 first functions listed above, since SystemCoreClock
+               variable is updated automatically.
+  */
+extern uint32_t SystemCoreClock;          /*!< System Clock Frequency (Core Clock) */
+
+extern const uint8_t  AHBPrescTable[16];    /*!< AHB prescalers table values */
+extern const uint8_t  APBPrescTable[8];     /*!< APB prescalers table values */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F4xx_System_Exported_Constants
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F4xx_System_Exported_Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F4xx_System_Exported_Functions
+  * @{
+  */
+  
+extern void SystemInit(void);
+extern void SystemCoreClockUpdate(void);
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__SYSTEM_STM32F4XX_H */
+
+/**
+  * @}
+  */
+  
+/**
+  * @}
+  */  
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

libs/STM32_HAL/include/stm32f4xx/stm32f4xx_hal.h

@@ -0,0 +1,298 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal.h
+  * @author  MCD Application Team
+  * @brief   This file contains all the functions prototypes for the HAL 
+  *          module driver.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */ 
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_H
+#define __STM32F4xx_HAL_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_conf.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup HAL
+  * @{
+  */ 
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup HAL_Exported_Constants HAL Exported Constants
+  * @{
+  */
+
+/** @defgroup HAL_TICK_FREQ Tick Frequency
+  * @{
+  */
+typedef enum
+{
+  HAL_TICK_FREQ_10HZ         = 100U,
+  HAL_TICK_FREQ_100HZ        = 10U,
+  HAL_TICK_FREQ_1KHZ         = 1U,
+  HAL_TICK_FREQ_DEFAULT      = HAL_TICK_FREQ_1KHZ
+} HAL_TickFreqTypeDef;
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+   
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup HAL_Exported_Macros HAL Exported Macros
+  * @{
+  */
+
+/** @brief  Freeze/Unfreeze Peripherals in Debug mode 
+  */
+#define __HAL_DBGMCU_FREEZE_TIM2()           (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM2_STOP))
+#define __HAL_DBGMCU_FREEZE_TIM3()           (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM3_STOP))
+#define __HAL_DBGMCU_FREEZE_TIM4()           (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM4_STOP))
+#define __HAL_DBGMCU_FREEZE_TIM5()           (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM5_STOP))
+#define __HAL_DBGMCU_FREEZE_TIM6()           (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM6_STOP))
+#define __HAL_DBGMCU_FREEZE_TIM7()           (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM7_STOP))
+#define __HAL_DBGMCU_FREEZE_TIM12()          (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM12_STOP))
+#define __HAL_DBGMCU_FREEZE_TIM13()          (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM13_STOP))
+#define __HAL_DBGMCU_FREEZE_TIM14()          (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM14_STOP))
+#define __HAL_DBGMCU_FREEZE_RTC()            (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_RTC_STOP))
+#define __HAL_DBGMCU_FREEZE_WWDG()           (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_WWDG_STOP))
+#define __HAL_DBGMCU_FREEZE_IWDG()           (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_IWDG_STOP))
+#define __HAL_DBGMCU_FREEZE_I2C1_TIMEOUT()   (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT))
+#define __HAL_DBGMCU_FREEZE_I2C2_TIMEOUT()   (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_I2C2_SMBUS_TIMEOUT))
+#define __HAL_DBGMCU_FREEZE_I2C3_TIMEOUT()   (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_I2C3_SMBUS_TIMEOUT))
+#define __HAL_DBGMCU_FREEZE_CAN1()           (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_CAN1_STOP))
+#define __HAL_DBGMCU_FREEZE_CAN2()           (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_CAN2_STOP))
+#define __HAL_DBGMCU_FREEZE_TIM1()           (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM1_STOP))
+#define __HAL_DBGMCU_FREEZE_TIM8()           (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM8_STOP))
+#define __HAL_DBGMCU_FREEZE_TIM9()           (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM9_STOP))
+#define __HAL_DBGMCU_FREEZE_TIM10()          (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM10_STOP))
+#define __HAL_DBGMCU_FREEZE_TIM11()          (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM11_STOP))
+
+#define __HAL_DBGMCU_UNFREEZE_TIM2()           (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM2_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM3()           (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM3_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM4()           (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM4_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM5()           (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM5_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM6()           (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM6_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM7()           (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM7_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM12()          (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM12_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM13()          (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM13_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM14()          (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM14_STOP))
+#define __HAL_DBGMCU_UNFREEZE_RTC()            (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_RTC_STOP))
+#define __HAL_DBGMCU_UNFREEZE_WWDG()           (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_WWDG_STOP))
+#define __HAL_DBGMCU_UNFREEZE_IWDG()           (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_IWDG_STOP))
+#define __HAL_DBGMCU_UNFREEZE_I2C1_TIMEOUT()   (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT))
+#define __HAL_DBGMCU_UNFREEZE_I2C2_TIMEOUT()   (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_I2C2_SMBUS_TIMEOUT))
+#define __HAL_DBGMCU_UNFREEZE_I2C3_TIMEOUT()   (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_I2C3_SMBUS_TIMEOUT))
+#define __HAL_DBGMCU_UNFREEZE_CAN1()           (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_CAN1_STOP))
+#define __HAL_DBGMCU_UNFREEZE_CAN2()           (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_CAN2_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM1()           (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM1_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM8()           (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM8_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM9()           (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM9_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM10()          (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM10_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM11()          (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM11_STOP))
+
+/** @brief  Main Flash memory mapped at 0x00000000
+  */
+#define __HAL_SYSCFG_REMAPMEMORY_FLASH()             (SYSCFG->MEMRMP &= ~(SYSCFG_MEMRMP_MEM_MODE))
+
+/** @brief  System Flash memory mapped at 0x00000000
+  */
+#define __HAL_SYSCFG_REMAPMEMORY_SYSTEMFLASH()       do {SYSCFG->MEMRMP &= ~(SYSCFG_MEMRMP_MEM_MODE);\
+                                                         SYSCFG->MEMRMP |= SYSCFG_MEMRMP_MEM_MODE_0;\
+                                                        }while(0);
+
+/** @brief  Embedded SRAM mapped at 0x00000000
+  */
+#define __HAL_SYSCFG_REMAPMEMORY_SRAM()       do {SYSCFG->MEMRMP &= ~(SYSCFG_MEMRMP_MEM_MODE);\
+                                                  SYSCFG->MEMRMP |= (SYSCFG_MEMRMP_MEM_MODE_0 | SYSCFG_MEMRMP_MEM_MODE_1);\
+                                                 }while(0);
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx)|| defined(STM32F417xx)
+/** @brief  FSMC Bank1 (NOR/PSRAM 1 and 2) mapped at 0x00000000
+  */
+#define __HAL_SYSCFG_REMAPMEMORY_FSMC()       do {SYSCFG->MEMRMP &= ~(SYSCFG_MEMRMP_MEM_MODE);\
+                                                  SYSCFG->MEMRMP |= (SYSCFG_MEMRMP_MEM_MODE_1);\
+                                                 }while(0);
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) ||\
+    defined(STM32F469xx) || defined(STM32F479xx)
+/** @brief  FMC Bank1 (NOR/PSRAM 1 and 2) mapped at 0x00000000
+  */
+#define __HAL_SYSCFG_REMAPMEMORY_FMC()       do {SYSCFG->MEMRMP &= ~(SYSCFG_MEMRMP_MEM_MODE);\
+                                                 SYSCFG->MEMRMP |= (SYSCFG_MEMRMP_MEM_MODE_1);\
+                                                }while(0);
+
+/** @brief  FMC/SDRAM Bank 1 and 2 mapped at 0x00000000
+  */
+#define __HAL_SYSCFG_REMAPMEMORY_FMC_SDRAM()       do {SYSCFG->MEMRMP &= ~(SYSCFG_MEMRMP_MEM_MODE);\
+                                                       SYSCFG->MEMRMP |= (SYSCFG_MEMRMP_MEM_MODE_2);\
+                                                      }while(0);
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */ 
+
+#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F413xx) || defined(STM32F423xx)
+/** @defgroup Cortex_Lockup_Enable Cortex Lockup Enable
+  * @{
+  */
+/** @brief  SYSCFG Break Lockup lock
+  *         Enables and locks the connection of Cortex-M4 LOCKUP (Hardfault) output to TIM1/8 input
+  * @note   The selected configuration is locked and can be unlocked by system reset
+  */
+#define __HAL_SYSCFG_BREAK_PVD_LOCK()      do {SYSCFG->CFGR2 &= ~(SYSCFG_CFGR2_PVD_LOCK); \
+                                               SYSCFG->CFGR2 |= SYSCFG_CFGR2_PVD_LOCK;    \
+                                              }while(0)
+/**
+ * @}
+ */
+
+/** @defgroup PVD_Lock_Enable PVD Lock
+  * @{
+  */
+/** @brief  SYSCFG Break PVD lock
+  *         Enables and locks the PVD connection with Timer1/8 Break Input, , as well as the PVDE and PLS[2:0] in the PWR_CR register
+  * @note   The selected configuration is locked and can be unlocked by system reset
+  */
+#define __HAL_SYSCFG_BREAK_LOCKUP_LOCK()     do {SYSCFG->CFGR2 &= ~(SYSCFG_CFGR2_LOCKUP_LOCK); \
+                                                 SYSCFG->CFGR2 |= SYSCFG_CFGR2_LOCKUP_LOCK;    \
+                                                }while(0)
+/**
+ * @}
+ */
+#endif /* STM32F410Tx || STM32F410Cx || STM32F410Rx || STM32F413xx || STM32F423xx */
+/**
+  * @}
+  */
+
+/** @defgroup HAL_Private_Macros HAL Private Macros
+  * @{
+  */
+#define IS_TICKFREQ(FREQ) (((FREQ) == HAL_TICK_FREQ_10HZ)  || \
+                           ((FREQ) == HAL_TICK_FREQ_100HZ) || \
+                           ((FREQ) == HAL_TICK_FREQ_1KHZ))
+/**
+  * @}
+  */
+
+/* Exported variables --------------------------------------------------------*/
+
+/** @addtogroup HAL_Exported_Variables
+  * @{
+  */
+extern __IO uint32_t uwTick;
+extern uint32_t uwTickPrio;
+extern HAL_TickFreqTypeDef uwTickFreq;
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup HAL_Exported_Functions
+  * @{
+  */
+/** @addtogroup HAL_Exported_Functions_Group1
+  * @{
+  */
+/* Initialization and Configuration functions  ******************************/
+HAL_StatusTypeDef HAL_Init(void);
+HAL_StatusTypeDef HAL_DeInit(void);
+void HAL_MspInit(void);
+void HAL_MspDeInit(void);
+HAL_StatusTypeDef HAL_InitTick (uint32_t TickPriority);
+/**
+  * @}
+  */
+
+/** @addtogroup HAL_Exported_Functions_Group2
+  * @{
+  */
+/* Peripheral Control functions  ************************************************/
+void HAL_IncTick(void);
+void HAL_Delay(uint32_t Delay);
+uint32_t HAL_GetTick(void);
+uint32_t HAL_GetTickPrio(void);
+HAL_StatusTypeDef HAL_SetTickFreq(HAL_TickFreqTypeDef Freq);
+HAL_TickFreqTypeDef HAL_GetTickFreq(void);
+void HAL_SuspendTick(void);
+void HAL_ResumeTick(void);
+uint32_t HAL_GetHalVersion(void);
+uint32_t HAL_GetREVID(void);
+uint32_t HAL_GetDEVID(void);
+void HAL_DBGMCU_EnableDBGSleepMode(void);
+void HAL_DBGMCU_DisableDBGSleepMode(void);
+void HAL_DBGMCU_EnableDBGStopMode(void);
+void HAL_DBGMCU_DisableDBGStopMode(void);
+void HAL_DBGMCU_EnableDBGStandbyMode(void);
+void HAL_DBGMCU_DisableDBGStandbyMode(void);
+void HAL_EnableCompensationCell(void);
+void HAL_DisableCompensationCell(void);
+uint32_t HAL_GetUIDw0(void);
+uint32_t HAL_GetUIDw1(void);
+uint32_t HAL_GetUIDw2(void);
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) ||\
+    defined(STM32F469xx) || defined(STM32F479xx)
+void HAL_EnableMemorySwappingBank(void);
+void HAL_DisableMemorySwappingBank(void);
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */ 
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup HAL_Private_Variables HAL Private Variables
+  * @{
+  */
+/**
+  * @}
+  */
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup HAL_Private_Constants HAL Private Constants
+  * @{
+  */
+/**
+  * @}
+  */
+/* Private macros ------------------------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */ 
+  
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

libs/STM32_HAL/include/stm32f4xx/stm32f4xx_hal_can.h

@@ -0,0 +1,848 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_can.h
+  * @author  MCD Application Team
+  * @brief   Header file of CAN HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32F4xx_HAL_CAN_H
+#define STM32F4xx_HAL_CAN_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+#if defined (CAN1)
+/** @addtogroup CAN
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup CAN_Exported_Types CAN Exported Types
+  * @{
+  */
+/**
+  * @brief  HAL State structures definition
+  */
+typedef enum
+{
+  HAL_CAN_STATE_RESET             = 0x00U,  /*!< CAN not yet initialized or disabled */
+  HAL_CAN_STATE_READY             = 0x01U,  /*!< CAN initialized and ready for use   */
+  HAL_CAN_STATE_LISTENING         = 0x02U,  /*!< CAN receive process is ongoing      */
+  HAL_CAN_STATE_SLEEP_PENDING     = 0x03U,  /*!< CAN sleep request is pending        */
+  HAL_CAN_STATE_SLEEP_ACTIVE      = 0x04U,  /*!< CAN sleep mode is active            */
+  HAL_CAN_STATE_ERROR             = 0x05U   /*!< CAN error state                     */
+
+} HAL_CAN_StateTypeDef;
+
+/**
+  * @brief  CAN init structure definition
+  */
+typedef struct
+{
+  uint32_t Prescaler;                  /*!< Specifies the length of a time quantum.
+                                            This parameter must be a number between Min_Data = 1 and Max_Data = 1024. */
+
+  uint32_t Mode;                       /*!< Specifies the CAN operating mode.
+                                            This parameter can be a value of @ref CAN_operating_mode */
+
+  uint32_t SyncJumpWidth;              /*!< Specifies the maximum number of time quanta the CAN hardware
+                                            is allowed to lengthen or shorten a bit to perform resynchronization.
+                                            This parameter can be a value of @ref CAN_synchronisation_jump_width */
+
+  uint32_t TimeSeg1;                   /*!< Specifies the number of time quanta in Bit Segment 1.
+                                            This parameter can be a value of @ref CAN_time_quantum_in_bit_segment_1 */
+
+  uint32_t TimeSeg2;                   /*!< Specifies the number of time quanta in Bit Segment 2.
+                                            This parameter can be a value of @ref CAN_time_quantum_in_bit_segment_2 */
+
+  FunctionalState TimeTriggeredMode;   /*!< Enable or disable the time triggered communication mode.
+                                            This parameter can be set to ENABLE or DISABLE. */
+
+  FunctionalState AutoBusOff;          /*!< Enable or disable the automatic bus-off management.
+                                            This parameter can be set to ENABLE or DISABLE. */
+
+  FunctionalState AutoWakeUp;          /*!< Enable or disable the automatic wake-up mode.
+                                            This parameter can be set to ENABLE or DISABLE. */
+
+  FunctionalState AutoRetransmission;  /*!< Enable or disable the non-automatic retransmission mode.
+                                            This parameter can be set to ENABLE or DISABLE. */
+
+  FunctionalState ReceiveFifoLocked;   /*!< Enable or disable the Receive FIFO Locked mode.
+                                            This parameter can be set to ENABLE or DISABLE. */
+
+  FunctionalState TransmitFifoPriority;/*!< Enable or disable the transmit FIFO priority.
+                                            This parameter can be set to ENABLE or DISABLE. */
+
+} CAN_InitTypeDef;
+
+/**
+  * @brief  CAN filter configuration structure definition
+  */
+typedef struct
+{
+  uint32_t FilterIdHigh;          /*!< Specifies the filter identification number (MSBs for a 32-bit
+                                       configuration, first one for a 16-bit configuration).
+                                       This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */
+
+  uint32_t FilterIdLow;           /*!< Specifies the filter identification number (LSBs for a 32-bit
+                                       configuration, second one for a 16-bit configuration).
+                                       This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */
+
+  uint32_t FilterMaskIdHigh;      /*!< Specifies the filter mask number or identification number,
+                                       according to the mode (MSBs for a 32-bit configuration,
+                                       first one for a 16-bit configuration).
+                                       This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */
+
+  uint32_t FilterMaskIdLow;       /*!< Specifies the filter mask number or identification number,
+                                       according to the mode (LSBs for a 32-bit configuration,
+                                       second one for a 16-bit configuration).
+                                       This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */
+
+  uint32_t FilterFIFOAssignment;  /*!< Specifies the FIFO (0 or 1U) which will be assigned to the filter.
+                                       This parameter can be a value of @ref CAN_filter_FIFO */
+
+  uint32_t FilterBank;            /*!< Specifies the filter bank which will be initialized.
+                                       For single CAN instance(14 dedicated filter banks),
+                                       this parameter must be a number between Min_Data = 0 and Max_Data = 13.
+                                       For dual CAN instances(28 filter banks shared),
+                                       this parameter must be a number between Min_Data = 0 and Max_Data = 27. */
+
+  uint32_t FilterMode;            /*!< Specifies the filter mode to be initialized.
+                                       This parameter can be a value of @ref CAN_filter_mode */
+
+  uint32_t FilterScale;           /*!< Specifies the filter scale.
+                                       This parameter can be a value of @ref CAN_filter_scale */
+
+  uint32_t FilterActivation;      /*!< Enable or disable the filter.
+                                       This parameter can be a value of @ref CAN_filter_activation */
+
+  uint32_t SlaveStartFilterBank;  /*!< Select the start filter bank for the slave CAN instance.
+                                       For single CAN instances, this parameter is meaningless.
+                                       For dual CAN instances, all filter banks with lower index are assigned to master
+                                       CAN instance, whereas all filter banks with greater index are assigned to slave
+                                       CAN instance.
+                                       This parameter must be a number between Min_Data = 0 and Max_Data = 27. */
+
+} CAN_FilterTypeDef;
+
+/**
+  * @brief  CAN Tx message header structure definition
+  */
+typedef struct
+{
+  uint32_t StdId;    /*!< Specifies the standard identifier.
+                          This parameter must be a number between Min_Data = 0 and Max_Data = 0x7FF. */
+
+  uint32_t ExtId;    /*!< Specifies the extended identifier.
+                          This parameter must be a number between Min_Data = 0 and Max_Data = 0x1FFFFFFF. */
+
+  uint32_t IDE;      /*!< Specifies the type of identifier for the message that will be transmitted.
+                          This parameter can be a value of @ref CAN_identifier_type */
+
+  uint32_t RTR;      /*!< Specifies the type of frame for the message that will be transmitted.
+                          This parameter can be a value of @ref CAN_remote_transmission_request */
+
+  uint32_t DLC;      /*!< Specifies the length of the frame that will be transmitted.
+                          This parameter must be a number between Min_Data = 0 and Max_Data = 8. */
+
+  FunctionalState TransmitGlobalTime; /*!< Specifies whether the timestamp counter value captured on start
+                          of frame transmission, is sent in DATA6 and DATA7 replacing pData[6] and pData[7].
+                          @note: Time Triggered Communication Mode must be enabled.
+                          @note: DLC must be programmed as 8 bytes, in order these 2 bytes are sent.
+                          This parameter can be set to ENABLE or DISABLE. */
+
+} CAN_TxHeaderTypeDef;
+
+/**
+  * @brief  CAN Rx message header structure definition
+  */
+typedef struct
+{
+  uint32_t StdId;    /*!< Specifies the standard identifier.
+                          This parameter must be a number between Min_Data = 0 and Max_Data = 0x7FF. */
+
+  uint32_t ExtId;    /*!< Specifies the extended identifier.
+                          This parameter must be a number between Min_Data = 0 and Max_Data = 0x1FFFFFFF. */
+
+  uint32_t IDE;      /*!< Specifies the type of identifier for the message that will be transmitted.
+                          This parameter can be a value of @ref CAN_identifier_type */
+
+  uint32_t RTR;      /*!< Specifies the type of frame for the message that will be transmitted.
+                          This parameter can be a value of @ref CAN_remote_transmission_request */
+
+  uint32_t DLC;      /*!< Specifies the length of the frame that will be transmitted.
+                          This parameter must be a number between Min_Data = 0 and Max_Data = 8. */
+
+  uint32_t Timestamp; /*!< Specifies the timestamp counter value captured on start of frame reception.
+                          @note: Time Triggered Communication Mode must be enabled.
+                          This parameter must be a number between Min_Data = 0 and Max_Data = 0xFFFF. */
+
+  uint32_t FilterMatchIndex; /*!< Specifies the index of matching acceptance filter element.
+                          This parameter must be a number between Min_Data = 0 and Max_Data = 0xFF. */
+
+} CAN_RxHeaderTypeDef;
+
+/**
+  * @brief  CAN handle Structure definition
+  */
+typedef struct __CAN_HandleTypeDef
+{
+  CAN_TypeDef                 *Instance;                 /*!< Register base address */
+
+  CAN_InitTypeDef             Init;                      /*!< CAN required parameters */
+
+  __IO HAL_CAN_StateTypeDef   State;                     /*!< CAN communication state */
+
+  __IO uint32_t               ErrorCode;                 /*!< CAN Error code.
+                                                              This parameter can be a value of @ref CAN_Error_Code */
+
+#if USE_HAL_CAN_REGISTER_CALLBACKS == 1
+  void (* TxMailbox0CompleteCallback)(struct __CAN_HandleTypeDef *hcan);/*!< CAN Tx Mailbox 0 complete callback    */
+  void (* TxMailbox1CompleteCallback)(struct __CAN_HandleTypeDef *hcan);/*!< CAN Tx Mailbox 1 complete callback    */
+  void (* TxMailbox2CompleteCallback)(struct __CAN_HandleTypeDef *hcan);/*!< CAN Tx Mailbox 2 complete callback    */
+  void (* TxMailbox0AbortCallback)(struct __CAN_HandleTypeDef *hcan);   /*!< CAN Tx Mailbox 0 abort callback       */
+  void (* TxMailbox1AbortCallback)(struct __CAN_HandleTypeDef *hcan);   /*!< CAN Tx Mailbox 1 abort callback       */
+  void (* TxMailbox2AbortCallback)(struct __CAN_HandleTypeDef *hcan);   /*!< CAN Tx Mailbox 2 abort callback       */
+  void (* RxFifo0MsgPendingCallback)(struct __CAN_HandleTypeDef *hcan); /*!< CAN Rx FIFO 0 msg pending callback    */
+  void (* RxFifo0FullCallback)(struct __CAN_HandleTypeDef *hcan);       /*!< CAN Rx FIFO 0 full callback           */
+  void (* RxFifo1MsgPendingCallback)(struct __CAN_HandleTypeDef *hcan); /*!< CAN Rx FIFO 1 msg pending callback    */
+  void (* RxFifo1FullCallback)(struct __CAN_HandleTypeDef *hcan);       /*!< CAN Rx FIFO 1 full callback           */
+  void (* SleepCallback)(struct __CAN_HandleTypeDef *hcan);             /*!< CAN Sleep callback                    */
+  void (* WakeUpFromRxMsgCallback)(struct __CAN_HandleTypeDef *hcan);   /*!< CAN Wake Up from Rx msg callback      */
+  void (* ErrorCallback)(struct __CAN_HandleTypeDef *hcan);             /*!< CAN Error callback                    */
+
+  void (* MspInitCallback)(struct __CAN_HandleTypeDef *hcan);           /*!< CAN Msp Init callback                 */
+  void (* MspDeInitCallback)(struct __CAN_HandleTypeDef *hcan);         /*!< CAN Msp DeInit callback               */
+
+#endif /* (USE_HAL_CAN_REGISTER_CALLBACKS) */
+} CAN_HandleTypeDef;
+
+#if USE_HAL_CAN_REGISTER_CALLBACKS == 1
+/**
+  * @brief  HAL CAN common Callback ID enumeration definition
+  */
+typedef enum
+{
+  HAL_CAN_TX_MAILBOX0_COMPLETE_CB_ID       = 0x00U,    /*!< CAN Tx Mailbox 0 complete callback ID         */
+  HAL_CAN_TX_MAILBOX1_COMPLETE_CB_ID       = 0x01U,    /*!< CAN Tx Mailbox 1 complete callback ID         */
+  HAL_CAN_TX_MAILBOX2_COMPLETE_CB_ID       = 0x02U,    /*!< CAN Tx Mailbox 2 complete callback ID         */
+  HAL_CAN_TX_MAILBOX0_ABORT_CB_ID          = 0x03U,    /*!< CAN Tx Mailbox 0 abort callback ID            */
+  HAL_CAN_TX_MAILBOX1_ABORT_CB_ID          = 0x04U,    /*!< CAN Tx Mailbox 1 abort callback ID            */
+  HAL_CAN_TX_MAILBOX2_ABORT_CB_ID          = 0x05U,    /*!< CAN Tx Mailbox 2 abort callback ID            */
+  HAL_CAN_RX_FIFO0_MSG_PENDING_CB_ID       = 0x06U,    /*!< CAN Rx FIFO 0 message pending callback ID     */
+  HAL_CAN_RX_FIFO0_FULL_CB_ID              = 0x07U,    /*!< CAN Rx FIFO 0 full callback ID                */
+  HAL_CAN_RX_FIFO1_MSG_PENDING_CB_ID       = 0x08U,    /*!< CAN Rx FIFO 1 message pending callback ID     */
+  HAL_CAN_RX_FIFO1_FULL_CB_ID              = 0x09U,    /*!< CAN Rx FIFO 1 full callback ID                */
+  HAL_CAN_SLEEP_CB_ID                      = 0x0AU,    /*!< CAN Sleep callback ID                         */
+  HAL_CAN_WAKEUP_FROM_RX_MSG_CB_ID         = 0x0BU,    /*!< CAN Wake Up from Rx msg callback ID          */
+  HAL_CAN_ERROR_CB_ID                      = 0x0CU,    /*!< CAN Error callback ID                         */
+
+  HAL_CAN_MSPINIT_CB_ID                    = 0x0DU,    /*!< CAN MspInit callback ID                       */
+  HAL_CAN_MSPDEINIT_CB_ID                  = 0x0EU,    /*!< CAN MspDeInit callback ID                     */
+
+} HAL_CAN_CallbackIDTypeDef;
+
+/**
+  * @brief  HAL CAN Callback pointer definition
+  */
+typedef  void (*pCAN_CallbackTypeDef)(CAN_HandleTypeDef *hcan); /*!< pointer to a CAN callback function   */
+
+#endif /* USE_HAL_CAN_REGISTER_CALLBACKS */
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup CAN_Exported_Constants CAN Exported Constants
+  * @{
+  */
+
+/** @defgroup CAN_Error_Code CAN Error Code
+  * @{
+  */
+#define HAL_CAN_ERROR_NONE            (0x00000000U)  /*!< No error                                             */
+#define HAL_CAN_ERROR_EWG             (0x00000001U)  /*!< Protocol Error Warning                               */
+#define HAL_CAN_ERROR_EPV             (0x00000002U)  /*!< Error Passive                                        */
+#define HAL_CAN_ERROR_BOF             (0x00000004U)  /*!< Bus-off error                                        */
+#define HAL_CAN_ERROR_STF             (0x00000008U)  /*!< Stuff error                                          */
+#define HAL_CAN_ERROR_FOR             (0x00000010U)  /*!< Form error                                           */
+#define HAL_CAN_ERROR_ACK             (0x00000020U)  /*!< Acknowledgment error                                 */
+#define HAL_CAN_ERROR_BR              (0x00000040U)  /*!< Bit recessive error                                  */
+#define HAL_CAN_ERROR_BD              (0x00000080U)  /*!< Bit dominant error                                   */
+#define HAL_CAN_ERROR_CRC             (0x00000100U)  /*!< CRC error                                            */
+#define HAL_CAN_ERROR_RX_FOV0         (0x00000200U)  /*!< Rx FIFO0 overrun error                               */
+#define HAL_CAN_ERROR_RX_FOV1         (0x00000400U)  /*!< Rx FIFO1 overrun error                               */
+#define HAL_CAN_ERROR_TX_ALST0        (0x00000800U)  /*!< TxMailbox 0 transmit failure due to arbitration lost */
+#define HAL_CAN_ERROR_TX_TERR0        (0x00001000U)  /*!< TxMailbox 0 transmit failure due to transmit error    */
+#define HAL_CAN_ERROR_TX_ALST1        (0x00002000U)  /*!< TxMailbox 1 transmit failure due to arbitration lost */
+#define HAL_CAN_ERROR_TX_TERR1        (0x00004000U)  /*!< TxMailbox 1 transmit failure due to transmit error    */
+#define HAL_CAN_ERROR_TX_ALST2        (0x00008000U)  /*!< TxMailbox 2 transmit failure due to arbitration lost */
+#define HAL_CAN_ERROR_TX_TERR2        (0x00010000U)  /*!< TxMailbox 2 transmit failure due to transmit error    */
+#define HAL_CAN_ERROR_TIMEOUT         (0x00020000U)  /*!< Timeout error                                        */
+#define HAL_CAN_ERROR_NOT_INITIALIZED (0x00040000U)  /*!< Peripheral not initialized                           */
+#define HAL_CAN_ERROR_NOT_READY       (0x00080000U)  /*!< Peripheral not ready                                 */
+#define HAL_CAN_ERROR_NOT_STARTED     (0x00100000U)  /*!< Peripheral not started                               */
+#define HAL_CAN_ERROR_PARAM           (0x00200000U)  /*!< Parameter error                                      */
+
+#if USE_HAL_CAN_REGISTER_CALLBACKS == 1
+#define HAL_CAN_ERROR_INVALID_CALLBACK (0x00400000U) /*!< Invalid Callback error                               */
+#endif /* USE_HAL_CAN_REGISTER_CALLBACKS */
+#define HAL_CAN_ERROR_INTERNAL        (0x00800000U)  /*!< Internal error                                       */
+
+/**
+  * @}
+  */
+
+/** @defgroup CAN_InitStatus CAN InitStatus
+  * @{
+  */
+#define CAN_INITSTATUS_FAILED       (0x00000000U)  /*!< CAN initialization failed */
+#define CAN_INITSTATUS_SUCCESS      (0x00000001U)  /*!< CAN initialization OK     */
+/**
+  * @}
+  */
+
+/** @defgroup CAN_operating_mode CAN Operating Mode
+  * @{
+  */
+#define CAN_MODE_NORMAL             (0x00000000U)                              /*!< Normal mode   */
+#define CAN_MODE_LOOPBACK           ((uint32_t)CAN_BTR_LBKM)                   /*!< Loopback mode */
+#define CAN_MODE_SILENT             ((uint32_t)CAN_BTR_SILM)                   /*!< Silent mode   */
+#define CAN_MODE_SILENT_LOOPBACK    ((uint32_t)(CAN_BTR_LBKM | CAN_BTR_SILM))  /*!< Loopback combined with silent mode */
+/**
+  * @}
+  */
+
+
+/** @defgroup CAN_synchronisation_jump_width CAN Synchronization Jump Width
+  * @{
+  */
+#define CAN_SJW_1TQ                 (0x00000000U)              /*!< 1 time quantum */
+#define CAN_SJW_2TQ                 ((uint32_t)CAN_BTR_SJW_0)  /*!< 2 time quantum */
+#define CAN_SJW_3TQ                 ((uint32_t)CAN_BTR_SJW_1)  /*!< 3 time quantum */
+#define CAN_SJW_4TQ                 ((uint32_t)CAN_BTR_SJW)    /*!< 4 time quantum */
+/**
+  * @}
+  */
+
+/** @defgroup CAN_time_quantum_in_bit_segment_1 CAN Time Quantum in Bit Segment 1
+  * @{
+  */
+#define CAN_BS1_1TQ                 (0x00000000U)                                                /*!< 1 time quantum  */
+#define CAN_BS1_2TQ                 ((uint32_t)CAN_BTR_TS1_0)                                    /*!< 2 time quantum  */
+#define CAN_BS1_3TQ                 ((uint32_t)CAN_BTR_TS1_1)                                    /*!< 3 time quantum  */
+#define CAN_BS1_4TQ                 ((uint32_t)(CAN_BTR_TS1_1 | CAN_BTR_TS1_0))                  /*!< 4 time quantum  */
+#define CAN_BS1_5TQ                 ((uint32_t)CAN_BTR_TS1_2)                                    /*!< 5 time quantum  */
+#define CAN_BS1_6TQ                 ((uint32_t)(CAN_BTR_TS1_2 | CAN_BTR_TS1_0))                  /*!< 6 time quantum  */
+#define CAN_BS1_7TQ                 ((uint32_t)(CAN_BTR_TS1_2 | CAN_BTR_TS1_1))                  /*!< 7 time quantum  */
+#define CAN_BS1_8TQ                 ((uint32_t)(CAN_BTR_TS1_2 | CAN_BTR_TS1_1 | CAN_BTR_TS1_0))  /*!< 8 time quantum  */
+#define CAN_BS1_9TQ                 ((uint32_t)CAN_BTR_TS1_3)                                    /*!< 9 time quantum  */
+#define CAN_BS1_10TQ                ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_0))                  /*!< 10 time quantum */
+#define CAN_BS1_11TQ                ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_1))                  /*!< 11 time quantum */
+#define CAN_BS1_12TQ                ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_1 | CAN_BTR_TS1_0))  /*!< 12 time quantum */
+#define CAN_BS1_13TQ                ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_2))                  /*!< 13 time quantum */
+#define CAN_BS1_14TQ                ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_2 | CAN_BTR_TS1_0))  /*!< 14 time quantum */
+#define CAN_BS1_15TQ                ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_2 | CAN_BTR_TS1_1))  /*!< 15 time quantum */
+#define CAN_BS1_16TQ                ((uint32_t)CAN_BTR_TS1) /*!< 16 time quantum */
+/**
+  * @}
+  */
+
+/** @defgroup CAN_time_quantum_in_bit_segment_2 CAN Time Quantum in Bit Segment 2
+  * @{
+  */
+#define CAN_BS2_1TQ                 (0x00000000U)                                /*!< 1 time quantum */
+#define CAN_BS2_2TQ                 ((uint32_t)CAN_BTR_TS2_0)                    /*!< 2 time quantum */
+#define CAN_BS2_3TQ                 ((uint32_t)CAN_BTR_TS2_1)                    /*!< 3 time quantum */
+#define CAN_BS2_4TQ                 ((uint32_t)(CAN_BTR_TS2_1 | CAN_BTR_TS2_0))  /*!< 4 time quantum */
+#define CAN_BS2_5TQ                 ((uint32_t)CAN_BTR_TS2_2)                    /*!< 5 time quantum */
+#define CAN_BS2_6TQ                 ((uint32_t)(CAN_BTR_TS2_2 | CAN_BTR_TS2_0))  /*!< 6 time quantum */
+#define CAN_BS2_7TQ                 ((uint32_t)(CAN_BTR_TS2_2 | CAN_BTR_TS2_1))  /*!< 7 time quantum */
+#define CAN_BS2_8TQ                 ((uint32_t)CAN_BTR_TS2)                      /*!< 8 time quantum */
+/**
+  * @}
+  */
+
+/** @defgroup CAN_filter_mode CAN Filter Mode
+  * @{
+  */
+#define CAN_FILTERMODE_IDMASK       (0x00000000U)  /*!< Identifier mask mode */
+#define CAN_FILTERMODE_IDLIST       (0x00000001U)  /*!< Identifier list mode */
+/**
+  * @}
+  */
+
+/** @defgroup CAN_filter_scale CAN Filter Scale
+  * @{
+  */
+#define CAN_FILTERSCALE_16BIT       (0x00000000U)  /*!< Two 16-bit filters */
+#define CAN_FILTERSCALE_32BIT       (0x00000001U)  /*!< One 32-bit filter  */
+/**
+  * @}
+  */
+
+/** @defgroup CAN_filter_activation CAN Filter Activation
+  * @{
+  */
+#define CAN_FILTER_DISABLE          (0x00000000U)  /*!< Disable filter */
+#define CAN_FILTER_ENABLE           (0x00000001U)  /*!< Enable filter  */
+/**
+  * @}
+  */
+
+/** @defgroup CAN_filter_FIFO CAN Filter FIFO
+  * @{
+  */
+#define CAN_FILTER_FIFO0            (0x00000000U)  /*!< Filter FIFO 0 assignment for filter x */
+#define CAN_FILTER_FIFO1            (0x00000001U)  /*!< Filter FIFO 1 assignment for filter x */
+/**
+  * @}
+  */
+
+/** @defgroup CAN_identifier_type CAN Identifier Type
+  * @{
+  */
+#define CAN_ID_STD                  (0x00000000U)  /*!< Standard Id */
+#define CAN_ID_EXT                  (0x00000004U)  /*!< Extended Id */
+/**
+  * @}
+  */
+
+/** @defgroup CAN_remote_transmission_request CAN Remote Transmission Request
+  * @{
+  */
+#define CAN_RTR_DATA                (0x00000000U)  /*!< Data frame   */
+#define CAN_RTR_REMOTE              (0x00000002U)  /*!< Remote frame */
+/**
+  * @}
+  */
+
+/** @defgroup CAN_receive_FIFO_number CAN Receive FIFO Number
+  * @{
+  */
+#define CAN_RX_FIFO0                (0x00000000U)  /*!< CAN receive FIFO 0 */
+#define CAN_RX_FIFO1                (0x00000001U)  /*!< CAN receive FIFO 1 */
+/**
+  * @}
+  */
+
+/** @defgroup CAN_Tx_Mailboxes CAN Tx Mailboxes
+  * @{
+  */
+#define CAN_TX_MAILBOX0             (0x00000001U)  /*!< Tx Mailbox 0  */
+#define CAN_TX_MAILBOX1             (0x00000002U)  /*!< Tx Mailbox 1  */
+#define CAN_TX_MAILBOX2             (0x00000004U)  /*!< Tx Mailbox 2  */
+/**
+  * @}
+  */
+
+/** @defgroup CAN_flags CAN Flags
+  * @{
+  */
+/* Transmit Flags */
+#define CAN_FLAG_RQCP0              (0x00000500U)  /*!< Request complete MailBox 0 flag   */
+#define CAN_FLAG_TXOK0              (0x00000501U)  /*!< Transmission OK MailBox 0 flag    */
+#define CAN_FLAG_ALST0              (0x00000502U)  /*!< Arbitration Lost MailBox 0 flag   */
+#define CAN_FLAG_TERR0              (0x00000503U)  /*!< Transmission error MailBox 0 flag */
+#define CAN_FLAG_RQCP1              (0x00000508U)  /*!< Request complete MailBox1 flag    */
+#define CAN_FLAG_TXOK1              (0x00000509U)  /*!< Transmission OK MailBox 1 flag    */
+#define CAN_FLAG_ALST1              (0x0000050AU)  /*!< Arbitration Lost MailBox 1 flag   */
+#define CAN_FLAG_TERR1              (0x0000050BU)  /*!< Transmission error MailBox 1 flag */
+#define CAN_FLAG_RQCP2              (0x00000510U)  /*!< Request complete MailBox2 flag    */
+#define CAN_FLAG_TXOK2              (0x00000511U)  /*!< Transmission OK MailBox 2 flag    */
+#define CAN_FLAG_ALST2              (0x00000512U)  /*!< Arbitration Lost MailBox 2 flag   */
+#define CAN_FLAG_TERR2              (0x00000513U)  /*!< Transmission error MailBox 2 flag */
+#define CAN_FLAG_TME0               (0x0000051AU)  /*!< Transmit mailbox 0 empty flag     */
+#define CAN_FLAG_TME1               (0x0000051BU)  /*!< Transmit mailbox 1 empty flag     */
+#define CAN_FLAG_TME2               (0x0000051CU)  /*!< Transmit mailbox 2 empty flag     */
+#define CAN_FLAG_LOW0               (0x0000051DU)  /*!< Lowest priority mailbox 0 flag    */
+#define CAN_FLAG_LOW1               (0x0000051EU)  /*!< Lowest priority mailbox 1 flag    */
+#define CAN_FLAG_LOW2               (0x0000051FU)  /*!< Lowest priority mailbox 2 flag    */
+
+/* Receive Flags */
+#define CAN_FLAG_FF0                (0x00000203U)  /*!< RX FIFO 0 Full flag               */
+#define CAN_FLAG_FOV0               (0x00000204U)  /*!< RX FIFO 0 Overrun flag            */
+#define CAN_FLAG_FF1                (0x00000403U)  /*!< RX FIFO 1 Full flag               */
+#define CAN_FLAG_FOV1               (0x00000404U)  /*!< RX FIFO 1 Overrun flag            */
+
+/* Operating Mode Flags */
+#define CAN_FLAG_INAK               (0x00000100U)  /*!< Initialization acknowledge flag   */
+#define CAN_FLAG_SLAK               (0x00000101U)  /*!< Sleep acknowledge flag            */
+#define CAN_FLAG_ERRI               (0x00000102U)  /*!< Error flag                        */
+#define CAN_FLAG_WKU                (0x00000103U)  /*!< Wake up interrupt flag            */
+#define CAN_FLAG_SLAKI              (0x00000104U)  /*!< Sleep acknowledge interrupt flag  */
+
+/* Error Flags */
+#define CAN_FLAG_EWG                (0x00000300U)  /*!< Error warning flag                */
+#define CAN_FLAG_EPV                (0x00000301U)  /*!< Error passive flag                */
+#define CAN_FLAG_BOF                (0x00000302U)  /*!< Bus-Off flag                      */
+/**
+  * @}
+  */
+
+
+/** @defgroup CAN_Interrupts CAN Interrupts
+  * @{
+  */
+/* Transmit Interrupt */
+#define CAN_IT_TX_MAILBOX_EMPTY     ((uint32_t)CAN_IER_TMEIE)   /*!< Transmit mailbox empty interrupt */
+
+/* Receive Interrupts */
+#define CAN_IT_RX_FIFO0_MSG_PENDING ((uint32_t)CAN_IER_FMPIE0)  /*!< FIFO 0 message pending interrupt */
+#define CAN_IT_RX_FIFO0_FULL        ((uint32_t)CAN_IER_FFIE0)   /*!< FIFO 0 full interrupt            */
+#define CAN_IT_RX_FIFO0_OVERRUN     ((uint32_t)CAN_IER_FOVIE0)  /*!< FIFO 0 overrun interrupt         */
+#define CAN_IT_RX_FIFO1_MSG_PENDING ((uint32_t)CAN_IER_FMPIE1)  /*!< FIFO 1 message pending interrupt */
+#define CAN_IT_RX_FIFO1_FULL        ((uint32_t)CAN_IER_FFIE1)   /*!< FIFO 1 full interrupt            */
+#define CAN_IT_RX_FIFO1_OVERRUN     ((uint32_t)CAN_IER_FOVIE1)  /*!< FIFO 1 overrun interrupt         */
+
+/* Operating Mode Interrupts */
+#define CAN_IT_WAKEUP               ((uint32_t)CAN_IER_WKUIE)   /*!< Wake-up interrupt                */
+#define CAN_IT_SLEEP_ACK            ((uint32_t)CAN_IER_SLKIE)   /*!< Sleep acknowledge interrupt      */
+
+/* Error Interrupts */
+#define CAN_IT_ERROR_WARNING        ((uint32_t)CAN_IER_EWGIE)   /*!< Error warning interrupt          */
+#define CAN_IT_ERROR_PASSIVE        ((uint32_t)CAN_IER_EPVIE)   /*!< Error passive interrupt          */
+#define CAN_IT_BUSOFF               ((uint32_t)CAN_IER_BOFIE)   /*!< Bus-off interrupt                */
+#define CAN_IT_LAST_ERROR_CODE      ((uint32_t)CAN_IER_LECIE)   /*!< Last error code interrupt        */
+#define CAN_IT_ERROR                ((uint32_t)CAN_IER_ERRIE)   /*!< Error Interrupt                  */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup CAN_Exported_Macros CAN Exported Macros
+  * @{
+  */
+
+/** @brief  Reset CAN handle state
+  * @param  __HANDLE__ CAN handle.
+  * @retval None
+  */
+#if USE_HAL_CAN_REGISTER_CALLBACKS == 1
+#define __HAL_CAN_RESET_HANDLE_STATE(__HANDLE__) do{                                              \
+                                                     (__HANDLE__)->State = HAL_CAN_STATE_RESET;   \
+                                                     (__HANDLE__)->MspInitCallback = NULL;        \
+                                                     (__HANDLE__)->MspDeInitCallback = NULL;      \
+                                                   } while(0)
+#else
+#define __HAL_CAN_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_CAN_STATE_RESET)
+#endif /*USE_HAL_CAN_REGISTER_CALLBACKS */
+
+/**
+  * @brief  Enable the specified CAN interrupts.
+  * @param  __HANDLE__ CAN handle.
+  * @param  __INTERRUPT__ CAN Interrupt sources to enable.
+  *           This parameter can be any combination of @arg CAN_Interrupts
+  * @retval None
+  */
+#define __HAL_CAN_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->IER) |= (__INTERRUPT__))
+
+/**
+  * @brief  Disable the specified CAN interrupts.
+  * @param  __HANDLE__ CAN handle.
+  * @param  __INTERRUPT__ CAN Interrupt sources to disable.
+  *           This parameter can be any combination of @arg CAN_Interrupts
+  * @retval None
+  */
+#define __HAL_CAN_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->IER) &= ~(__INTERRUPT__))
+
+/** @brief  Check if the specified CAN interrupt source is enabled or disabled.
+  * @param  __HANDLE__ specifies the CAN Handle.
+  * @param  __INTERRUPT__ specifies the CAN interrupt source to check.
+  *           This parameter can be a value of @arg CAN_Interrupts
+  * @retval The state of __IT__ (TRUE or FALSE).
+  */
+#define __HAL_CAN_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->IER) & (__INTERRUPT__))
+
+/** @brief  Check whether the specified CAN flag is set or not.
+  * @param  __HANDLE__ specifies the CAN Handle.
+  * @param  __FLAG__ specifies the flag to check.
+  *         This parameter can be one of @arg CAN_flags
+  * @retval The state of __FLAG__ (TRUE or FALSE).
+  */
+#define __HAL_CAN_GET_FLAG(__HANDLE__, __FLAG__) \
+  ((((__FLAG__) >> 8U) == 5U)? ((((__HANDLE__)->Instance->TSR) & (1U << ((__FLAG__) & CAN_FLAG_MASK))) == (1U << ((__FLAG__) & CAN_FLAG_MASK))): \
+   (((__FLAG__) >> 8U) == 2U)? ((((__HANDLE__)->Instance->RF0R) & (1U << ((__FLAG__) & CAN_FLAG_MASK))) == (1U << ((__FLAG__) & CAN_FLAG_MASK))): \
+   (((__FLAG__) >> 8U) == 4U)? ((((__HANDLE__)->Instance->RF1R) & (1U << ((__FLAG__) & CAN_FLAG_MASK))) == (1U << ((__FLAG__) & CAN_FLAG_MASK))): \
+   (((__FLAG__) >> 8U) == 1U)? ((((__HANDLE__)->Instance->MSR) & (1U << ((__FLAG__) & CAN_FLAG_MASK))) == (1U << ((__FLAG__) & CAN_FLAG_MASK))): \
+   (((__FLAG__) >> 8U) == 3U)? ((((__HANDLE__)->Instance->ESR) & (1U << ((__FLAG__) & CAN_FLAG_MASK))) == (1U << ((__FLAG__) & CAN_FLAG_MASK))): 0U)
+
+/** @brief  Clear the specified CAN pending flag.
+  * @param  __HANDLE__ specifies the CAN Handle.
+  * @param  __FLAG__ specifies the flag to check.
+  *         This parameter can be one of the following values:
+  *            @arg CAN_FLAG_RQCP0: Request complete MailBox 0 Flag
+  *            @arg CAN_FLAG_TXOK0: Transmission OK MailBox 0 Flag
+  *            @arg CAN_FLAG_ALST0: Arbitration Lost MailBox 0 Flag
+  *            @arg CAN_FLAG_TERR0: Transmission error MailBox 0 Flag
+  *            @arg CAN_FLAG_RQCP1: Request complete MailBox 1 Flag
+  *            @arg CAN_FLAG_TXOK1: Transmission OK MailBox 1 Flag
+  *            @arg CAN_FLAG_ALST1: Arbitration Lost MailBox 1 Flag
+  *            @arg CAN_FLAG_TERR1: Transmission error MailBox 1 Flag
+  *            @arg CAN_FLAG_RQCP2: Request complete MailBox 2 Flag
+  *            @arg CAN_FLAG_TXOK2: Transmission OK MailBox 2 Flag
+  *            @arg CAN_FLAG_ALST2: Arbitration Lost MailBox 2 Flag
+  *            @arg CAN_FLAG_TERR2: Transmission error MailBox 2 Flag
+  *            @arg CAN_FLAG_FF0:   RX FIFO 0 Full Flag
+  *            @arg CAN_FLAG_FOV0:  RX FIFO 0 Overrun Flag
+  *            @arg CAN_FLAG_FF1:   RX FIFO 1 Full Flag
+  *            @arg CAN_FLAG_FOV1:  RX FIFO 1 Overrun Flag
+  *            @arg CAN_FLAG_WKUI:  Wake up Interrupt Flag
+  *            @arg CAN_FLAG_SLAKI: Sleep acknowledge Interrupt Flag
+  * @retval None
+  */
+#define __HAL_CAN_CLEAR_FLAG(__HANDLE__, __FLAG__) \
+  ((((__FLAG__) >> 8U) == 5U)? (((__HANDLE__)->Instance->TSR) = (1U << ((__FLAG__) & CAN_FLAG_MASK))): \
+   (((__FLAG__) >> 8U) == 2U)? (((__HANDLE__)->Instance->RF0R) = (1U << ((__FLAG__) & CAN_FLAG_MASK))): \
+   (((__FLAG__) >> 8U) == 4U)? (((__HANDLE__)->Instance->RF1R) = (1U << ((__FLAG__) & CAN_FLAG_MASK))): \
+   (((__FLAG__) >> 8U) == 1U)? (((__HANDLE__)->Instance->MSR) = (1U << ((__FLAG__) & CAN_FLAG_MASK))): 0U)
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup CAN_Exported_Functions CAN Exported Functions
+  * @{
+  */
+
+/** @addtogroup CAN_Exported_Functions_Group1 Initialization and de-initialization functions
+ *  @brief    Initialization and Configuration functions
+ * @{
+ */
+
+/* Initialization and de-initialization functions *****************************/
+HAL_StatusTypeDef HAL_CAN_Init(CAN_HandleTypeDef *hcan);
+HAL_StatusTypeDef HAL_CAN_DeInit(CAN_HandleTypeDef *hcan);
+void HAL_CAN_MspInit(CAN_HandleTypeDef *hcan);
+void HAL_CAN_MspDeInit(CAN_HandleTypeDef *hcan);
+
+#if USE_HAL_CAN_REGISTER_CALLBACKS == 1
+/* Callbacks Register/UnRegister functions  ***********************************/
+HAL_StatusTypeDef HAL_CAN_RegisterCallback(CAN_HandleTypeDef *hcan, HAL_CAN_CallbackIDTypeDef CallbackID, void (* pCallback)(CAN_HandleTypeDef *_hcan));
+HAL_StatusTypeDef HAL_CAN_UnRegisterCallback(CAN_HandleTypeDef *hcan, HAL_CAN_CallbackIDTypeDef CallbackID);
+
+#endif /* (USE_HAL_CAN_REGISTER_CALLBACKS) */
+/**
+ * @}
+ */
+
+/** @addtogroup CAN_Exported_Functions_Group2 Configuration functions
+ *  @brief    Configuration functions
+ * @{
+ */
+
+/* Configuration functions ****************************************************/
+HAL_StatusTypeDef HAL_CAN_ConfigFilter(CAN_HandleTypeDef *hcan, CAN_FilterTypeDef *sFilterConfig);
+
+/**
+ * @}
+ */
+
+/** @addtogroup CAN_Exported_Functions_Group3 Control functions
+ *  @brief    Control functions
+ * @{
+ */
+
+/* Control functions **********************************************************/
+HAL_StatusTypeDef HAL_CAN_Start(CAN_HandleTypeDef *hcan);
+HAL_StatusTypeDef HAL_CAN_Stop(CAN_HandleTypeDef *hcan);
+HAL_StatusTypeDef HAL_CAN_RequestSleep(CAN_HandleTypeDef *hcan);
+HAL_StatusTypeDef HAL_CAN_WakeUp(CAN_HandleTypeDef *hcan);
+uint32_t HAL_CAN_IsSleepActive(CAN_HandleTypeDef *hcan);
+HAL_StatusTypeDef HAL_CAN_AddTxMessage(CAN_HandleTypeDef *hcan, CAN_TxHeaderTypeDef *pHeader, uint8_t aData[], uint32_t *pTxMailbox);
+HAL_StatusTypeDef HAL_CAN_AbortTxRequest(CAN_HandleTypeDef *hcan, uint32_t TxMailboxes);
+uint32_t HAL_CAN_GetTxMailboxesFreeLevel(CAN_HandleTypeDef *hcan);
+uint32_t HAL_CAN_IsTxMessagePending(CAN_HandleTypeDef *hcan, uint32_t TxMailboxes);
+uint32_t HAL_CAN_GetTxTimestamp(CAN_HandleTypeDef *hcan, uint32_t TxMailbox);
+HAL_StatusTypeDef HAL_CAN_GetRxMessage(CAN_HandleTypeDef *hcan, uint32_t RxFifo, CAN_RxHeaderTypeDef *pHeader, uint8_t aData[]);
+uint32_t HAL_CAN_GetRxFifoFillLevel(CAN_HandleTypeDef *hcan, uint32_t RxFifo);
+
+/**
+ * @}
+ */
+
+/** @addtogroup CAN_Exported_Functions_Group4 Interrupts management
+ *  @brief    Interrupts management
+ * @{
+ */
+/* Interrupts management ******************************************************/
+HAL_StatusTypeDef HAL_CAN_ActivateNotification(CAN_HandleTypeDef *hcan, uint32_t ActiveITs);
+HAL_StatusTypeDef HAL_CAN_DeactivateNotification(CAN_HandleTypeDef *hcan, uint32_t InactiveITs);
+void HAL_CAN_IRQHandler(CAN_HandleTypeDef *hcan);
+
+/**
+ * @}
+ */
+
+/** @addtogroup CAN_Exported_Functions_Group5 Callback functions
+ *  @brief    Callback functions
+ * @{
+ */
+/* Callbacks functions ********************************************************/
+
+void HAL_CAN_TxMailbox0CompleteCallback(CAN_HandleTypeDef *hcan);
+void HAL_CAN_TxMailbox1CompleteCallback(CAN_HandleTypeDef *hcan);
+void HAL_CAN_TxMailbox2CompleteCallback(CAN_HandleTypeDef *hcan);
+void HAL_CAN_TxMailbox0AbortCallback(CAN_HandleTypeDef *hcan);
+void HAL_CAN_TxMailbox1AbortCallback(CAN_HandleTypeDef *hcan);
+void HAL_CAN_TxMailbox2AbortCallback(CAN_HandleTypeDef *hcan);
+void HAL_CAN_RxFifo0MsgPendingCallback(CAN_HandleTypeDef *hcan);
+void HAL_CAN_RxFifo0FullCallback(CAN_HandleTypeDef *hcan);
+void HAL_CAN_RxFifo1MsgPendingCallback(CAN_HandleTypeDef *hcan);
+void HAL_CAN_RxFifo1FullCallback(CAN_HandleTypeDef *hcan);
+void HAL_CAN_SleepCallback(CAN_HandleTypeDef *hcan);
+void HAL_CAN_WakeUpFromRxMsgCallback(CAN_HandleTypeDef *hcan);
+void HAL_CAN_ErrorCallback(CAN_HandleTypeDef *hcan);
+
+/**
+ * @}
+ */
+
+/** @addtogroup CAN_Exported_Functions_Group6 Peripheral State and Error functions
+ *  @brief   CAN Peripheral State functions
+ * @{
+ */
+/* Peripheral State and Error functions ***************************************/
+HAL_CAN_StateTypeDef HAL_CAN_GetState(CAN_HandleTypeDef *hcan);
+uint32_t HAL_CAN_GetError(CAN_HandleTypeDef *hcan);
+HAL_StatusTypeDef HAL_CAN_ResetError(CAN_HandleTypeDef *hcan);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private types -------------------------------------------------------------*/
+/** @defgroup CAN_Private_Types CAN Private Types
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup CAN_Private_Variables CAN Private Variables
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup CAN_Private_Constants CAN Private Constants
+  * @{
+  */
+#define CAN_FLAG_MASK  (0x000000FFU)
+/**
+  * @}
+  */
+
+/* Private Macros -----------------------------------------------------------*/
+/** @defgroup CAN_Private_Macros CAN Private Macros
+  * @{
+  */
+
+#define IS_CAN_MODE(MODE) (((MODE) == CAN_MODE_NORMAL) || \
+                           ((MODE) == CAN_MODE_LOOPBACK)|| \
+                           ((MODE) == CAN_MODE_SILENT) || \
+                           ((MODE) == CAN_MODE_SILENT_LOOPBACK))
+#define IS_CAN_SJW(SJW) (((SJW) == CAN_SJW_1TQ) || ((SJW) == CAN_SJW_2TQ) || \
+                         ((SJW) == CAN_SJW_3TQ) || ((SJW) == CAN_SJW_4TQ))
+#define IS_CAN_BS1(BS1) (((BS1) == CAN_BS1_1TQ) || ((BS1) == CAN_BS1_2TQ) || \
+                         ((BS1) == CAN_BS1_3TQ) || ((BS1) == CAN_BS1_4TQ) || \
+                         ((BS1) == CAN_BS1_5TQ) || ((BS1) == CAN_BS1_6TQ) || \
+                         ((BS1) == CAN_BS1_7TQ) || ((BS1) == CAN_BS1_8TQ) || \
+                         ((BS1) == CAN_BS1_9TQ) || ((BS1) == CAN_BS1_10TQ)|| \
+                         ((BS1) == CAN_BS1_11TQ)|| ((BS1) == CAN_BS1_12TQ)|| \
+                         ((BS1) == CAN_BS1_13TQ)|| ((BS1) == CAN_BS1_14TQ)|| \
+                         ((BS1) == CAN_BS1_15TQ)|| ((BS1) == CAN_BS1_16TQ))
+#define IS_CAN_BS2(BS2) (((BS2) == CAN_BS2_1TQ) || ((BS2) == CAN_BS2_2TQ) || \
+                         ((BS2) == CAN_BS2_3TQ) || ((BS2) == CAN_BS2_4TQ) || \
+                         ((BS2) == CAN_BS2_5TQ) || ((BS2) == CAN_BS2_6TQ) || \
+                         ((BS2) == CAN_BS2_7TQ) || ((BS2) == CAN_BS2_8TQ))
+#define IS_CAN_PRESCALER(PRESCALER) (((PRESCALER) >= 1U) && ((PRESCALER) <= 1024U))
+#define IS_CAN_FILTER_ID_HALFWORD(HALFWORD) ((HALFWORD) <= 0xFFFFU)
+#define IS_CAN_FILTER_BANK_DUAL(BANK) ((BANK) <= 27U)
+#define IS_CAN_FILTER_BANK_SINGLE(BANK) ((BANK) <= 13U)
+#define IS_CAN_FILTER_MODE(MODE) (((MODE) == CAN_FILTERMODE_IDMASK) || \
+                                  ((MODE) == CAN_FILTERMODE_IDLIST))
+#define IS_CAN_FILTER_SCALE(SCALE) (((SCALE) == CAN_FILTERSCALE_16BIT) || \
+                                    ((SCALE) == CAN_FILTERSCALE_32BIT))
+#define IS_CAN_FILTER_ACTIVATION(ACTIVATION) (((ACTIVATION) == CAN_FILTER_DISABLE) || \
+                                              ((ACTIVATION) == CAN_FILTER_ENABLE))
+#define IS_CAN_FILTER_FIFO(FIFO) (((FIFO) == CAN_FILTER_FIFO0) || \
+                                  ((FIFO) == CAN_FILTER_FIFO1))
+#define IS_CAN_TX_MAILBOX(TRANSMITMAILBOX) (((TRANSMITMAILBOX) == CAN_TX_MAILBOX0 ) || \
+                                            ((TRANSMITMAILBOX) == CAN_TX_MAILBOX1 ) || \
+                                            ((TRANSMITMAILBOX) == CAN_TX_MAILBOX2 ))
+#define IS_CAN_TX_MAILBOX_LIST(TRANSMITMAILBOX) ((TRANSMITMAILBOX) <= (CAN_TX_MAILBOX0 | CAN_TX_MAILBOX1 | CAN_TX_MAILBOX2))
+#define IS_CAN_STDID(STDID)   ((STDID) <= 0x7FFU)
+#define IS_CAN_EXTID(EXTID)   ((EXTID) <= 0x1FFFFFFFU)
+#define IS_CAN_DLC(DLC)       ((DLC) <= 8U)
+#define IS_CAN_IDTYPE(IDTYPE)  (((IDTYPE) == CAN_ID_STD) || \
+                                ((IDTYPE) == CAN_ID_EXT))
+#define IS_CAN_RTR(RTR) (((RTR) == CAN_RTR_DATA) || ((RTR) == CAN_RTR_REMOTE))
+#define IS_CAN_RX_FIFO(FIFO) (((FIFO) == CAN_RX_FIFO0) || ((FIFO) == CAN_RX_FIFO1))
+#define IS_CAN_IT(IT) ((IT) <= (CAN_IT_TX_MAILBOX_EMPTY     | CAN_IT_RX_FIFO0_MSG_PENDING      | \
+                                CAN_IT_RX_FIFO0_FULL        | CAN_IT_RX_FIFO0_OVERRUN          | \
+                                CAN_IT_RX_FIFO1_MSG_PENDING | CAN_IT_RX_FIFO1_FULL             | \
+                                CAN_IT_RX_FIFO1_OVERRUN     | CAN_IT_WAKEUP                    | \
+                                CAN_IT_SLEEP_ACK            | CAN_IT_ERROR_WARNING             | \
+                                CAN_IT_ERROR_PASSIVE        | CAN_IT_BUSOFF                    | \
+                                CAN_IT_LAST_ERROR_CODE      | CAN_IT_ERROR))
+
+/**
+  * @}
+  */
+/* End of private macros -----------------------------------------------------*/
+
+/**
+  * @}
+  */
+
+
+#endif /* CAN1 */
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32F4xx_HAL_CAN_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

libs/STM32_HAL/include/stm32f4xx/stm32f4xx_hal_cortex.h

@@ -0,0 +1,410 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_cortex.h
+  * @author  MCD Application Team
+  * @brief   Header file of CORTEX HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */ 
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_CORTEX_H
+#define __STM32F4xx_HAL_CORTEX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup CORTEX
+  * @{
+  */ 
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup CORTEX_Exported_Types Cortex Exported Types
+  * @{
+  */
+
+#if (__MPU_PRESENT == 1U)
+/** @defgroup CORTEX_MPU_Region_Initialization_Structure_definition MPU Region Initialization Structure Definition
+  * @brief  MPU Region initialization structure 
+  * @{
+  */
+typedef struct
+{
+  uint8_t                Enable;                /*!< Specifies the status of the region. 
+                                                     This parameter can be a value of @ref CORTEX_MPU_Region_Enable                 */
+  uint8_t                Number;                /*!< Specifies the number of the region to protect. 
+                                                     This parameter can be a value of @ref CORTEX_MPU_Region_Number                 */
+  uint32_t               BaseAddress;           /*!< Specifies the base address of the region to protect.                           */
+  uint8_t                Size;                  /*!< Specifies the size of the region to protect. 
+                                                     This parameter can be a value of @ref CORTEX_MPU_Region_Size                   */
+  uint8_t                SubRegionDisable;      /*!< Specifies the number of the subregion protection to disable. 
+                                                     This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF    */         
+  uint8_t                TypeExtField;          /*!< Specifies the TEX field level.
+                                                     This parameter can be a value of @ref CORTEX_MPU_TEX_Levels                    */                 
+  uint8_t                AccessPermission;      /*!< Specifies the region access permission type. 
+                                                     This parameter can be a value of @ref CORTEX_MPU_Region_Permission_Attributes  */
+  uint8_t                DisableExec;           /*!< Specifies the instruction access status. 
+                                                     This parameter can be a value of @ref CORTEX_MPU_Instruction_Access            */
+  uint8_t                IsShareable;           /*!< Specifies the shareability status of the protected region. 
+                                                     This parameter can be a value of @ref CORTEX_MPU_Access_Shareable              */
+  uint8_t                IsCacheable;           /*!< Specifies the cacheable status of the region protected. 
+                                                     This parameter can be a value of @ref CORTEX_MPU_Access_Cacheable              */
+  uint8_t                IsBufferable;          /*!< Specifies the bufferable status of the protected region. 
+                                                     This parameter can be a value of @ref CORTEX_MPU_Access_Bufferable             */
+}MPU_Region_InitTypeDef;
+/**
+  * @}
+  */
+#endif /* __MPU_PRESENT */
+
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup CORTEX_Exported_Constants CORTEX Exported Constants
+  * @{
+  */
+
+/** @defgroup CORTEX_Preemption_Priority_Group CORTEX Preemption Priority Group
+  * @{
+  */
+#define NVIC_PRIORITYGROUP_0         0x00000007U /*!< 0 bits for pre-emption priority
+                                                      4 bits for subpriority */
+#define NVIC_PRIORITYGROUP_1         0x00000006U /*!< 1 bits for pre-emption priority
+                                                      3 bits for subpriority */
+#define NVIC_PRIORITYGROUP_2         0x00000005U /*!< 2 bits for pre-emption priority
+                                                      2 bits for subpriority */
+#define NVIC_PRIORITYGROUP_3         0x00000004U /*!< 3 bits for pre-emption priority
+                                                      1 bits for subpriority */
+#define NVIC_PRIORITYGROUP_4         0x00000003U /*!< 4 bits for pre-emption priority
+                                                      0 bits for subpriority */
+/**
+  * @}
+  */
+
+/** @defgroup CORTEX_SysTick_clock_source CORTEX _SysTick clock source 
+  * @{
+  */
+#define SYSTICK_CLKSOURCE_HCLK_DIV8    0x00000000U
+#define SYSTICK_CLKSOURCE_HCLK         0x00000004U
+
+/**
+  * @}
+  */
+
+#if (__MPU_PRESENT == 1)
+/** @defgroup CORTEX_MPU_HFNMI_PRIVDEF_Control MPU HFNMI and PRIVILEGED Access control
+  * @{
+  */
+#define  MPU_HFNMI_PRIVDEF_NONE           0x00000000U
+#define  MPU_HARDFAULT_NMI                MPU_CTRL_HFNMIENA_Msk
+#define  MPU_PRIVILEGED_DEFAULT           MPU_CTRL_PRIVDEFENA_Msk
+#define  MPU_HFNMI_PRIVDEF               (MPU_CTRL_HFNMIENA_Msk | MPU_CTRL_PRIVDEFENA_Msk)
+
+/**
+  * @}
+  */
+
+/** @defgroup CORTEX_MPU_Region_Enable CORTEX MPU Region Enable
+  * @{
+  */
+#define  MPU_REGION_ENABLE     ((uint8_t)0x01)
+#define  MPU_REGION_DISABLE    ((uint8_t)0x00)
+/**
+  * @}
+  */
+
+/** @defgroup CORTEX_MPU_Instruction_Access CORTEX MPU Instruction Access
+  * @{
+  */
+#define  MPU_INSTRUCTION_ACCESS_ENABLE      ((uint8_t)0x00)
+#define  MPU_INSTRUCTION_ACCESS_DISABLE     ((uint8_t)0x01)
+/**
+  * @}
+  */
+
+/** @defgroup CORTEX_MPU_Access_Shareable CORTEX MPU Instruction Access Shareable
+  * @{
+  */
+#define  MPU_ACCESS_SHAREABLE        ((uint8_t)0x01)
+#define  MPU_ACCESS_NOT_SHAREABLE    ((uint8_t)0x00)
+/**
+  * @}
+  */
+
+/** @defgroup CORTEX_MPU_Access_Cacheable CORTEX MPU Instruction Access Cacheable
+  * @{
+  */
+#define  MPU_ACCESS_CACHEABLE         ((uint8_t)0x01)
+#define  MPU_ACCESS_NOT_CACHEABLE     ((uint8_t)0x00)
+/**
+  * @}
+  */
+
+/** @defgroup CORTEX_MPU_Access_Bufferable CORTEX MPU Instruction Access Bufferable
+  * @{
+  */
+#define  MPU_ACCESS_BUFFERABLE         ((uint8_t)0x01)
+#define  MPU_ACCESS_NOT_BUFFERABLE     ((uint8_t)0x00)
+/**
+  * @}
+  */
+
+/** @defgroup CORTEX_MPU_TEX_Levels MPU TEX Levels
+  * @{
+  */
+#define  MPU_TEX_LEVEL0    ((uint8_t)0x00)
+#define  MPU_TEX_LEVEL1    ((uint8_t)0x01)
+#define  MPU_TEX_LEVEL2    ((uint8_t)0x02)
+/**
+  * @}
+  */
+
+/** @defgroup CORTEX_MPU_Region_Size CORTEX MPU Region Size
+  * @{
+  */
+#define   MPU_REGION_SIZE_32B      ((uint8_t)0x04)
+#define   MPU_REGION_SIZE_64B      ((uint8_t)0x05)
+#define   MPU_REGION_SIZE_128B     ((uint8_t)0x06)
+#define   MPU_REGION_SIZE_256B     ((uint8_t)0x07)
+#define   MPU_REGION_SIZE_512B     ((uint8_t)0x08)
+#define   MPU_REGION_SIZE_1KB      ((uint8_t)0x09)
+#define   MPU_REGION_SIZE_2KB      ((uint8_t)0x0A)
+#define   MPU_REGION_SIZE_4KB      ((uint8_t)0x0B)
+#define   MPU_REGION_SIZE_8KB      ((uint8_t)0x0C)
+#define   MPU_REGION_SIZE_16KB     ((uint8_t)0x0D)
+#define   MPU_REGION_SIZE_32KB     ((uint8_t)0x0E)
+#define   MPU_REGION_SIZE_64KB     ((uint8_t)0x0F)
+#define   MPU_REGION_SIZE_128KB    ((uint8_t)0x10)
+#define   MPU_REGION_SIZE_256KB    ((uint8_t)0x11)
+#define   MPU_REGION_SIZE_512KB    ((uint8_t)0x12)
+#define   MPU_REGION_SIZE_1MB      ((uint8_t)0x13)
+#define   MPU_REGION_SIZE_2MB      ((uint8_t)0x14)
+#define   MPU_REGION_SIZE_4MB      ((uint8_t)0x15)
+#define   MPU_REGION_SIZE_8MB      ((uint8_t)0x16)
+#define   MPU_REGION_SIZE_16MB     ((uint8_t)0x17)
+#define   MPU_REGION_SIZE_32MB     ((uint8_t)0x18)
+#define   MPU_REGION_SIZE_64MB     ((uint8_t)0x19)
+#define   MPU_REGION_SIZE_128MB    ((uint8_t)0x1A)
+#define   MPU_REGION_SIZE_256MB    ((uint8_t)0x1B)
+#define   MPU_REGION_SIZE_512MB    ((uint8_t)0x1C)
+#define   MPU_REGION_SIZE_1GB      ((uint8_t)0x1D)
+#define   MPU_REGION_SIZE_2GB      ((uint8_t)0x1E)
+#define   MPU_REGION_SIZE_4GB      ((uint8_t)0x1F)
+/**
+  * @}
+  */
+   
+/** @defgroup CORTEX_MPU_Region_Permission_Attributes CORTEX MPU Region Permission Attributes 
+  * @{
+  */
+#define  MPU_REGION_NO_ACCESS      ((uint8_t)0x00)
+#define  MPU_REGION_PRIV_RW        ((uint8_t)0x01)
+#define  MPU_REGION_PRIV_RW_URO    ((uint8_t)0x02)
+#define  MPU_REGION_FULL_ACCESS    ((uint8_t)0x03)
+#define  MPU_REGION_PRIV_RO        ((uint8_t)0x05)
+#define  MPU_REGION_PRIV_RO_URO    ((uint8_t)0x06)
+/**
+  * @}
+  */
+
+/** @defgroup CORTEX_MPU_Region_Number CORTEX MPU Region Number
+  * @{
+  */
+#define  MPU_REGION_NUMBER0    ((uint8_t)0x00)
+#define  MPU_REGION_NUMBER1    ((uint8_t)0x01)
+#define  MPU_REGION_NUMBER2    ((uint8_t)0x02)
+#define  MPU_REGION_NUMBER3    ((uint8_t)0x03)
+#define  MPU_REGION_NUMBER4    ((uint8_t)0x04)
+#define  MPU_REGION_NUMBER5    ((uint8_t)0x05)
+#define  MPU_REGION_NUMBER6    ((uint8_t)0x06)
+#define  MPU_REGION_NUMBER7    ((uint8_t)0x07)
+/**
+  * @}
+  */
+#endif /* __MPU_PRESENT */
+
+/**
+  * @}
+  */
+
+
+/* Exported Macros -----------------------------------------------------------*/
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup CORTEX_Exported_Functions
+  * @{
+  */
+  
+/** @addtogroup CORTEX_Exported_Functions_Group1
+  * @{
+  */
+/* Initialization and de-initialization functions *****************************/
+void HAL_NVIC_SetPriorityGrouping(uint32_t PriorityGroup);
+void HAL_NVIC_SetPriority(IRQn_Type IRQn, uint32_t PreemptPriority, uint32_t SubPriority);
+void HAL_NVIC_EnableIRQ(IRQn_Type IRQn);
+void HAL_NVIC_DisableIRQ(IRQn_Type IRQn);
+void HAL_NVIC_SystemReset(void);
+uint32_t HAL_SYSTICK_Config(uint32_t TicksNumb);
+/**
+  * @}
+  */
+
+/** @addtogroup CORTEX_Exported_Functions_Group2
+  * @{
+  */
+/* Peripheral Control functions ***********************************************/
+uint32_t HAL_NVIC_GetPriorityGrouping(void);
+void HAL_NVIC_GetPriority(IRQn_Type IRQn, uint32_t PriorityGroup, uint32_t* pPreemptPriority, uint32_t* pSubPriority);
+uint32_t HAL_NVIC_GetPendingIRQ(IRQn_Type IRQn);
+void HAL_NVIC_SetPendingIRQ(IRQn_Type IRQn);
+void HAL_NVIC_ClearPendingIRQ(IRQn_Type IRQn);
+uint32_t HAL_NVIC_GetActive(IRQn_Type IRQn);
+void HAL_SYSTICK_CLKSourceConfig(uint32_t CLKSource);
+void HAL_SYSTICK_IRQHandler(void);
+void HAL_SYSTICK_Callback(void);
+
+#if (__MPU_PRESENT == 1U)
+void HAL_MPU_Enable(uint32_t MPU_Control);
+void HAL_MPU_Disable(void);
+void HAL_MPU_ConfigRegion(MPU_Region_InitTypeDef *MPU_Init);
+#endif /* __MPU_PRESENT */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup CORTEX_Private_Macros CORTEX Private Macros
+  * @{
+  */
+#define IS_NVIC_PRIORITY_GROUP(GROUP) (((GROUP) == NVIC_PRIORITYGROUP_0) || \
+                                       ((GROUP) == NVIC_PRIORITYGROUP_1) || \
+                                       ((GROUP) == NVIC_PRIORITYGROUP_2) || \
+                                       ((GROUP) == NVIC_PRIORITYGROUP_3) || \
+                                       ((GROUP) == NVIC_PRIORITYGROUP_4))
+
+#define IS_NVIC_PREEMPTION_PRIORITY(PRIORITY)  ((PRIORITY) < 0x10U)
+
+#define IS_NVIC_SUB_PRIORITY(PRIORITY)         ((PRIORITY) < 0x10U)
+
+#define IS_NVIC_DEVICE_IRQ(IRQ)                ((IRQ) >= (IRQn_Type)0x00U)
+
+#define IS_SYSTICK_CLK_SOURCE(SOURCE) (((SOURCE) == SYSTICK_CLKSOURCE_HCLK) || \
+                                       ((SOURCE) == SYSTICK_CLKSOURCE_HCLK_DIV8))
+
+#if (__MPU_PRESENT == 1U)
+#define IS_MPU_REGION_ENABLE(STATE) (((STATE) == MPU_REGION_ENABLE) || \
+                                     ((STATE) == MPU_REGION_DISABLE))
+
+#define IS_MPU_INSTRUCTION_ACCESS(STATE) (((STATE) == MPU_INSTRUCTION_ACCESS_ENABLE) || \
+                                          ((STATE) == MPU_INSTRUCTION_ACCESS_DISABLE))
+
+#define IS_MPU_ACCESS_SHAREABLE(STATE)   (((STATE) == MPU_ACCESS_SHAREABLE) || \
+                                          ((STATE) == MPU_ACCESS_NOT_SHAREABLE))
+
+#define IS_MPU_ACCESS_CACHEABLE(STATE)   (((STATE) == MPU_ACCESS_CACHEABLE) || \
+                                          ((STATE) == MPU_ACCESS_NOT_CACHEABLE))
+
+#define IS_MPU_ACCESS_BUFFERABLE(STATE)   (((STATE) == MPU_ACCESS_BUFFERABLE) || \
+                                          ((STATE) == MPU_ACCESS_NOT_BUFFERABLE))
+
+#define IS_MPU_TEX_LEVEL(TYPE) (((TYPE) == MPU_TEX_LEVEL0)  || \
+                                ((TYPE) == MPU_TEX_LEVEL1)  || \
+                                ((TYPE) == MPU_TEX_LEVEL2))
+
+#define IS_MPU_REGION_PERMISSION_ATTRIBUTE(TYPE) (((TYPE) == MPU_REGION_NO_ACCESS)   || \
+                                                  ((TYPE) == MPU_REGION_PRIV_RW)     || \
+                                                  ((TYPE) == MPU_REGION_PRIV_RW_URO) || \
+                                                  ((TYPE) == MPU_REGION_FULL_ACCESS) || \
+                                                  ((TYPE) == MPU_REGION_PRIV_RO)     || \
+                                                  ((TYPE) == MPU_REGION_PRIV_RO_URO))
+
+#define IS_MPU_REGION_NUMBER(NUMBER)    (((NUMBER) == MPU_REGION_NUMBER0) || \
+                                         ((NUMBER) == MPU_REGION_NUMBER1) || \
+                                         ((NUMBER) == MPU_REGION_NUMBER2) || \
+                                         ((NUMBER) == MPU_REGION_NUMBER3) || \
+                                         ((NUMBER) == MPU_REGION_NUMBER4) || \
+                                         ((NUMBER) == MPU_REGION_NUMBER5) || \
+                                         ((NUMBER) == MPU_REGION_NUMBER6) || \
+                                         ((NUMBER) == MPU_REGION_NUMBER7))
+
+#define IS_MPU_REGION_SIZE(SIZE)    (((SIZE) == MPU_REGION_SIZE_32B)   || \
+                                     ((SIZE) == MPU_REGION_SIZE_64B)   || \
+                                     ((SIZE) == MPU_REGION_SIZE_128B)  || \
+                                     ((SIZE) == MPU_REGION_SIZE_256B)  || \
+                                     ((SIZE) == MPU_REGION_SIZE_512B)  || \
+                                     ((SIZE) == MPU_REGION_SIZE_1KB)   || \
+                                     ((SIZE) == MPU_REGION_SIZE_2KB)   || \
+                                     ((SIZE) == MPU_REGION_SIZE_4KB)   || \
+                                     ((SIZE) == MPU_REGION_SIZE_8KB)   || \
+                                     ((SIZE) == MPU_REGION_SIZE_16KB)  || \
+                                     ((SIZE) == MPU_REGION_SIZE_32KB)  || \
+                                     ((SIZE) == MPU_REGION_SIZE_64KB)  || \
+                                     ((SIZE) == MPU_REGION_SIZE_128KB) || \
+                                     ((SIZE) == MPU_REGION_SIZE_256KB) || \
+                                     ((SIZE) == MPU_REGION_SIZE_512KB) || \
+                                     ((SIZE) == MPU_REGION_SIZE_1MB)   || \
+                                     ((SIZE) == MPU_REGION_SIZE_2MB)   || \
+                                     ((SIZE) == MPU_REGION_SIZE_4MB)   || \
+                                     ((SIZE) == MPU_REGION_SIZE_8MB)   || \
+                                     ((SIZE) == MPU_REGION_SIZE_16MB)  || \
+                                     ((SIZE) == MPU_REGION_SIZE_32MB)  || \
+                                     ((SIZE) == MPU_REGION_SIZE_64MB)  || \
+                                     ((SIZE) == MPU_REGION_SIZE_128MB) || \
+                                     ((SIZE) == MPU_REGION_SIZE_256MB) || \
+                                     ((SIZE) == MPU_REGION_SIZE_512MB) || \
+                                     ((SIZE) == MPU_REGION_SIZE_1GB)   || \
+                                     ((SIZE) == MPU_REGION_SIZE_2GB)   || \
+                                     ((SIZE) == MPU_REGION_SIZE_4GB))
+
+#define IS_MPU_SUB_REGION_DISABLE(SUBREGION)  ((SUBREGION) < (uint16_t)0x00FF)
+#endif /* __MPU_PRESENT */
+
+/**                                                                          
+  * @}                                                                  
+  */
+
+/* Private functions ---------------------------------------------------------*/
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */
+  
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_CORTEX_H */
+ 
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

libs/STM32_HAL/include/stm32f4xx/stm32f4xx_hal_def.h

@@ -0,0 +1,211 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_def.h
+  * @author  MCD Application Team
+  * @brief   This file contains HAL common defines, enumeration, macros and 
+  *          structures definitions. 
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_DEF
+#define __STM32F4xx_HAL_DEF
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx.h"
+#include "Legacy/stm32_hal_legacy.h"
+#include <stddef.h>
+
+/* Exported types ------------------------------------------------------------*/
+
+/** 
+  * @brief  HAL Status structures definition  
+  */  
+typedef enum 
+{
+  HAL_OK       = 0x00U,
+  HAL_ERROR    = 0x01U,
+  HAL_BUSY     = 0x02U,
+  HAL_TIMEOUT  = 0x03U
+} HAL_StatusTypeDef;
+
+/** 
+  * @brief  HAL Lock structures definition  
+  */
+typedef enum 
+{
+  HAL_UNLOCKED = 0x00U,
+  HAL_LOCKED   = 0x01U  
+} HAL_LockTypeDef;
+
+/* Exported macro ------------------------------------------------------------*/
+
+#define UNUSED(X) (void)X      /* To avoid gcc/g++ warnings */
+
+#define HAL_MAX_DELAY      0xFFFFFFFFU
+
+#define HAL_IS_BIT_SET(REG, BIT)         (((REG) & (BIT)) == (BIT))
+#define HAL_IS_BIT_CLR(REG, BIT)         (((REG) & (BIT)) == 0U)
+
+#define __HAL_LINKDMA(__HANDLE__, __PPP_DMA_FIELD__, __DMA_HANDLE__)               \
+                        do{                                                      \
+                              (__HANDLE__)->__PPP_DMA_FIELD__ = &(__DMA_HANDLE__); \
+                              (__DMA_HANDLE__).Parent = (__HANDLE__);             \
+                          } while(0U)
+
+/** @brief Reset the Handle's State field.
+  * @param __HANDLE__ specifies the Peripheral Handle.
+  * @note  This macro can be used for the following purpose: 
+  *          - When the Handle is declared as local variable; before passing it as parameter
+  *            to HAL_PPP_Init() for the first time, it is mandatory to use this macro 
+  *            to set to 0 the Handle's "State" field.
+  *            Otherwise, "State" field may have any random value and the first time the function 
+  *            HAL_PPP_Init() is called, the low level hardware initialization will be missed
+  *            (i.e. HAL_PPP_MspInit() will not be executed).
+  *          - When there is a need to reconfigure the low level hardware: instead of calling
+  *            HAL_PPP_DeInit() then HAL_PPP_Init(), user can make a call to this macro then HAL_PPP_Init().
+  *            In this later function, when the Handle's "State" field is set to 0, it will execute the function
+  *            HAL_PPP_MspInit() which will reconfigure the low level hardware.
+  * @retval None
+  */
+#define __HAL_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = 0U)
+
+#if (USE_RTOS == 1U)
+  /* Reserved for future use */
+  #error "USE_RTOS should be 0 in the current HAL release"
+#else
+  #define __HAL_LOCK(__HANDLE__)                                           \
+                                do{                                        \
+                                    if((__HANDLE__)->Lock == HAL_LOCKED)   \
+                                    {                                      \
+                                       return HAL_BUSY;                    \
+                                    }                                      \
+                                    else                                   \
+                                    {                                      \
+                                       (__HANDLE__)->Lock = HAL_LOCKED;    \
+                                    }                                      \
+                                  }while (0U)
+
+  #define __HAL_UNLOCK(__HANDLE__)                                          \
+                                  do{                                       \
+                                      (__HANDLE__)->Lock = HAL_UNLOCKED;    \
+                                    }while (0U)
+#endif /* USE_RTOS */
+
+#if defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) /* ARM Compiler V6 */
+  #ifndef __weak
+    #define __weak  __attribute__((weak))
+  #endif
+  #ifndef __packed
+    #define __packed  __attribute__((packed))
+  #endif
+#elif defined ( __GNUC__ ) && !defined (__CC_ARM) /* GNU Compiler */
+  #ifndef __weak
+    #define __weak   __attribute__((weak))
+  #endif /* __weak */
+  #ifndef __packed
+    #define __packed __attribute__((__packed__))
+  #endif /* __packed */
+#endif /* __GNUC__ */
+
+
+/* Macro to get variable aligned on 4-bytes, for __ICCARM__ the directive "#pragma data_alignment=4" must be used instead */
+#if defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) /* ARM Compiler V6 */
+  #ifndef __ALIGN_BEGIN
+    #define __ALIGN_BEGIN
+  #endif
+  #ifndef __ALIGN_END
+    #define __ALIGN_END      __attribute__ ((aligned (4)))
+  #endif
+#elif defined ( __GNUC__ ) && !defined (__CC_ARM) /* GNU Compiler */
+  #ifndef __ALIGN_END
+#define __ALIGN_END    __attribute__ ((aligned (4)))
+  #endif /* __ALIGN_END */
+  #ifndef __ALIGN_BEGIN  
+    #define __ALIGN_BEGIN
+  #endif /* __ALIGN_BEGIN */
+#else
+  #ifndef __ALIGN_END
+    #define __ALIGN_END
+  #endif /* __ALIGN_END */
+  #ifndef __ALIGN_BEGIN      
+    #if defined   (__CC_ARM)      /* ARM Compiler V5*/
+#define __ALIGN_BEGIN    __align(4)
+    #elif defined (__ICCARM__)    /* IAR Compiler */
+      #define __ALIGN_BEGIN 
+    #endif /* __CC_ARM */
+  #endif /* __ALIGN_BEGIN */
+#endif /* __GNUC__ */
+
+
+/** 
+  * @brief  __RAM_FUNC definition
+  */ 
+#if defined ( __CC_ARM   ) || (defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050))
+/* ARM Compiler V4/V5 and V6
+   --------------------------
+   RAM functions are defined using the toolchain options. 
+   Functions that are executed in RAM should reside in a separate source module.
+   Using the 'Options for File' dialog you can simply change the 'Code / Const' 
+   area of a module to a memory space in physical RAM.
+   Available memory areas are declared in the 'Target' tab of the 'Options for Target'
+   dialog. 
+*/
+#define __RAM_FUNC
+
+#elif defined ( __ICCARM__ )
+/* ICCARM Compiler
+   ---------------
+   RAM functions are defined using a specific toolchain keyword "__ramfunc". 
+*/
+#define __RAM_FUNC __ramfunc
+
+#elif defined   (  __GNUC__  )
+/* GNU Compiler
+   ------------
+  RAM functions are defined using a specific toolchain attribute 
+   "__attribute__((section(".RamFunc")))".
+*/
+#define __RAM_FUNC __attribute__((section(".RamFunc")))
+
+#endif
+
+/** 
+  * @brief  __NOINLINE definition
+  */ 
+#if defined ( __CC_ARM   ) || (defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)) || defined   (  __GNUC__  )
+/* ARM V4/V5 and V6 & GNU Compiler
+   -------------------------------
+*/
+#define __NOINLINE __attribute__ ( (noinline) )
+
+#elif defined ( __ICCARM__ )
+/* ICCARM Compiler
+   ---------------
+*/
+#define __NOINLINE _Pragma("optimize = no_inline")
+
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* ___STM32F4xx_HAL_DEF */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

libs/STM32_HAL/include/stm32f4xx/stm32f4xx_hal_flash.h

@@ -0,0 +1,428 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_flash.h
+  * @author  MCD Application Team
+  * @brief   Header file of FLASH HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */ 
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_FLASH_H
+#define __STM32F4xx_HAL_FLASH_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup FLASH
+  * @{
+  */ 
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup FLASH_Exported_Types FLASH Exported Types
+  * @{
+  */
+ 
+/**
+  * @brief  FLASH Procedure structure definition
+  */
+typedef enum 
+{
+  FLASH_PROC_NONE = 0U, 
+  FLASH_PROC_SECTERASE,
+  FLASH_PROC_MASSERASE,
+  FLASH_PROC_PROGRAM
+} FLASH_ProcedureTypeDef;
+
+/** 
+  * @brief  FLASH handle Structure definition  
+  */
+typedef struct
+{
+  __IO FLASH_ProcedureTypeDef ProcedureOnGoing;   /*Internal variable to indicate which procedure is ongoing or not in IT context*/
+  
+  __IO uint32_t               NbSectorsToErase;   /*Internal variable to save the remaining sectors to erase in IT context*/
+  
+  __IO uint8_t                VoltageForErase;    /*Internal variable to provide voltage range selected by user in IT context*/
+  
+  __IO uint32_t               Sector;             /*Internal variable to define the current sector which is erasing*/
+  
+  __IO uint32_t               Bank;               /*Internal variable to save current bank selected during mass erase*/
+  
+  __IO uint32_t               Address;            /*Internal variable to save address selected for program*/
+  
+  HAL_LockTypeDef             Lock;               /* FLASH locking object                */
+
+  __IO uint32_t               ErrorCode;          /* FLASH error code                    */
+
+}FLASH_ProcessTypeDef;
+
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup FLASH_Exported_Constants FLASH Exported Constants
+  * @{
+  */  
+/** @defgroup FLASH_Error_Code FLASH Error Code
+  * @brief    FLASH Error Code 
+  * @{
+  */ 
+#define HAL_FLASH_ERROR_NONE         0x00000000U    /*!< No error                      */
+#define HAL_FLASH_ERROR_RD           0x00000001U    /*!< Read Protection error         */
+#define HAL_FLASH_ERROR_PGS          0x00000002U    /*!< Programming Sequence error    */
+#define HAL_FLASH_ERROR_PGP          0x00000004U    /*!< Programming Parallelism error */
+#define HAL_FLASH_ERROR_PGA          0x00000008U    /*!< Programming Alignment error   */
+#define HAL_FLASH_ERROR_WRP          0x00000010U    /*!< Write protection error        */
+#define HAL_FLASH_ERROR_OPERATION    0x00000020U    /*!< Operation Error               */
+/**
+  * @}
+  */
+  
+/** @defgroup FLASH_Type_Program FLASH Type Program
+  * @{
+  */ 
+#define FLASH_TYPEPROGRAM_BYTE        0x00000000U  /*!< Program byte (8-bit) at a specified address           */
+#define FLASH_TYPEPROGRAM_HALFWORD    0x00000001U  /*!< Program a half-word (16-bit) at a specified address   */
+#define FLASH_TYPEPROGRAM_WORD        0x00000002U  /*!< Program a word (32-bit) at a specified address        */
+#define FLASH_TYPEPROGRAM_DOUBLEWORD  0x00000003U  /*!< Program a double word (64-bit) at a specified address */
+/**
+  * @}
+  */
+
+/** @defgroup FLASH_Flag_definition FLASH Flag definition
+  * @brief Flag definition
+  * @{
+  */ 
+#define FLASH_FLAG_EOP                 FLASH_SR_EOP            /*!< FLASH End of Operation flag               */
+#define FLASH_FLAG_OPERR               FLASH_SR_SOP            /*!< FLASH operation Error flag                */
+#define FLASH_FLAG_WRPERR              FLASH_SR_WRPERR         /*!< FLASH Write protected error flag          */
+#define FLASH_FLAG_PGAERR              FLASH_SR_PGAERR         /*!< FLASH Programming Alignment error flag    */
+#define FLASH_FLAG_PGPERR              FLASH_SR_PGPERR         /*!< FLASH Programming Parallelism error flag  */
+#define FLASH_FLAG_PGSERR              FLASH_SR_PGSERR         /*!< FLASH Programming Sequence error flag     */
+#if defined(FLASH_SR_RDERR)
+#define FLASH_FLAG_RDERR               FLASH_SR_RDERR          /*!< Read Protection error flag (PCROP)        */
+#endif /* FLASH_SR_RDERR */
+#define FLASH_FLAG_BSY                 FLASH_SR_BSY            /*!< FLASH Busy flag                           */ 
+/**
+  * @}
+  */
+  
+/** @defgroup FLASH_Interrupt_definition FLASH Interrupt definition
+  * @brief FLASH Interrupt definition
+  * @{
+  */ 
+#define FLASH_IT_EOP                   FLASH_CR_EOPIE          /*!< End of FLASH Operation Interrupt source */
+#define FLASH_IT_ERR                   0x02000000U             /*!< Error Interrupt source                  */
+/**
+  * @}
+  */  
+
+/** @defgroup FLASH_Program_Parallelism FLASH Program Parallelism
+  * @{
+  */
+#define FLASH_PSIZE_BYTE           0x00000000U
+#define FLASH_PSIZE_HALF_WORD      0x00000100U
+#define FLASH_PSIZE_WORD           0x00000200U
+#define FLASH_PSIZE_DOUBLE_WORD    0x00000300U
+#define CR_PSIZE_MASK              0xFFFFFCFFU
+/**
+  * @}
+  */ 
+
+/** @defgroup FLASH_Keys FLASH Keys
+  * @{
+  */ 
+#define RDP_KEY                  ((uint16_t)0x00A5)
+#define FLASH_KEY1               0x45670123U
+#define FLASH_KEY2               0xCDEF89ABU
+#define FLASH_OPT_KEY1           0x08192A3BU
+#define FLASH_OPT_KEY2           0x4C5D6E7FU
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */ 
+  
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup FLASH_Exported_Macros FLASH Exported Macros
+  * @{
+  */
+/**
+  * @brief  Set the FLASH Latency.
+  * @param  __LATENCY__ FLASH Latency
+  *         The value of this parameter depend on device used within the same series
+  * @retval none
+  */ 
+#define __HAL_FLASH_SET_LATENCY(__LATENCY__) (*(__IO uint8_t *)ACR_BYTE0_ADDRESS = (uint8_t)(__LATENCY__))
+
+/**
+  * @brief  Get the FLASH Latency.
+  * @retval FLASH Latency
+  *          The value of this parameter depend on device used within the same series
+  */ 
+#define __HAL_FLASH_GET_LATENCY()     (READ_BIT((FLASH->ACR), FLASH_ACR_LATENCY))
+
+/**
+  * @brief  Enable the FLASH prefetch buffer.
+  * @retval none
+  */ 
+#define __HAL_FLASH_PREFETCH_BUFFER_ENABLE()  (FLASH->ACR |= FLASH_ACR_PRFTEN)
+
+/**
+  * @brief  Disable the FLASH prefetch buffer.
+  * @retval none
+  */ 
+#define __HAL_FLASH_PREFETCH_BUFFER_DISABLE()   (FLASH->ACR &= (~FLASH_ACR_PRFTEN))
+
+/**
+  * @brief  Enable the FLASH instruction cache.
+  * @retval none
+  */ 
+#define __HAL_FLASH_INSTRUCTION_CACHE_ENABLE()  (FLASH->ACR |= FLASH_ACR_ICEN)
+
+/**
+  * @brief  Disable the FLASH instruction cache.
+  * @retval none
+  */ 
+#define __HAL_FLASH_INSTRUCTION_CACHE_DISABLE()   (FLASH->ACR &= (~FLASH_ACR_ICEN))
+
+/**
+  * @brief  Enable the FLASH data cache.
+  * @retval none
+  */ 
+#define __HAL_FLASH_DATA_CACHE_ENABLE()  (FLASH->ACR |= FLASH_ACR_DCEN)
+
+/**
+  * @brief  Disable the FLASH data cache.
+  * @retval none
+  */ 
+#define __HAL_FLASH_DATA_CACHE_DISABLE()   (FLASH->ACR &= (~FLASH_ACR_DCEN))
+
+/**
+  * @brief  Resets the FLASH instruction Cache.
+  * @note   This function must be used only when the Instruction Cache is disabled.  
+  * @retval None
+  */
+#define __HAL_FLASH_INSTRUCTION_CACHE_RESET() do {FLASH->ACR |= FLASH_ACR_ICRST;  \
+                                                  FLASH->ACR &= ~FLASH_ACR_ICRST; \
+                                                 }while(0U)
+
+/**
+  * @brief  Resets the FLASH data Cache.
+  * @note   This function must be used only when the data Cache is disabled.  
+  * @retval None
+  */
+#define __HAL_FLASH_DATA_CACHE_RESET() do {FLASH->ACR |= FLASH_ACR_DCRST;  \
+                                           FLASH->ACR &= ~FLASH_ACR_DCRST; \
+                                          }while(0U)
+/**
+  * @brief  Enable the specified FLASH interrupt.
+  * @param  __INTERRUPT__  FLASH interrupt 
+  *         This parameter can be any combination of the following values:
+  *     @arg FLASH_IT_EOP: End of FLASH Operation Interrupt
+  *     @arg FLASH_IT_ERR: Error Interrupt    
+  * @retval none
+  */  
+#define __HAL_FLASH_ENABLE_IT(__INTERRUPT__)  (FLASH->CR |= (__INTERRUPT__))
+
+/**
+  * @brief  Disable the specified FLASH interrupt.
+  * @param  __INTERRUPT__  FLASH interrupt 
+  *         This parameter can be any combination of the following values:
+  *     @arg FLASH_IT_EOP: End of FLASH Operation Interrupt
+  *     @arg FLASH_IT_ERR: Error Interrupt    
+  * @retval none
+  */  
+#define __HAL_FLASH_DISABLE_IT(__INTERRUPT__)  (FLASH->CR &= ~(uint32_t)(__INTERRUPT__))
+
+/**
+  * @brief  Get the specified FLASH flag status. 
+  * @param  __FLAG__ specifies the FLASH flags to check.
+  *          This parameter can be any combination of the following values:
+  *            @arg FLASH_FLAG_EOP   : FLASH End of Operation flag 
+  *            @arg FLASH_FLAG_OPERR : FLASH operation Error flag 
+  *            @arg FLASH_FLAG_WRPERR: FLASH Write protected error flag 
+  *            @arg FLASH_FLAG_PGAERR: FLASH Programming Alignment error flag
+  *            @arg FLASH_FLAG_PGPERR: FLASH Programming Parallelism error flag
+  *            @arg FLASH_FLAG_PGSERR: FLASH Programming Sequence error flag
+  *            @arg FLASH_FLAG_RDERR : FLASH Read Protection error flag (PCROP) (*)
+  *            @arg FLASH_FLAG_BSY   : FLASH Busy flag
+  *           (*) FLASH_FLAG_RDERR is not available for STM32F405xx/407xx/415xx/417xx devices                             
+  * @retval The new state of __FLAG__ (SET or RESET).
+  */
+#define __HAL_FLASH_GET_FLAG(__FLAG__)   ((FLASH->SR & (__FLAG__)))
+
+/**
+  * @brief  Clear the specified FLASH flags.
+  * @param  __FLAG__ specifies the FLASH flags to clear.
+  *          This parameter can be any combination of the following values:
+  *            @arg FLASH_FLAG_EOP   : FLASH End of Operation flag 
+  *            @arg FLASH_FLAG_OPERR : FLASH operation Error flag 
+  *            @arg FLASH_FLAG_WRPERR: FLASH Write protected error flag 
+  *            @arg FLASH_FLAG_PGAERR: FLASH Programming Alignment error flag 
+  *            @arg FLASH_FLAG_PGPERR: FLASH Programming Parallelism error flag
+  *            @arg FLASH_FLAG_PGSERR: FLASH Programming Sequence error flag
+  *            @arg FLASH_FLAG_RDERR : FLASH Read Protection error flag (PCROP) (*)
+  *           (*) FLASH_FLAG_RDERR is not available for STM32F405xx/407xx/415xx/417xx devices   
+  * @retval none
+  */
+#define __HAL_FLASH_CLEAR_FLAG(__FLAG__)   (FLASH->SR = (__FLAG__))
+/**
+  * @}
+  */
+
+/* Include FLASH HAL Extension module */
+#include "stm32f4xx_hal_flash_ex.h"
+#include "stm32f4xx_hal_flash_ramfunc.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup FLASH_Exported_Functions
+  * @{
+  */
+/** @addtogroup FLASH_Exported_Functions_Group1
+  * @{
+  */
+/* Program operation functions  ***********************************************/
+HAL_StatusTypeDef HAL_FLASH_Program(uint32_t TypeProgram, uint32_t Address, uint64_t Data);
+HAL_StatusTypeDef HAL_FLASH_Program_IT(uint32_t TypeProgram, uint32_t Address, uint64_t Data);
+/* FLASH IRQ handler method */
+void HAL_FLASH_IRQHandler(void);
+/* Callbacks in non blocking modes */ 
+void HAL_FLASH_EndOfOperationCallback(uint32_t ReturnValue);
+void HAL_FLASH_OperationErrorCallback(uint32_t ReturnValue);
+/**
+  * @}
+  */
+
+/** @addtogroup FLASH_Exported_Functions_Group2
+  * @{
+  */
+/* Peripheral Control functions  **********************************************/
+HAL_StatusTypeDef HAL_FLASH_Unlock(void);
+HAL_StatusTypeDef HAL_FLASH_Lock(void);
+HAL_StatusTypeDef HAL_FLASH_OB_Unlock(void);
+HAL_StatusTypeDef HAL_FLASH_OB_Lock(void);
+/* Option bytes control */
+HAL_StatusTypeDef HAL_FLASH_OB_Launch(void);
+/**
+  * @}
+  */
+
+/** @addtogroup FLASH_Exported_Functions_Group3
+  * @{
+  */
+/* Peripheral State functions  ************************************************/
+uint32_t HAL_FLASH_GetError(void);
+HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */ 
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup FLASH_Private_Variables FLASH Private Variables
+  * @{
+  */
+
+/**
+  * @}
+  */
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup FLASH_Private_Constants FLASH Private Constants
+  * @{
+  */
+
+/** 
+  * @brief   ACR register byte 0 (Bits[7:0]) base address  
+  */ 
+#define ACR_BYTE0_ADDRESS           0x40023C00U 
+/** 
+  * @brief   OPTCR register byte 0 (Bits[7:0]) base address  
+  */ 
+#define OPTCR_BYTE0_ADDRESS         0x40023C14U
+/** 
+  * @brief   OPTCR register byte 1 (Bits[15:8]) base address  
+  */ 
+#define OPTCR_BYTE1_ADDRESS         0x40023C15U
+/** 
+  * @brief   OPTCR register byte 2 (Bits[23:16]) base address  
+  */ 
+#define OPTCR_BYTE2_ADDRESS         0x40023C16U
+/** 
+  * @brief   OPTCR register byte 3 (Bits[31:24]) base address  
+  */ 
+#define OPTCR_BYTE3_ADDRESS         0x40023C17U
+
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup FLASH_Private_Macros FLASH Private Macros
+  * @{
+  */
+
+/** @defgroup FLASH_IS_FLASH_Definitions FLASH Private macros to check input parameters
+  * @{
+  */
+#define IS_FLASH_TYPEPROGRAM(VALUE)(((VALUE) == FLASH_TYPEPROGRAM_BYTE) || \
+                                    ((VALUE) == FLASH_TYPEPROGRAM_HALFWORD) || \
+                                    ((VALUE) == FLASH_TYPEPROGRAM_WORD) || \
+                                    ((VALUE) == FLASH_TYPEPROGRAM_DOUBLEWORD))  
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup FLASH_Private_Functions FLASH Private Functions
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_FLASH_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

libs/STM32_HAL/include/stm32f4xx/stm32f4xx_hal_flash_ramfunc.h

@@ -0,0 +1,79 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_flash_ramfunc.h
+  * @author  MCD Application Team
+  * @brief   Header file of FLASH RAMFUNC driver.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */ 
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_FLASH_RAMFUNC_H
+#define __STM32F4xx_FLASH_RAMFUNC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F412Zx) ||\
+    defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx)  
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup FLASH_RAMFUNC
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup FLASH_RAMFUNC_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup FLASH_RAMFUNC_Exported_Functions_Group1
+  * @{
+  */   
+__RAM_FUNC HAL_StatusTypeDef HAL_FLASHEx_StopFlashInterfaceClk(void);
+__RAM_FUNC HAL_StatusTypeDef HAL_FLASHEx_StartFlashInterfaceClk(void);
+__RAM_FUNC HAL_StatusTypeDef HAL_FLASHEx_EnableFlashSleepMode(void);
+__RAM_FUNC HAL_StatusTypeDef HAL_FLASHEx_DisableFlashSleepMode(void);
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */
+
+#endif /* STM32F410xx || STM32F411xE || STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx */  
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F4xx_FLASH_RAMFUNC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

libs/STM32_HAL/include/stm32f4xx/stm32f4xx_hal_gpio.h

@@ -0,0 +1,327 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_gpio.h
+  * @author  MCD Application Team
+  * @brief   Header file of GPIO HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */ 
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_GPIO_H
+#define __STM32F4xx_HAL_GPIO_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup GPIO
+  * @{
+  */ 
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup GPIO_Exported_Types GPIO Exported Types
+  * @{
+  */
+
+/** 
+  * @brief GPIO Init structure definition  
+  */ 
+typedef struct
+{
+  uint32_t Pin;       /*!< Specifies the GPIO pins to be configured.
+                           This parameter can be any value of @ref GPIO_pins_define */
+
+  uint32_t Mode;      /*!< Specifies the operating mode for the selected pins.
+                           This parameter can be a value of @ref GPIO_mode_define */
+
+  uint32_t Pull;      /*!< Specifies the Pull-up or Pull-Down activation for the selected pins.
+                           This parameter can be a value of @ref GPIO_pull_define */
+
+  uint32_t Speed;     /*!< Specifies the speed for the selected pins.
+                           This parameter can be a value of @ref GPIO_speed_define */
+
+  uint32_t Alternate;  /*!< Peripheral to be connected to the selected pins. 
+                            This parameter can be a value of @ref GPIO_Alternate_function_selection */
+}GPIO_InitTypeDef;
+
+/** 
+  * @brief  GPIO Bit SET and Bit RESET enumeration 
+  */
+typedef enum
+{
+  GPIO_PIN_RESET = 0,
+  GPIO_PIN_SET
+}GPIO_PinState;
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup GPIO_Exported_Constants GPIO Exported Constants
+  * @{
+  */ 
+
+/** @defgroup GPIO_pins_define GPIO pins define
+  * @{
+  */
+#define GPIO_PIN_0                 ((uint16_t)0x0001)  /* Pin 0 selected    */
+#define GPIO_PIN_1                 ((uint16_t)0x0002)  /* Pin 1 selected    */
+#define GPIO_PIN_2                 ((uint16_t)0x0004)  /* Pin 2 selected    */
+#define GPIO_PIN_3                 ((uint16_t)0x0008)  /* Pin 3 selected    */
+#define GPIO_PIN_4                 ((uint16_t)0x0010)  /* Pin 4 selected    */
+#define GPIO_PIN_5                 ((uint16_t)0x0020)  /* Pin 5 selected    */
+#define GPIO_PIN_6                 ((uint16_t)0x0040)  /* Pin 6 selected    */
+#define GPIO_PIN_7                 ((uint16_t)0x0080)  /* Pin 7 selected    */
+#define GPIO_PIN_8                 ((uint16_t)0x0100)  /* Pin 8 selected    */
+#define GPIO_PIN_9                 ((uint16_t)0x0200)  /* Pin 9 selected    */
+#define GPIO_PIN_10                ((uint16_t)0x0400)  /* Pin 10 selected   */
+#define GPIO_PIN_11                ((uint16_t)0x0800)  /* Pin 11 selected   */
+#define GPIO_PIN_12                ((uint16_t)0x1000)  /* Pin 12 selected   */
+#define GPIO_PIN_13                ((uint16_t)0x2000)  /* Pin 13 selected   */
+#define GPIO_PIN_14                ((uint16_t)0x4000)  /* Pin 14 selected   */
+#define GPIO_PIN_15                ((uint16_t)0x8000)  /* Pin 15 selected   */
+#define GPIO_PIN_All               ((uint16_t)0xFFFF)  /* All pins selected */
+
+#define GPIO_PIN_MASK              0x0000FFFFU /* PIN mask for assert test */
+/**
+  * @}
+  */
+
+/** @defgroup GPIO_mode_define GPIO mode define
+  * @brief GPIO Configuration Mode
+  *        Elements values convention: 0x00WX00YZ
+  *           - W  : EXTI trigger detection on 3 bits
+  *           - X  : EXTI mode (IT or Event) on 2 bits
+  *           - Y  : Output type (Push Pull or Open Drain) on 1 bit
+  *           - Z  : GPIO mode (Input, Output, Alternate or Analog) on 2 bits
+  * @{
+  */ 
+#define  GPIO_MODE_INPUT                        MODE_INPUT                                                  /*!< Input Floating Mode                   */
+#define  GPIO_MODE_OUTPUT_PP                    (MODE_OUTPUT | OUTPUT_PP)                                   /*!< Output Push Pull Mode                 */
+#define  GPIO_MODE_OUTPUT_OD                    (MODE_OUTPUT | OUTPUT_OD)                                   /*!< Output Open Drain Mode                */
+#define  GPIO_MODE_AF_PP                        (MODE_AF | OUTPUT_PP)                                       /*!< Alternate Function Push Pull Mode     */
+#define  GPIO_MODE_AF_OD                        (MODE_AF | OUTPUT_OD)                                       /*!< Alternate Function Open Drain Mode    */
+
+#define  GPIO_MODE_ANALOG                       MODE_ANALOG                                                 /*!< Analog Mode  */
+    
+#define  GPIO_MODE_IT_RISING                    (MODE_INPUT | EXTI_IT | TRIGGER_RISING)                     /*!< External Interrupt Mode with Rising edge trigger detection          */
+#define  GPIO_MODE_IT_FALLING                   (MODE_INPUT | EXTI_IT | TRIGGER_FALLING)                    /*!< External Interrupt Mode with Falling edge trigger detection         */
+#define  GPIO_MODE_IT_RISING_FALLING            (MODE_INPUT | EXTI_IT | TRIGGER_RISING | TRIGGER_FALLING)   /*!< External Interrupt Mode with Rising/Falling edge trigger detection  */
+ 
+#define  GPIO_MODE_EVT_RISING                   (MODE_INPUT | EXTI_EVT | TRIGGER_RISING)                     /*!< External Event Mode with Rising edge trigger detection             */
+#define  GPIO_MODE_EVT_FALLING                  (MODE_INPUT | EXTI_EVT | TRIGGER_FALLING)                    /*!< External Event Mode with Falling edge trigger detection            */
+#define  GPIO_MODE_EVT_RISING_FALLING           (MODE_INPUT | EXTI_EVT | TRIGGER_RISING | TRIGGER_FALLING)   /*!< External Event Mode with Rising/Falling edge trigger detection     */
+
+/**
+  * @}
+  */
+
+/** @defgroup GPIO_speed_define  GPIO speed define
+  * @brief GPIO Output Maximum frequency
+  * @{
+  */
+#define  GPIO_SPEED_FREQ_LOW         0x00000000U  /*!< IO works at 2 MHz, please refer to the product datasheet */
+#define  GPIO_SPEED_FREQ_MEDIUM      0x00000001U  /*!< range 12,5 MHz to 50 MHz, please refer to the product datasheet */
+#define  GPIO_SPEED_FREQ_HIGH        0x00000002U  /*!< range 25 MHz to 100 MHz, please refer to the product datasheet  */
+#define  GPIO_SPEED_FREQ_VERY_HIGH   0x00000003U  /*!< range 50 MHz to 200 MHz, please refer to the product datasheet  */
+/**
+  * @}
+  */
+
+ /** @defgroup GPIO_pull_define GPIO pull define
+   * @brief GPIO Pull-Up or Pull-Down Activation
+   * @{
+   */  
+#define  GPIO_NOPULL        0x00000000U   /*!< No Pull-up or Pull-down activation  */
+#define  GPIO_PULLUP        0x00000001U   /*!< Pull-up activation                  */
+#define  GPIO_PULLDOWN      0x00000002U   /*!< Pull-down activation                */
+/**
+  * @}
+  */
+  
+/**
+  * @}
+  */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup GPIO_Exported_Macros GPIO Exported Macros
+  * @{
+  */
+
+/**
+  * @brief  Checks whether the specified EXTI line flag is set or not.
+  * @param  __EXTI_LINE__ specifies the EXTI line flag to check.
+  *         This parameter can be GPIO_PIN_x where x can be(0..15)
+  * @retval The new state of __EXTI_LINE__ (SET or RESET).
+  */
+#define __HAL_GPIO_EXTI_GET_FLAG(__EXTI_LINE__) (EXTI->PR & (__EXTI_LINE__))
+
+/**
+  * @brief  Clears the EXTI's line pending flags.
+  * @param  __EXTI_LINE__ specifies the EXTI lines flags to clear.
+  *         This parameter can be any combination of GPIO_PIN_x where x can be (0..15)
+  * @retval None
+  */
+#define __HAL_GPIO_EXTI_CLEAR_FLAG(__EXTI_LINE__) (EXTI->PR = (__EXTI_LINE__))
+
+/**
+  * @brief  Checks whether the specified EXTI line is asserted or not.
+  * @param  __EXTI_LINE__ specifies the EXTI line to check.
+  *          This parameter can be GPIO_PIN_x where x can be(0..15)
+  * @retval The new state of __EXTI_LINE__ (SET or RESET).
+  */
+#define __HAL_GPIO_EXTI_GET_IT(__EXTI_LINE__) (EXTI->PR & (__EXTI_LINE__))
+
+/**
+  * @brief  Clears the EXTI's line pending bits.
+  * @param  __EXTI_LINE__ specifies the EXTI lines to clear.
+  *          This parameter can be any combination of GPIO_PIN_x where x can be (0..15)
+  * @retval None
+  */
+#define __HAL_GPIO_EXTI_CLEAR_IT(__EXTI_LINE__) (EXTI->PR = (__EXTI_LINE__))
+
+/**
+  * @brief  Generates a Software interrupt on selected EXTI line.
+  * @param  __EXTI_LINE__ specifies the EXTI line to check.
+  *          This parameter can be GPIO_PIN_x where x can be(0..15)
+  * @retval None
+  */
+#define __HAL_GPIO_EXTI_GENERATE_SWIT(__EXTI_LINE__) (EXTI->SWIER |= (__EXTI_LINE__))
+/**
+  * @}
+  */
+
+/* Include GPIO HAL Extension module */
+#include "stm32f4xx_hal_gpio_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup GPIO_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup GPIO_Exported_Functions_Group1
+  * @{
+  */
+/* Initialization and de-initialization functions *****************************/
+void  HAL_GPIO_Init(GPIO_TypeDef  *GPIOx, GPIO_InitTypeDef *GPIO_Init);
+void  HAL_GPIO_DeInit(GPIO_TypeDef  *GPIOx, uint32_t GPIO_Pin);
+/**
+  * @}
+  */
+
+/** @addtogroup GPIO_Exported_Functions_Group2
+  * @{
+  */
+/* IO operation functions *****************************************************/
+GPIO_PinState HAL_GPIO_ReadPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
+void HAL_GPIO_WritePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState);
+void HAL_GPIO_TogglePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
+HAL_StatusTypeDef HAL_GPIO_LockPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
+void HAL_GPIO_EXTI_IRQHandler(uint16_t GPIO_Pin);
+void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin);
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */ 
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup GPIO_Private_Constants GPIO Private Constants
+  * @{
+  */
+#define GPIO_MODE_Pos                           0U
+#define GPIO_MODE                               (0x3UL << GPIO_MODE_Pos)
+#define MODE_INPUT                              (0x0UL << GPIO_MODE_Pos)
+#define MODE_OUTPUT                             (0x1UL << GPIO_MODE_Pos)
+#define MODE_AF                                 (0x2UL << GPIO_MODE_Pos)
+#define MODE_ANALOG                             (0x3UL << GPIO_MODE_Pos)
+#define OUTPUT_TYPE_Pos                         4U
+#define OUTPUT_TYPE                             (0x1UL << OUTPUT_TYPE_Pos)
+#define OUTPUT_PP                               (0x0UL << OUTPUT_TYPE_Pos)
+#define OUTPUT_OD                               (0x1UL << OUTPUT_TYPE_Pos)
+#define EXTI_MODE_Pos                           16U
+#define EXTI_MODE                               (0x3UL << EXTI_MODE_Pos)
+#define EXTI_IT                                 (0x1UL << EXTI_MODE_Pos)
+#define EXTI_EVT                                (0x2UL << EXTI_MODE_Pos)
+#define TRIGGER_MODE_Pos                         20U
+#define TRIGGER_MODE                            (0x7UL << TRIGGER_MODE_Pos)
+#define TRIGGER_RISING                          (0x1UL << TRIGGER_MODE_Pos)
+#define TRIGGER_FALLING                         (0x2UL << TRIGGER_MODE_Pos)
+
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup GPIO_Private_Macros GPIO Private Macros
+  * @{
+  */
+#define IS_GPIO_PIN_ACTION(ACTION) (((ACTION) == GPIO_PIN_RESET) || ((ACTION) == GPIO_PIN_SET))
+#define IS_GPIO_PIN(PIN)           (((((uint32_t)PIN) & GPIO_PIN_MASK ) != 0x00U) && ((((uint32_t)PIN) & ~GPIO_PIN_MASK) == 0x00U))
+#define IS_GPIO_MODE(MODE) (((MODE) == GPIO_MODE_INPUT)              ||\
+                            ((MODE) == GPIO_MODE_OUTPUT_PP)          ||\
+                            ((MODE) == GPIO_MODE_OUTPUT_OD)          ||\
+                            ((MODE) == GPIO_MODE_AF_PP)              ||\
+                            ((MODE) == GPIO_MODE_AF_OD)              ||\
+                            ((MODE) == GPIO_MODE_IT_RISING)          ||\
+                            ((MODE) == GPIO_MODE_IT_FALLING)         ||\
+                            ((MODE) == GPIO_MODE_IT_RISING_FALLING)  ||\
+                            ((MODE) == GPIO_MODE_EVT_RISING)         ||\
+                            ((MODE) == GPIO_MODE_EVT_FALLING)        ||\
+                            ((MODE) == GPIO_MODE_EVT_RISING_FALLING) ||\
+                            ((MODE) == GPIO_MODE_ANALOG))
+#define IS_GPIO_SPEED(SPEED) (((SPEED) == GPIO_SPEED_FREQ_LOW)  || ((SPEED) == GPIO_SPEED_FREQ_MEDIUM) || \
+                              ((SPEED) == GPIO_SPEED_FREQ_HIGH) || ((SPEED) == GPIO_SPEED_FREQ_VERY_HIGH))
+#define IS_GPIO_PULL(PULL) (((PULL) == GPIO_NOPULL) || ((PULL) == GPIO_PULLUP) || \
+                            ((PULL) == GPIO_PULLDOWN))
+/**
+  * @}
+  */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup GPIO_Private_Functions GPIO Private Functions
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_GPIO_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

libs/STM32_HAL/include/stm32f4xx/stm32f4xx_hal_pcd.h

@@ -0,0 +1,472 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_pcd.h
+  * @author  MCD Application Team
+  * @brief   Header file of PCD HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32F4xx_HAL_PCD_H
+#define STM32F4xx_HAL_PCD_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_ll_usb.h"
+
+#if defined (USB_OTG_FS) || defined (USB_OTG_HS)
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup PCD
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup PCD_Exported_Types PCD Exported Types
+  * @{
+  */
+
+/**
+  * @brief  PCD State structure definition
+  */
+typedef enum
+{
+  HAL_PCD_STATE_RESET   = 0x00,
+  HAL_PCD_STATE_READY   = 0x01,
+  HAL_PCD_STATE_ERROR   = 0x02,
+  HAL_PCD_STATE_BUSY    = 0x03,
+  HAL_PCD_STATE_TIMEOUT = 0x04
+} PCD_StateTypeDef;
+
+/* Device LPM suspend state */
+typedef enum
+{
+  LPM_L0 = 0x00, /* on */
+  LPM_L1 = 0x01, /* LPM L1 sleep */
+  LPM_L2 = 0x02, /* suspend */
+  LPM_L3 = 0x03, /* off */
+} PCD_LPM_StateTypeDef;
+
+typedef enum
+{
+  PCD_LPM_L0_ACTIVE = 0x00, /* on */
+  PCD_LPM_L1_ACTIVE = 0x01, /* LPM L1 sleep */
+} PCD_LPM_MsgTypeDef;
+
+typedef enum
+{
+  PCD_BCD_ERROR                     = 0xFF,
+  PCD_BCD_CONTACT_DETECTION         = 0xFE,
+  PCD_BCD_STD_DOWNSTREAM_PORT       = 0xFD,
+  PCD_BCD_CHARGING_DOWNSTREAM_PORT  = 0xFC,
+  PCD_BCD_DEDICATED_CHARGING_PORT   = 0xFB,
+  PCD_BCD_DISCOVERY_COMPLETED       = 0x00,
+
+} PCD_BCD_MsgTypeDef;
+
+#if defined (USB_OTG_FS) || defined (USB_OTG_HS)
+typedef USB_OTG_GlobalTypeDef  PCD_TypeDef;
+typedef USB_OTG_CfgTypeDef     PCD_InitTypeDef;
+typedef USB_OTG_EPTypeDef      PCD_EPTypeDef;
+#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */
+
+/**
+  * @brief  PCD Handle Structure definition
+  */
+#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U)
+typedef struct __PCD_HandleTypeDef
+#else
+typedef struct
+#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */
+{
+  PCD_TypeDef             *Instance;   /*!< Register base address             */
+  PCD_InitTypeDef         Init;        /*!< PCD required parameters           */
+  __IO uint8_t            USB_Address; /*!< USB Address                       */
+  PCD_EPTypeDef           IN_ep[16];   /*!< IN endpoint parameters            */
+  PCD_EPTypeDef           OUT_ep[16];  /*!< OUT endpoint parameters           */
+  HAL_LockTypeDef         Lock;        /*!< PCD peripheral status             */
+  __IO PCD_StateTypeDef   State;       /*!< PCD communication state           */
+  __IO  uint32_t          ErrorCode;   /*!< PCD Error code                    */
+  uint32_t                Setup[12];   /*!< Setup packet buffer               */
+  PCD_LPM_StateTypeDef    LPM_State;   /*!< LPM State                         */
+  uint32_t                BESL;
+
+
+  uint32_t lpm_active;                 /*!< Enable or disable the Link Power Management .
+                                       This parameter can be set to ENABLE or DISABLE        */
+
+  uint32_t battery_charging_active;    /*!< Enable or disable Battery charging.
+                                       This parameter can be set to ENABLE or DISABLE        */
+  void                    *pData;      /*!< Pointer to upper stack Handler */
+
+#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U)
+  void (* SOFCallback)(struct __PCD_HandleTypeDef *hpcd);                              /*!< USB OTG PCD SOF callback                */
+  void (* SetupStageCallback)(struct __PCD_HandleTypeDef *hpcd);                       /*!< USB OTG PCD Setup Stage callback        */
+  void (* ResetCallback)(struct __PCD_HandleTypeDef *hpcd);                            /*!< USB OTG PCD Reset callback              */
+  void (* SuspendCallback)(struct __PCD_HandleTypeDef *hpcd);                          /*!< USB OTG PCD Suspend callback            */
+  void (* ResumeCallback)(struct __PCD_HandleTypeDef *hpcd);                           /*!< USB OTG PCD Resume callback             */
+  void (* ConnectCallback)(struct __PCD_HandleTypeDef *hpcd);                          /*!< USB OTG PCD Connect callback            */
+  void (* DisconnectCallback)(struct __PCD_HandleTypeDef *hpcd);                       /*!< USB OTG PCD Disconnect callback         */
+
+  void (* DataOutStageCallback)(struct __PCD_HandleTypeDef *hpcd, uint8_t epnum);      /*!< USB OTG PCD Data OUT Stage callback     */
+  void (* DataInStageCallback)(struct __PCD_HandleTypeDef *hpcd, uint8_t epnum);       /*!< USB OTG PCD Data IN Stage callback      */
+  void (* ISOOUTIncompleteCallback)(struct __PCD_HandleTypeDef *hpcd, uint8_t epnum);  /*!< USB OTG PCD ISO OUT Incomplete callback */
+  void (* ISOINIncompleteCallback)(struct __PCD_HandleTypeDef *hpcd, uint8_t epnum);   /*!< USB OTG PCD ISO IN Incomplete callback  */
+  void (* BCDCallback)(struct __PCD_HandleTypeDef *hpcd, PCD_BCD_MsgTypeDef msg);      /*!< USB OTG PCD BCD callback                */
+  void (* LPMCallback)(struct __PCD_HandleTypeDef *hpcd, PCD_LPM_MsgTypeDef msg);      /*!< USB OTG PCD LPM callback                */
+
+  void (* MspInitCallback)(struct __PCD_HandleTypeDef *hpcd);                          /*!< USB OTG PCD Msp Init callback           */
+  void (* MspDeInitCallback)(struct __PCD_HandleTypeDef *hpcd);                        /*!< USB OTG PCD Msp DeInit callback         */
+#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */
+} PCD_HandleTypeDef;
+
+/**
+  * @}
+  */
+
+/* Include PCD HAL Extended module */
+#include "stm32f4xx_hal_pcd_ex.h"
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup PCD_Exported_Constants PCD Exported Constants
+  * @{
+  */
+
+/** @defgroup PCD_Speed PCD Speed
+  * @{
+  */
+#define PCD_SPEED_HIGH               USBD_HS_SPEED
+#define PCD_SPEED_HIGH_IN_FULL       USBD_HSINFS_SPEED
+#define PCD_SPEED_FULL               USBD_FS_SPEED
+/**
+  * @}
+  */
+
+/** @defgroup PCD_PHY_Module PCD PHY Module
+  * @{
+  */
+#define PCD_PHY_ULPI                 1U
+#define PCD_PHY_EMBEDDED             2U
+#define PCD_PHY_UTMI                 3U
+/**
+  * @}
+  */
+
+/** @defgroup PCD_Error_Code_definition PCD Error Code definition
+  * @brief  PCD Error Code definition
+  * @{
+  */
+#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U)
+#define  HAL_PCD_ERROR_INVALID_CALLBACK                        (0x00000010U)    /*!< Invalid Callback error  */
+#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup PCD_Exported_Macros PCD Exported Macros
+  *  @brief macros to handle interrupts and specific clock configurations
+  * @{
+  */
+#if defined (USB_OTG_FS) || defined (USB_OTG_HS)
+#define __HAL_PCD_ENABLE(__HANDLE__)                       (void)USB_EnableGlobalInt ((__HANDLE__)->Instance)
+#define __HAL_PCD_DISABLE(__HANDLE__)                      (void)USB_DisableGlobalInt ((__HANDLE__)->Instance)
+
+#define __HAL_PCD_GET_FLAG(__HANDLE__, __INTERRUPT__) \
+  ((USB_ReadInterrupts((__HANDLE__)->Instance) & (__INTERRUPT__)) == (__INTERRUPT__))
+
+#define __HAL_PCD_CLEAR_FLAG(__HANDLE__, __INTERRUPT__)    (((__HANDLE__)->Instance->GINTSTS) &=  (__INTERRUPT__))
+#define __HAL_PCD_IS_INVALID_INTERRUPT(__HANDLE__)         (USB_ReadInterrupts((__HANDLE__)->Instance) == 0U)
+
+#define __HAL_PCD_UNGATE_PHYCLOCK(__HANDLE__) \
+  *(__IO uint32_t *)((uint32_t)((__HANDLE__)->Instance) + USB_OTG_PCGCCTL_BASE) &= ~(USB_OTG_PCGCCTL_STOPCLK)
+
+#define __HAL_PCD_GATE_PHYCLOCK(__HANDLE__) \
+  *(__IO uint32_t *)((uint32_t)((__HANDLE__)->Instance) + USB_OTG_PCGCCTL_BASE) |= USB_OTG_PCGCCTL_STOPCLK
+
+#define __HAL_PCD_IS_PHY_SUSPENDED(__HANDLE__) \
+  ((*(__IO uint32_t *)((uint32_t)((__HANDLE__)->Instance) + USB_OTG_PCGCCTL_BASE)) & 0x10U)
+
+#define __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_IT()    EXTI->IMR |= (USB_OTG_HS_WAKEUP_EXTI_LINE)
+#define __HAL_USB_OTG_HS_WAKEUP_EXTI_DISABLE_IT()   EXTI->IMR &= ~(USB_OTG_HS_WAKEUP_EXTI_LINE)
+#define __HAL_USB_OTG_HS_WAKEUP_EXTI_GET_FLAG()     EXTI->PR & (USB_OTG_HS_WAKEUP_EXTI_LINE)
+#define __HAL_USB_OTG_HS_WAKEUP_EXTI_CLEAR_FLAG()   EXTI->PR = (USB_OTG_HS_WAKEUP_EXTI_LINE)
+
+#define __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_RISING_EDGE() \
+  do { \
+    EXTI->FTSR &= ~(USB_OTG_HS_WAKEUP_EXTI_LINE); \
+    EXTI->RTSR |= USB_OTG_HS_WAKEUP_EXTI_LINE; \
+  } while(0U)
+#define __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_IT()    EXTI->IMR |= USB_OTG_FS_WAKEUP_EXTI_LINE
+#define __HAL_USB_OTG_FS_WAKEUP_EXTI_DISABLE_IT()   EXTI->IMR &= ~(USB_OTG_FS_WAKEUP_EXTI_LINE)
+#define __HAL_USB_OTG_FS_WAKEUP_EXTI_GET_FLAG()     EXTI->PR & (USB_OTG_FS_WAKEUP_EXTI_LINE)
+#define __HAL_USB_OTG_FS_WAKEUP_EXTI_CLEAR_FLAG()   EXTI->PR = USB_OTG_FS_WAKEUP_EXTI_LINE
+
+#define __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_RISING_EDGE() \
+  do { \
+    EXTI->FTSR &= ~(USB_OTG_FS_WAKEUP_EXTI_LINE); \
+    EXTI->RTSR |= USB_OTG_FS_WAKEUP_EXTI_LINE; \
+  } while(0U)
+#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */
+
+
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup PCD_Exported_Functions PCD Exported Functions
+  * @{
+  */
+
+/* Initialization/de-initialization functions  ********************************/
+/** @addtogroup PCD_Exported_Functions_Group1 Initialization and de-initialization functions
+  * @{
+  */
+HAL_StatusTypeDef HAL_PCD_Init(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCD_DeInit(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_MspInit(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_MspDeInit(PCD_HandleTypeDef *hpcd);
+
+#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U)
+/** @defgroup HAL_PCD_Callback_ID_enumeration_definition HAL USB OTG PCD Callback ID enumeration definition
+  * @brief  HAL USB OTG PCD Callback ID enumeration definition
+  * @{
+  */
+typedef enum
+{
+  HAL_PCD_SOF_CB_ID          = 0x01,      /*!< USB PCD SOF callback ID          */
+  HAL_PCD_SETUPSTAGE_CB_ID   = 0x02,      /*!< USB PCD Setup Stage callback ID  */
+  HAL_PCD_RESET_CB_ID        = 0x03,      /*!< USB PCD Reset callback ID        */
+  HAL_PCD_SUSPEND_CB_ID      = 0x04,      /*!< USB PCD Suspend callback ID      */
+  HAL_PCD_RESUME_CB_ID       = 0x05,      /*!< USB PCD Resume callback ID       */
+  HAL_PCD_CONNECT_CB_ID      = 0x06,      /*!< USB PCD Connect callback ID      */
+  HAL_PCD_DISCONNECT_CB_ID   = 0x07,      /*!< USB PCD Disconnect callback ID   */
+
+  HAL_PCD_MSPINIT_CB_ID      = 0x08,      /*!< USB PCD MspInit callback ID      */
+  HAL_PCD_MSPDEINIT_CB_ID    = 0x09       /*!< USB PCD MspDeInit callback ID    */
+
+} HAL_PCD_CallbackIDTypeDef;
+/**
+  * @}
+  */
+
+/** @defgroup HAL_PCD_Callback_pointer_definition HAL USB OTG PCD Callback pointer definition
+  * @brief  HAL USB OTG PCD Callback pointer definition
+  * @{
+  */
+
+typedef void (*pPCD_CallbackTypeDef)(PCD_HandleTypeDef *hpcd);                                   /*!< pointer to a common USB OTG PCD callback function  */
+typedef void (*pPCD_DataOutStageCallbackTypeDef)(PCD_HandleTypeDef *hpcd, uint8_t epnum);        /*!< pointer to USB OTG PCD Data OUT Stage callback     */
+typedef void (*pPCD_DataInStageCallbackTypeDef)(PCD_HandleTypeDef *hpcd, uint8_t epnum);         /*!< pointer to USB OTG PCD Data IN Stage callback      */
+typedef void (*pPCD_IsoOutIncpltCallbackTypeDef)(PCD_HandleTypeDef *hpcd, uint8_t epnum);        /*!< pointer to USB OTG PCD ISO OUT Incomplete callback */
+typedef void (*pPCD_IsoInIncpltCallbackTypeDef)(PCD_HandleTypeDef *hpcd, uint8_t epnum);         /*!< pointer to USB OTG PCD ISO IN Incomplete callback  */
+typedef void (*pPCD_LpmCallbackTypeDef)(PCD_HandleTypeDef *hpcd, PCD_LPM_MsgTypeDef msg);        /*!< pointer to USB OTG PCD LPM callback                */
+typedef void (*pPCD_BcdCallbackTypeDef)(PCD_HandleTypeDef *hpcd, PCD_BCD_MsgTypeDef msg);        /*!< pointer to USB OTG PCD BCD callback                */
+
+/**
+  * @}
+  */
+
+HAL_StatusTypeDef HAL_PCD_RegisterCallback(PCD_HandleTypeDef *hpcd,
+                                           HAL_PCD_CallbackIDTypeDef CallbackID,
+                                           pPCD_CallbackTypeDef pCallback);
+
+HAL_StatusTypeDef HAL_PCD_UnRegisterCallback(PCD_HandleTypeDef *hpcd,
+                                             HAL_PCD_CallbackIDTypeDef CallbackID);
+
+HAL_StatusTypeDef HAL_PCD_RegisterDataOutStageCallback(PCD_HandleTypeDef *hpcd,
+                                                       pPCD_DataOutStageCallbackTypeDef pCallback);
+
+HAL_StatusTypeDef HAL_PCD_UnRegisterDataOutStageCallback(PCD_HandleTypeDef *hpcd);
+
+HAL_StatusTypeDef HAL_PCD_RegisterDataInStageCallback(PCD_HandleTypeDef *hpcd,
+                                                      pPCD_DataInStageCallbackTypeDef pCallback);
+
+HAL_StatusTypeDef HAL_PCD_UnRegisterDataInStageCallback(PCD_HandleTypeDef *hpcd);
+
+HAL_StatusTypeDef HAL_PCD_RegisterIsoOutIncpltCallback(PCD_HandleTypeDef *hpcd,
+                                                       pPCD_IsoOutIncpltCallbackTypeDef pCallback);
+
+HAL_StatusTypeDef HAL_PCD_UnRegisterIsoOutIncpltCallback(PCD_HandleTypeDef *hpcd);
+
+HAL_StatusTypeDef HAL_PCD_RegisterIsoInIncpltCallback(PCD_HandleTypeDef *hpcd,
+                                                      pPCD_IsoInIncpltCallbackTypeDef pCallback);
+
+HAL_StatusTypeDef HAL_PCD_UnRegisterIsoInIncpltCallback(PCD_HandleTypeDef *hpcd);
+
+HAL_StatusTypeDef HAL_PCD_RegisterBcdCallback(PCD_HandleTypeDef *hpcd,
+                                              pPCD_BcdCallbackTypeDef pCallback);
+
+HAL_StatusTypeDef HAL_PCD_UnRegisterBcdCallback(PCD_HandleTypeDef *hpcd);
+
+HAL_StatusTypeDef HAL_PCD_RegisterLpmCallback(PCD_HandleTypeDef *hpcd,
+                                              pPCD_LpmCallbackTypeDef pCallback);
+
+HAL_StatusTypeDef HAL_PCD_UnRegisterLpmCallback(PCD_HandleTypeDef *hpcd);
+#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */
+/**
+  * @}
+  */
+
+/* I/O operation functions  ***************************************************/
+/* Non-Blocking mode: Interrupt */
+/** @addtogroup PCD_Exported_Functions_Group2 Input and Output operation functions
+  * @{
+  */
+HAL_StatusTypeDef HAL_PCD_Start(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCD_Stop(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_IRQHandler(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_WKUP_IRQHandler(PCD_HandleTypeDef *hpcd);
+
+void HAL_PCD_SOFCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_SetupStageCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_ResetCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_SuspendCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_ResumeCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_ConnectCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_DisconnectCallback(PCD_HandleTypeDef *hpcd);
+
+void HAL_PCD_DataOutStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
+void HAL_PCD_DataInStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
+void HAL_PCD_ISOOUTIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
+void HAL_PCD_ISOINIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
+/**
+  * @}
+  */
+
+/* Peripheral Control functions  **********************************************/
+/** @addtogroup PCD_Exported_Functions_Group3 Peripheral Control functions
+  * @{
+  */
+HAL_StatusTypeDef HAL_PCD_DevConnect(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCD_DevDisconnect(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCD_SetAddress(PCD_HandleTypeDef *hpcd, uint8_t address);
+HAL_StatusTypeDef HAL_PCD_EP_Open(PCD_HandleTypeDef *hpcd, uint8_t ep_addr,
+                                  uint16_t ep_mps, uint8_t ep_type);
+
+HAL_StatusTypeDef HAL_PCD_EP_Close(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
+HAL_StatusTypeDef HAL_PCD_EP_Receive(PCD_HandleTypeDef *hpcd, uint8_t ep_addr,
+                                     uint8_t *pBuf, uint32_t len);
+
+HAL_StatusTypeDef HAL_PCD_EP_Transmit(PCD_HandleTypeDef *hpcd, uint8_t ep_addr,
+                                      uint8_t *pBuf, uint32_t len);
+
+
+HAL_StatusTypeDef HAL_PCD_EP_SetStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
+HAL_StatusTypeDef HAL_PCD_EP_ClrStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
+HAL_StatusTypeDef HAL_PCD_EP_Flush(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
+HAL_StatusTypeDef HAL_PCD_ActivateRemoteWakeup(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCD_DeActivateRemoteWakeup(PCD_HandleTypeDef *hpcd);
+
+uint32_t          HAL_PCD_EP_GetRxCount(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
+/**
+  * @}
+  */
+
+/* Peripheral State functions  ************************************************/
+/** @addtogroup PCD_Exported_Functions_Group4 Peripheral State functions
+  * @{
+  */
+PCD_StateTypeDef HAL_PCD_GetState(PCD_HandleTypeDef *hpcd);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup PCD_Private_Constants PCD Private Constants
+  * @{
+  */
+/** @defgroup USB_EXTI_Line_Interrupt USB EXTI line interrupt
+  * @{
+  */
+#if defined (USB_OTG_FS) || defined (USB_OTG_HS)
+#define USB_OTG_FS_WAKEUP_EXTI_LINE                                   (0x1U << 18)  /*!< USB FS EXTI Line WakeUp Interrupt */
+#define USB_OTG_HS_WAKEUP_EXTI_LINE                                   (0x1U << 20)  /*!< USB HS EXTI Line WakeUp Interrupt */
+#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */
+
+
+/**
+  * @}
+  */
+/**
+  * @}
+  */
+
+#if defined (USB_OTG_FS) || defined (USB_OTG_HS)
+#ifndef USB_OTG_DOEPINT_OTEPSPR
+#define USB_OTG_DOEPINT_OTEPSPR                (0x1UL << 5)      /*!< Status Phase Received interrupt */
+#endif /* defined USB_OTG_DOEPINT_OTEPSPR */
+
+#ifndef USB_OTG_DOEPMSK_OTEPSPRM
+#define USB_OTG_DOEPMSK_OTEPSPRM               (0x1UL << 5)      /*!< Setup Packet Received interrupt mask */
+#endif /* defined USB_OTG_DOEPMSK_OTEPSPRM */
+
+#ifndef USB_OTG_DOEPINT_NAK
+#define USB_OTG_DOEPINT_NAK                    (0x1UL << 13)      /*!< NAK interrupt */
+#endif /* defined USB_OTG_DOEPINT_NAK */
+
+#ifndef USB_OTG_DOEPMSK_NAKM
+#define USB_OTG_DOEPMSK_NAKM                   (0x1UL << 13)      /*!< OUT Packet NAK interrupt mask */
+#endif /* defined USB_OTG_DOEPMSK_NAKM */
+
+#ifndef USB_OTG_DOEPINT_STPKTRX
+#define USB_OTG_DOEPINT_STPKTRX                (0x1UL << 15)      /*!< Setup Packet Received interrupt */
+#endif /* defined USB_OTG_DOEPINT_STPKTRX */
+
+#ifndef USB_OTG_DOEPMSK_NYETM
+#define USB_OTG_DOEPMSK_NYETM                  (0x1UL << 14)      /*!< Setup Packet Received interrupt mask */
+#endif /* defined USB_OTG_DOEPMSK_NYETM */
+#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup PCD_Private_Macros PCD Private Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32F4xx_HAL_PCD_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

libs/STM32_HAL/include/stm32f4xx/stm32f4xx_hal_pcd_ex.h

@@ -0,0 +1,91 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_pcd_ex.h
+  * @author  MCD Application Team
+  * @brief   Header file of PCD HAL Extension module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32F4xx_HAL_PCD_EX_H
+#define STM32F4xx_HAL_PCD_EX_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+#if defined (USB_OTG_FS) || defined (USB_OTG_HS)
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup PCDEx
+  * @{
+  */
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/* Exported macros -----------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup PCDEx_Exported_Functions PCDEx Exported Functions
+  * @{
+  */
+/** @addtogroup PCDEx_Exported_Functions_Group1 Peripheral Control functions
+  * @{
+  */
+
+#if defined (USB_OTG_FS) || defined (USB_OTG_HS)
+HAL_StatusTypeDef HAL_PCDEx_SetTxFiFo(PCD_HandleTypeDef *hpcd, uint8_t fifo, uint16_t size);
+HAL_StatusTypeDef HAL_PCDEx_SetRxFiFo(PCD_HandleTypeDef *hpcd, uint16_t size);
+#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */
+
+#if defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx)
+HAL_StatusTypeDef HAL_PCDEx_ActivateLPM(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCDEx_DeActivateLPM(PCD_HandleTypeDef *hpcd);
+#endif /* defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) */
+#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx)
+HAL_StatusTypeDef HAL_PCDEx_ActivateBCD(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCDEx_DeActivateBCD(PCD_HandleTypeDef *hpcd);
+void HAL_PCDEx_BCD_VBUSDetect(PCD_HandleTypeDef *hpcd);
+#endif /* defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) */
+void HAL_PCDEx_LPM_Callback(PCD_HandleTypeDef *hpcd, PCD_LPM_MsgTypeDef msg);
+void HAL_PCDEx_BCD_Callback(PCD_HandleTypeDef *hpcd, PCD_BCD_MsgTypeDef msg);
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* STM32F4xx_HAL_PCD_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

libs/STM32_HAL/include/stm32f4xx/stm32f4xx_hal_pwr.h

@@ -0,0 +1,431 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_pwr.h
+  * @author  MCD Application Team
+  * @brief   Header file of PWR HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */ 
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_PWR_H
+#define __STM32F4xx_HAL_PWR_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup PWR
+  * @{
+  */ 
+
+/* Exported types ------------------------------------------------------------*/
+
+/** @defgroup PWR_Exported_Types PWR Exported Types
+  * @{
+  */
+   
+/**
+  * @brief  PWR PVD configuration structure definition
+  */
+typedef struct
+{
+  uint32_t PVDLevel;   /*!< PVDLevel: Specifies the PVD detection level.
+                            This parameter can be a value of @ref PWR_PVD_detection_level */
+
+  uint32_t Mode;      /*!< Mode: Specifies the operating mode for the selected pins.
+                           This parameter can be a value of @ref PWR_PVD_Mode */
+}PWR_PVDTypeDef;
+
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup PWR_Exported_Constants PWR Exported Constants
+  * @{
+  */
+  
+/** @defgroup PWR_WakeUp_Pins PWR WakeUp Pins
+  * @{
+  */
+#define PWR_WAKEUP_PIN1                 0x00000100U
+/**
+  * @}
+  */
+
+/** @defgroup PWR_PVD_detection_level PWR PVD detection level
+  * @{
+  */ 
+#define PWR_PVDLEVEL_0                  PWR_CR_PLS_LEV0
+#define PWR_PVDLEVEL_1                  PWR_CR_PLS_LEV1
+#define PWR_PVDLEVEL_2                  PWR_CR_PLS_LEV2
+#define PWR_PVDLEVEL_3                  PWR_CR_PLS_LEV3
+#define PWR_PVDLEVEL_4                  PWR_CR_PLS_LEV4
+#define PWR_PVDLEVEL_5                  PWR_CR_PLS_LEV5
+#define PWR_PVDLEVEL_6                  PWR_CR_PLS_LEV6
+#define PWR_PVDLEVEL_7                  PWR_CR_PLS_LEV7/* External input analog voltage 
+                                                          (Compare internally to VREFINT) */
+/**
+  * @}
+  */   
+ 
+/** @defgroup PWR_PVD_Mode PWR PVD Mode
+  * @{
+  */
+#define PWR_PVD_MODE_NORMAL                 0x00000000U   /*!< basic mode is used */
+#define PWR_PVD_MODE_IT_RISING              0x00010001U   /*!< External Interrupt Mode with Rising edge trigger detection */
+#define PWR_PVD_MODE_IT_FALLING             0x00010002U   /*!< External Interrupt Mode with Falling edge trigger detection */
+#define PWR_PVD_MODE_IT_RISING_FALLING      0x00010003U   /*!< External Interrupt Mode with Rising/Falling edge trigger detection */
+#define PWR_PVD_MODE_EVENT_RISING           0x00020001U   /*!< Event Mode with Rising edge trigger detection */
+#define PWR_PVD_MODE_EVENT_FALLING          0x00020002U   /*!< Event Mode with Falling edge trigger detection */
+#define PWR_PVD_MODE_EVENT_RISING_FALLING   0x00020003U   /*!< Event Mode with Rising/Falling edge trigger detection */
+/**
+  * @}
+  */
+
+
+/** @defgroup PWR_Regulator_state_in_STOP_mode PWR Regulator state in SLEEP/STOP mode
+  * @{
+  */
+#define PWR_MAINREGULATOR_ON                        0x00000000U
+#define PWR_LOWPOWERREGULATOR_ON                    PWR_CR_LPDS
+/**
+  * @}
+  */
+    
+/** @defgroup PWR_SLEEP_mode_entry PWR SLEEP mode entry
+  * @{
+  */
+#define PWR_SLEEPENTRY_WFI              ((uint8_t)0x01)
+#define PWR_SLEEPENTRY_WFE              ((uint8_t)0x02)
+/**
+  * @}
+  */
+
+/** @defgroup PWR_STOP_mode_entry PWR STOP mode entry
+  * @{
+  */
+#define PWR_STOPENTRY_WFI               ((uint8_t)0x01)
+#define PWR_STOPENTRY_WFE               ((uint8_t)0x02)
+/**
+  * @}
+  */
+
+/** @defgroup PWR_Flag PWR Flag
+  * @{
+  */
+#define PWR_FLAG_WU                     PWR_CSR_WUF
+#define PWR_FLAG_SB                     PWR_CSR_SBF
+#define PWR_FLAG_PVDO                   PWR_CSR_PVDO
+#define PWR_FLAG_BRR                    PWR_CSR_BRR
+#define PWR_FLAG_VOSRDY                 PWR_CSR_VOSRDY
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */ 
+  
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup PWR_Exported_Macro PWR Exported Macro
+  * @{
+  */
+
+/** @brief  Check PWR flag is set or not.
+  * @param  __FLAG__ specifies the flag to check.
+  *           This parameter can be one of the following values:
+  *            @arg PWR_FLAG_WU: Wake Up flag. This flag indicates that a wakeup event 
+  *                  was received from the WKUP pin or from the RTC alarm (Alarm A 
+  *                  or Alarm B), RTC Tamper event, RTC TimeStamp event or RTC Wakeup.
+  *                  An additional wakeup event is detected if the WKUP pin is enabled 
+  *                  (by setting the EWUP bit) when the WKUP pin level is already high.  
+  *            @arg PWR_FLAG_SB: StandBy flag. This flag indicates that the system was
+  *                  resumed from StandBy mode.    
+  *            @arg PWR_FLAG_PVDO: PVD Output. This flag is valid only if PVD is enabled 
+  *                  by the HAL_PWR_EnablePVD() function. The PVD is stopped by Standby mode 
+  *                  For this reason, this bit is equal to 0 after Standby or reset
+  *                  until the PVDE bit is set.
+  *            @arg PWR_FLAG_BRR: Backup regulator ready flag. This bit is not reset 
+  *                  when the device wakes up from Standby mode or by a system reset 
+  *                  or power reset.  
+  *            @arg PWR_FLAG_VOSRDY: This flag indicates that the Regulator voltage 
+  *                 scaling output selection is ready.
+  * @retval The new state of __FLAG__ (TRUE or FALSE).
+  */
+#define __HAL_PWR_GET_FLAG(__FLAG__) ((PWR->CSR & (__FLAG__)) == (__FLAG__))
+
+/** @brief  Clear the PWR's pending flags.
+  * @param  __FLAG__ specifies the flag to clear.
+  *          This parameter can be one of the following values:
+  *            @arg PWR_FLAG_WU: Wake Up flag
+  *            @arg PWR_FLAG_SB: StandBy flag
+  */
+#define __HAL_PWR_CLEAR_FLAG(__FLAG__) (PWR->CR |=  (__FLAG__) << 2U)
+
+/**
+  * @brief Enable the PVD Exti Line 16.
+  * @retval None.
+  */
+#define __HAL_PWR_PVD_EXTI_ENABLE_IT()   (EXTI->IMR |= (PWR_EXTI_LINE_PVD))
+
+/**
+  * @brief Disable the PVD EXTI Line 16.
+  * @retval None.
+  */
+#define __HAL_PWR_PVD_EXTI_DISABLE_IT()  (EXTI->IMR &= ~(PWR_EXTI_LINE_PVD))
+
+/**
+  * @brief Enable event on PVD Exti Line 16.
+  * @retval None.
+  */
+#define __HAL_PWR_PVD_EXTI_ENABLE_EVENT()   (EXTI->EMR |= (PWR_EXTI_LINE_PVD))
+
+/**
+  * @brief Disable event on PVD Exti Line 16.
+  * @retval None.
+  */
+#define __HAL_PWR_PVD_EXTI_DISABLE_EVENT()  (EXTI->EMR &= ~(PWR_EXTI_LINE_PVD))
+
+/**
+  * @brief Enable the PVD Extended Interrupt Rising Trigger.
+  * @retval None.
+  */
+#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE()   SET_BIT(EXTI->RTSR, PWR_EXTI_LINE_PVD)
+
+/**
+  * @brief Disable the PVD Extended Interrupt Rising Trigger.
+  * @retval None.
+  */
+#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE()  CLEAR_BIT(EXTI->RTSR, PWR_EXTI_LINE_PVD)
+
+/**
+  * @brief Enable the PVD Extended Interrupt Falling Trigger.
+  * @retval None.
+  */
+#define __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE()   SET_BIT(EXTI->FTSR, PWR_EXTI_LINE_PVD)
+
+
+/**
+  * @brief Disable the PVD Extended Interrupt Falling Trigger.
+  * @retval None.
+  */
+#define __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE()  CLEAR_BIT(EXTI->FTSR, PWR_EXTI_LINE_PVD)
+
+
+/**
+  * @brief  PVD EXTI line configuration: set rising & falling edge trigger.
+  * @retval None.
+  */
+#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_FALLING_EDGE()   do{__HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE();\
+                                                             __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE();\
+                                                            }while(0U)
+
+/**
+  * @brief Disable the PVD Extended Interrupt Rising & Falling Trigger.
+  * This parameter can be:
+  * @retval None.
+  */
+#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_FALLING_EDGE()  do{__HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE();\
+                                                             __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE();\
+                                                            }while(0U) 
+
+/**
+  * @brief checks whether the specified PVD Exti interrupt flag is set or not.
+  * @retval EXTI PVD Line Status.
+  */
+#define __HAL_PWR_PVD_EXTI_GET_FLAG()  (EXTI->PR & (PWR_EXTI_LINE_PVD))
+
+/**
+  * @brief Clear the PVD Exti flag.
+  * @retval None.
+  */
+#define __HAL_PWR_PVD_EXTI_CLEAR_FLAG()  (EXTI->PR = (PWR_EXTI_LINE_PVD))
+
+/**
+  * @brief  Generates a Software interrupt on PVD EXTI line.
+  * @retval None
+  */
+#define __HAL_PWR_PVD_EXTI_GENERATE_SWIT() (EXTI->SWIER |= (PWR_EXTI_LINE_PVD))
+
+/**
+  * @}
+  */
+
+/* Include PWR HAL Extension module */
+#include "stm32f4xx_hal_pwr_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup PWR_Exported_Functions PWR Exported Functions
+  * @{
+  */
+  
+/** @addtogroup PWR_Exported_Functions_Group1 Initialization and de-initialization functions 
+  * @{
+  */
+/* Initialization and de-initialization functions *****************************/
+void HAL_PWR_DeInit(void);
+void HAL_PWR_EnableBkUpAccess(void);
+void HAL_PWR_DisableBkUpAccess(void);
+/**
+  * @}
+  */
+
+/** @addtogroup PWR_Exported_Functions_Group2 Peripheral Control functions 
+  * @{
+  */
+/* Peripheral Control functions  **********************************************/
+/* PVD configuration */
+void HAL_PWR_ConfigPVD(PWR_PVDTypeDef *sConfigPVD);
+void HAL_PWR_EnablePVD(void);
+void HAL_PWR_DisablePVD(void);
+
+/* WakeUp pins configuration */
+void HAL_PWR_EnableWakeUpPin(uint32_t WakeUpPinx);
+void HAL_PWR_DisableWakeUpPin(uint32_t WakeUpPinx);
+
+/* Low Power modes entry */
+void HAL_PWR_EnterSTOPMode(uint32_t Regulator, uint8_t STOPEntry);
+void HAL_PWR_EnterSLEEPMode(uint32_t Regulator, uint8_t SLEEPEntry);
+void HAL_PWR_EnterSTANDBYMode(void);
+
+/* Power PVD IRQ Handler */
+void HAL_PWR_PVD_IRQHandler(void);
+void HAL_PWR_PVDCallback(void);
+
+/* Cortex System Control functions  *******************************************/
+void HAL_PWR_EnableSleepOnExit(void);
+void HAL_PWR_DisableSleepOnExit(void);
+void HAL_PWR_EnableSEVOnPend(void);
+void HAL_PWR_DisableSEVOnPend(void);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup PWR_Private_Constants PWR Private Constants
+  * @{
+  */
+
+/** @defgroup PWR_PVD_EXTI_Line PWR PVD EXTI Line
+  * @{
+  */
+#define PWR_EXTI_LINE_PVD  ((uint32_t)EXTI_IMR_MR16)  /*!< External interrupt line 16 Connected to the PVD EXTI Line */
+/**
+  * @}
+  */
+
+/** @defgroup PWR_register_alias_address PWR Register alias address
+  * @{
+  */
+/* ------------- PWR registers bit address in the alias region ---------------*/
+#define PWR_OFFSET               (PWR_BASE - PERIPH_BASE)
+#define PWR_CR_OFFSET            0x00U
+#define PWR_CSR_OFFSET           0x04U
+#define PWR_CR_OFFSET_BB         (PWR_OFFSET + PWR_CR_OFFSET)
+#define PWR_CSR_OFFSET_BB        (PWR_OFFSET + PWR_CSR_OFFSET)
+/**
+  * @}
+  */
+
+/** @defgroup PWR_CR_register_alias PWR CR Register alias address
+  * @{
+  */
+/* --- CR Register ---*/
+/* Alias word address of DBP bit */
+#define DBP_BIT_NUMBER   PWR_CR_DBP_Pos
+#define CR_DBP_BB        (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32U) + (DBP_BIT_NUMBER * 4U))
+
+/* Alias word address of PVDE bit */
+#define PVDE_BIT_NUMBER  PWR_CR_PVDE_Pos
+#define CR_PVDE_BB       (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32U) + (PVDE_BIT_NUMBER * 4U))
+
+/* Alias word address of VOS bit */
+#define VOS_BIT_NUMBER  PWR_CR_VOS_Pos
+#define CR_VOS_BB      (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32U) + (VOS_BIT_NUMBER * 4U))
+/**
+  * @}
+  */
+
+/** @defgroup PWR_CSR_register_alias PWR CSR Register alias address
+  * @{
+  */
+/* --- CSR Register ---*/
+/* Alias word address of EWUP bit */
+#define EWUP_BIT_NUMBER  PWR_CSR_EWUP_Pos
+#define CSR_EWUP_BB      (PERIPH_BB_BASE + (PWR_CSR_OFFSET_BB * 32U) + (EWUP_BIT_NUMBER * 4U))
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup PWR_Private_Macros PWR Private Macros
+  * @{
+  */
+
+/** @defgroup PWR_IS_PWR_Definitions PWR Private macros to check input parameters
+  * @{
+  */
+#define IS_PWR_PVD_LEVEL(LEVEL) (((LEVEL) == PWR_PVDLEVEL_0) || ((LEVEL) == PWR_PVDLEVEL_1)|| \
+                                 ((LEVEL) == PWR_PVDLEVEL_2) || ((LEVEL) == PWR_PVDLEVEL_3)|| \
+                                 ((LEVEL) == PWR_PVDLEVEL_4) || ((LEVEL) == PWR_PVDLEVEL_5)|| \
+                                 ((LEVEL) == PWR_PVDLEVEL_6) || ((LEVEL) == PWR_PVDLEVEL_7))
+#define IS_PWR_PVD_MODE(MODE) (((MODE) == PWR_PVD_MODE_IT_RISING)|| ((MODE) == PWR_PVD_MODE_IT_FALLING) || \
+                              ((MODE) == PWR_PVD_MODE_IT_RISING_FALLING) || ((MODE) == PWR_PVD_MODE_EVENT_RISING) || \
+                              ((MODE) == PWR_PVD_MODE_EVENT_FALLING) || ((MODE) == PWR_PVD_MODE_EVENT_RISING_FALLING) || \
+                              ((MODE) == PWR_PVD_MODE_NORMAL))
+#define IS_PWR_REGULATOR(REGULATOR) (((REGULATOR) == PWR_MAINREGULATOR_ON) || \
+                                     ((REGULATOR) == PWR_LOWPOWERREGULATOR_ON))
+#define IS_PWR_SLEEP_ENTRY(ENTRY) (((ENTRY) == PWR_SLEEPENTRY_WFI) || ((ENTRY) == PWR_SLEEPENTRY_WFE))
+#define IS_PWR_STOP_ENTRY(ENTRY) (((ENTRY) == PWR_STOPENTRY_WFI) || ((ENTRY) == PWR_STOPENTRY_WFE))
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */
+  
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F4xx_HAL_PWR_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

libs/STM32_HAL/include/stm32f4xx/stm32f4xx_hal_pwr_ex.h

@@ -0,0 +1,344 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_pwr_ex.h
+  * @author  MCD Application Team
+  * @brief   Header file of PWR HAL Extension module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */ 
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_PWR_EX_H
+#define __STM32F4xx_HAL_PWR_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup PWREx
+  * @{
+  */ 
+
+/* Exported types ------------------------------------------------------------*/ 
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup PWREx_Exported_Constants PWREx Exported Constants
+  * @{
+  */
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+    defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
+   
+/** @defgroup PWREx_Regulator_state_in_UnderDrive_mode PWREx Regulator state in UnderDrive mode
+  * @{
+  */
+#define PWR_MAINREGULATOR_UNDERDRIVE_ON                       PWR_CR_MRUDS
+#define PWR_LOWPOWERREGULATOR_UNDERDRIVE_ON                   ((uint32_t)(PWR_CR_LPDS | PWR_CR_LPUDS))
+/**
+  * @}
+  */ 
+  
+/** @defgroup PWREx_Over_Under_Drive_Flag PWREx Over Under Drive Flag
+  * @{
+  */
+#define PWR_FLAG_ODRDY                  PWR_CSR_ODRDY
+#define PWR_FLAG_ODSWRDY                PWR_CSR_ODSWRDY
+#define PWR_FLAG_UDRDY                  PWR_CSR_UDSWRDY
+/**
+  * @}
+  */
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */
+
+/** @defgroup PWREx_Regulator_Voltage_Scale PWREx Regulator Voltage Scale
+  * @{
+  */
+#if defined(STM32F405xx) || defined(STM32F407xx) || defined(STM32F415xx) || defined(STM32F417xx)   
+#define PWR_REGULATOR_VOLTAGE_SCALE1         PWR_CR_VOS             /* Scale 1 mode(default value at reset): the maximum value of fHCLK = 168 MHz. */
+#define PWR_REGULATOR_VOLTAGE_SCALE2         0x00000000U            /* Scale 2 mode: the maximum value of fHCLK = 144 MHz. */
+#else
+#define PWR_REGULATOR_VOLTAGE_SCALE1         PWR_CR_VOS             /* Scale 1 mode(default value at reset): the maximum value of fHCLK is 168 MHz. It can be extended to
+                                                                       180 MHz by activating the over-drive mode. */
+#define PWR_REGULATOR_VOLTAGE_SCALE2         PWR_CR_VOS_1           /* Scale 2 mode: the maximum value of fHCLK is 144 MHz. It can be extended to
+                                                                       168 MHz by activating the over-drive mode. */
+#define PWR_REGULATOR_VOLTAGE_SCALE3         PWR_CR_VOS_0           /* Scale 3 mode: the maximum value of fHCLK is 120 MHz. */
+#endif /* STM32F405xx || STM32F407xx || STM32F415xx || STM32F417xx */ 
+/**
+  * @}
+  */
+#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F446xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \
+    defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx)
+/** @defgroup PWREx_WakeUp_Pins PWREx WakeUp Pins
+  * @{
+  */
+#define PWR_WAKEUP_PIN2                 0x00000080U
+#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \
+    defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) 
+#define PWR_WAKEUP_PIN3                 0x00000040U
+#endif /* STM32F410xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Zx || STM32F412Vx || \
+          STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */
+/**
+  * @}
+  */   
+#endif /* STM32F410xx || STM32F446xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx ||
+          STM32F413xx || STM32F423xx */
+
+/**
+  * @}
+  */ 
+  
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup PWREx_Exported_Constants PWREx Exported Constants
+  *  @{
+  */
+
+#if defined(STM32F405xx) || defined(STM32F407xx) || defined(STM32F415xx) || defined(STM32F417xx)
+/** @brief  macros configure the main internal regulator output voltage.
+  * @param  __REGULATOR__ specifies the regulator output voltage to achieve
+  *         a tradeoff between performance and power consumption when the device does
+  *         not operate at the maximum frequency (refer to the datasheets for more details).
+  *          This parameter can be one of the following values:
+  *            @arg PWR_REGULATOR_VOLTAGE_SCALE1: Regulator voltage output Scale 1 mode
+  *            @arg PWR_REGULATOR_VOLTAGE_SCALE2: Regulator voltage output Scale 2 mode
+  * @retval None
+  */
+#define __HAL_PWR_VOLTAGESCALING_CONFIG(__REGULATOR__) do {                                                     \
+                                                            __IO uint32_t tmpreg = 0x00U;                        \
+                                                            MODIFY_REG(PWR->CR, PWR_CR_VOS, (__REGULATOR__));   \
+                                                            /* Delay after an RCC peripheral clock enabling */  \
+                                                            tmpreg = READ_BIT(PWR->CR, PWR_CR_VOS);             \
+                                                            UNUSED(tmpreg);                                     \
+                                                          } while(0U)
+#else
+/** @brief  macros configure the main internal regulator output voltage.
+  * @param  __REGULATOR__ specifies the regulator output voltage to achieve
+  *         a tradeoff between performance and power consumption when the device does
+  *         not operate at the maximum frequency (refer to the datasheets for more details).
+  *          This parameter can be one of the following values:
+  *            @arg PWR_REGULATOR_VOLTAGE_SCALE1: Regulator voltage output Scale 1 mode
+  *            @arg PWR_REGULATOR_VOLTAGE_SCALE2: Regulator voltage output Scale 2 mode
+  *            @arg PWR_REGULATOR_VOLTAGE_SCALE3: Regulator voltage output Scale 3 mode
+  * @retval None
+  */
+#define __HAL_PWR_VOLTAGESCALING_CONFIG(__REGULATOR__) do {                                                     \
+                                                            __IO uint32_t tmpreg = 0x00U;                        \
+                                                            MODIFY_REG(PWR->CR, PWR_CR_VOS, (__REGULATOR__));   \
+                                                            /* Delay after an RCC peripheral clock enabling */  \
+                                                            tmpreg = READ_BIT(PWR->CR, PWR_CR_VOS);             \
+                                                            UNUSED(tmpreg);                                     \
+                                                          } while(0U)
+#endif /* STM32F405xx || STM32F407xx || STM32F415xx || STM32F417xx */ 
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+    defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
+/** @brief Macros to enable or disable the Over drive mode.
+  * @note  These macros can be used only for STM32F42xx/STM3243xx devices.
+  */
+#define __HAL_PWR_OVERDRIVE_ENABLE() (*(__IO uint32_t *) CR_ODEN_BB = ENABLE)
+#define __HAL_PWR_OVERDRIVE_DISABLE() (*(__IO uint32_t *) CR_ODEN_BB = DISABLE)
+
+/** @brief Macros to enable or disable the Over drive switching.
+  * @note  These macros can be used only for STM32F42xx/STM3243xx devices. 
+  */
+#define __HAL_PWR_OVERDRIVESWITCHING_ENABLE() (*(__IO uint32_t *) CR_ODSWEN_BB = ENABLE)
+#define __HAL_PWR_OVERDRIVESWITCHING_DISABLE() (*(__IO uint32_t *) CR_ODSWEN_BB = DISABLE)
+
+/** @brief Macros to enable or disable the Under drive mode.
+  * @note  This mode is enabled only with STOP low power mode.
+  *        In this mode, the 1.2V domain is preserved in reduced leakage mode. This 
+  *        mode is only available when the main regulator or the low power regulator 
+  *        is in low voltage mode.      
+  * @note  If the Under-drive mode was enabled, it is automatically disabled after 
+  *        exiting Stop mode. 
+  *        When the voltage regulator operates in Under-drive mode, an additional  
+  *        startup delay is induced when waking up from Stop mode.
+  */
+#define __HAL_PWR_UNDERDRIVE_ENABLE() (PWR->CR |= (uint32_t)PWR_CR_UDEN)
+#define __HAL_PWR_UNDERDRIVE_DISABLE() (PWR->CR &= (uint32_t)(~PWR_CR_UDEN))
+
+/** @brief  Check PWR flag is set or not.
+  * @note   These macros can be used only for STM32F42xx/STM3243xx devices.
+  * @param  __FLAG__ specifies the flag to check.
+  *         This parameter can be one of the following values:
+  *            @arg PWR_FLAG_ODRDY: This flag indicates that the Over-drive mode
+  *                                 is ready 
+  *            @arg PWR_FLAG_ODSWRDY: This flag indicates that the Over-drive mode
+  *                                   switching is ready  
+  *            @arg PWR_FLAG_UDRDY: This flag indicates that the Under-drive mode
+  *                                 is enabled in Stop mode
+  * @retval The new state of __FLAG__ (TRUE or FALSE).
+  */
+#define __HAL_PWR_GET_ODRUDR_FLAG(__FLAG__) ((PWR->CSR & (__FLAG__)) == (__FLAG__))
+
+/** @brief Clear the Under-Drive Ready flag.
+  * @note  These macros can be used only for STM32F42xx/STM3243xx devices.
+  */
+#define __HAL_PWR_CLEAR_ODRUDR_FLAG() (PWR->CSR |= PWR_FLAG_UDRDY)
+
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup PWREx_Exported_Functions PWREx Exported Functions
+  *  @{
+  */
+ 
+/** @addtogroup PWREx_Exported_Functions_Group1
+  * @{
+  */
+void HAL_PWREx_EnableFlashPowerDown(void);
+void HAL_PWREx_DisableFlashPowerDown(void); 
+HAL_StatusTypeDef HAL_PWREx_EnableBkUpReg(void);
+HAL_StatusTypeDef HAL_PWREx_DisableBkUpReg(void); 
+uint32_t HAL_PWREx_GetVoltageRange(void);
+HAL_StatusTypeDef HAL_PWREx_ControlVoltageScaling(uint32_t VoltageScaling);
+
+#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F401xC) ||\
+    defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F412Zx) || defined(STM32F412Vx) ||\
+    defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx)
+void HAL_PWREx_EnableMainRegulatorLowVoltage(void);
+void HAL_PWREx_DisableMainRegulatorLowVoltage(void);
+void HAL_PWREx_EnableLowRegulatorLowVoltage(void);
+void HAL_PWREx_DisableLowRegulatorLowVoltage(void);
+#endif /* STM32F410xx || STM32F401xC || STM32F401xE || STM32F411xE || STM32F412Zx || STM32F412Vx ||\
+          STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx) ||\
+    defined(STM32F469xx) || defined(STM32F479xx)
+HAL_StatusTypeDef HAL_PWREx_EnableOverDrive(void);
+HAL_StatusTypeDef HAL_PWREx_DisableOverDrive(void);
+HAL_StatusTypeDef HAL_PWREx_EnterUnderDriveSTOPMode(uint32_t Regulator, uint8_t STOPEntry);
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup PWREx_Private_Constants PWREx Private Constants
+  * @{
+  */
+
+/** @defgroup PWREx_register_alias_address PWREx Register alias address
+  * @{
+  */
+/* ------------- PWR registers bit address in the alias region ---------------*/
+/* --- CR Register ---*/
+/* Alias word address of FPDS bit */
+#define FPDS_BIT_NUMBER          PWR_CR_FPDS_Pos
+#define CR_FPDS_BB               (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32U) + (FPDS_BIT_NUMBER * 4U))
+
+/* Alias word address of ODEN bit   */
+#define ODEN_BIT_NUMBER          PWR_CR_ODEN_Pos
+#define CR_ODEN_BB               (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32U) + (ODEN_BIT_NUMBER * 4U))
+
+/* Alias word address of ODSWEN bit */
+#define ODSWEN_BIT_NUMBER        PWR_CR_ODSWEN_Pos
+#define CR_ODSWEN_BB             (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32U) + (ODSWEN_BIT_NUMBER * 4U))
+    
+/* Alias word address of MRLVDS bit */
+#define MRLVDS_BIT_NUMBER        PWR_CR_MRLVDS_Pos
+#define CR_MRLVDS_BB             (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32U) + (MRLVDS_BIT_NUMBER * 4U))
+
+/* Alias word address of LPLVDS bit */
+#define LPLVDS_BIT_NUMBER        PWR_CR_LPLVDS_Pos
+#define CR_LPLVDS_BB             (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32U) + (LPLVDS_BIT_NUMBER * 4U))
+
+ /**
+  * @}
+  */
+
+/** @defgroup PWREx_CSR_register_alias PWRx CSR Register alias address
+  * @{
+  */  
+/* --- CSR Register ---*/
+/* Alias word address of BRE bit */
+#define BRE_BIT_NUMBER   PWR_CSR_BRE_Pos
+#define CSR_BRE_BB      (uint32_t)(PERIPH_BB_BASE + (PWR_CSR_OFFSET_BB * 32U) + (BRE_BIT_NUMBER * 4U))
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup PWREx_Private_Macros PWREx Private Macros
+  * @{
+  */
+
+/** @defgroup PWREx_IS_PWR_Definitions PWREx Private macros to check input parameters
+  * @{
+  */
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+    defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
+#define IS_PWR_REGULATOR_UNDERDRIVE(REGULATOR) (((REGULATOR) == PWR_MAINREGULATOR_UNDERDRIVE_ON) || \
+                                                ((REGULATOR) == PWR_LOWPOWERREGULATOR_UNDERDRIVE_ON))
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */
+
+#if defined(STM32F405xx) || defined(STM32F407xx) || defined(STM32F415xx) || defined(STM32F417xx)
+#define IS_PWR_VOLTAGE_SCALING_RANGE(VOLTAGE) (((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE1) || \
+                                               ((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE2))
+#else
+#define IS_PWR_VOLTAGE_SCALING_RANGE(VOLTAGE) (((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE1) || \
+                                               ((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE2) || \
+                                               ((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE3))
+#endif /* STM32F405xx || STM32F407xx || STM32F415xx || STM32F417xx */ 
+
+#if defined(STM32F446xx)
+#define IS_PWR_WAKEUP_PIN(PIN) (((PIN) == PWR_WAKEUP_PIN1) || ((PIN) == PWR_WAKEUP_PIN2))
+#elif defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F412Zx) ||\
+      defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) ||\
+      defined(STM32F423xx)
+#define IS_PWR_WAKEUP_PIN(PIN) (((PIN) == PWR_WAKEUP_PIN1) || ((PIN) == PWR_WAKEUP_PIN2) || \
+                                ((PIN) == PWR_WAKEUP_PIN3))
+#else
+#define IS_PWR_WAKEUP_PIN(PIN) ((PIN) == PWR_WAKEUP_PIN1)
+#endif /* STM32F446xx */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */
+  
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F4xx_HAL_PWR_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

libs/STM32_HAL/include/stm32f4xx/stm32f4xx_hal_tim_ex.h

@@ -0,0 +1,357 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_tim_ex.h
+  * @author  MCD Application Team
+  * @brief   Header file of TIM HAL Extended module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32F4xx_HAL_TIM_EX_H
+#define STM32F4xx_HAL_TIM_EX_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup TIMEx
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup TIMEx_Exported_Types TIM Extended Exported Types
+  * @{
+  */
+
+/**
+  * @brief  TIM Hall sensor Configuration Structure definition
+  */
+
+typedef struct
+{
+  uint32_t IC1Polarity;         /*!< Specifies the active edge of the input signal.
+                                     This parameter can be a value of @ref TIM_Input_Capture_Polarity */
+
+  uint32_t IC1Prescaler;        /*!< Specifies the Input Capture Prescaler.
+                                     This parameter can be a value of @ref TIM_Input_Capture_Prescaler */
+
+  uint32_t IC1Filter;           /*!< Specifies the input capture filter.
+                                     This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+
+  uint32_t Commutation_Delay;   /*!< Specifies the pulse value to be loaded into the Capture Compare Register.
+                                     This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */
+} TIM_HallSensor_InitTypeDef;
+/**
+  * @}
+  */
+/* End of exported types -----------------------------------------------------*/
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup TIMEx_Exported_Constants TIM Extended Exported Constants
+  * @{
+  */
+
+/** @defgroup TIMEx_Remap TIM Extended Remapping
+  * @{
+  */
+#if defined (TIM2)
+#if defined(TIM8)
+#define TIM_TIM2_TIM8_TRGO                     0x00000000U                              /*!< TIM2 ITR1 is connected to TIM8 TRGO */
+#else
+#define TIM_TIM2_ETH_PTP                       TIM_OR_ITR1_RMP_0                        /*!< TIM2 ITR1 is connected to PTP trigger output */
+#endif /*  TIM8 */
+#define TIM_TIM2_USBFS_SOF                     TIM_OR_ITR1_RMP_1                        /*!< TIM2 ITR1 is connected to OTG FS SOF */
+#define TIM_TIM2_USBHS_SOF                     (TIM_OR_ITR1_RMP_1 | TIM_OR_ITR1_RMP_0)  /*!< TIM2 ITR1 is connected to OTG HS SOF */
+#endif /* TIM2 */
+
+#define TIM_TIM5_GPIO                          0x00000000U                              /*!< TIM5 TI4 is connected to GPIO */
+#define TIM_TIM5_LSI                           TIM_OR_TI4_RMP_0                         /*!< TIM5 TI4 is connected to LSI */
+#define TIM_TIM5_LSE                           TIM_OR_TI4_RMP_1                         /*!< TIM5 TI4 is connected to LSE */
+#define TIM_TIM5_RTC                           (TIM_OR_TI4_RMP_1 | TIM_OR_TI4_RMP_0)    /*!< TIM5 TI4 is connected to the RTC wakeup interrupt */
+
+#define TIM_TIM11_GPIO                         0x00000000U                              /*!< TIM11 TI1 is connected to GPIO */
+#define TIM_TIM11_HSE                          TIM_OR_TI1_RMP_1                         /*!< TIM11 TI1 is connected to HSE_RTC clock */
+#if defined(SPDIFRX)
+#define TIM_TIM11_SPDIFRX                      TIM_OR_TI1_RMP_0                         /*!< TIM11 TI1 is connected to SPDIFRX_FRAME_SYNC */
+#endif /* SPDIFRX*/
+
+#if defined(LPTIM_OR_TIM1_ITR2_RMP) && defined(LPTIM_OR_TIM5_ITR1_RMP) && defined(LPTIM_OR_TIM5_ITR1_RMP)
+#define LPTIM_REMAP_MASK                       0x10000000U
+
+#define TIM_TIM9_TIM3_TRGO                     LPTIM_REMAP_MASK                             /*!< TIM9 ITR1 is connected to TIM3 TRGO */
+#define TIM_TIM9_LPTIM                         (LPTIM_REMAP_MASK | LPTIM_OR_TIM9_ITR1_RMP)  /*!< TIM9 ITR1 is connected to LPTIM1 output */
+
+#define TIM_TIM5_TIM3_TRGO                     LPTIM_REMAP_MASK                             /*!< TIM5 ITR1 is connected to TIM3 TRGO */
+#define TIM_TIM5_LPTIM                         (LPTIM_REMAP_MASK | LPTIM_OR_TIM5_ITR1_RMP)  /*!< TIM5 ITR1 is connected to LPTIM1 output */
+
+#define TIM_TIM1_TIM3_TRGO                     LPTIM_REMAP_MASK                             /*!< TIM1 ITR2 is connected to TIM3 TRGO */
+#define TIM_TIM1_LPTIM                         (LPTIM_REMAP_MASK | LPTIM_OR_TIM1_ITR2_RMP)  /*!< TIM1 ITR2 is connected to LPTIM1 output */
+#endif /* LPTIM_OR_TIM1_ITR2_RMP &&  LPTIM_OR_TIM5_ITR1_RMP && LPTIM_OR_TIM5_ITR1_RMP */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+/* End of exported constants -------------------------------------------------*/
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup TIMEx_Exported_Macros TIM Extended Exported Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+/* End of exported macro -----------------------------------------------------*/
+
+/* Private macro -------------------------------------------------------------*/
+/** @defgroup TIMEx_Private_Macros TIM Extended Private Macros
+  * @{
+  */
+#if defined(SPDIFRX)
+#define IS_TIM_REMAP(INSTANCE, TIM_REMAP)                                 \
+  ((((INSTANCE) == TIM2)  && (((TIM_REMAP) == TIM_TIM2_TIM8_TRGO)      || \
+                              ((TIM_REMAP) == TIM_TIM2_USBFS_SOF)      || \
+                              ((TIM_REMAP) == TIM_TIM2_USBHS_SOF)))    || \
+   (((INSTANCE) == TIM5)  && (((TIM_REMAP) == TIM_TIM5_GPIO)           || \
+                              ((TIM_REMAP) == TIM_TIM5_LSI)            || \
+                              ((TIM_REMAP) == TIM_TIM5_LSE)            || \
+                              ((TIM_REMAP) == TIM_TIM5_RTC)))          || \
+   (((INSTANCE) == TIM11) && (((TIM_REMAP) == TIM_TIM11_GPIO)          || \
+                              ((TIM_REMAP) == TIM_TIM11_SPDIFRX)       || \
+                              ((TIM_REMAP) == TIM_TIM11_HSE))))
+#elif defined(TIM2)
+#if defined(LPTIM_OR_TIM1_ITR2_RMP) && defined(LPTIM_OR_TIM5_ITR1_RMP) && defined(LPTIM_OR_TIM5_ITR1_RMP)
+#define IS_TIM_REMAP(INSTANCE, TIM_REMAP)                                 \
+  ((((INSTANCE) == TIM2)  && (((TIM_REMAP) == TIM_TIM2_TIM8_TRGO)      || \
+                              ((TIM_REMAP) == TIM_TIM2_USBFS_SOF)      || \
+                              ((TIM_REMAP) == TIM_TIM2_USBHS_SOF)))    || \
+   (((INSTANCE) == TIM5)  && (((TIM_REMAP) == TIM_TIM5_GPIO)           || \
+                              ((TIM_REMAP) == TIM_TIM5_LSI)            || \
+                              ((TIM_REMAP) == TIM_TIM5_LSE)            || \
+                              ((TIM_REMAP) == TIM_TIM5_RTC)))          || \
+   (((INSTANCE) == TIM11) && (((TIM_REMAP) == TIM_TIM11_GPIO)          || \
+                              ((TIM_REMAP) == TIM_TIM11_HSE)))         || \
+   (((INSTANCE) == TIM1)  && (((TIM_REMAP) == TIM_TIM1_TIM3_TRGO)      || \
+                              ((TIM_REMAP) == TIM_TIM1_LPTIM)))        || \
+   (((INSTANCE) == TIM5)  && (((TIM_REMAP) == TIM_TIM5_TIM3_TRGO)      || \
+                              ((TIM_REMAP) == TIM_TIM5_LPTIM)))        || \
+   (((INSTANCE) == TIM9)  && (((TIM_REMAP) == TIM_TIM9_TIM3_TRGO)      || \
+                              ((TIM_REMAP) == TIM_TIM9_LPTIM))))
+#elif defined(TIM8)
+#define IS_TIM_REMAP(INSTANCE, TIM_REMAP)                                 \
+  ((((INSTANCE) == TIM2)  && (((TIM_REMAP) == TIM_TIM2_TIM8_TRGO)      || \
+                              ((TIM_REMAP) == TIM_TIM2_USBFS_SOF)      || \
+                              ((TIM_REMAP) == TIM_TIM2_USBHS_SOF)))    || \
+   (((INSTANCE) == TIM5)  && (((TIM_REMAP) == TIM_TIM5_GPIO)           || \
+                              ((TIM_REMAP) == TIM_TIM5_LSI)            || \
+                              ((TIM_REMAP) == TIM_TIM5_LSE)            || \
+                              ((TIM_REMAP) == TIM_TIM5_RTC)))          || \
+   (((INSTANCE) == TIM11) && (((TIM_REMAP) == TIM_TIM11_GPIO)          || \
+                              ((TIM_REMAP) == TIM_TIM11_HSE))))
+#else
+#define IS_TIM_REMAP(INSTANCE, TIM_REMAP)                                 \
+  ((((INSTANCE) == TIM2)  && (((TIM_REMAP) == TIM_TIM2_ETH_PTP)        || \
+                              ((TIM_REMAP) == TIM_TIM2_USBFS_SOF)      || \
+                              ((TIM_REMAP) == TIM_TIM2_USBHS_SOF)))    || \
+   (((INSTANCE) == TIM5)  && (((TIM_REMAP) == TIM_TIM5_GPIO)           || \
+                              ((TIM_REMAP) == TIM_TIM5_LSI)            || \
+                              ((TIM_REMAP) == TIM_TIM5_LSE)            || \
+                              ((TIM_REMAP) == TIM_TIM5_RTC)))          || \
+   (((INSTANCE) == TIM11) && (((TIM_REMAP) == TIM_TIM11_GPIO)          || \
+                              ((TIM_REMAP) == TIM_TIM11_HSE))))
+#endif /* LPTIM_OR_TIM1_ITR2_RMP &&  LPTIM_OR_TIM5_ITR1_RMP && LPTIM_OR_TIM5_ITR1_RMP */
+#else
+#define IS_TIM_REMAP(INSTANCE, TIM_REMAP)                                 \
+  ((((INSTANCE) == TIM5)  && (((TIM_REMAP) == TIM_TIM5_GPIO)           || \
+                              ((TIM_REMAP) == TIM_TIM5_LSI)            || \
+                              ((TIM_REMAP) == TIM_TIM5_LSE)            || \
+                              ((TIM_REMAP) == TIM_TIM5_RTC)))          || \
+   (((INSTANCE) == TIM11) && (((TIM_REMAP) == TIM_TIM11_GPIO)          || \
+                              ((TIM_REMAP) == TIM_TIM11_HSE))))
+#endif /* SPDIFRX */
+
+/**
+  * @}
+  */
+/* End of private macro ------------------------------------------------------*/
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup TIMEx_Exported_Functions TIM Extended Exported Functions
+  * @{
+  */
+
+/** @addtogroup TIMEx_Exported_Functions_Group1 Extended Timer Hall Sensor functions
+  *  @brief    Timer Hall Sensor functions
+  * @{
+  */
+/*  Timer Hall Sensor functions  **********************************************/
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Init(TIM_HandleTypeDef *htim, TIM_HallSensor_InitTypeDef *sConfig);
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_DeInit(TIM_HandleTypeDef *htim);
+
+void HAL_TIMEx_HallSensor_MspInit(TIM_HandleTypeDef *htim);
+void HAL_TIMEx_HallSensor_MspDeInit(TIM_HandleTypeDef *htim);
+
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop(TIM_HandleTypeDef *htim);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_IT(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_IT(TIM_HandleTypeDef *htim);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_DMA(TIM_HandleTypeDef *htim);
+/**
+  * @}
+  */
+
+/** @addtogroup TIMEx_Exported_Functions_Group2 Extended Timer Complementary Output Compare functions
+  *  @brief   Timer Complementary Output Compare functions
+  * @{
+  */
+/*  Timer Complementary Output Compare functions  *****************************/
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIMEx_OCN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
+
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
+/**
+  * @}
+  */
+
+/** @addtogroup TIMEx_Exported_Functions_Group3 Extended Timer Complementary PWM functions
+  *  @brief    Timer Complementary PWM functions
+  * @{
+  */
+/*  Timer Complementary PWM functions  ****************************************/
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
+
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
+/**
+  * @}
+  */
+
+/** @addtogroup TIMEx_Exported_Functions_Group4 Extended Timer Complementary One Pulse functions
+  *  @brief    Timer Complementary One Pulse functions
+  * @{
+  */
+/*  Timer Complementary One Pulse functions  **********************************/
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+/**
+  * @}
+  */
+
+/** @addtogroup TIMEx_Exported_Functions_Group5 Extended Peripheral Control functions
+  *  @brief    Peripheral Control functions
+  * @{
+  */
+/* Extended Control functions  ************************************************/
+HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent(TIM_HandleTypeDef *htim, uint32_t  InputTrigger,
+                                              uint32_t  CommutationSource);
+HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent_IT(TIM_HandleTypeDef *htim, uint32_t  InputTrigger,
+                                                 uint32_t  CommutationSource);
+HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent_DMA(TIM_HandleTypeDef *htim, uint32_t  InputTrigger,
+                                                  uint32_t  CommutationSource);
+HAL_StatusTypeDef HAL_TIMEx_MasterConfigSynchronization(TIM_HandleTypeDef *htim,
+                                                        TIM_MasterConfigTypeDef *sMasterConfig);
+HAL_StatusTypeDef HAL_TIMEx_ConfigBreakDeadTime(TIM_HandleTypeDef *htim,
+                                                TIM_BreakDeadTimeConfigTypeDef *sBreakDeadTimeConfig);
+HAL_StatusTypeDef HAL_TIMEx_RemapConfig(TIM_HandleTypeDef *htim, uint32_t Remap);
+/**
+  * @}
+  */
+
+/** @addtogroup TIMEx_Exported_Functions_Group6 Extended Callbacks functions
+  * @brief    Extended Callbacks functions
+  * @{
+  */
+/* Extended Callback **********************************************************/
+void HAL_TIMEx_CommutCallback(TIM_HandleTypeDef *htim);
+void HAL_TIMEx_CommutHalfCpltCallback(TIM_HandleTypeDef *htim);
+void HAL_TIMEx_BreakCallback(TIM_HandleTypeDef *htim);
+/**
+  * @}
+  */
+
+/** @addtogroup TIMEx_Exported_Functions_Group7 Extended Peripheral State functions
+  * @brief    Extended Peripheral State functions
+  * @{
+  */
+/* Extended Peripheral State functions  ***************************************/
+HAL_TIM_StateTypeDef HAL_TIMEx_HallSensor_GetState(TIM_HandleTypeDef *htim);
+HAL_TIM_ChannelStateTypeDef HAL_TIMEx_GetChannelNState(TIM_HandleTypeDef *htim,  uint32_t ChannelN);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+/* End of exported functions -------------------------------------------------*/
+
+/* Private functions----------------------------------------------------------*/
+/** @addtogroup TIMEx_Private_Functions TIMEx Private Functions
+  * @{
+  */
+void TIMEx_DMACommutationCplt(DMA_HandleTypeDef *hdma);
+void TIMEx_DMACommutationHalfCplt(DMA_HandleTypeDef *hdma);
+/**
+  * @}
+  */
+/* End of private functions --------------------------------------------------*/
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* STM32F4xx_HAL_TIM_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

libs/STM32_HAL/include/stm32f4xx/stm32f4xx_ll_usb.h

@@ -0,0 +1,522 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_ll_usb.h
+  * @author  MCD Application Team
+  * @brief   Header file of USB Low Layer HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32F4xx_LL_USB_H
+#define STM32F4xx_LL_USB_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+#if defined (USB_OTG_FS) || defined (USB_OTG_HS)
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup USB_LL
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+
+/**
+  * @brief  USB Mode definition
+  */
+#if defined (USB_OTG_FS) || defined (USB_OTG_HS)
+
+typedef enum
+{
+  USB_DEVICE_MODE  = 0,
+  USB_HOST_MODE    = 1,
+  USB_DRD_MODE     = 2
+} USB_OTG_ModeTypeDef;
+
+/**
+  * @brief  URB States definition
+  */
+typedef enum
+{
+  URB_IDLE = 0,
+  URB_DONE,
+  URB_NOTREADY,
+  URB_NYET,
+  URB_ERROR,
+  URB_STALL
+} USB_OTG_URBStateTypeDef;
+
+/**
+  * @brief  Host channel States  definition
+  */
+typedef enum
+{
+  HC_IDLE = 0,
+  HC_XFRC,
+  HC_HALTED,
+  HC_NAK,
+  HC_NYET,
+  HC_STALL,
+  HC_XACTERR,
+  HC_BBLERR,
+  HC_DATATGLERR
+} USB_OTG_HCStateTypeDef;
+
+/**
+  * @brief  USB Instance Initialization Structure definition
+  */
+typedef struct
+{
+  uint32_t dev_endpoints;           /*!< Device Endpoints number.
+                                         This parameter depends on the used USB core.
+                                         This parameter must be a number between Min_Data = 1 and Max_Data = 15 */
+
+  uint32_t Host_channels;           /*!< Host Channels number.
+                                         This parameter Depends on the used USB core.
+                                         This parameter must be a number between Min_Data = 1 and Max_Data = 15 */
+
+  uint32_t speed;                   /*!< USB Core speed.
+                                         This parameter can be any value of @ref PCD_Speed/HCD_Speed
+                                                                                 (HCD_SPEED_xxx, HCD_SPEED_xxx) */
+
+  uint32_t dma_enable;              /*!< Enable or disable of the USB embedded DMA used only for OTG HS.        */
+
+  uint32_t ep0_mps;                 /*!< Set the Endpoint 0 Max Packet size.                                    */
+
+  uint32_t phy_itface;              /*!< Select the used PHY interface.
+                                         This parameter can be any value of @ref PCD_PHY_Module/HCD_PHY_Module  */
+
+  uint32_t Sof_enable;              /*!< Enable or disable the output of the SOF signal.                        */
+
+  uint32_t low_power_enable;        /*!< Enable or disable the low power mode.                                  */
+
+  uint32_t lpm_enable;              /*!< Enable or disable Link Power Management.                               */
+
+  uint32_t battery_charging_enable; /*!< Enable or disable Battery charging.                                    */
+
+  uint32_t vbus_sensing_enable;     /*!< Enable or disable the VBUS Sensing feature.                            */
+
+  uint32_t use_dedicated_ep1;       /*!< Enable or disable the use of the dedicated EP1 interrupt.              */
+
+  uint32_t use_external_vbus;       /*!< Enable or disable the use of the external VBUS.                        */
+
+} USB_OTG_CfgTypeDef;
+
+typedef struct
+{
+  uint8_t   num;                  /*!< Endpoint number
+                                       This parameter must be a number between Min_Data = 1 and Max_Data = 15   */
+
+  uint8_t   is_in;                /*!< Endpoint direction
+                                       This parameter must be a number between Min_Data = 0 and Max_Data = 1    */
+
+  uint8_t   is_stall;             /*!< Endpoint stall condition
+                                       This parameter must be a number between Min_Data = 0 and Max_Data = 1    */
+
+  uint8_t   type;                 /*!< Endpoint type
+                                       This parameter can be any value of @ref USB_LL_EP_Type                   */
+
+  uint8_t   data_pid_start;       /*!< Initial data PID
+                                       This parameter must be a number between Min_Data = 0 and Max_Data = 1    */
+
+  uint8_t   even_odd_frame;       /*!< IFrame parity
+                                       This parameter must be a number between Min_Data = 0 and Max_Data = 1    */
+
+  uint16_t  tx_fifo_num;          /*!< Transmission FIFO number
+                                       This parameter must be a number between Min_Data = 1 and Max_Data = 15   */
+
+  uint32_t  maxpacket;            /*!< Endpoint Max packet size
+                                       This parameter must be a number between Min_Data = 0 and Max_Data = 64KB */
+
+  uint8_t   *xfer_buff;           /*!< Pointer to transfer buffer                                               */
+
+  uint32_t  dma_addr;             /*!< 32 bits aligned transfer buffer address                                  */
+
+  uint32_t  xfer_len;             /*!< Current transfer length                                                  */
+
+  uint32_t  xfer_count;           /*!< Partial transfer length in case of multi packet transfer                 */
+} USB_OTG_EPTypeDef;
+
+typedef struct
+{
+  uint8_t   dev_addr;           /*!< USB device address.
+                                     This parameter must be a number between Min_Data = 1 and Max_Data = 255    */
+
+  uint8_t   ch_num;             /*!< Host channel number.
+                                     This parameter must be a number between Min_Data = 1 and Max_Data = 15     */
+
+  uint8_t   ep_num;             /*!< Endpoint number.
+                                     This parameter must be a number between Min_Data = 1 and Max_Data = 15     */
+
+  uint8_t   ep_is_in;           /*!< Endpoint direction
+                                     This parameter must be a number between Min_Data = 0 and Max_Data = 1      */
+
+  uint8_t   speed;              /*!< USB Host Channel speed.
+                                     This parameter can be any value of @ref HCD_Device_Speed:
+                                                                             (HCD_DEVICE_SPEED_xxx)             */
+
+  uint8_t   do_ping;            /*!< Enable or disable the use of the PING protocol for HS mode.                */
+
+  uint8_t   process_ping;       /*!< Execute the PING protocol for HS mode.                                     */
+
+  uint8_t   ep_type;            /*!< Endpoint Type.
+                                     This parameter can be any value of @ref USB_LL_EP_Type                     */
+
+  uint16_t  max_packet;         /*!< Endpoint Max packet size.
+                                     This parameter must be a number between Min_Data = 0 and Max_Data = 64KB   */
+
+  uint8_t   data_pid;           /*!< Initial data PID.
+                                     This parameter must be a number between Min_Data = 0 and Max_Data = 1      */
+
+  uint8_t   *xfer_buff;         /*!< Pointer to transfer buffer.                                                */
+
+  uint32_t  XferSize;             /*!< OTG Channel transfer size.                                                   */
+
+  uint32_t  xfer_len;           /*!< Current transfer length.                                                   */
+
+  uint32_t  xfer_count;         /*!< Partial transfer length in case of multi packet transfer.                  */
+
+  uint8_t   toggle_in;          /*!< IN transfer current toggle flag.
+                                     This parameter must be a number between Min_Data = 0 and Max_Data = 1      */
+
+  uint8_t   toggle_out;         /*!< OUT transfer current toggle flag
+                                     This parameter must be a number between Min_Data = 0 and Max_Data = 1      */
+
+  uint32_t  dma_addr;           /*!< 32 bits aligned transfer buffer address.                                   */
+
+  uint32_t  ErrCnt;             /*!< Host channel error count.                                                  */
+
+  USB_OTG_URBStateTypeDef urb_state;  /*!< URB state.
+                                            This parameter can be any value of @ref USB_OTG_URBStateTypeDef */
+
+  USB_OTG_HCStateTypeDef state;       /*!< Host Channel state.
+                                            This parameter can be any value of @ref USB_OTG_HCStateTypeDef  */
+} USB_OTG_HCTypeDef;
+#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */
+
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup PCD_Exported_Constants PCD Exported Constants
+  * @{
+  */
+
+#if defined (USB_OTG_FS) || defined (USB_OTG_HS)
+/** @defgroup USB_OTG_CORE VERSION ID
+  * @{
+  */
+#define USB_OTG_CORE_ID_300A          0x4F54300AU
+#define USB_OTG_CORE_ID_310A          0x4F54310AU
+/**
+  * @}
+  */
+
+/** @defgroup USB_Core_Mode_ USB Core Mode
+  * @{
+  */
+#define USB_OTG_MODE_DEVICE                    0U
+#define USB_OTG_MODE_HOST                      1U
+#define USB_OTG_MODE_DRD                       2U
+/**
+  * @}
+  */
+
+/** @defgroup USB_LL Device Speed
+  * @{
+  */
+#define USBD_HS_SPEED                          0U
+#define USBD_HSINFS_SPEED                      1U
+#define USBH_HS_SPEED                          0U
+#define USBD_FS_SPEED                          2U
+#define USBH_FSLS_SPEED                        1U
+/**
+  * @}
+  */
+
+/** @defgroup USB_LL_Core_Speed USB Low Layer Core Speed
+  * @{
+  */
+#define USB_OTG_SPEED_HIGH                     0U
+#define USB_OTG_SPEED_HIGH_IN_FULL             1U
+#define USB_OTG_SPEED_FULL                     3U
+/**
+  * @}
+  */
+
+/** @defgroup USB_LL_Core_PHY USB Low Layer Core PHY
+  * @{
+  */
+#define USB_OTG_ULPI_PHY                       1U
+#define USB_OTG_EMBEDDED_PHY                   2U
+/**
+  * @}
+  */
+
+/** @defgroup USB_LL_Turnaround_Timeout Turnaround Timeout Value
+  * @{
+  */
+#ifndef USBD_HS_TRDT_VALUE
+#define USBD_HS_TRDT_VALUE                     9U
+#endif /* USBD_HS_TRDT_VALUE */
+#ifndef USBD_FS_TRDT_VALUE
+#define USBD_FS_TRDT_VALUE                     5U
+#define USBD_DEFAULT_TRDT_VALUE                9U
+#endif /* USBD_HS_TRDT_VALUE */
+/**
+  * @}
+  */
+
+/** @defgroup USB_LL_Core_MPS USB Low Layer Core MPS
+  * @{
+  */
+#define USB_OTG_HS_MAX_PACKET_SIZE           512U
+#define USB_OTG_FS_MAX_PACKET_SIZE            64U
+#define USB_OTG_MAX_EP0_SIZE                  64U
+/**
+  * @}
+  */
+
+/** @defgroup USB_LL_Core_PHY_Frequency USB Low Layer Core PHY Frequency
+  * @{
+  */
+#define DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ     (0U << 1)
+#define DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ     (1U << 1)
+#define DSTS_ENUMSPD_FS_PHY_48MHZ              (3U << 1)
+/**
+  * @}
+  */
+
+/** @defgroup USB_LL_CORE_Frame_Interval USB Low Layer Core Frame Interval
+  * @{
+  */
+#define DCFG_FRAME_INTERVAL_80                 0U
+#define DCFG_FRAME_INTERVAL_85                 1U
+#define DCFG_FRAME_INTERVAL_90                 2U
+#define DCFG_FRAME_INTERVAL_95                 3U
+/**
+  * @}
+  */
+
+/** @defgroup USB_LL_EP0_MPS USB Low Layer EP0 MPS
+  * @{
+  */
+#define EP_MPS_64                        0U
+#define EP_MPS_32                        1U
+#define EP_MPS_16                        2U
+#define EP_MPS_8                         3U
+/**
+  * @}
+  */
+
+/** @defgroup USB_LL_EP_Speed USB Low Layer EP Speed
+  * @{
+  */
+#define EP_SPEED_LOW                           0U
+#define EP_SPEED_FULL                          1U
+#define EP_SPEED_HIGH                          2U
+/**
+  * @}
+  */
+
+/** @defgroup USB_LL_EP_Type USB Low Layer EP Type
+  * @{
+  */
+#define EP_TYPE_CTRL                           0U
+#define EP_TYPE_ISOC                           1U
+#define EP_TYPE_BULK                           2U
+#define EP_TYPE_INTR                           3U
+#define EP_TYPE_MSK                            3U
+/**
+  * @}
+  */
+
+/** @defgroup USB_LL_STS_Defines USB Low Layer STS Defines
+  * @{
+  */
+#define STS_GOUT_NAK                           1U
+#define STS_DATA_UPDT                          2U
+#define STS_XFER_COMP                          3U
+#define STS_SETUP_COMP                         4U
+#define STS_SETUP_UPDT                         6U
+/**
+  * @}
+  */
+
+/** @defgroup USB_LL_HCFG_SPEED_Defines USB Low Layer HCFG Speed Defines
+  * @{
+  */
+#define HCFG_30_60_MHZ                         0U
+#define HCFG_48_MHZ                            1U
+#define HCFG_6_MHZ                             2U
+/**
+  * @}
+  */
+
+/** @defgroup USB_LL_HPRT0_PRTSPD_SPEED_Defines USB Low Layer HPRT0 PRTSPD Speed Defines
+  * @{
+  */
+#define HPRT0_PRTSPD_HIGH_SPEED                0U
+#define HPRT0_PRTSPD_FULL_SPEED                1U
+#define HPRT0_PRTSPD_LOW_SPEED                 2U
+/**
+  * @}
+  */
+
+#define HCCHAR_CTRL                            0U
+#define HCCHAR_ISOC                            1U
+#define HCCHAR_BULK                            2U
+#define HCCHAR_INTR                            3U
+
+#define HC_PID_DATA0                           0U
+#define HC_PID_DATA2                           1U
+#define HC_PID_DATA1                           2U
+#define HC_PID_SETUP                           3U
+
+#define GRXSTS_PKTSTS_IN                       2U
+#define GRXSTS_PKTSTS_IN_XFER_COMP             3U
+#define GRXSTS_PKTSTS_DATA_TOGGLE_ERR          5U
+#define GRXSTS_PKTSTS_CH_HALTED                7U
+
+#define USBx_PCGCCTL    *(__IO uint32_t *)((uint32_t)USBx_BASE + USB_OTG_PCGCCTL_BASE)
+#define USBx_HPRT0      *(__IO uint32_t *)((uint32_t)USBx_BASE + USB_OTG_HOST_PORT_BASE)
+
+#define USBx_DEVICE     ((USB_OTG_DeviceTypeDef *)(USBx_BASE + USB_OTG_DEVICE_BASE))
+#define USBx_INEP(i)    ((USB_OTG_INEndpointTypeDef *)(USBx_BASE\
+                                                       + USB_OTG_IN_ENDPOINT_BASE + ((i) * USB_OTG_EP_REG_SIZE)))
+
+#define USBx_OUTEP(i)   ((USB_OTG_OUTEndpointTypeDef *)(USBx_BASE\
+                                                        + USB_OTG_OUT_ENDPOINT_BASE + ((i) * USB_OTG_EP_REG_SIZE)))
+
+#define USBx_DFIFO(i)   *(__IO uint32_t *)(USBx_BASE + USB_OTG_FIFO_BASE + ((i) * USB_OTG_FIFO_SIZE))
+
+#define USBx_HOST       ((USB_OTG_HostTypeDef *)(USBx_BASE + USB_OTG_HOST_BASE))
+#define USBx_HC(i)      ((USB_OTG_HostChannelTypeDef *)(USBx_BASE\
+                                                        + USB_OTG_HOST_CHANNEL_BASE\
+                                                        + ((i) * USB_OTG_HOST_CHANNEL_SIZE)))
+
+#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */
+
+#define EP_ADDR_MSK                            0xFU
+/**
+  * @}
+  */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup USB_LL_Exported_Macros USB Low Layer Exported Macros
+  * @{
+  */
+#if defined (USB_OTG_FS) || defined (USB_OTG_HS)
+#define USB_MASK_INTERRUPT(__INSTANCE__, __INTERRUPT__)     ((__INSTANCE__)->GINTMSK &= ~(__INTERRUPT__))
+#define USB_UNMASK_INTERRUPT(__INSTANCE__, __INTERRUPT__)   ((__INSTANCE__)->GINTMSK |= (__INTERRUPT__))
+
+#define CLEAR_IN_EP_INTR(__EPNUM__, __INTERRUPT__)          (USBx_INEP(__EPNUM__)->DIEPINT = (__INTERRUPT__))
+#define CLEAR_OUT_EP_INTR(__EPNUM__, __INTERRUPT__)         (USBx_OUTEP(__EPNUM__)->DOEPINT = (__INTERRUPT__))
+#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup USB_LL_Exported_Functions USB Low Layer Exported Functions
+  * @{
+  */
+#if defined (USB_OTG_FS) || defined (USB_OTG_HS)
+HAL_StatusTypeDef USB_CoreInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cfg);
+HAL_StatusTypeDef USB_DevInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cfg);
+HAL_StatusTypeDef USB_EnableGlobalInt(USB_OTG_GlobalTypeDef *USBx);
+HAL_StatusTypeDef USB_DisableGlobalInt(USB_OTG_GlobalTypeDef *USBx);
+HAL_StatusTypeDef USB_SetTurnaroundTime(USB_OTG_GlobalTypeDef *USBx, uint32_t hclk, uint8_t speed);
+HAL_StatusTypeDef USB_SetCurrentMode(USB_OTG_GlobalTypeDef *USBx, USB_OTG_ModeTypeDef mode);
+HAL_StatusTypeDef USB_SetDevSpeed(USB_OTG_GlobalTypeDef *USBx, uint8_t speed);
+HAL_StatusTypeDef USB_FlushRxFifo(USB_OTG_GlobalTypeDef *USBx);
+HAL_StatusTypeDef USB_FlushTxFifo(USB_OTG_GlobalTypeDef *USBx, uint32_t num);
+HAL_StatusTypeDef USB_ActivateEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep);
+HAL_StatusTypeDef USB_DeactivateEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep);
+HAL_StatusTypeDef USB_ActivateDedicatedEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep);
+HAL_StatusTypeDef USB_DeactivateDedicatedEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep);
+HAL_StatusTypeDef USB_EPStartXfer(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep, uint8_t dma);
+HAL_StatusTypeDef USB_EP0StartXfer(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep, uint8_t dma);
+HAL_StatusTypeDef USB_WritePacket(USB_OTG_GlobalTypeDef *USBx, uint8_t *src,
+                                  uint8_t ch_ep_num, uint16_t len, uint8_t dma);
+
+void             *USB_ReadPacket(USB_OTG_GlobalTypeDef *USBx, uint8_t *dest, uint16_t len);
+HAL_StatusTypeDef USB_EPSetStall(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep);
+HAL_StatusTypeDef USB_EPClearStall(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep);
+HAL_StatusTypeDef USB_SetDevAddress(USB_OTG_GlobalTypeDef *USBx, uint8_t address);
+HAL_StatusTypeDef USB_DevConnect(USB_OTG_GlobalTypeDef *USBx);
+HAL_StatusTypeDef USB_DevDisconnect(USB_OTG_GlobalTypeDef *USBx);
+HAL_StatusTypeDef USB_StopDevice(USB_OTG_GlobalTypeDef *USBx);
+HAL_StatusTypeDef USB_ActivateSetup(USB_OTG_GlobalTypeDef *USBx);
+HAL_StatusTypeDef USB_EP0_OutStart(USB_OTG_GlobalTypeDef *USBx, uint8_t dma, uint8_t *psetup);
+uint8_t           USB_GetDevSpeed(USB_OTG_GlobalTypeDef *USBx);
+uint32_t          USB_GetMode(USB_OTG_GlobalTypeDef *USBx);
+uint32_t          USB_ReadInterrupts(USB_OTG_GlobalTypeDef *USBx);
+uint32_t          USB_ReadDevAllOutEpInterrupt(USB_OTG_GlobalTypeDef *USBx);
+uint32_t          USB_ReadDevOutEPInterrupt(USB_OTG_GlobalTypeDef *USBx, uint8_t epnum);
+uint32_t          USB_ReadDevAllInEpInterrupt(USB_OTG_GlobalTypeDef *USBx);
+uint32_t          USB_ReadDevInEPInterrupt(USB_OTG_GlobalTypeDef *USBx, uint8_t epnum);
+void              USB_ClearInterrupts(USB_OTG_GlobalTypeDef *USBx, uint32_t interrupt);
+
+HAL_StatusTypeDef USB_HostInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cfg);
+HAL_StatusTypeDef USB_InitFSLSPClkSel(USB_OTG_GlobalTypeDef *USBx, uint8_t freq);
+HAL_StatusTypeDef USB_ResetPort(USB_OTG_GlobalTypeDef *USBx);
+HAL_StatusTypeDef USB_DriveVbus(USB_OTG_GlobalTypeDef *USBx, uint8_t state);
+uint32_t          USB_GetHostSpeed(USB_OTG_GlobalTypeDef *USBx);
+uint32_t          USB_GetCurrentFrame(USB_OTG_GlobalTypeDef *USBx);
+HAL_StatusTypeDef USB_HC_Init(USB_OTG_GlobalTypeDef *USBx, uint8_t ch_num,
+                              uint8_t epnum, uint8_t dev_address, uint8_t speed,
+                              uint8_t ep_type, uint16_t mps);
+HAL_StatusTypeDef USB_HC_StartXfer(USB_OTG_GlobalTypeDef *USBx,
+                                   USB_OTG_HCTypeDef *hc, uint8_t dma);
+
+uint32_t          USB_HC_ReadInterrupt(USB_OTG_GlobalTypeDef *USBx);
+HAL_StatusTypeDef USB_HC_Halt(USB_OTG_GlobalTypeDef *USBx, uint8_t hc_num);
+HAL_StatusTypeDef USB_DoPing(USB_OTG_GlobalTypeDef *USBx, uint8_t ch_num);
+HAL_StatusTypeDef USB_StopHost(USB_OTG_GlobalTypeDef *USBx);
+HAL_StatusTypeDef USB_ActivateRemoteWakeup(USB_OTG_GlobalTypeDef *USBx);
+HAL_StatusTypeDef USB_DeActivateRemoteWakeup(USB_OTG_GlobalTypeDef *USBx);
+#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* STM32F4xx_LL_USB_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

libs/STM32_HAL/src/cmsis/system_stm32f4xx.c

@@ -0,0 +1,749 @@
+/**
+  ******************************************************************************
+  * @file    system_stm32f4xx.c
+  * @author  MCD Application Team
+  * @brief   CMSIS Cortex-M4 Device Peripheral Access Layer System Source File.
+  *
+  *   This file provides two functions and one global variable to be called from 
+  *   user application:
+  *      - SystemInit(): This function is called at startup just after reset and 
+  *                      before branch to main program. This call is made inside
+  *                      the "startup_stm32f4xx.s" file.
+  *
+  *      - SystemCoreClock variable: Contains the core clock (HCLK), it can be used
+  *                                  by the user application to setup the SysTick 
+  *                                  timer or configure other parameters.
+  *                                     
+  *      - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must
+  *                                 be called whenever the core clock is changed
+  *                                 during program execution.
+  *
+  *
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/** @addtogroup CMSIS
+  * @{
+  */
+
+/** @addtogroup stm32f4xx_system
+  * @{
+  */  
+  
+/** @addtogroup STM32F4xx_System_Private_Includes
+  * @{
+  */
+
+
+#include "stm32f4xx.h"
+
+#if !defined  (HSE_VALUE) 
+  #define HSE_VALUE    ((uint32_t)25000000) /*!< Default value of the External oscillator in Hz */
+#endif /* HSE_VALUE */
+
+#if !defined  (HSI_VALUE)
+  #define HSI_VALUE    ((uint32_t)16000000) /*!< Value of the Internal oscillator in Hz*/
+#endif /* HSI_VALUE */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F4xx_System_Private_TypesDefinitions
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F4xx_System_Private_Defines
+  * @{
+  */
+
+/************************* Miscellaneous Configuration ************************/
+/*!< Uncomment the following line if you need to use external SRAM or SDRAM as data memory  */
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx)\
+ || defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\
+ || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx)
+/* #define DATA_IN_ExtSRAM */
+#endif /* STM32F40xxx || STM32F41xxx || STM32F42xxx || STM32F43xxx || STM32F469xx || STM32F479xx ||\
+          STM32F412Zx || STM32F412Vx */
+ 
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\
+ || defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
+/* #define DATA_IN_ExtSDRAM */
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx ||\
+          STM32F479xx */
+
+/* Note: Following vector table addresses must be defined in line with linker
+         configuration. */
+/*!< Uncomment the following line if you need to relocate the vector table
+     anywhere in Flash or Sram, else the vector table is kept at the automatic
+     remap of boot address selected */
+/* #define USER_VECT_TAB_ADDRESS */
+
+#if defined(USER_VECT_TAB_ADDRESS)
+/*!< Uncomment the following line if you need to relocate your vector Table
+     in Sram else user remap will be done in Flash. */
+/* #define VECT_TAB_SRAM */
+#if defined(VECT_TAB_SRAM)
+#define VECT_TAB_BASE_ADDRESS   SRAM_BASE       /*!< Vector Table base address field.
+                                                     This value must be a multiple of 0x200. */
+#define VECT_TAB_OFFSET         0x00000000U     /*!< Vector Table base offset field.
+                                                     This value must be a multiple of 0x200. */
+#else
+#define VECT_TAB_BASE_ADDRESS   FLASH_BASE      /*!< Vector Table base address field.
+                                                     This value must be a multiple of 0x200. */
+#define VECT_TAB_OFFSET         0x00000000U     /*!< Vector Table base offset field.
+                                                     This value must be a multiple of 0x200. */
+#endif /* VECT_TAB_SRAM */
+#endif /* USER_VECT_TAB_ADDRESS */
+/******************************************************************************/
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F4xx_System_Private_Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F4xx_System_Private_Variables
+  * @{
+  */
+  /* This variable is updated in three ways:
+      1) by calling CMSIS function SystemCoreClockUpdate()
+      2) by calling HAL API function HAL_RCC_GetHCLKFreq()
+      3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency 
+         Note: If you use this function to configure the system clock; then there
+               is no need to call the 2 first functions listed above, since SystemCoreClock
+               variable is updated automatically.
+  */
+uint32_t SystemCoreClock = 16000000;
+const uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9};
+const uint8_t APBPrescTable[8]  = {0, 0, 0, 0, 1, 2, 3, 4};
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F4xx_System_Private_FunctionPrototypes
+  * @{
+  */
+
+#if defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM)
+  static void SystemInit_ExtMemCtl(void); 
+#endif /* DATA_IN_ExtSRAM || DATA_IN_ExtSDRAM */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F4xx_System_Private_Functions
+  * @{
+  */
+
+/**
+  * @brief  Setup the microcontroller system
+  *         Initialize the FPU setting, vector table location and External memory 
+  *         configuration.
+  * @param  None
+  * @retval None
+  */
+void SystemInit(void)
+{
+  /* FPU settings ------------------------------------------------------------*/
+  #if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+    SCB->CPACR |= ((3UL << 10*2)|(3UL << 11*2));  /* set CP10 and CP11 Full Access */
+  #endif
+
+#if defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM)
+  SystemInit_ExtMemCtl(); 
+#endif /* DATA_IN_ExtSRAM || DATA_IN_ExtSDRAM */
+
+  /* Configure the Vector Table location -------------------------------------*/
+#if defined(USER_VECT_TAB_ADDRESS)
+  SCB->VTOR = VECT_TAB_BASE_ADDRESS | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM */
+#endif /* USER_VECT_TAB_ADDRESS */
+}
+
+/**
+   * @brief  Update SystemCoreClock variable according to Clock Register Values.
+  *         The SystemCoreClock variable contains the core clock (HCLK), it can
+  *         be used by the user application to setup the SysTick timer or configure
+  *         other parameters.
+  *           
+  * @note   Each time the core clock (HCLK) changes, this function must be called
+  *         to update SystemCoreClock variable value. Otherwise, any configuration
+  *         based on this variable will be incorrect.         
+  *     
+  * @note   - The system frequency computed by this function is not the real 
+  *           frequency in the chip. It is calculated based on the predefined 
+  *           constant and the selected clock source:
+  *             
+  *           - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*)
+  *                                              
+  *           - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**)
+  *                          
+  *           - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**) 
+  *             or HSI_VALUE(*) multiplied/divided by the PLL factors.
+  *         
+  *         (*) HSI_VALUE is a constant defined in stm32f4xx_hal_conf.h file (default value
+  *             16 MHz) but the real value may vary depending on the variations
+  *             in voltage and temperature.   
+  *    
+  *         (**) HSE_VALUE is a constant defined in stm32f4xx_hal_conf.h file (its value
+  *              depends on the application requirements), user has to ensure that HSE_VALUE
+  *              is same as the real frequency of the crystal used. Otherwise, this function
+  *              may have wrong result.
+  *                
+  *         - The result of this function could be not correct when using fractional
+  *           value for HSE crystal.
+  *     
+  * @param  None
+  * @retval None
+  */
+void SystemCoreClockUpdate(void)
+{
+  uint32_t tmp = 0, pllvco = 0, pllp = 2, pllsource = 0, pllm = 2;
+  
+  /* Get SYSCLK source -------------------------------------------------------*/
+  tmp = RCC->CFGR & RCC_CFGR_SWS;
+
+  switch (tmp)
+  {
+    case 0x00:  /* HSI used as system clock source */
+      SystemCoreClock = HSI_VALUE;
+      break;
+    case 0x04:  /* HSE used as system clock source */
+      SystemCoreClock = HSE_VALUE;
+      break;
+    case 0x08:  /* PLL used as system clock source */
+
+      /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLL_M) * PLL_N
+         SYSCLK = PLL_VCO / PLL_P
+         */    
+      pllsource = (RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) >> 22;
+      pllm = RCC->PLLCFGR & RCC_PLLCFGR_PLLM;
+      
+      if (pllsource != 0)
+      {
+        /* HSE used as PLL clock source */
+        pllvco = (HSE_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6);
+      }
+      else
+      {
+        /* HSI used as PLL clock source */
+        pllvco = (HSI_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6);
+      }
+
+      pllp = (((RCC->PLLCFGR & RCC_PLLCFGR_PLLP) >>16) + 1 ) *2;
+      SystemCoreClock = pllvco/pllp;
+      break;
+    default:
+      SystemCoreClock = HSI_VALUE;
+      break;
+  }
+  /* Compute HCLK frequency --------------------------------------------------*/
+  /* Get HCLK prescaler */
+  tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4)];
+  /* HCLK frequency */
+  SystemCoreClock >>= tmp;
+}
+
+#if defined (DATA_IN_ExtSRAM) && defined (DATA_IN_ExtSDRAM)
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\
+ || defined(STM32F469xx) || defined(STM32F479xx)
+/**
+  * @brief  Setup the external memory controller.
+  *         Called in startup_stm32f4xx.s before jump to main.
+  *         This function configures the external memories (SRAM/SDRAM)
+  *         This SRAM/SDRAM will be used as program data memory (including heap and stack).
+  * @param  None
+  * @retval None
+  */
+void SystemInit_ExtMemCtl(void)
+{
+  __IO uint32_t tmp = 0x00;
+
+  register uint32_t tmpreg = 0, timeout = 0xFFFF;
+  register __IO uint32_t index;
+
+  /* Enable GPIOC, GPIOD, GPIOE, GPIOF, GPIOG, GPIOH and GPIOI interface clock */
+  RCC->AHB1ENR |= 0x000001F8;
+
+  /* Delay after an RCC peripheral clock enabling */
+  tmp = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOCEN);
+  
+  /* Connect PDx pins to FMC Alternate function */
+  GPIOD->AFR[0]  = 0x00CCC0CC;
+  GPIOD->AFR[1]  = 0xCCCCCCCC;
+  /* Configure PDx pins in Alternate function mode */  
+  GPIOD->MODER   = 0xAAAA0A8A;
+  /* Configure PDx pins speed to 100 MHz */  
+  GPIOD->OSPEEDR = 0xFFFF0FCF;
+  /* Configure PDx pins Output type to push-pull */  
+  GPIOD->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PDx pins */ 
+  GPIOD->PUPDR   = 0x00000000;
+
+  /* Connect PEx pins to FMC Alternate function */
+  GPIOE->AFR[0]  = 0xC00CC0CC;
+  GPIOE->AFR[1]  = 0xCCCCCCCC;
+  /* Configure PEx pins in Alternate function mode */ 
+  GPIOE->MODER   = 0xAAAA828A;
+  /* Configure PEx pins speed to 100 MHz */ 
+  GPIOE->OSPEEDR = 0xFFFFC3CF;
+  /* Configure PEx pins Output type to push-pull */  
+  GPIOE->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PEx pins */ 
+  GPIOE->PUPDR   = 0x00000000;
+  
+  /* Connect PFx pins to FMC Alternate function */
+  GPIOF->AFR[0]  = 0xCCCCCCCC;
+  GPIOF->AFR[1]  = 0xCCCCCCCC;
+  /* Configure PFx pins in Alternate function mode */   
+  GPIOF->MODER   = 0xAA800AAA;
+  /* Configure PFx pins speed to 50 MHz */ 
+  GPIOF->OSPEEDR = 0xAA800AAA;
+  /* Configure PFx pins Output type to push-pull */  
+  GPIOF->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PFx pins */ 
+  GPIOF->PUPDR   = 0x00000000;
+
+  /* Connect PGx pins to FMC Alternate function */
+  GPIOG->AFR[0]  = 0xCCCCCCCC;
+  GPIOG->AFR[1]  = 0xCCCCCCCC;
+  /* Configure PGx pins in Alternate function mode */ 
+  GPIOG->MODER   = 0xAAAAAAAA;
+  /* Configure PGx pins speed to 50 MHz */ 
+  GPIOG->OSPEEDR = 0xAAAAAAAA;
+  /* Configure PGx pins Output type to push-pull */  
+  GPIOG->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PGx pins */ 
+  GPIOG->PUPDR   = 0x00000000;
+  
+  /* Connect PHx pins to FMC Alternate function */
+  GPIOH->AFR[0]  = 0x00C0CC00;
+  GPIOH->AFR[1]  = 0xCCCCCCCC;
+  /* Configure PHx pins in Alternate function mode */ 
+  GPIOH->MODER   = 0xAAAA08A0;
+  /* Configure PHx pins speed to 50 MHz */ 
+  GPIOH->OSPEEDR = 0xAAAA08A0;
+  /* Configure PHx pins Output type to push-pull */  
+  GPIOH->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PHx pins */ 
+  GPIOH->PUPDR   = 0x00000000;
+  
+  /* Connect PIx pins to FMC Alternate function */
+  GPIOI->AFR[0]  = 0xCCCCCCCC;
+  GPIOI->AFR[1]  = 0x00000CC0;
+  /* Configure PIx pins in Alternate function mode */ 
+  GPIOI->MODER   = 0x0028AAAA;
+  /* Configure PIx pins speed to 50 MHz */ 
+  GPIOI->OSPEEDR = 0x0028AAAA;
+  /* Configure PIx pins Output type to push-pull */  
+  GPIOI->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PIx pins */ 
+  GPIOI->PUPDR   = 0x00000000;
+  
+/*-- FMC Configuration -------------------------------------------------------*/
+  /* Enable the FMC interface clock */
+  RCC->AHB3ENR |= 0x00000001;
+  /* Delay after an RCC peripheral clock enabling */
+  tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);
+
+  FMC_Bank5_6->SDCR[0] = 0x000019E4;
+  FMC_Bank5_6->SDTR[0] = 0x01115351;      
+  
+  /* SDRAM initialization sequence */
+  /* Clock enable command */
+  FMC_Bank5_6->SDCMR = 0x00000011; 
+  tmpreg = FMC_Bank5_6->SDSR & 0x00000020; 
+  while((tmpreg != 0) && (timeout-- > 0))
+  {
+    tmpreg = FMC_Bank5_6->SDSR & 0x00000020; 
+  }
+
+  /* Delay */
+  for (index = 0; index<1000; index++);
+  
+  /* PALL command */
+  FMC_Bank5_6->SDCMR = 0x00000012;           
+  tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
+  timeout = 0xFFFF;
+  while((tmpreg != 0) && (timeout-- > 0))
+  {
+    tmpreg = FMC_Bank5_6->SDSR & 0x00000020; 
+  }
+  
+  /* Auto refresh command */
+  FMC_Bank5_6->SDCMR = 0x00000073;
+  tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
+  timeout = 0xFFFF;
+  while((tmpreg != 0) && (timeout-- > 0))
+  {
+    tmpreg = FMC_Bank5_6->SDSR & 0x00000020; 
+  }
+ 
+  /* MRD register program */
+  FMC_Bank5_6->SDCMR = 0x00046014;
+  tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
+  timeout = 0xFFFF;
+  while((tmpreg != 0) && (timeout-- > 0))
+  {
+    tmpreg = FMC_Bank5_6->SDSR & 0x00000020; 
+  } 
+  
+  /* Set refresh count */
+  tmpreg = FMC_Bank5_6->SDRTR;
+  FMC_Bank5_6->SDRTR = (tmpreg | (0x0000027C<<1));
+  
+  /* Disable write protection */
+  tmpreg = FMC_Bank5_6->SDCR[0]; 
+  FMC_Bank5_6->SDCR[0] = (tmpreg & 0xFFFFFDFF);
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+  /* Configure and enable Bank1_SRAM2 */
+  FMC_Bank1->BTCR[2]  = 0x00001011;
+  FMC_Bank1->BTCR[3]  = 0x00000201;
+  FMC_Bank1E->BWTR[2] = 0x0fffffff;
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */ 
+#if defined(STM32F469xx) || defined(STM32F479xx)
+  /* Configure and enable Bank1_SRAM2 */
+  FMC_Bank1->BTCR[2]  = 0x00001091;
+  FMC_Bank1->BTCR[3]  = 0x00110212;
+  FMC_Bank1E->BWTR[2] = 0x0fffffff;
+#endif /* STM32F469xx || STM32F479xx */
+
+  (void)(tmp); 
+}
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
+#elif defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM)
+/**
+  * @brief  Setup the external memory controller.
+  *         Called in startup_stm32f4xx.s before jump to main.
+  *         This function configures the external memories (SRAM/SDRAM)
+  *         This SRAM/SDRAM will be used as program data memory (including heap and stack).
+  * @param  None
+  * @retval None
+  */
+void SystemInit_ExtMemCtl(void)
+{
+  __IO uint32_t tmp = 0x00;
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\
+ || defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
+#if defined (DATA_IN_ExtSDRAM)
+  register uint32_t tmpreg = 0, timeout = 0xFFFF;
+  register __IO uint32_t index;
+
+#if defined(STM32F446xx)
+  /* Enable GPIOA, GPIOC, GPIOD, GPIOE, GPIOF, GPIOG interface
+      clock */
+  RCC->AHB1ENR |= 0x0000007D;
+#else
+  /* Enable GPIOC, GPIOD, GPIOE, GPIOF, GPIOG, GPIOH and GPIOI interface 
+      clock */
+  RCC->AHB1ENR |= 0x000001F8;
+#endif /* STM32F446xx */  
+  /* Delay after an RCC peripheral clock enabling */
+  tmp = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOCEN);
+  
+#if defined(STM32F446xx)
+  /* Connect PAx pins to FMC Alternate function */
+  GPIOA->AFR[0]  |= 0xC0000000;
+  GPIOA->AFR[1]  |= 0x00000000;
+  /* Configure PDx pins in Alternate function mode */
+  GPIOA->MODER   |= 0x00008000;
+  /* Configure PDx pins speed to 50 MHz */
+  GPIOA->OSPEEDR |= 0x00008000;
+  /* Configure PDx pins Output type to push-pull */
+  GPIOA->OTYPER  |= 0x00000000;
+  /* No pull-up, pull-down for PDx pins */
+  GPIOA->PUPDR   |= 0x00000000;
+
+  /* Connect PCx pins to FMC Alternate function */
+  GPIOC->AFR[0]  |= 0x00CC0000;
+  GPIOC->AFR[1]  |= 0x00000000;
+  /* Configure PDx pins in Alternate function mode */
+  GPIOC->MODER   |= 0x00000A00;
+  /* Configure PDx pins speed to 50 MHz */
+  GPIOC->OSPEEDR |= 0x00000A00;
+  /* Configure PDx pins Output type to push-pull */
+  GPIOC->OTYPER  |= 0x00000000;
+  /* No pull-up, pull-down for PDx pins */
+  GPIOC->PUPDR   |= 0x00000000;
+#endif /* STM32F446xx */
+
+  /* Connect PDx pins to FMC Alternate function */
+  GPIOD->AFR[0]  = 0x000000CC;
+  GPIOD->AFR[1]  = 0xCC000CCC;
+  /* Configure PDx pins in Alternate function mode */  
+  GPIOD->MODER   = 0xA02A000A;
+  /* Configure PDx pins speed to 50 MHz */  
+  GPIOD->OSPEEDR = 0xA02A000A;
+  /* Configure PDx pins Output type to push-pull */  
+  GPIOD->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PDx pins */ 
+  GPIOD->PUPDR   = 0x00000000;
+
+  /* Connect PEx pins to FMC Alternate function */
+  GPIOE->AFR[0]  = 0xC00000CC;
+  GPIOE->AFR[1]  = 0xCCCCCCCC;
+  /* Configure PEx pins in Alternate function mode */ 
+  GPIOE->MODER   = 0xAAAA800A;
+  /* Configure PEx pins speed to 50 MHz */ 
+  GPIOE->OSPEEDR = 0xAAAA800A;
+  /* Configure PEx pins Output type to push-pull */  
+  GPIOE->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PEx pins */ 
+  GPIOE->PUPDR   = 0x00000000;
+
+  /* Connect PFx pins to FMC Alternate function */
+  GPIOF->AFR[0]  = 0xCCCCCCCC;
+  GPIOF->AFR[1]  = 0xCCCCCCCC;
+  /* Configure PFx pins in Alternate function mode */   
+  GPIOF->MODER   = 0xAA800AAA;
+  /* Configure PFx pins speed to 50 MHz */ 
+  GPIOF->OSPEEDR = 0xAA800AAA;
+  /* Configure PFx pins Output type to push-pull */  
+  GPIOF->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PFx pins */ 
+  GPIOF->PUPDR   = 0x00000000;
+
+  /* Connect PGx pins to FMC Alternate function */
+  GPIOG->AFR[0]  = 0xCCCCCCCC;
+  GPIOG->AFR[1]  = 0xCCCCCCCC;
+  /* Configure PGx pins in Alternate function mode */ 
+  GPIOG->MODER   = 0xAAAAAAAA;
+  /* Configure PGx pins speed to 50 MHz */ 
+  GPIOG->OSPEEDR = 0xAAAAAAAA;
+  /* Configure PGx pins Output type to push-pull */  
+  GPIOG->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PGx pins */ 
+  GPIOG->PUPDR   = 0x00000000;
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\
+ || defined(STM32F469xx) || defined(STM32F479xx)  
+  /* Connect PHx pins to FMC Alternate function */
+  GPIOH->AFR[0]  = 0x00C0CC00;
+  GPIOH->AFR[1]  = 0xCCCCCCCC;
+  /* Configure PHx pins in Alternate function mode */ 
+  GPIOH->MODER   = 0xAAAA08A0;
+  /* Configure PHx pins speed to 50 MHz */ 
+  GPIOH->OSPEEDR = 0xAAAA08A0;
+  /* Configure PHx pins Output type to push-pull */  
+  GPIOH->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PHx pins */ 
+  GPIOH->PUPDR   = 0x00000000;
+  
+  /* Connect PIx pins to FMC Alternate function */
+  GPIOI->AFR[0]  = 0xCCCCCCCC;
+  GPIOI->AFR[1]  = 0x00000CC0;
+  /* Configure PIx pins in Alternate function mode */ 
+  GPIOI->MODER   = 0x0028AAAA;
+  /* Configure PIx pins speed to 50 MHz */ 
+  GPIOI->OSPEEDR = 0x0028AAAA;
+  /* Configure PIx pins Output type to push-pull */  
+  GPIOI->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PIx pins */ 
+  GPIOI->PUPDR   = 0x00000000;
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
+  
+/*-- FMC Configuration -------------------------------------------------------*/
+  /* Enable the FMC interface clock */
+  RCC->AHB3ENR |= 0x00000001;
+  /* Delay after an RCC peripheral clock enabling */
+  tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);
+
+  /* Configure and enable SDRAM bank1 */
+#if defined(STM32F446xx)
+  FMC_Bank5_6->SDCR[0] = 0x00001954;
+#else  
+  FMC_Bank5_6->SDCR[0] = 0x000019E4;
+#endif /* STM32F446xx */
+  FMC_Bank5_6->SDTR[0] = 0x01115351;      
+  
+  /* SDRAM initialization sequence */
+  /* Clock enable command */
+  FMC_Bank5_6->SDCMR = 0x00000011; 
+  tmpreg = FMC_Bank5_6->SDSR & 0x00000020; 
+  while((tmpreg != 0) && (timeout-- > 0))
+  {
+    tmpreg = FMC_Bank5_6->SDSR & 0x00000020; 
+  }
+
+  /* Delay */
+  for (index = 0; index<1000; index++);
+  
+  /* PALL command */
+  FMC_Bank5_6->SDCMR = 0x00000012;           
+  tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
+  timeout = 0xFFFF;
+  while((tmpreg != 0) && (timeout-- > 0))
+  {
+    tmpreg = FMC_Bank5_6->SDSR & 0x00000020; 
+  }
+  
+  /* Auto refresh command */
+#if defined(STM32F446xx)
+  FMC_Bank5_6->SDCMR = 0x000000F3;
+#else  
+  FMC_Bank5_6->SDCMR = 0x00000073;
+#endif /* STM32F446xx */
+  tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
+  timeout = 0xFFFF;
+  while((tmpreg != 0) && (timeout-- > 0))
+  {
+    tmpreg = FMC_Bank5_6->SDSR & 0x00000020; 
+  }
+ 
+  /* MRD register program */
+#if defined(STM32F446xx)
+  FMC_Bank5_6->SDCMR = 0x00044014;
+#else  
+  FMC_Bank5_6->SDCMR = 0x00046014;
+#endif /* STM32F446xx */
+  tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
+  timeout = 0xFFFF;
+  while((tmpreg != 0) && (timeout-- > 0))
+  {
+    tmpreg = FMC_Bank5_6->SDSR & 0x00000020; 
+  } 
+  
+  /* Set refresh count */
+  tmpreg = FMC_Bank5_6->SDRTR;
+#if defined(STM32F446xx)
+  FMC_Bank5_6->SDRTR = (tmpreg | (0x0000050C<<1));
+#else    
+  FMC_Bank5_6->SDRTR = (tmpreg | (0x0000027C<<1));
+#endif /* STM32F446xx */
+  
+  /* Disable write protection */
+  tmpreg = FMC_Bank5_6->SDCR[0]; 
+  FMC_Bank5_6->SDCR[0] = (tmpreg & 0xFFFFFDFF);
+#endif /* DATA_IN_ExtSDRAM */
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx)\
+ || defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\
+ || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx)
+
+#if defined(DATA_IN_ExtSRAM)
+/*-- GPIOs Configuration -----------------------------------------------------*/
+   /* Enable GPIOD, GPIOE, GPIOF and GPIOG interface clock */
+  RCC->AHB1ENR   |= 0x00000078;
+  /* Delay after an RCC peripheral clock enabling */
+  tmp = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);
+  
+  /* Connect PDx pins to FMC Alternate function */
+  GPIOD->AFR[0]  = 0x00CCC0CC;
+  GPIOD->AFR[1]  = 0xCCCCCCCC;
+  /* Configure PDx pins in Alternate function mode */  
+  GPIOD->MODER   = 0xAAAA0A8A;
+  /* Configure PDx pins speed to 100 MHz */  
+  GPIOD->OSPEEDR = 0xFFFF0FCF;
+  /* Configure PDx pins Output type to push-pull */  
+  GPIOD->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PDx pins */ 
+  GPIOD->PUPDR   = 0x00000000;
+
+  /* Connect PEx pins to FMC Alternate function */
+  GPIOE->AFR[0]  = 0xC00CC0CC;
+  GPIOE->AFR[1]  = 0xCCCCCCCC;
+  /* Configure PEx pins in Alternate function mode */ 
+  GPIOE->MODER   = 0xAAAA828A;
+  /* Configure PEx pins speed to 100 MHz */ 
+  GPIOE->OSPEEDR = 0xFFFFC3CF;
+  /* Configure PEx pins Output type to push-pull */  
+  GPIOE->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PEx pins */ 
+  GPIOE->PUPDR   = 0x00000000;
+
+  /* Connect PFx pins to FMC Alternate function */
+  GPIOF->AFR[0]  = 0x00CCCCCC;
+  GPIOF->AFR[1]  = 0xCCCC0000;
+  /* Configure PFx pins in Alternate function mode */   
+  GPIOF->MODER   = 0xAA000AAA;
+  /* Configure PFx pins speed to 100 MHz */ 
+  GPIOF->OSPEEDR = 0xFF000FFF;
+  /* Configure PFx pins Output type to push-pull */  
+  GPIOF->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PFx pins */ 
+  GPIOF->PUPDR   = 0x00000000;
+
+  /* Connect PGx pins to FMC Alternate function */
+  GPIOG->AFR[0]  = 0x00CCCCCC;
+  GPIOG->AFR[1]  = 0x000000C0;
+  /* Configure PGx pins in Alternate function mode */ 
+  GPIOG->MODER   = 0x00085AAA;
+  /* Configure PGx pins speed to 100 MHz */ 
+  GPIOG->OSPEEDR = 0x000CAFFF;
+  /* Configure PGx pins Output type to push-pull */  
+  GPIOG->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PGx pins */ 
+  GPIOG->PUPDR   = 0x00000000;
+  
+/*-- FMC/FSMC Configuration --------------------------------------------------*/
+  /* Enable the FMC/FSMC interface clock */
+  RCC->AHB3ENR         |= 0x00000001;
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+  /* Delay after an RCC peripheral clock enabling */
+  tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);
+  /* Configure and enable Bank1_SRAM2 */
+  FMC_Bank1->BTCR[2]  = 0x00001011;
+  FMC_Bank1->BTCR[3]  = 0x00000201;
+  FMC_Bank1E->BWTR[2] = 0x0fffffff;
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */ 
+#if defined(STM32F469xx) || defined(STM32F479xx)
+  /* Delay after an RCC peripheral clock enabling */
+  tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);
+  /* Configure and enable Bank1_SRAM2 */
+  FMC_Bank1->BTCR[2]  = 0x00001091;
+  FMC_Bank1->BTCR[3]  = 0x00110212;
+  FMC_Bank1E->BWTR[2] = 0x0fffffff;
+#endif /* STM32F469xx || STM32F479xx */
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx)|| defined(STM32F417xx)\
+   || defined(STM32F412Zx) || defined(STM32F412Vx)
+  /* Delay after an RCC peripheral clock enabling */
+  tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FSMCEN);
+  /* Configure and enable Bank1_SRAM2 */
+  FSMC_Bank1->BTCR[2]  = 0x00001011;
+  FSMC_Bank1->BTCR[3]  = 0x00000201;
+  FSMC_Bank1E->BWTR[2] = 0x0FFFFFFF;
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F412Zx || STM32F412Vx */
+
+#endif /* DATA_IN_ExtSRAM */
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx ||\
+          STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx  */ 
+  (void)(tmp); 
+}
+#endif /* DATA_IN_ExtSRAM && DATA_IN_ExtSDRAM */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

libs/STM32_HAL/src/stm32f4xx/stm32f4xx_hal.c

@@ -0,0 +1,615 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal.c
+  * @author  MCD Application Team
+  * @brief   HAL module driver.
+  *          This is the common part of the HAL initialization
+  *
+  @verbatim
+  ==============================================================================
+                     ##### How to use this driver #####
+  ==============================================================================
+    [..]
+    The common HAL driver contains a set of generic and common APIs that can be
+    used by the PPP peripheral drivers and the user to start using the HAL. 
+    [..]
+    The HAL contains two APIs' categories: 
+         (+) Common HAL APIs
+         (+) Services HAL APIs
+
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */ 
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup HAL HAL
+  * @brief HAL module driver.
+  * @{
+  */
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @addtogroup HAL_Private_Constants
+  * @{
+  */
+/**
+  * @brief STM32F4xx HAL Driver version number V1.7.13
+  */
+#define __STM32F4xx_HAL_VERSION_MAIN   (0x01U) /*!< [31:24] main version */
+#define __STM32F4xx_HAL_VERSION_SUB1   (0x07U) /*!< [23:16] sub1 version */
+#define __STM32F4xx_HAL_VERSION_SUB2   (0x0DU) /*!< [15:8]  sub2 version */
+#define __STM32F4xx_HAL_VERSION_RC     (0x00U) /*!< [7:0]  release candidate */ 
+#define __STM32F4xx_HAL_VERSION         ((__STM32F4xx_HAL_VERSION_MAIN << 24U)\
+                                        |(__STM32F4xx_HAL_VERSION_SUB1 << 16U)\
+                                        |(__STM32F4xx_HAL_VERSION_SUB2 << 8U )\
+                                        |(__STM32F4xx_HAL_VERSION_RC))
+                                        
+#define IDCODE_DEVID_MASK    0x00000FFFU
+
+/* ------------ RCC registers bit address in the alias region ----------- */
+#define SYSCFG_OFFSET             (SYSCFG_BASE - PERIPH_BASE)
+/* ---  MEMRMP Register ---*/ 
+/* Alias word address of UFB_MODE bit */ 
+#define MEMRMP_OFFSET             SYSCFG_OFFSET 
+#define UFB_MODE_BIT_NUMBER       SYSCFG_MEMRMP_UFB_MODE_Pos
+#define UFB_MODE_BB               (uint32_t)(PERIPH_BB_BASE + (MEMRMP_OFFSET * 32U) + (UFB_MODE_BIT_NUMBER * 4U)) 
+
+/* ---  CMPCR Register ---*/ 
+/* Alias word address of CMP_PD bit */ 
+#define CMPCR_OFFSET              (SYSCFG_OFFSET + 0x20U) 
+#define CMP_PD_BIT_NUMBER         SYSCFG_CMPCR_CMP_PD_Pos
+#define CMPCR_CMP_PD_BB           (uint32_t)(PERIPH_BB_BASE + (CMPCR_OFFSET * 32U) + (CMP_PD_BIT_NUMBER * 4U))
+
+/* ---  MCHDLYCR Register ---*/ 
+/* Alias word address of BSCKSEL bit */ 
+#define MCHDLYCR_OFFSET            (SYSCFG_OFFSET + 0x30U) 
+#define BSCKSEL_BIT_NUMBER         SYSCFG_MCHDLYCR_BSCKSEL_Pos
+#define MCHDLYCR_BSCKSEL_BB        (uint32_t)(PERIPH_BB_BASE + (MCHDLYCR_OFFSET * 32U) + (BSCKSEL_BIT_NUMBER * 4U))
+/**
+  * @}
+  */
+
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/** @addtogroup HAL_Private_Variables
+  * @{
+  */
+__IO uint32_t uwTick;
+uint32_t uwTickPrio   = (1UL << __NVIC_PRIO_BITS); /* Invalid PRIO */
+HAL_TickFreqTypeDef uwTickFreq = HAL_TICK_FREQ_DEFAULT;  /* 1KHz */
+/**
+  * @}
+  */
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+
+/** @defgroup HAL_Exported_Functions HAL Exported Functions
+  * @{
+  */
+
+/** @defgroup HAL_Exported_Functions_Group1 Initialization and de-initialization Functions 
+ *  @brief    Initialization and de-initialization functions
+ *
+@verbatim    
+ ===============================================================================
+              ##### Initialization and Configuration functions #####
+ ===============================================================================
+    [..]  This section provides functions allowing to:
+      (+) Initializes the Flash interface the NVIC allocation and initial clock 
+          configuration. It initializes the systick also when timeout is needed 
+          and the backup domain when enabled.
+      (+) De-Initializes common part of the HAL.
+      (+) Configure the time base source to have 1ms time base with a dedicated 
+          Tick interrupt priority. 
+        (++) SysTick timer is used by default as source of time base, but user
+             can eventually implement his proper time base source (a general purpose 
+             timer for example or other time source), keeping in mind that Time base 
+             duration should be kept 1ms since PPP_TIMEOUT_VALUEs are defined and 
+             handled in milliseconds basis.
+        (++) Time base configuration function (HAL_InitTick ()) is called automatically 
+             at the beginning of the program after reset by HAL_Init() or at any time 
+             when clock is configured, by HAL_RCC_ClockConfig(). 
+        (++) Source of time base is configured  to generate interrupts at regular 
+             time intervals. Care must be taken if HAL_Delay() is called from a 
+             peripheral ISR process, the Tick interrupt line must have higher priority 
+            (numerically lower) than the peripheral interrupt. Otherwise the caller 
+            ISR process will be blocked. 
+       (++) functions affecting time base configurations are declared as __weak  
+             to make  override possible  in case of other  implementations in user file.
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  This function is used to initialize the HAL Library; it must be the first 
+  *         instruction to be executed in the main program (before to call any other
+  *         HAL function), it performs the following:
+  *           Configure the Flash prefetch, instruction and Data caches.
+  *           Configures the SysTick to generate an interrupt each 1 millisecond,
+  *           which is clocked by the HSI (at this stage, the clock is not yet
+  *           configured and thus the system is running from the internal HSI at 16 MHz).
+  *           Set NVIC Group Priority to 4.
+  *           Calls the HAL_MspInit() callback function defined in user file 
+  *           "stm32f4xx_hal_msp.c" to do the global low level hardware initialization 
+  *            
+  * @note   SysTick is used as time base for the HAL_Delay() function, the application
+  *         need to ensure that the SysTick time base is always set to 1 millisecond
+  *         to have correct HAL operation.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_Init(void)
+{
+  /* Configure Flash prefetch, Instruction cache, Data cache */ 
+#if (INSTRUCTION_CACHE_ENABLE != 0U)
+  __HAL_FLASH_INSTRUCTION_CACHE_ENABLE();
+#endif /* INSTRUCTION_CACHE_ENABLE */
+
+#if (DATA_CACHE_ENABLE != 0U)
+  __HAL_FLASH_DATA_CACHE_ENABLE();
+#endif /* DATA_CACHE_ENABLE */
+
+#if (PREFETCH_ENABLE != 0U)
+  __HAL_FLASH_PREFETCH_BUFFER_ENABLE();
+#endif /* PREFETCH_ENABLE */
+
+  /* Set Interrupt Group Priority */
+  HAL_NVIC_SetPriorityGrouping(NVIC_PRIORITYGROUP_4);
+
+  /* Use systick as time base source and configure 1ms tick (default clock after Reset is HSI) */
+  HAL_InitTick(TICK_INT_PRIORITY);
+
+  /* Init the low level hardware */
+  HAL_MspInit();
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  This function de-Initializes common part of the HAL and stops the systick.
+  *         This function is optional.   
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DeInit(void)
+{
+  /* Reset of all peripherals */
+  __HAL_RCC_APB1_FORCE_RESET();
+  __HAL_RCC_APB1_RELEASE_RESET();
+
+  __HAL_RCC_APB2_FORCE_RESET();
+  __HAL_RCC_APB2_RELEASE_RESET();
+
+  __HAL_RCC_AHB1_FORCE_RESET();
+  __HAL_RCC_AHB1_RELEASE_RESET();
+
+  __HAL_RCC_AHB2_FORCE_RESET();
+  __HAL_RCC_AHB2_RELEASE_RESET();
+
+  __HAL_RCC_AHB3_FORCE_RESET();
+  __HAL_RCC_AHB3_RELEASE_RESET();
+
+  /* De-Init the low level hardware */
+  HAL_MspDeInit();
+    
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initialize the MSP.
+  * @retval None
+  */
+__weak void HAL_MspInit(void)
+{
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_MspInit could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  DeInitializes the MSP.
+  * @retval None
+  */
+__weak void HAL_MspDeInit(void)
+{
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_MspDeInit could be implemented in the user file
+   */ 
+}
+
+/**
+  * @brief This function configures the source of the time base.
+  *        The time source is configured  to have 1ms time base with a dedicated 
+  *        Tick interrupt priority.
+  * @note This function is called  automatically at the beginning of program after
+  *       reset by HAL_Init() or at any time when clock is reconfigured  by HAL_RCC_ClockConfig().
+  * @note In the default implementation, SysTick timer is the source of time base. 
+  *       It is used to generate interrupts at regular time intervals. 
+  *       Care must be taken if HAL_Delay() is called from a peripheral ISR process, 
+  *       The SysTick interrupt must have higher priority (numerically lower)
+  *       than the peripheral interrupt. Otherwise the caller ISR process will be blocked.
+  *       The function is declared as __weak  to be overwritten  in case of other
+  *       implementation  in user file.
+  * @param TickPriority Tick interrupt priority.
+  * @retval HAL status
+  */
+__weak HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority)
+{
+  /* Configure the SysTick to have interrupt in 1ms time basis*/
+  if (HAL_SYSTICK_Config(SystemCoreClock / (1000U / uwTickFreq)) > 0U)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Configure the SysTick IRQ priority */
+  if (TickPriority < (1UL << __NVIC_PRIO_BITS))
+  {
+    HAL_NVIC_SetPriority(SysTick_IRQn, TickPriority, 0U);
+    uwTickPrio = TickPriority;
+  }
+  else
+  {
+    return HAL_ERROR;
+  }
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup HAL_Exported_Functions_Group2 HAL Control functions 
+ *  @brief    HAL Control functions
+ *
+@verbatim
+ ===============================================================================
+                      ##### HAL Control functions #####
+ ===============================================================================
+    [..]  This section provides functions allowing to:
+      (+) Provide a tick value in millisecond
+      (+) Provide a blocking delay in millisecond
+      (+) Suspend the time base source interrupt
+      (+) Resume the time base source interrupt
+      (+) Get the HAL API driver version
+      (+) Get the device identifier
+      (+) Get the device revision identifier
+      (+) Enable/Disable Debug module during SLEEP mode
+      (+) Enable/Disable Debug module during STOP mode
+      (+) Enable/Disable Debug module during STANDBY mode
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief This function is called to increment  a global variable "uwTick"
+  *        used as application time base.
+  * @note In the default implementation, this variable is incremented each 1ms
+  *       in SysTick ISR.
+ * @note This function is declared as __weak to be overwritten in case of other 
+  *      implementations in user file.
+  * @retval None
+  */
+__weak void HAL_IncTick(void)
+{
+  uwTick += uwTickFreq;
+}
+
+/**
+  * @brief Provides a tick value in millisecond.
+  * @note This function is declared as __weak to be overwritten in case of other 
+  *       implementations in user file.
+  * @retval tick value
+  */
+__weak uint32_t HAL_GetTick(void)
+{
+  return uwTick;
+}
+
+/**
+  * @brief This function returns a tick priority.
+  * @retval tick priority
+  */
+uint32_t HAL_GetTickPrio(void)
+{
+  return uwTickPrio;
+}
+
+/**
+  * @brief Set new tick Freq.
+  * @retval Status
+  */
+HAL_StatusTypeDef HAL_SetTickFreq(HAL_TickFreqTypeDef Freq)
+{
+  HAL_StatusTypeDef status  = HAL_OK;
+  HAL_TickFreqTypeDef prevTickFreq;
+
+  assert_param(IS_TICKFREQ(Freq));
+
+  if (uwTickFreq != Freq)
+  {
+    /* Back up uwTickFreq frequency */
+    prevTickFreq = uwTickFreq;
+
+    /* Update uwTickFreq global variable used by HAL_InitTick() */
+    uwTickFreq = Freq;
+
+    /* Apply the new tick Freq  */
+    status = HAL_InitTick(uwTickPrio);
+
+    if (status != HAL_OK)
+    {
+      /* Restore previous tick frequency */
+      uwTickFreq = prevTickFreq;
+    }
+  }
+
+  return status;
+}
+
+/**
+  * @brief Return tick frequency.
+  * @retval tick period in Hz
+  */
+HAL_TickFreqTypeDef HAL_GetTickFreq(void)
+{
+  return uwTickFreq;
+}
+
+/**
+  * @brief This function provides minimum delay (in milliseconds) based 
+  *        on variable incremented.
+  * @note In the default implementation , SysTick timer is the source of time base.
+  *       It is used to generate interrupts at regular time intervals where uwTick
+  *       is incremented.
+  * @note This function is declared as __weak to be overwritten in case of other
+  *       implementations in user file.
+  * @param Delay specifies the delay time length, in milliseconds.
+  * @retval None
+  */
+__weak void HAL_Delay(uint32_t Delay)
+{
+  uint32_t tickstart = HAL_GetTick();
+  uint32_t wait = Delay;
+
+  /* Add a freq to guarantee minimum wait */
+  if (wait < HAL_MAX_DELAY)
+  {
+    wait += (uint32_t)(uwTickFreq);
+  }
+
+  while((HAL_GetTick() - tickstart) < wait)
+  {
+  }
+}
+
+/**
+  * @brief Suspend Tick increment.
+  * @note In the default implementation , SysTick timer is the source of time base. It is
+  *       used to generate interrupts at regular time intervals. Once HAL_SuspendTick()
+  *       is called, the SysTick interrupt will be disabled and so Tick increment 
+  *       is suspended.
+  * @note This function is declared as __weak to be overwritten in case of other
+  *       implementations in user file.
+  * @retval None
+  */
+__weak void HAL_SuspendTick(void)
+{
+  /* Disable SysTick Interrupt */
+  SysTick->CTRL &= ~SysTick_CTRL_TICKINT_Msk;
+}
+
+/**
+  * @brief Resume Tick increment.
+  * @note In the default implementation , SysTick timer is the source of time base. It is
+  *       used to generate interrupts at regular time intervals. Once HAL_ResumeTick()
+  *       is called, the SysTick interrupt will be enabled and so Tick increment 
+  *       is resumed.
+  * @note This function is declared as __weak to be overwritten in case of other
+  *       implementations in user file.
+  * @retval None
+  */
+__weak void HAL_ResumeTick(void)
+{
+  /* Enable SysTick Interrupt */
+  SysTick->CTRL  |= SysTick_CTRL_TICKINT_Msk;
+}
+
+/**
+  * @brief  Returns the HAL revision
+  * @retval version : 0xXYZR (8bits for each decimal, R for RC)
+  */
+uint32_t HAL_GetHalVersion(void)
+{
+  return __STM32F4xx_HAL_VERSION;
+}
+
+/**
+  * @brief  Returns the device revision identifier.
+  * @retval Device revision identifier
+  */
+uint32_t HAL_GetREVID(void)
+{
+  return((DBGMCU->IDCODE) >> 16U);
+}
+
+/**
+  * @brief  Returns the device identifier.
+  * @retval Device identifier
+  */
+uint32_t HAL_GetDEVID(void)
+{
+  return((DBGMCU->IDCODE) & IDCODE_DEVID_MASK);
+}
+
+/**
+  * @brief  Enable the Debug Module during SLEEP mode
+  * @retval None
+  */
+void HAL_DBGMCU_EnableDBGSleepMode(void)
+{
+  SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEP);
+}
+
+/**
+  * @brief  Disable the Debug Module during SLEEP mode
+  * @retval None
+  */
+void HAL_DBGMCU_DisableDBGSleepMode(void)
+{
+  CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEP);
+}
+
+/**
+  * @brief  Enable the Debug Module during STOP mode
+  * @retval None
+  */
+void HAL_DBGMCU_EnableDBGStopMode(void)
+{
+  SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP);
+}
+
+/**
+  * @brief  Disable the Debug Module during STOP mode
+  * @retval None
+  */
+void HAL_DBGMCU_DisableDBGStopMode(void)
+{
+  CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP);
+}
+
+/**
+  * @brief  Enable the Debug Module during STANDBY mode
+  * @retval None
+  */
+void HAL_DBGMCU_EnableDBGStandbyMode(void)
+{
+  SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBY);
+}
+
+/**
+  * @brief  Disable the Debug Module during STANDBY mode
+  * @retval None
+  */
+void HAL_DBGMCU_DisableDBGStandbyMode(void)
+{
+  CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBY);
+}
+
+/**
+  * @brief  Enables the I/O Compensation Cell.
+  * @note   The I/O compensation cell can be used only when the device supply
+  *         voltage ranges from 2.4 to 3.6 V.  
+  * @retval None
+  */
+void HAL_EnableCompensationCell(void)
+{
+  *(__IO uint32_t *)CMPCR_CMP_PD_BB = (uint32_t)ENABLE;
+}
+
+/**
+  * @brief  Power-down the I/O Compensation Cell.
+  * @note   The I/O compensation cell can be used only when the device supply
+  *         voltage ranges from 2.4 to 3.6 V.  
+  * @retval None
+  */
+void HAL_DisableCompensationCell(void)
+{
+  *(__IO uint32_t *)CMPCR_CMP_PD_BB = (uint32_t)DISABLE;
+}
+
+/**
+  * @brief  Returns first word of the unique device identifier (UID based on 96 bits)
+  * @retval Device identifier
+  */
+uint32_t HAL_GetUIDw0(void)
+{
+  return (READ_REG(*((uint32_t *)UID_BASE)));
+}
+
+/**
+  * @brief  Returns second word of the unique device identifier (UID based on 96 bits)
+  * @retval Device identifier
+  */
+uint32_t HAL_GetUIDw1(void)
+{
+  return (READ_REG(*((uint32_t *)(UID_BASE + 4U))));
+}
+
+/**
+  * @brief  Returns third word of the unique device identifier (UID based on 96 bits)
+  * @retval Device identifier
+  */
+uint32_t HAL_GetUIDw2(void)
+{
+  return (READ_REG(*((uint32_t *)(UID_BASE + 8U))));
+}
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) ||\
+    defined(STM32F469xx) || defined(STM32F479xx)
+/**
+  * @brief  Enables the Internal FLASH Bank Swapping.
+  *   
+  * @note   This function can be used only for STM32F42xxx/43xxx/469xx/479xx devices. 
+  *
+  * @note   Flash Bank2 mapped at 0x08000000 (and aliased @0x00000000) 
+  *         and Flash Bank1 mapped at 0x08100000 (and aliased at 0x00100000)   
+  *
+  * @retval None
+  */
+void HAL_EnableMemorySwappingBank(void)
+{
+  *(__IO uint32_t *)UFB_MODE_BB = (uint32_t)ENABLE;
+}
+
+/**
+  * @brief  Disables the Internal FLASH Bank Swapping.
+  *   
+  * @note   This function can be used only for STM32F42xxx/43xxx/469xx/479xx devices. 
+  *
+  * @note   The default state : Flash Bank1 mapped at 0x08000000 (and aliased @0x00000000) 
+  *         and Flash Bank2 mapped at 0x08100000 (and aliased at 0x00100000) 
+  *           
+  * @retval None
+  */
+void HAL_DisableMemorySwappingBank(void)
+{
+  *(__IO uint32_t *)UFB_MODE_BB = (uint32_t)DISABLE;
+}
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

libs/STM32_HAL/src/stm32f4xx/stm32f4xx_hal_cortex.c

@@ -0,0 +1,505 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_cortex.c
+  * @author  MCD Application Team
+  * @brief   CORTEX HAL module driver.
+  *          This file provides firmware functions to manage the following 
+  *          functionalities of the CORTEX:
+  *           + Initialization and de-initialization functions
+  *           + Peripheral Control functions 
+  *
+  @verbatim  
+  ==============================================================================
+                        ##### How to use this driver #####
+  ==============================================================================
+
+    [..]  
+    *** How to configure Interrupts using CORTEX HAL driver ***
+    ===========================================================
+    [..]     
+    This section provides functions allowing to configure the NVIC interrupts (IRQ).
+    The Cortex-M4 exceptions are managed by CMSIS functions.
+   
+    (#) Configure the NVIC Priority Grouping using HAL_NVIC_SetPriorityGrouping()
+        function according to the following table.
+    (#) Configure the priority of the selected IRQ Channels using HAL_NVIC_SetPriority(). 
+    (#) Enable the selected IRQ Channels using HAL_NVIC_EnableIRQ().
+    (#) please refer to programming manual for details in how to configure priority. 
+      
+     -@- When the NVIC_PRIORITYGROUP_0 is selected, IRQ preemption is no more possible. 
+         The pending IRQ priority will be managed only by the sub priority.
+   
+     -@- IRQ priority order (sorted by highest to lowest priority):
+        (+@) Lowest preemption priority
+        (+@) Lowest sub priority
+        (+@) Lowest hardware priority (IRQ number)
+ 
+    [..]  
+    *** How to configure Systick using CORTEX HAL driver ***
+    ========================================================
+    [..]
+    Setup SysTick Timer for time base.
+           
+   (+) The HAL_SYSTICK_Config() function calls the SysTick_Config() function which
+       is a CMSIS function that:
+        (++) Configures the SysTick Reload register with value passed as function parameter.
+        (++) Configures the SysTick IRQ priority to the lowest value 0x0F.
+        (++) Resets the SysTick Counter register.
+        (++) Configures the SysTick Counter clock source to be Core Clock Source (HCLK).
+        (++) Enables the SysTick Interrupt.
+        (++) Starts the SysTick Counter.
+    
+   (+) You can change the SysTick Clock source to be HCLK_Div8 by calling the macro
+       __HAL_CORTEX_SYSTICKCLK_CONFIG(SYSTICK_CLKSOURCE_HCLK_DIV8) just after the
+       HAL_SYSTICK_Config() function call. The __HAL_CORTEX_SYSTICKCLK_CONFIG() macro is defined
+       inside the stm32f4xx_hal_cortex.h file.
+
+   (+) You can change the SysTick IRQ priority by calling the
+       HAL_NVIC_SetPriority(SysTick_IRQn,...) function just after the HAL_SYSTICK_Config() function 
+       call. The HAL_NVIC_SetPriority() call the NVIC_SetPriority() function which is a CMSIS function.
+
+   (+) To adjust the SysTick time base, use the following formula:
+                            
+       Reload Value = SysTick Counter Clock (Hz) x  Desired Time base (s)
+       (++) Reload Value is the parameter to be passed for HAL_SYSTICK_Config() function
+       (++) Reload Value should not exceed 0xFFFFFF
+   
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup CORTEX CORTEX
+  * @brief CORTEX HAL module driver
+  * @{
+  */
+
+#ifdef HAL_CORTEX_MODULE_ENABLED
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+
+/** @defgroup CORTEX_Exported_Functions CORTEX Exported Functions
+  * @{
+  */
+
+
+/** @defgroup CORTEX_Exported_Functions_Group1 Initialization and de-initialization functions
+ *  @brief    Initialization and Configuration functions 
+ *
+@verbatim    
+  ==============================================================================
+              ##### Initialization and de-initialization functions #####
+  ==============================================================================
+    [..]
+      This section provides the CORTEX HAL driver functions allowing to configure Interrupts
+      Systick functionalities 
+
+@endverbatim
+  * @{
+  */
+
+
+/**
+  * @brief  Sets the priority grouping field (preemption priority and subpriority)
+  *         using the required unlock sequence.
+  * @param  PriorityGroup The priority grouping bits length. 
+  *         This parameter can be one of the following values:
+  *         @arg NVIC_PRIORITYGROUP_0: 0 bits for preemption priority
+  *                                    4 bits for subpriority
+  *         @arg NVIC_PRIORITYGROUP_1: 1 bits for preemption priority
+  *                                    3 bits for subpriority
+  *         @arg NVIC_PRIORITYGROUP_2: 2 bits for preemption priority
+  *                                    2 bits for subpriority
+  *         @arg NVIC_PRIORITYGROUP_3: 3 bits for preemption priority
+  *                                    1 bits for subpriority
+  *         @arg NVIC_PRIORITYGROUP_4: 4 bits for preemption priority
+  *                                    0 bits for subpriority
+  * @note   When the NVIC_PriorityGroup_0 is selected, IRQ preemption is no more possible. 
+  *         The pending IRQ priority will be managed only by the subpriority. 
+  * @retval None
+  */
+void HAL_NVIC_SetPriorityGrouping(uint32_t PriorityGroup)
+{
+  /* Check the parameters */
+  assert_param(IS_NVIC_PRIORITY_GROUP(PriorityGroup));
+  
+  /* Set the PRIGROUP[10:8] bits according to the PriorityGroup parameter value */
+  NVIC_SetPriorityGrouping(PriorityGroup);
+}
+
+/**
+  * @brief  Sets the priority of an interrupt.
+  * @param  IRQn External interrupt number.
+  *         This parameter can be an enumerator of IRQn_Type enumeration
+  *         (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f4xxxx.h))
+  * @param  PreemptPriority The preemption priority for the IRQn channel.
+  *         This parameter can be a value between 0 and 15
+  *         A lower priority value indicates a higher priority 
+  * @param  SubPriority the subpriority level for the IRQ channel.
+  *         This parameter can be a value between 0 and 15
+  *         A lower priority value indicates a higher priority.          
+  * @retval None
+  */
+void HAL_NVIC_SetPriority(IRQn_Type IRQn, uint32_t PreemptPriority, uint32_t SubPriority)
+{ 
+  uint32_t prioritygroup = 0x00U;
+  
+  /* Check the parameters */
+  assert_param(IS_NVIC_SUB_PRIORITY(SubPriority));
+  assert_param(IS_NVIC_PREEMPTION_PRIORITY(PreemptPriority));
+  
+  prioritygroup = NVIC_GetPriorityGrouping();
+  
+  NVIC_SetPriority(IRQn, NVIC_EncodePriority(prioritygroup, PreemptPriority, SubPriority));
+}
+
+/**
+  * @brief  Enables a device specific interrupt in the NVIC interrupt controller.
+  * @note   To configure interrupts priority correctly, the NVIC_PriorityGroupConfig()
+  *         function should be called before. 
+  * @param  IRQn External interrupt number.
+  *         This parameter can be an enumerator of IRQn_Type enumeration
+  *         (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f4xxxx.h))
+  * @retval None
+  */
+void HAL_NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+  /* Check the parameters */
+  assert_param(IS_NVIC_DEVICE_IRQ(IRQn));
+  
+  /* Enable interrupt */
+  NVIC_EnableIRQ(IRQn);
+}
+
+/**
+  * @brief  Disables a device specific interrupt in the NVIC interrupt controller.
+  * @param  IRQn External interrupt number.
+  *         This parameter can be an enumerator of IRQn_Type enumeration
+  *         (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f4xxxx.h))
+  * @retval None
+  */
+void HAL_NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+  /* Check the parameters */
+  assert_param(IS_NVIC_DEVICE_IRQ(IRQn));
+  
+  /* Disable interrupt */
+  NVIC_DisableIRQ(IRQn);
+}
+
+/**
+  * @brief  Initiates a system reset request to reset the MCU.
+  * @retval None
+  */
+void HAL_NVIC_SystemReset(void)
+{
+  /* System Reset */
+  NVIC_SystemReset();
+}
+
+/**
+  * @brief  Initializes the System Timer and its interrupt, and starts the System Tick Timer.
+  *         Counter is in free running mode to generate periodic interrupts.
+  * @param  TicksNumb Specifies the ticks Number of ticks between two interrupts.
+  * @retval status:  - 0  Function succeeded.
+  *                  - 1  Function failed.
+  */
+uint32_t HAL_SYSTICK_Config(uint32_t TicksNumb)
+{
+   return SysTick_Config(TicksNumb);
+}
+/**
+  * @}
+  */
+
+/** @defgroup CORTEX_Exported_Functions_Group2 Peripheral Control functions
+ *  @brief   Cortex control functions 
+ *
+@verbatim   
+  ==============================================================================
+                      ##### Peripheral Control functions #####
+  ==============================================================================  
+    [..]
+      This subsection provides a set of functions allowing to control the CORTEX
+      (NVIC, SYSTICK, MPU) functionalities. 
+ 
+      
+@endverbatim
+  * @{
+  */
+
+#if (__MPU_PRESENT == 1U)
+/**
+  * @brief  Disables the MPU
+  * @retval None
+  */
+void HAL_MPU_Disable(void)
+{
+  /* Make sure outstanding transfers are done */
+  __DMB();
+
+  /* Disable fault exceptions */
+  SCB->SHCSR &= ~SCB_SHCSR_MEMFAULTENA_Msk;
+  
+  /* Disable the MPU and clear the control register*/
+  MPU->CTRL = 0U;
+}
+
+/**
+  * @brief  Enable the MPU.
+  * @param  MPU_Control Specifies the control mode of the MPU during hard fault, 
+  *          NMI, FAULTMASK and privileged access to the default memory 
+  *          This parameter can be one of the following values:
+  *            @arg MPU_HFNMI_PRIVDEF_NONE
+  *            @arg MPU_HARDFAULT_NMI
+  *            @arg MPU_PRIVILEGED_DEFAULT
+  *            @arg MPU_HFNMI_PRIVDEF
+  * @retval None
+  */
+void HAL_MPU_Enable(uint32_t MPU_Control)
+{
+  /* Enable the MPU */
+  MPU->CTRL = MPU_Control | MPU_CTRL_ENABLE_Msk;
+  
+  /* Enable fault exceptions */
+  SCB->SHCSR |= SCB_SHCSR_MEMFAULTENA_Msk;
+  
+  /* Ensure MPU setting take effects */
+  __DSB();
+  __ISB();
+}
+
+/**
+  * @brief  Initializes and configures the Region and the memory to be protected.
+  * @param  MPU_Init Pointer to a MPU_Region_InitTypeDef structure that contains
+  *                the initialization and configuration information.
+  * @retval None
+  */
+void HAL_MPU_ConfigRegion(MPU_Region_InitTypeDef *MPU_Init)
+{
+  /* Check the parameters */
+  assert_param(IS_MPU_REGION_NUMBER(MPU_Init->Number));
+  assert_param(IS_MPU_REGION_ENABLE(MPU_Init->Enable));
+
+  /* Set the Region number */
+  MPU->RNR = MPU_Init->Number;
+
+  if ((MPU_Init->Enable) != RESET)
+  {
+    /* Check the parameters */
+    assert_param(IS_MPU_INSTRUCTION_ACCESS(MPU_Init->DisableExec));
+    assert_param(IS_MPU_REGION_PERMISSION_ATTRIBUTE(MPU_Init->AccessPermission));
+    assert_param(IS_MPU_TEX_LEVEL(MPU_Init->TypeExtField));
+    assert_param(IS_MPU_ACCESS_SHAREABLE(MPU_Init->IsShareable));
+    assert_param(IS_MPU_ACCESS_CACHEABLE(MPU_Init->IsCacheable));
+    assert_param(IS_MPU_ACCESS_BUFFERABLE(MPU_Init->IsBufferable));
+    assert_param(IS_MPU_SUB_REGION_DISABLE(MPU_Init->SubRegionDisable));
+    assert_param(IS_MPU_REGION_SIZE(MPU_Init->Size));
+    
+    MPU->RBAR = MPU_Init->BaseAddress;
+    MPU->RASR = ((uint32_t)MPU_Init->DisableExec             << MPU_RASR_XN_Pos)   |
+                ((uint32_t)MPU_Init->AccessPermission        << MPU_RASR_AP_Pos)   |
+                ((uint32_t)MPU_Init->TypeExtField            << MPU_RASR_TEX_Pos)  |
+                ((uint32_t)MPU_Init->IsShareable             << MPU_RASR_S_Pos)    |
+                ((uint32_t)MPU_Init->IsCacheable             << MPU_RASR_C_Pos)    |
+                ((uint32_t)MPU_Init->IsBufferable            << MPU_RASR_B_Pos)    |
+                ((uint32_t)MPU_Init->SubRegionDisable        << MPU_RASR_SRD_Pos)  |
+                ((uint32_t)MPU_Init->Size                    << MPU_RASR_SIZE_Pos) |
+                ((uint32_t)MPU_Init->Enable                  << MPU_RASR_ENABLE_Pos);
+  }
+  else
+  {
+    MPU->RBAR = 0x00U;
+    MPU->RASR = 0x00U;
+  }
+}
+#endif /* __MPU_PRESENT */
+
+/**
+  * @brief  Gets the priority grouping field from the NVIC Interrupt Controller.
+  * @retval Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field)
+  */
+uint32_t HAL_NVIC_GetPriorityGrouping(void)
+{
+  /* Get the PRIGROUP[10:8] field value */
+  return NVIC_GetPriorityGrouping();
+}
+
+/**
+  * @brief  Gets the priority of an interrupt.
+  * @param  IRQn External interrupt number.
+  *         This parameter can be an enumerator of IRQn_Type enumeration
+  *         (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f4xxxx.h))
+  * @param   PriorityGroup the priority grouping bits length.
+  *         This parameter can be one of the following values:
+  *           @arg NVIC_PRIORITYGROUP_0: 0 bits for preemption priority
+  *                                      4 bits for subpriority
+  *           @arg NVIC_PRIORITYGROUP_1: 1 bits for preemption priority
+  *                                      3 bits for subpriority
+  *           @arg NVIC_PRIORITYGROUP_2: 2 bits for preemption priority
+  *                                      2 bits for subpriority
+  *           @arg NVIC_PRIORITYGROUP_3: 3 bits for preemption priority
+  *                                      1 bits for subpriority
+  *           @arg NVIC_PRIORITYGROUP_4: 4 bits for preemption priority
+  *                                      0 bits for subpriority
+  * @param  pPreemptPriority Pointer on the Preemptive priority value (starting from 0).
+  * @param  pSubPriority Pointer on the Subpriority value (starting from 0).
+  * @retval None
+  */
+void HAL_NVIC_GetPriority(IRQn_Type IRQn, uint32_t PriorityGroup, uint32_t *pPreemptPriority, uint32_t *pSubPriority)
+{
+  /* Check the parameters */
+  assert_param(IS_NVIC_PRIORITY_GROUP(PriorityGroup));
+ /* Get priority for Cortex-M system or device specific interrupts */
+  NVIC_DecodePriority(NVIC_GetPriority(IRQn), PriorityGroup, pPreemptPriority, pSubPriority);
+}
+
+/**
+  * @brief  Sets Pending bit of an external interrupt.
+  * @param  IRQn External interrupt number
+  *         This parameter can be an enumerator of IRQn_Type enumeration
+  *         (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f4xxxx.h))
+  * @retval None
+  */
+void HAL_NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+  /* Check the parameters */
+  assert_param(IS_NVIC_DEVICE_IRQ(IRQn));
+  
+  /* Set interrupt pending */
+  NVIC_SetPendingIRQ(IRQn);
+}
+
+/**
+  * @brief  Gets Pending Interrupt (reads the pending register in the NVIC 
+  *         and returns the pending bit for the specified interrupt).
+  * @param  IRQn External interrupt number.
+  *          This parameter can be an enumerator of IRQn_Type enumeration
+  *         (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f4xxxx.h))
+  * @retval status: - 0  Interrupt status is not pending.
+  *                 - 1  Interrupt status is pending.
+  */
+uint32_t HAL_NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+  /* Check the parameters */
+  assert_param(IS_NVIC_DEVICE_IRQ(IRQn));
+  
+  /* Return 1 if pending else 0 */
+  return NVIC_GetPendingIRQ(IRQn);
+}
+
+/**
+  * @brief  Clears the pending bit of an external interrupt.
+  * @param  IRQn External interrupt number.
+  *         This parameter can be an enumerator of IRQn_Type enumeration
+  *         (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f4xxxx.h))
+  * @retval None
+  */
+void HAL_NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+  /* Check the parameters */
+  assert_param(IS_NVIC_DEVICE_IRQ(IRQn));
+  
+  /* Clear pending interrupt */
+  NVIC_ClearPendingIRQ(IRQn);
+}
+
+/**
+  * @brief Gets active interrupt ( reads the active register in NVIC and returns the active bit).
+  * @param IRQn External interrupt number
+  *         This parameter can be an enumerator of IRQn_Type enumeration
+  *         (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f4xxxx.h))
+  * @retval status: - 0  Interrupt status is not pending.
+  *                 - 1  Interrupt status is pending.
+  */
+uint32_t HAL_NVIC_GetActive(IRQn_Type IRQn)
+{
+  /* Check the parameters */
+  assert_param(IS_NVIC_DEVICE_IRQ(IRQn));
+  
+  /* Return 1 if active else 0 */
+  return NVIC_GetActive(IRQn);
+}
+
+/**
+  * @brief  Configures the SysTick clock source.
+  * @param  CLKSource specifies the SysTick clock source.
+  *          This parameter can be one of the following values:
+  *             @arg SYSTICK_CLKSOURCE_HCLK_DIV8: AHB clock divided by 8 selected as SysTick clock source.
+  *             @arg SYSTICK_CLKSOURCE_HCLK: AHB clock selected as SysTick clock source.
+  * @retval None
+  */
+void HAL_SYSTICK_CLKSourceConfig(uint32_t CLKSource)
+{
+  /* Check the parameters */
+  assert_param(IS_SYSTICK_CLK_SOURCE(CLKSource));
+  if (CLKSource == SYSTICK_CLKSOURCE_HCLK)
+  {
+    SysTick->CTRL |= SYSTICK_CLKSOURCE_HCLK;
+  }
+  else
+  {
+    SysTick->CTRL &= ~SYSTICK_CLKSOURCE_HCLK;
+  }
+}
+
+/**
+  * @brief  This function handles SYSTICK interrupt request.
+  * @retval None
+  */
+void HAL_SYSTICK_IRQHandler(void)
+{
+  HAL_SYSTICK_Callback();
+}
+
+/**
+  * @brief  SYSTICK callback.
+  * @retval None
+  */
+__weak void HAL_SYSTICK_Callback(void)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_SYSTICK_Callback could be implemented in the user file
+   */
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#endif /* HAL_CORTEX_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

libs/STM32_HAL/src/stm32f4xx/stm32f4xx_hal_flash.c

@@ -0,0 +1,778 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_flash.c
+  * @author  MCD Application Team
+  * @brief   FLASH HAL module driver.
+  *          This file provides firmware functions to manage the following 
+  *          functionalities of the internal FLASH memory:
+  *           + Program operations functions
+  *           + Memory Control functions 
+  *           + Peripheral Errors functions
+  *         
+  @verbatim
+  ==============================================================================
+                        ##### FLASH peripheral features #####
+  ==============================================================================
+           
+  [..] The Flash memory interface manages CPU AHB I-Code and D-Code accesses 
+       to the Flash memory. It implements the erase and program Flash memory operations 
+       and the read and write protection mechanisms.
+      
+  [..] The Flash memory interface accelerates code execution with a system of instruction
+       prefetch and cache lines. 
+
+  [..] The FLASH main features are:
+      (+) Flash memory read operations
+      (+) Flash memory program/erase operations
+      (+) Read / write protections
+      (+) Prefetch on I-Code
+      (+) 64 cache lines of 128 bits on I-Code
+      (+) 8 cache lines of 128 bits on D-Code
+      
+      
+                     ##### How to use this driver #####
+  ==============================================================================
+    [..]                             
+      This driver provides functions and macros to configure and program the FLASH 
+      memory of all STM32F4xx devices.
+    
+      (#) FLASH Memory IO Programming functions: 
+           (++) Lock and Unlock the FLASH interface using HAL_FLASH_Unlock() and 
+                HAL_FLASH_Lock() functions
+           (++) Program functions: byte, half word, word and double word
+           (++) There Two modes of programming :
+            (+++) Polling mode using HAL_FLASH_Program() function
+            (+++) Interrupt mode using HAL_FLASH_Program_IT() function
+    
+      (#) Interrupts and flags management functions : 
+           (++) Handle FLASH interrupts by calling HAL_FLASH_IRQHandler()
+           (++) Wait for last FLASH operation according to its status
+           (++) Get error flag status by calling HAL_SetErrorCode()          
+
+    [..] 
+      In addition to these functions, this driver includes a set of macros allowing
+      to handle the following operations:
+       (+) Set the latency
+       (+) Enable/Disable the prefetch buffer
+       (+) Enable/Disable the Instruction cache and the Data cache
+       (+) Reset the Instruction cache and the Data cache
+       (+) Enable/Disable the FLASH interrupts
+       (+) Monitor the FLASH flags status
+          
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */ 
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup FLASH FLASH
+  * @brief FLASH HAL module driver
+  * @{
+  */
+
+#ifdef HAL_FLASH_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @addtogroup FLASH_Private_Constants
+  * @{
+  */
+#define FLASH_TIMEOUT_VALUE       50000U /* 50 s */
+/**
+  * @}
+  */         
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/** @addtogroup FLASH_Private_Variables
+  * @{
+  */
+/* Variable used for Erase sectors under interruption */
+FLASH_ProcessTypeDef pFlash;
+/**
+  * @}
+  */
+
+/* Private function prototypes -----------------------------------------------*/
+/** @addtogroup FLASH_Private_Functions
+  * @{
+  */
+/* Program operations */
+static void   FLASH_Program_DoubleWord(uint32_t Address, uint64_t Data);
+static void   FLASH_Program_Word(uint32_t Address, uint32_t Data);
+static void   FLASH_Program_HalfWord(uint32_t Address, uint16_t Data);
+static void   FLASH_Program_Byte(uint32_t Address, uint8_t Data);
+static void   FLASH_SetErrorCode(void);
+
+HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout);
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup FLASH_Exported_Functions FLASH Exported Functions
+  * @{
+  */
+  
+/** @defgroup FLASH_Exported_Functions_Group1 Programming operation functions 
+ *  @brief   Programming operation functions 
+ *
+@verbatim   
+ ===============================================================================
+                  ##### Programming operation functions #####
+ ===============================================================================  
+    [..]
+    This subsection provides a set of functions allowing to manage the FLASH 
+    program operations.
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Program byte, halfword, word or double word at a specified address
+  * @param  TypeProgram  Indicate the way to program at a specified address.
+  *                           This parameter can be a value of @ref FLASH_Type_Program
+  * @param  Address  specifies the address to be programmed.
+  * @param  Data specifies the data to be programmed
+  * 
+  * @retval HAL_StatusTypeDef HAL Status
+  */
+HAL_StatusTypeDef HAL_FLASH_Program(uint32_t TypeProgram, uint32_t Address, uint64_t Data)
+{
+  HAL_StatusTypeDef status = HAL_ERROR;
+  
+  /* Process Locked */
+  __HAL_LOCK(&pFlash);
+  
+  /* Check the parameters */
+  assert_param(IS_FLASH_TYPEPROGRAM(TypeProgram));
+  
+  /* Wait for last operation to be completed */
+  status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+  
+  if(status == HAL_OK)
+  {
+    if(TypeProgram == FLASH_TYPEPROGRAM_BYTE)
+    {
+      /*Program byte (8-bit) at a specified address.*/
+      FLASH_Program_Byte(Address, (uint8_t) Data);
+    }
+    else if(TypeProgram == FLASH_TYPEPROGRAM_HALFWORD)
+    {
+      /*Program halfword (16-bit) at a specified address.*/
+      FLASH_Program_HalfWord(Address, (uint16_t) Data);
+    }
+    else if(TypeProgram == FLASH_TYPEPROGRAM_WORD)
+    {
+      /*Program word (32-bit) at a specified address.*/
+      FLASH_Program_Word(Address, (uint32_t) Data);
+    }
+    else
+    {
+      /*Program double word (64-bit) at a specified address.*/
+      FLASH_Program_DoubleWord(Address, Data);
+    }
+    
+    /* Wait for last operation to be completed */
+    status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+    
+    /* If the program operation is completed, disable the PG Bit */
+    FLASH->CR &= (~FLASH_CR_PG);  
+  }
+  
+  /* Process Unlocked */
+  __HAL_UNLOCK(&pFlash);
+  
+  return status;
+}
+
+/**
+  * @brief   Program byte, halfword, word or double word at a specified address  with interrupt enabled.
+  * @param  TypeProgram  Indicate the way to program at a specified address.
+  *                           This parameter can be a value of @ref FLASH_Type_Program
+  * @param  Address  specifies the address to be programmed.
+  * @param  Data specifies the data to be programmed
+  * 
+  * @retval HAL Status
+  */
+HAL_StatusTypeDef HAL_FLASH_Program_IT(uint32_t TypeProgram, uint32_t Address, uint64_t Data)
+{
+  HAL_StatusTypeDef status = HAL_OK;
+  
+  /* Process Locked */
+  __HAL_LOCK(&pFlash);
+
+  /* Check the parameters */
+  assert_param(IS_FLASH_TYPEPROGRAM(TypeProgram));
+
+  /* Enable End of FLASH Operation interrupt */
+  __HAL_FLASH_ENABLE_IT(FLASH_IT_EOP);
+  
+  /* Enable Error source interrupt */
+  __HAL_FLASH_ENABLE_IT(FLASH_IT_ERR);
+
+  pFlash.ProcedureOnGoing = FLASH_PROC_PROGRAM;
+  pFlash.Address = Address;
+
+  if(TypeProgram == FLASH_TYPEPROGRAM_BYTE)
+  {
+    /*Program byte (8-bit) at a specified address.*/
+      FLASH_Program_Byte(Address, (uint8_t) Data);
+  }
+  else if(TypeProgram == FLASH_TYPEPROGRAM_HALFWORD)
+  {
+    /*Program halfword (16-bit) at a specified address.*/
+    FLASH_Program_HalfWord(Address, (uint16_t) Data);
+  }
+  else if(TypeProgram == FLASH_TYPEPROGRAM_WORD)
+  {
+    /*Program word (32-bit) at a specified address.*/
+    FLASH_Program_Word(Address, (uint32_t) Data);
+  }
+  else
+  {
+    /*Program double word (64-bit) at a specified address.*/
+    FLASH_Program_DoubleWord(Address, Data);
+  }
+
+  return status;
+}
+
+/**
+  * @brief This function handles FLASH interrupt request.
+  * @retval None
+  */
+void HAL_FLASH_IRQHandler(void)
+{
+  uint32_t addresstmp = 0U;
+  
+  /* Check FLASH operation error flags */
+#if defined(FLASH_SR_RDERR) 
+  if(__HAL_FLASH_GET_FLAG((FLASH_FLAG_OPERR | FLASH_FLAG_WRPERR | FLASH_FLAG_PGAERR | \
+    FLASH_FLAG_PGPERR | FLASH_FLAG_PGSERR | FLASH_FLAG_RDERR)) != RESET)
+#else
+  if(__HAL_FLASH_GET_FLAG((FLASH_FLAG_OPERR | FLASH_FLAG_WRPERR | FLASH_FLAG_PGAERR | \
+    FLASH_FLAG_PGPERR | FLASH_FLAG_PGSERR)) != RESET)
+#endif /* FLASH_SR_RDERR */
+  {
+    if(pFlash.ProcedureOnGoing == FLASH_PROC_SECTERASE)
+    {
+      /*return the faulty sector*/
+      addresstmp = pFlash.Sector;
+      pFlash.Sector = 0xFFFFFFFFU;
+    }
+    else if(pFlash.ProcedureOnGoing == FLASH_PROC_MASSERASE)
+    {
+      /*return the faulty bank*/
+      addresstmp = pFlash.Bank;
+    }
+    else
+    {
+      /*return the faulty address*/
+      addresstmp = pFlash.Address;
+    }
+    
+    /*Save the Error code*/
+    FLASH_SetErrorCode();
+    
+    /* FLASH error interrupt user callback */
+    HAL_FLASH_OperationErrorCallback(addresstmp);
+    
+    /*Stop the procedure ongoing*/
+    pFlash.ProcedureOnGoing = FLASH_PROC_NONE;
+  }
+  
+  /* Check FLASH End of Operation flag  */
+  if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_EOP) != RESET)
+  {
+    /* Clear FLASH End of Operation pending bit */
+    __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP);
+    
+    if(pFlash.ProcedureOnGoing == FLASH_PROC_SECTERASE)
+    {
+      /*Nb of sector to erased can be decreased*/
+      pFlash.NbSectorsToErase--;
+      
+      /* Check if there are still sectors to erase*/
+      if(pFlash.NbSectorsToErase != 0U)
+      {
+        addresstmp = pFlash.Sector;
+        /*Indicate user which sector has been erased*/
+        HAL_FLASH_EndOfOperationCallback(addresstmp);
+        
+        /*Increment sector number*/
+        pFlash.Sector++;
+        addresstmp = pFlash.Sector;
+        FLASH_Erase_Sector(addresstmp, pFlash.VoltageForErase);
+      }
+      else
+      {
+        /*No more sectors to Erase, user callback can be called.*/
+        /*Reset Sector and stop Erase sectors procedure*/
+        pFlash.Sector = addresstmp = 0xFFFFFFFFU;
+        pFlash.ProcedureOnGoing = FLASH_PROC_NONE;
+        
+        /* Flush the caches to be sure of the data consistency */
+        FLASH_FlushCaches() ;
+                
+        /* FLASH EOP interrupt user callback */
+        HAL_FLASH_EndOfOperationCallback(addresstmp);
+      }
+    }
+    else 
+    {
+      if(pFlash.ProcedureOnGoing == FLASH_PROC_MASSERASE) 
+      {
+        /* MassErase ended. Return the selected bank */
+        /* Flush the caches to be sure of the data consistency */
+        FLASH_FlushCaches() ;
+
+        /* FLASH EOP interrupt user callback */
+        HAL_FLASH_EndOfOperationCallback(pFlash.Bank);
+      }
+      else
+      {
+        /*Program ended. Return the selected address*/
+        /* FLASH EOP interrupt user callback */
+        HAL_FLASH_EndOfOperationCallback(pFlash.Address);
+      }
+      pFlash.ProcedureOnGoing = FLASH_PROC_NONE;
+    }
+  }
+  
+  if(pFlash.ProcedureOnGoing == FLASH_PROC_NONE)
+  {
+    /* Operation is completed, disable the PG, SER, SNB and MER Bits */
+    CLEAR_BIT(FLASH->CR, (FLASH_CR_PG | FLASH_CR_SER | FLASH_CR_SNB | FLASH_MER_BIT));
+
+    /* Disable End of FLASH Operation interrupt */
+    __HAL_FLASH_DISABLE_IT(FLASH_IT_EOP);
+    
+    /* Disable Error source interrupt */
+    __HAL_FLASH_DISABLE_IT(FLASH_IT_ERR);
+    
+    /* Process Unlocked */
+    __HAL_UNLOCK(&pFlash);
+  }
+}
+
+/**
+  * @brief  FLASH end of operation interrupt callback
+  * @param  ReturnValue The value saved in this parameter depends on the ongoing procedure
+  *                  Mass Erase: Bank number which has been requested to erase
+  *                  Sectors Erase: Sector which has been erased 
+  *                    (if 0xFFFFFFFFU, it means that all the selected sectors have been erased)
+  *                  Program: Address which was selected for data program
+  * @retval None
+  */
+__weak void HAL_FLASH_EndOfOperationCallback(uint32_t ReturnValue)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(ReturnValue);
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_FLASH_EndOfOperationCallback could be implemented in the user file
+   */ 
+}
+
+/**
+  * @brief  FLASH operation error interrupt callback
+  * @param  ReturnValue The value saved in this parameter depends on the ongoing procedure
+  *                 Mass Erase: Bank number which has been requested to erase
+  *                 Sectors Erase: Sector number which returned an error
+  *                 Program: Address which was selected for data program
+  * @retval None
+  */
+__weak void HAL_FLASH_OperationErrorCallback(uint32_t ReturnValue)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(ReturnValue);
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_FLASH_OperationErrorCallback could be implemented in the user file
+   */ 
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup FLASH_Exported_Functions_Group2 Peripheral Control functions 
+ *  @brief   management functions 
+ *
+@verbatim   
+ ===============================================================================
+                      ##### Peripheral Control functions #####
+ ===============================================================================  
+    [..]
+    This subsection provides a set of functions allowing to control the FLASH 
+    memory operations.
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Unlock the FLASH control register access
+  * @retval HAL Status
+  */
+HAL_StatusTypeDef HAL_FLASH_Unlock(void)
+{
+  HAL_StatusTypeDef status = HAL_OK;
+
+  if(READ_BIT(FLASH->CR, FLASH_CR_LOCK) != RESET)
+  {
+    /* Authorize the FLASH Registers access */
+    WRITE_REG(FLASH->KEYR, FLASH_KEY1);
+    WRITE_REG(FLASH->KEYR, FLASH_KEY2);
+
+    /* Verify Flash is unlocked */
+    if(READ_BIT(FLASH->CR, FLASH_CR_LOCK) != RESET)
+    {
+      status = HAL_ERROR;
+    }
+  }
+
+  return status;
+}
+
+/**
+  * @brief  Locks the FLASH control register access
+  * @retval HAL Status
+  */
+HAL_StatusTypeDef HAL_FLASH_Lock(void)
+{
+  /* Set the LOCK Bit to lock the FLASH Registers access */
+  FLASH->CR |= FLASH_CR_LOCK;
+  
+  return HAL_OK;  
+}
+
+/**
+  * @brief  Unlock the FLASH Option Control Registers access.
+  * @retval HAL Status
+  */
+HAL_StatusTypeDef HAL_FLASH_OB_Unlock(void)
+{
+  if((FLASH->OPTCR & FLASH_OPTCR_OPTLOCK) != RESET)
+  {
+    /* Authorizes the Option Byte register programming */
+    FLASH->OPTKEYR = FLASH_OPT_KEY1;
+    FLASH->OPTKEYR = FLASH_OPT_KEY2;
+  }
+  else
+  {
+    return HAL_ERROR;
+  }  
+  
+  return HAL_OK;  
+}
+
+/**
+  * @brief  Lock the FLASH Option Control Registers access.
+  * @retval HAL Status 
+  */
+HAL_StatusTypeDef HAL_FLASH_OB_Lock(void)
+{
+  /* Set the OPTLOCK Bit to lock the FLASH Option Byte Registers access */
+  FLASH->OPTCR |= FLASH_OPTCR_OPTLOCK;
+  
+  return HAL_OK;  
+}
+
+/**
+  * @brief  Launch the option byte loading.
+  * @retval HAL Status
+  */
+HAL_StatusTypeDef HAL_FLASH_OB_Launch(void)
+{
+  /* Set the OPTSTRT bit in OPTCR register */
+  *(__IO uint8_t *)OPTCR_BYTE0_ADDRESS |= FLASH_OPTCR_OPTSTRT;
+
+  /* Wait for last operation to be completed */
+  return(FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE)); 
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup FLASH_Exported_Functions_Group3 Peripheral State and Errors functions 
+ *  @brief   Peripheral Errors functions 
+ *
+@verbatim   
+ ===============================================================================
+                ##### Peripheral Errors functions #####
+ ===============================================================================  
+    [..]
+    This subsection permits to get in run-time Errors of the FLASH peripheral.
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Get the specific FLASH error flag.
+  * @retval FLASH_ErrorCode: The returned value can be a combination of:
+  *            @arg HAL_FLASH_ERROR_RD: FLASH Read Protection error flag (PCROP)
+  *            @arg HAL_FLASH_ERROR_PGS: FLASH Programming Sequence error flag 
+  *            @arg HAL_FLASH_ERROR_PGP: FLASH Programming Parallelism error flag  
+  *            @arg HAL_FLASH_ERROR_PGA: FLASH Programming Alignment error flag
+  *            @arg HAL_FLASH_ERROR_WRP: FLASH Write protected error flag
+  *            @arg HAL_FLASH_ERROR_OPERATION: FLASH operation Error flag 
+  */
+uint32_t HAL_FLASH_GetError(void)
+{ 
+   return pFlash.ErrorCode;
+}  
+  
+/**
+  * @}
+  */    
+
+/**
+  * @brief  Wait for a FLASH operation to complete.
+  * @param  Timeout maximum flash operationtimeout
+  * @retval HAL Status
+  */
+HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout)
+{ 
+  uint32_t tickstart = 0U;
+  
+  /* Clear Error Code */
+  pFlash.ErrorCode = HAL_FLASH_ERROR_NONE;
+  
+  /* Wait for the FLASH operation to complete by polling on BUSY flag to be reset.
+     Even if the FLASH operation fails, the BUSY flag will be reset and an error
+     flag will be set */
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+  while(__HAL_FLASH_GET_FLAG(FLASH_FLAG_BSY) != RESET) 
+  { 
+    if(Timeout != HAL_MAX_DELAY)
+    {
+      if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout))
+      {
+        return HAL_TIMEOUT;
+      }
+    } 
+  }
+
+  /* Check FLASH End of Operation flag  */
+  if (__HAL_FLASH_GET_FLAG(FLASH_FLAG_EOP) != RESET)
+  {
+    /* Clear FLASH End of Operation pending bit */
+    __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP);
+  }
+#if defined(FLASH_SR_RDERR)  
+  if(__HAL_FLASH_GET_FLAG((FLASH_FLAG_OPERR | FLASH_FLAG_WRPERR | FLASH_FLAG_PGAERR | \
+                           FLASH_FLAG_PGPERR | FLASH_FLAG_PGSERR | FLASH_FLAG_RDERR)) != RESET)
+#else
+  if(__HAL_FLASH_GET_FLAG((FLASH_FLAG_OPERR | FLASH_FLAG_WRPERR | FLASH_FLAG_PGAERR | \
+                           FLASH_FLAG_PGPERR | FLASH_FLAG_PGSERR)) != RESET)
+#endif /* FLASH_SR_RDERR */
+  {
+    /*Save the error code*/
+    FLASH_SetErrorCode();
+    return HAL_ERROR;
+  }
+
+  /* If there is no error flag set */
+  return HAL_OK;
+  
+}  
+
+/**
+  * @brief  Program a double word (64-bit) at a specified address.
+  * @note   This function must be used when the device voltage range is from
+  *         2.7V to 3.6V and Vpp in the range 7V to 9V.
+  *
+  * @note   If an erase and a program operations are requested simultaneously,    
+  *         the erase operation is performed before the program one.
+  *  
+  * @param  Address specifies the address to be programmed.
+  * @param  Data specifies the data to be programmed.
+  * @retval None
+  */
+static void FLASH_Program_DoubleWord(uint32_t Address, uint64_t Data)
+{
+  /* Check the parameters */
+  assert_param(IS_FLASH_ADDRESS(Address));
+  
+  /* If the previous operation is completed, proceed to program the new data */
+  CLEAR_BIT(FLASH->CR, FLASH_CR_PSIZE);
+  FLASH->CR |= FLASH_PSIZE_DOUBLE_WORD;
+  FLASH->CR |= FLASH_CR_PG;
+
+  /* Program first word */
+  *(__IO uint32_t*)Address = (uint32_t)Data;
+
+  /* Barrier to ensure programming is performed in 2 steps, in right order
+    (independently of compiler optimization behavior) */
+  __ISB();
+
+  /* Program second word */
+  *(__IO uint32_t*)(Address+4) = (uint32_t)(Data >> 32);
+}
+
+
+/**
+  * @brief  Program word (32-bit) at a specified address.
+  * @note   This function must be used when the device voltage range is from
+  *         2.7V to 3.6V.
+  *
+  * @note   If an erase and a program operations are requested simultaneously,    
+  *         the erase operation is performed before the program one.
+  *  
+  * @param  Address specifies the address to be programmed.
+  * @param  Data specifies the data to be programmed.
+  * @retval None
+  */
+static void FLASH_Program_Word(uint32_t Address, uint32_t Data)
+{
+  /* Check the parameters */
+  assert_param(IS_FLASH_ADDRESS(Address));
+  
+  /* If the previous operation is completed, proceed to program the new data */
+  CLEAR_BIT(FLASH->CR, FLASH_CR_PSIZE);
+  FLASH->CR |= FLASH_PSIZE_WORD;
+  FLASH->CR |= FLASH_CR_PG;
+
+  *(__IO uint32_t*)Address = Data;
+}
+
+/**
+  * @brief  Program a half-word (16-bit) at a specified address.
+  * @note   This function must be used when the device voltage range is from
+  *         2.1V to 3.6V.
+  *
+  * @note   If an erase and a program operations are requested simultaneously,    
+  *         the erase operation is performed before the program one.
+  *  
+  * @param  Address specifies the address to be programmed.
+  * @param  Data specifies the data to be programmed.
+  * @retval None
+  */
+static void FLASH_Program_HalfWord(uint32_t Address, uint16_t Data)
+{
+  /* Check the parameters */
+  assert_param(IS_FLASH_ADDRESS(Address));
+  
+  /* If the previous operation is completed, proceed to program the new data */
+  CLEAR_BIT(FLASH->CR, FLASH_CR_PSIZE);
+  FLASH->CR |= FLASH_PSIZE_HALF_WORD;
+  FLASH->CR |= FLASH_CR_PG;
+
+  *(__IO uint16_t*)Address = Data;
+}
+
+/**
+  * @brief  Program byte (8-bit) at a specified address.
+  * @note   This function must be used when the device voltage range is from
+  *         1.8V to 3.6V.
+  *
+  * @note   If an erase and a program operations are requested simultaneously,    
+  *         the erase operation is performed before the program one.
+  *  
+  * @param  Address specifies the address to be programmed.
+  * @param  Data specifies the data to be programmed.
+  * @retval None
+  */
+static void FLASH_Program_Byte(uint32_t Address, uint8_t Data)
+{
+  /* Check the parameters */
+  assert_param(IS_FLASH_ADDRESS(Address));
+  
+  /* If the previous operation is completed, proceed to program the new data */
+  CLEAR_BIT(FLASH->CR, FLASH_CR_PSIZE);
+  FLASH->CR |= FLASH_PSIZE_BYTE;
+  FLASH->CR |= FLASH_CR_PG;
+
+  *(__IO uint8_t*)Address = Data;
+}
+
+/**
+  * @brief  Set the specific FLASH error flag.
+  * @retval None
+  */
+static void FLASH_SetErrorCode(void)
+{ 
+  if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_WRPERR) != RESET)
+  {
+   pFlash.ErrorCode |= HAL_FLASH_ERROR_WRP;
+   
+   /* Clear FLASH write protection error pending bit */
+   __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_WRPERR);
+  }
+  
+  if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_PGAERR) != RESET)
+  {
+   pFlash.ErrorCode |= HAL_FLASH_ERROR_PGA;
+   
+   /* Clear FLASH Programming alignment error pending bit */
+   __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_PGAERR);
+  }
+  
+  if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_PGPERR) != RESET)
+  {
+    pFlash.ErrorCode |= HAL_FLASH_ERROR_PGP;
+    
+    /* Clear FLASH Programming parallelism error pending bit */
+    __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_PGPERR);
+  }
+  
+  if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_PGSERR) != RESET)
+  {
+    pFlash.ErrorCode |= HAL_FLASH_ERROR_PGS;
+    
+    /* Clear FLASH Programming sequence error pending bit */
+    __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_PGSERR);
+  }
+#if defined(FLASH_SR_RDERR) 
+  if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_RDERR) != RESET)
+  {
+    pFlash.ErrorCode |= HAL_FLASH_ERROR_RD;
+    
+    /* Clear FLASH Proprietary readout protection error pending bit */
+    __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_RDERR);
+  }
+#endif /* FLASH_SR_RDERR */  
+  if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_OPERR) != RESET)
+  {
+    pFlash.ErrorCode |= HAL_FLASH_ERROR_OPERATION;
+    
+    /* Clear FLASH Operation error pending bit */
+    __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_OPERR);
+  }
+}
+
+/**
+  * @}
+  */
+
+#endif /* HAL_FLASH_MODULE_ENABLED */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

libs/STM32_HAL/src/stm32f4xx/stm32f4xx_hal_gpio.c

@@ -0,0 +1,534 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_gpio.c
+  * @author  MCD Application Team
+  * @brief   GPIO HAL module driver.
+  *          This file provides firmware functions to manage the following 
+  *          functionalities of the General Purpose Input/Output (GPIO) peripheral:
+  *           + Initialization and de-initialization functions
+  *           + IO operation functions
+  *
+  @verbatim
+  ==============================================================================
+                    ##### GPIO Peripheral features #####
+  ==============================================================================
+  [..] 
+  Subject to the specific hardware characteristics of each I/O port listed in the datasheet, each
+  port bit of the General Purpose IO (GPIO) Ports, can be individually configured by software
+  in several modes:
+  (+) Input mode 
+  (+) Analog mode
+  (+) Output mode
+  (+) Alternate function mode
+  (+) External interrupt/event lines
+
+  [..]  
+  During and just after reset, the alternate functions and external interrupt  
+  lines are not active and the I/O ports are configured in input floating mode.
+  
+  [..]   
+  All GPIO pins have weak internal pull-up and pull-down resistors, which can be 
+  activated or not.
+
+  [..]
+  In Output or Alternate mode, each IO can be configured on open-drain or push-pull
+  type and the IO speed can be selected depending on the VDD value.
+
+  [..]  
+  All ports have external interrupt/event capability. To use external interrupt 
+  lines, the port must be configured in input mode. All available GPIO pins are 
+  connected to the 16 external interrupt/event lines from EXTI0 to EXTI15.
+  
+  [..]
+  The external interrupt/event controller consists of up to 23 edge detectors 
+  (16 lines are connected to GPIO) for generating event/interrupt requests (each 
+  input line can be independently configured to select the type (interrupt or event) 
+  and the corresponding trigger event (rising or falling or both). Each line can 
+  also be masked independently. 
+
+                     ##### How to use this driver #####
+  ==============================================================================  
+  [..]
+    (#) Enable the GPIO AHB clock using the following function: __HAL_RCC_GPIOx_CLK_ENABLE(). 
+
+    (#) Configure the GPIO pin(s) using HAL_GPIO_Init().
+        (++) Configure the IO mode using "Mode" member from GPIO_InitTypeDef structure
+        (++) Activate Pull-up, Pull-down resistor using "Pull" member from GPIO_InitTypeDef 
+             structure.
+        (++) In case of Output or alternate function mode selection: the speed is 
+             configured through "Speed" member from GPIO_InitTypeDef structure.
+        (++) In alternate mode is selection, the alternate function connected to the IO
+             is configured through "Alternate" member from GPIO_InitTypeDef structure.
+        (++) Analog mode is required when a pin is to be used as ADC channel 
+             or DAC output.
+        (++) In case of external interrupt/event selection the "Mode" member from 
+             GPIO_InitTypeDef structure select the type (interrupt or event) and 
+             the corresponding trigger event (rising or falling or both).
+
+    (#) In case of external interrupt/event mode selection, configure NVIC IRQ priority 
+        mapped to the EXTI line using HAL_NVIC_SetPriority() and enable it using
+        HAL_NVIC_EnableIRQ().
+         
+    (#) To get the level of a pin configured in input mode use HAL_GPIO_ReadPin().
+            
+    (#) To set/reset the level of a pin configured in output mode use 
+        HAL_GPIO_WritePin()/HAL_GPIO_TogglePin().
+    
+    (#) To lock pin configuration until next reset use HAL_GPIO_LockPin().
+
+                 
+    (#) During and just after reset, the alternate functions are not 
+        active and the GPIO pins are configured in input floating mode (except JTAG
+        pins).
+  
+    (#) The LSE oscillator pins OSC32_IN and OSC32_OUT can be used as general purpose 
+        (PC14 and PC15, respectively) when the LSE oscillator is off. The LSE has 
+        priority over the GPIO function.
+  
+    (#) The HSE oscillator pins OSC_IN/OSC_OUT can be used as 
+        general purpose PH0 and PH1, respectively, when the HSE oscillator is off. 
+        The HSE has priority over the GPIO function.
+  
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */ 
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup GPIO GPIO
+  * @brief GPIO HAL module driver
+  * @{
+  */
+
+#ifdef HAL_GPIO_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @addtogroup GPIO_Private_Constants GPIO Private Constants
+  * @{
+  */
+
+#define GPIO_NUMBER           16U
+/**
+  * @}
+  */
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup GPIO_Exported_Functions GPIO Exported Functions
+  * @{
+  */
+
+/** @defgroup GPIO_Exported_Functions_Group1 Initialization and de-initialization functions
+  *  @brief    Initialization and Configuration functions
+  *
+@verbatim    
+ ===============================================================================
+              ##### Initialization and de-initialization functions #####
+ ===============================================================================
+  [..]
+    This section provides functions allowing to initialize and de-initialize the GPIOs
+    to be ready for use.
+ 
+@endverbatim
+  * @{
+  */
+
+
+/**
+  * @brief  Initializes the GPIOx peripheral according to the specified parameters in the GPIO_Init.
+  * @param  GPIOx where x can be (A..K) to select the GPIO peripheral for STM32F429X device or
+  *                      x can be (A..I) to select the GPIO peripheral for STM32F40XX and STM32F427X devices.
+  * @param  GPIO_Init pointer to a GPIO_InitTypeDef structure that contains
+  *         the configuration information for the specified GPIO peripheral.
+  * @retval None
+  */
+void HAL_GPIO_Init(GPIO_TypeDef  *GPIOx, GPIO_InitTypeDef *GPIO_Init)
+{
+  uint32_t position;
+  uint32_t ioposition = 0x00U;
+  uint32_t iocurrent = 0x00U;
+  uint32_t temp = 0x00U;
+
+  /* Check the parameters */
+  assert_param(IS_GPIO_ALL_INSTANCE(GPIOx));
+  assert_param(IS_GPIO_PIN(GPIO_Init->Pin));
+  assert_param(IS_GPIO_MODE(GPIO_Init->Mode));
+
+  /* Configure the port pins */
+  for(position = 0U; position < GPIO_NUMBER; position++)
+  {
+    /* Get the IO position */
+    ioposition = 0x01U << position;
+    /* Get the current IO position */
+    iocurrent = (uint32_t)(GPIO_Init->Pin) & ioposition;
+
+    if(iocurrent == ioposition)
+    {
+      /*--------------------- GPIO Mode Configuration ------------------------*/
+      /* In case of Output or Alternate function mode selection */
+      if(((GPIO_Init->Mode & GPIO_MODE) == MODE_OUTPUT) || \
+          (GPIO_Init->Mode & GPIO_MODE) == MODE_AF)
+      {
+        /* Check the Speed parameter */
+        assert_param(IS_GPIO_SPEED(GPIO_Init->Speed));
+        /* Configure the IO Speed */
+        temp = GPIOx->OSPEEDR; 
+        temp &= ~(GPIO_OSPEEDER_OSPEEDR0 << (position * 2U));
+        temp |= (GPIO_Init->Speed << (position * 2U));
+        GPIOx->OSPEEDR = temp;
+
+        /* Configure the IO Output Type */
+        temp = GPIOx->OTYPER;
+        temp &= ~(GPIO_OTYPER_OT_0 << position) ;
+        temp |= (((GPIO_Init->Mode & OUTPUT_TYPE) >> OUTPUT_TYPE_Pos) << position);
+        GPIOx->OTYPER = temp;
+       }
+
+      if((GPIO_Init->Mode & GPIO_MODE) != MODE_ANALOG)
+      {
+        /* Check the parameters */
+        assert_param(IS_GPIO_PULL(GPIO_Init->Pull));
+        
+        /* Activate the Pull-up or Pull down resistor for the current IO */
+        temp = GPIOx->PUPDR;
+        temp &= ~(GPIO_PUPDR_PUPDR0 << (position * 2U));
+        temp |= ((GPIO_Init->Pull) << (position * 2U));
+        GPIOx->PUPDR = temp;
+      }
+
+      /* In case of Alternate function mode selection */
+      if((GPIO_Init->Mode & GPIO_MODE) == MODE_AF)
+      {
+        /* Check the Alternate function parameter */
+        assert_param(IS_GPIO_AF(GPIO_Init->Alternate));
+        /* Configure Alternate function mapped with the current IO */
+        temp = GPIOx->AFR[position >> 3U];
+        temp &= ~(0xFU << ((uint32_t)(position & 0x07U) * 4U)) ;
+        temp |= ((uint32_t)(GPIO_Init->Alternate) << (((uint32_t)position & 0x07U) * 4U));
+        GPIOx->AFR[position >> 3U] = temp;
+      }
+
+      /* Configure IO Direction mode (Input, Output, Alternate or Analog) */
+      temp = GPIOx->MODER;
+      temp &= ~(GPIO_MODER_MODER0 << (position * 2U));
+      temp |= ((GPIO_Init->Mode & GPIO_MODE) << (position * 2U));
+      GPIOx->MODER = temp;
+
+      /*--------------------- EXTI Mode Configuration ------------------------*/
+      /* Configure the External Interrupt or event for the current IO */
+      if((GPIO_Init->Mode & EXTI_MODE) != 0x00U)
+      {
+        /* Enable SYSCFG Clock */
+        __HAL_RCC_SYSCFG_CLK_ENABLE();
+
+        temp = SYSCFG->EXTICR[position >> 2U];
+        temp &= ~(0x0FU << (4U * (position & 0x03U)));
+        temp |= ((uint32_t)(GPIO_GET_INDEX(GPIOx)) << (4U * (position & 0x03U)));
+        SYSCFG->EXTICR[position >> 2U] = temp;
+
+        /* Clear EXTI line configuration */
+        temp = EXTI->IMR;
+        temp &= ~((uint32_t)iocurrent);
+        if((GPIO_Init->Mode & EXTI_IT) != 0x00U)
+        {
+          temp |= iocurrent;
+        }
+        EXTI->IMR = temp;
+
+        temp = EXTI->EMR;
+        temp &= ~((uint32_t)iocurrent);
+        if((GPIO_Init->Mode & EXTI_EVT) != 0x00U)
+        {
+          temp |= iocurrent;
+        }
+        EXTI->EMR = temp;
+
+        /* Clear Rising Falling edge configuration */
+        temp = EXTI->RTSR;
+        temp &= ~((uint32_t)iocurrent);
+        if((GPIO_Init->Mode & TRIGGER_RISING) != 0x00U)
+        {
+          temp |= iocurrent;
+        }
+        EXTI->RTSR = temp;
+
+        temp = EXTI->FTSR;
+        temp &= ~((uint32_t)iocurrent);
+        if((GPIO_Init->Mode & TRIGGER_FALLING) != 0x00U)
+        {
+          temp |= iocurrent;
+        }
+        EXTI->FTSR = temp;
+      }
+    }
+  }
+}
+
+/**
+  * @brief  De-initializes the GPIOx peripheral registers to their default reset values.
+  * @param  GPIOx where x can be (A..K) to select the GPIO peripheral for STM32F429X device or
+  *                      x can be (A..I) to select the GPIO peripheral for STM32F40XX and STM32F427X devices.
+  * @param  GPIO_Pin specifies the port bit to be written.
+  *          This parameter can be one of GPIO_PIN_x where x can be (0..15).
+  * @retval None
+  */
+void HAL_GPIO_DeInit(GPIO_TypeDef  *GPIOx, uint32_t GPIO_Pin)
+{
+  uint32_t position;
+  uint32_t ioposition = 0x00U;
+  uint32_t iocurrent = 0x00U;
+  uint32_t tmp = 0x00U;
+
+  /* Check the parameters */
+  assert_param(IS_GPIO_ALL_INSTANCE(GPIOx));
+  
+  /* Configure the port pins */
+  for(position = 0U; position < GPIO_NUMBER; position++)
+  {
+    /* Get the IO position */
+    ioposition = 0x01U << position;
+    /* Get the current IO position */
+    iocurrent = (GPIO_Pin) & ioposition;
+
+    if(iocurrent == ioposition)
+    {
+      /*------------------------- EXTI Mode Configuration --------------------*/
+      tmp = SYSCFG->EXTICR[position >> 2U];
+      tmp &= (0x0FU << (4U * (position & 0x03U)));
+      if(tmp == ((uint32_t)(GPIO_GET_INDEX(GPIOx)) << (4U * (position & 0x03U))))
+      {
+        /* Clear EXTI line configuration */
+        EXTI->IMR &= ~((uint32_t)iocurrent);
+        EXTI->EMR &= ~((uint32_t)iocurrent);
+        
+        /* Clear Rising Falling edge configuration */
+        EXTI->RTSR &= ~((uint32_t)iocurrent);
+        EXTI->FTSR &= ~((uint32_t)iocurrent);
+
+        /* Configure the External Interrupt or event for the current IO */
+        tmp = 0x0FU << (4U * (position & 0x03U));
+        SYSCFG->EXTICR[position >> 2U] &= ~tmp;
+      }
+
+      /*------------------------- GPIO Mode Configuration --------------------*/
+      /* Configure IO Direction in Input Floating Mode */
+      GPIOx->MODER &= ~(GPIO_MODER_MODER0 << (position * 2U));
+
+      /* Configure the default Alternate Function in current IO */
+      GPIOx->AFR[position >> 3U] &= ~(0xFU << ((uint32_t)(position & 0x07U) * 4U)) ;
+
+      /* Deactivate the Pull-up and Pull-down resistor for the current IO */
+      GPIOx->PUPDR &= ~(GPIO_PUPDR_PUPDR0 << (position * 2U));
+
+      /* Configure the default value IO Output Type */
+      GPIOx->OTYPER  &= ~(GPIO_OTYPER_OT_0 << position) ;
+
+      /* Configure the default value for IO Speed */
+      GPIOx->OSPEEDR &= ~(GPIO_OSPEEDER_OSPEEDR0 << (position * 2U));
+    }
+  }
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup GPIO_Exported_Functions_Group2 IO operation functions 
+  *  @brief   GPIO Read and Write
+  *
+@verbatim
+ ===============================================================================
+                       ##### IO operation functions #####
+ ===============================================================================
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Reads the specified input port pin.
+  * @param  GPIOx where x can be (A..K) to select the GPIO peripheral for STM32F429X device or
+  *                      x can be (A..I) to select the GPIO peripheral for STM32F40XX and STM32F427X devices.
+  * @param  GPIO_Pin specifies the port bit to read.
+  *         This parameter can be GPIO_PIN_x where x can be (0..15).
+  * @retval The input port pin value.
+  */
+GPIO_PinState HAL_GPIO_ReadPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin)
+{
+  GPIO_PinState bitstatus;
+
+  /* Check the parameters */
+  assert_param(IS_GPIO_PIN(GPIO_Pin));
+
+  if((GPIOx->IDR & GPIO_Pin) != (uint32_t)GPIO_PIN_RESET)
+  {
+    bitstatus = GPIO_PIN_SET;
+  }
+  else
+  {
+    bitstatus = GPIO_PIN_RESET;
+  }
+  return bitstatus;
+}
+
+/**
+  * @brief  Sets or clears the selected data port bit.
+  *
+  * @note   This function uses GPIOx_BSRR register to allow atomic read/modify
+  *         accesses. In this way, there is no risk of an IRQ occurring between
+  *         the read and the modify access.
+  *
+  * @param  GPIOx where x can be (A..K) to select the GPIO peripheral for STM32F429X device or
+  *                      x can be (A..I) to select the GPIO peripheral for STM32F40XX and STM32F427X devices.
+  * @param  GPIO_Pin specifies the port bit to be written.
+  *          This parameter can be one of GPIO_PIN_x where x can be (0..15).
+  * @param  PinState specifies the value to be written to the selected bit.
+  *          This parameter can be one of the GPIO_PinState enum values:
+  *            @arg GPIO_PIN_RESET: to clear the port pin
+  *            @arg GPIO_PIN_SET: to set the port pin
+  * @retval None
+  */
+void HAL_GPIO_WritePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState)
+{
+  /* Check the parameters */
+  assert_param(IS_GPIO_PIN(GPIO_Pin));
+  assert_param(IS_GPIO_PIN_ACTION(PinState));
+
+  if(PinState != GPIO_PIN_RESET)
+  {
+    GPIOx->BSRR = GPIO_Pin;
+  }
+  else
+  {
+    GPIOx->BSRR = (uint32_t)GPIO_Pin << 16U;
+  }
+}
+
+/**
+  * @brief  Toggles the specified GPIO pins.
+  * @param  GPIOx Where x can be (A..K) to select the GPIO peripheral for STM32F429X device or
+  *                      x can be (A..I) to select the GPIO peripheral for STM32F40XX and STM32F427X devices.
+  * @param  GPIO_Pin Specifies the pins to be toggled.
+  * @retval None
+  */
+void HAL_GPIO_TogglePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin)
+{
+  uint32_t odr;
+
+  /* Check the parameters */
+  assert_param(IS_GPIO_PIN(GPIO_Pin));
+
+  /* get current Ouput Data Register value */
+  odr = GPIOx->ODR;
+
+  /* Set selected pins that were at low level, and reset ones that were high */
+  GPIOx->BSRR = ((odr & GPIO_Pin) << GPIO_NUMBER) | (~odr & GPIO_Pin);
+}
+
+/**
+  * @brief  Locks GPIO Pins configuration registers.
+  * @note   The locked registers are GPIOx_MODER, GPIOx_OTYPER, GPIOx_OSPEEDR,
+  *         GPIOx_PUPDR, GPIOx_AFRL and GPIOx_AFRH.
+  * @note   The configuration of the locked GPIO pins can no longer be modified
+  *         until the next reset.
+  * @param  GPIOx where x can be (A..F) to select the GPIO peripheral for STM32F4 family
+  * @param  GPIO_Pin specifies the port bit to be locked.
+  *         This parameter can be any combination of GPIO_PIN_x where x can be (0..15).
+  * @retval None
+  */
+HAL_StatusTypeDef HAL_GPIO_LockPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin)
+{
+  __IO uint32_t tmp = GPIO_LCKR_LCKK;
+
+  /* Check the parameters */
+  assert_param(IS_GPIO_PIN(GPIO_Pin));
+
+  /* Apply lock key write sequence */
+  tmp |= GPIO_Pin;
+  /* Set LCKx bit(s): LCKK='1' + LCK[15-0] */
+  GPIOx->LCKR = tmp;
+  /* Reset LCKx bit(s): LCKK='0' + LCK[15-0] */
+  GPIOx->LCKR = GPIO_Pin;
+  /* Set LCKx bit(s): LCKK='1' + LCK[15-0] */
+  GPIOx->LCKR = tmp;
+  /* Read LCKR register. This read is mandatory to complete key lock sequence */
+  tmp = GPIOx->LCKR;
+
+  /* Read again in order to confirm lock is active */
+ if((GPIOx->LCKR & GPIO_LCKR_LCKK) != RESET)
+  {
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_ERROR;
+  }
+}
+
+/**
+  * @brief  This function handles EXTI interrupt request.
+  * @param  GPIO_Pin Specifies the pins connected EXTI line
+  * @retval None
+  */
+void HAL_GPIO_EXTI_IRQHandler(uint16_t GPIO_Pin)
+{
+  /* EXTI line interrupt detected */
+  if(__HAL_GPIO_EXTI_GET_IT(GPIO_Pin) != RESET)
+  {
+    __HAL_GPIO_EXTI_CLEAR_IT(GPIO_Pin);
+    HAL_GPIO_EXTI_Callback(GPIO_Pin);
+  }
+}
+
+/**
+  * @brief  EXTI line detection callbacks.
+  * @param  GPIO_Pin Specifies the pins connected EXTI line
+  * @retval None
+  */
+__weak void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(GPIO_Pin);
+  /* NOTE: This function Should not be modified, when the callback is needed,
+           the HAL_GPIO_EXTI_Callback could be implemented in the user file
+   */
+}
+
+/**
+  * @}
+  */
+
+
+/**
+  * @}
+  */
+
+#endif /* HAL_GPIO_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

libs/STM32_HAL/src/stm32f4xx/stm32f4xx_hal_pcd_ex.c

@@ -0,0 +1,348 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_pcd_ex.c
+  * @author  MCD Application Team
+  * @brief   PCD Extended HAL module driver.
+  *          This file provides firmware functions to manage the following
+  *          functionalities of the USB Peripheral Controller:
+  *           + Extended features functions
+  *
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup PCDEx PCDEx
+  * @brief PCD Extended HAL module driver
+  * @{
+  */
+
+#ifdef HAL_PCD_MODULE_ENABLED
+
+#if defined (USB_OTG_FS) || defined (USB_OTG_HS)
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+
+/** @defgroup PCDEx_Exported_Functions PCDEx Exported Functions
+  * @{
+  */
+
+/** @defgroup PCDEx_Exported_Functions_Group1 Peripheral Control functions
+  * @brief    PCDEx control functions
+  *
+@verbatim
+ ===============================================================================
+                 ##### Extended features functions #####
+ ===============================================================================
+    [..]  This section provides functions allowing to:
+      (+) Update FIFO configuration
+
+@endverbatim
+  * @{
+  */
+#if defined (USB_OTG_FS) || defined (USB_OTG_HS)
+/**
+  * @brief  Set Tx FIFO
+  * @param  hpcd PCD handle
+  * @param  fifo The number of Tx fifo
+  * @param  size Fifo size
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_PCDEx_SetTxFiFo(PCD_HandleTypeDef *hpcd, uint8_t fifo, uint16_t size)
+{
+  uint8_t i;
+  uint32_t Tx_Offset;
+
+  /*  TXn min size = 16 words. (n  : Transmit FIFO index)
+      When a TxFIFO is not used, the Configuration should be as follows:
+          case 1 :  n > m    and Txn is not used    (n,m  : Transmit FIFO indexes)
+         --> Txm can use the space allocated for Txn.
+         case2  :  n < m    and Txn is not used    (n,m  : Transmit FIFO indexes)
+         --> Txn should be configured with the minimum space of 16 words
+     The FIFO is used optimally when used TxFIFOs are allocated in the top
+         of the FIFO.Ex: use EP1 and EP2 as IN instead of EP1 and EP3 as IN ones.
+     When DMA is used 3n * FIFO locations should be reserved for internal DMA registers */
+
+  Tx_Offset = hpcd->Instance->GRXFSIZ;
+
+  if (fifo == 0U)
+  {
+    hpcd->Instance->DIEPTXF0_HNPTXFSIZ = ((uint32_t)size << 16) | Tx_Offset;
+  }
+  else
+  {
+    Tx_Offset += (hpcd->Instance->DIEPTXF0_HNPTXFSIZ) >> 16;
+    for (i = 0U; i < (fifo - 1U); i++)
+    {
+      Tx_Offset += (hpcd->Instance->DIEPTXF[i] >> 16);
+    }
+
+    /* Multiply Tx_Size by 2 to get higher performance */
+    hpcd->Instance->DIEPTXF[fifo - 1U] = ((uint32_t)size << 16) | Tx_Offset;
+  }
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Set Rx FIFO
+  * @param  hpcd PCD handle
+  * @param  size Size of Rx fifo
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_PCDEx_SetRxFiFo(PCD_HandleTypeDef *hpcd, uint16_t size)
+{
+  hpcd->Instance->GRXFSIZ = size;
+
+  return HAL_OK;
+}
+#if defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx)
+/**
+  * @brief  Activate LPM feature.
+  * @param  hpcd PCD handle
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_PCDEx_ActivateLPM(PCD_HandleTypeDef *hpcd)
+{
+  USB_OTG_GlobalTypeDef *USBx = hpcd->Instance;
+
+  hpcd->lpm_active = 1U;
+  hpcd->LPM_State = LPM_L0;
+  USBx->GINTMSK |= USB_OTG_GINTMSK_LPMINTM;
+  USBx->GLPMCFG |= (USB_OTG_GLPMCFG_LPMEN | USB_OTG_GLPMCFG_LPMACK | USB_OTG_GLPMCFG_ENBESL);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Deactivate LPM feature.
+  * @param  hpcd PCD handle
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_PCDEx_DeActivateLPM(PCD_HandleTypeDef *hpcd)
+{
+  USB_OTG_GlobalTypeDef *USBx = hpcd->Instance;
+
+  hpcd->lpm_active = 0U;
+  USBx->GINTMSK &= ~USB_OTG_GINTMSK_LPMINTM;
+  USBx->GLPMCFG &= ~(USB_OTG_GLPMCFG_LPMEN | USB_OTG_GLPMCFG_LPMACK | USB_OTG_GLPMCFG_ENBESL);
+
+  return HAL_OK;
+}
+#endif /* defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) */
+#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx)
+/**
+  * @brief  Handle BatteryCharging Process.
+  * @param  hpcd PCD handle
+  * @retval HAL status
+  */
+void HAL_PCDEx_BCD_VBUSDetect(PCD_HandleTypeDef *hpcd)
+{
+  USB_OTG_GlobalTypeDef *USBx = hpcd->Instance;
+  uint32_t tickstart = HAL_GetTick();
+
+  /* Enable DCD : Data Contact Detect */
+  USBx->GCCFG |= USB_OTG_GCCFG_DCDEN;
+
+  /* Wait Detect flag or a timeout is happen */
+  while ((USBx->GCCFG & USB_OTG_GCCFG_DCDET) == 0U)
+  {
+    /* Check for the Timeout */
+    if ((HAL_GetTick() - tickstart) > 1000U)
+    {
+#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U)
+      hpcd->BCDCallback(hpcd, PCD_BCD_ERROR);
+#else
+      HAL_PCDEx_BCD_Callback(hpcd, PCD_BCD_ERROR);
+#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */
+
+      return;
+    }
+  }
+
+  /* Right response got */
+  HAL_Delay(200U);
+
+  /* Check Detect flag*/
+  if ((USBx->GCCFG & USB_OTG_GCCFG_DCDET) == USB_OTG_GCCFG_DCDET)
+  {
+#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U)
+    hpcd->BCDCallback(hpcd, PCD_BCD_CONTACT_DETECTION);
+#else
+    HAL_PCDEx_BCD_Callback(hpcd, PCD_BCD_CONTACT_DETECTION);
+#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */
+  }
+
+  /*Primary detection: checks if connected to Standard Downstream Port
+  (without charging capability) */
+  USBx->GCCFG &= ~ USB_OTG_GCCFG_DCDEN;
+  HAL_Delay(50U);
+  USBx->GCCFG |=  USB_OTG_GCCFG_PDEN;
+  HAL_Delay(50U);
+
+  if ((USBx->GCCFG & USB_OTG_GCCFG_PDET) == 0U)
+  {
+    /* Case of Standard Downstream Port */
+#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U)
+    hpcd->BCDCallback(hpcd, PCD_BCD_STD_DOWNSTREAM_PORT);
+#else
+    HAL_PCDEx_BCD_Callback(hpcd, PCD_BCD_STD_DOWNSTREAM_PORT);
+#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */
+  }
+  else
+  {
+    /* start secondary detection to check connection to Charging Downstream
+    Port or Dedicated Charging Port */
+    USBx->GCCFG &= ~ USB_OTG_GCCFG_PDEN;
+    HAL_Delay(50U);
+    USBx->GCCFG |=  USB_OTG_GCCFG_SDEN;
+    HAL_Delay(50U);
+
+    if ((USBx->GCCFG & USB_OTG_GCCFG_SDET) == USB_OTG_GCCFG_SDET)
+    {
+      /* case Dedicated Charging Port  */
+#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U)
+      hpcd->BCDCallback(hpcd, PCD_BCD_DEDICATED_CHARGING_PORT);
+#else
+      HAL_PCDEx_BCD_Callback(hpcd, PCD_BCD_DEDICATED_CHARGING_PORT);
+#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */
+    }
+    else
+    {
+      /* case Charging Downstream Port  */
+#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U)
+      hpcd->BCDCallback(hpcd, PCD_BCD_CHARGING_DOWNSTREAM_PORT);
+#else
+      HAL_PCDEx_BCD_Callback(hpcd, PCD_BCD_CHARGING_DOWNSTREAM_PORT);
+#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */
+    }
+  }
+
+  /* Battery Charging capability discovery finished */
+  (void)HAL_PCDEx_DeActivateBCD(hpcd);
+
+#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U)
+  hpcd->BCDCallback(hpcd, PCD_BCD_DISCOVERY_COMPLETED);
+#else
+  HAL_PCDEx_BCD_Callback(hpcd, PCD_BCD_DISCOVERY_COMPLETED);
+#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */
+}
+
+/**
+  * @brief  Activate BatteryCharging feature.
+  * @param  hpcd PCD handle
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_PCDEx_ActivateBCD(PCD_HandleTypeDef *hpcd)
+{
+  USB_OTG_GlobalTypeDef *USBx = hpcd->Instance;
+
+  USBx->GCCFG &= ~(USB_OTG_GCCFG_PDEN);
+  USBx->GCCFG &= ~(USB_OTG_GCCFG_SDEN);
+
+  /* Power Down USB transceiver  */
+  USBx->GCCFG &= ~(USB_OTG_GCCFG_PWRDWN);
+
+  /* Enable Battery charging */
+  USBx->GCCFG |= USB_OTG_GCCFG_BCDEN;
+
+  hpcd->battery_charging_active = 1U;
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Deactivate BatteryCharging feature.
+  * @param  hpcd PCD handle
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_PCDEx_DeActivateBCD(PCD_HandleTypeDef *hpcd)
+{
+  USB_OTG_GlobalTypeDef *USBx = hpcd->Instance;
+
+  USBx->GCCFG &= ~(USB_OTG_GCCFG_SDEN);
+  USBx->GCCFG &= ~(USB_OTG_GCCFG_PDEN);
+
+  /* Disable Battery charging */
+  USBx->GCCFG &= ~(USB_OTG_GCCFG_BCDEN);
+
+  hpcd->battery_charging_active = 0U;
+
+  return HAL_OK;
+}
+#endif /* defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) */
+#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */
+
+/**
+  * @brief  Send LPM message to user layer callback.
+  * @param  hpcd PCD handle
+  * @param  msg LPM message
+  * @retval HAL status
+  */
+__weak void HAL_PCDEx_LPM_Callback(PCD_HandleTypeDef *hpcd, PCD_LPM_MsgTypeDef msg)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hpcd);
+  UNUSED(msg);
+
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_PCDEx_LPM_Callback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Send BatteryCharging message to user layer callback.
+  * @param  hpcd PCD handle
+  * @param  msg LPM message
+  * @retval HAL status
+  */
+__weak void HAL_PCDEx_BCD_Callback(PCD_HandleTypeDef *hpcd, PCD_BCD_MsgTypeDef msg)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hpcd);
+  UNUSED(msg);
+
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_PCDEx_BCD_Callback could be implemented in the user file
+   */
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */
+#endif /* HAL_PCD_MODULE_ENABLED */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

libs/STM32_HAL/src/stm32f4xx/stm32f4xx_hal_pwr.c

@@ -0,0 +1,575 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_pwr.c
+  * @author  MCD Application Team
+  * @brief   PWR HAL module driver.
+  *          This file provides firmware functions to manage the following 
+  *          functionalities of the Power Controller (PWR) peripheral:
+  *           + Initialization and de-initialization functions
+  *           + Peripheral Control functions 
+  *         
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */ 
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup PWR PWR
+  * @brief PWR HAL module driver
+  * @{
+  */
+
+#ifdef HAL_PWR_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @addtogroup PWR_Private_Constants
+  * @{
+  */
+  
+/** @defgroup PWR_PVD_Mode_Mask PWR PVD Mode Mask
+  * @{
+  */     
+#define PVD_MODE_IT               0x00010000U
+#define PVD_MODE_EVT              0x00020000U
+#define PVD_RISING_EDGE           0x00000001U
+#define PVD_FALLING_EDGE          0x00000002U
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */    
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+
+/** @defgroup PWR_Exported_Functions PWR Exported Functions
+  * @{
+  */
+
+/** @defgroup PWR_Exported_Functions_Group1 Initialization and de-initialization functions 
+  *  @brief    Initialization and de-initialization functions
+  *
+@verbatim
+ ===============================================================================
+              ##### Initialization and de-initialization functions #####
+ ===============================================================================
+    [..]
+      After reset, the backup domain (RTC registers, RTC backup data 
+      registers and backup SRAM) is protected against possible unwanted 
+      write accesses. 
+      To enable access to the RTC Domain and RTC registers, proceed as follows:
+        (+) Enable the Power Controller (PWR) APB1 interface clock using the
+            __HAL_RCC_PWR_CLK_ENABLE() macro.
+        (+) Enable access to RTC domain using the HAL_PWR_EnableBkUpAccess() function.
+ 
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief Deinitializes the HAL PWR peripheral registers to their default reset values.
+  * @retval None
+  */
+void HAL_PWR_DeInit(void)
+{
+  __HAL_RCC_PWR_FORCE_RESET();
+  __HAL_RCC_PWR_RELEASE_RESET();
+}
+
+/**
+  * @brief Enables access to the backup domain (RTC registers, RTC 
+  *         backup data registers and backup SRAM).
+  * @note If the HSE divided by 2, 3, ..31 is used as the RTC clock, the 
+  *         Backup Domain Access should be kept enabled.
+  * @note The following sequence is required to bypass the delay between
+  *         DBP bit programming and the effective enabling  of the backup domain.
+  *         Please check the Errata Sheet for more details under "Possible delay
+  *         in backup domain protection disabling/enabling after programming the
+  *         DBP bit" section.
+  * @retval None
+  */
+void HAL_PWR_EnableBkUpAccess(void)
+{
+  __IO uint32_t dummyread;
+  *(__IO uint32_t *) CR_DBP_BB = (uint32_t)ENABLE;
+  dummyread = PWR->CR;
+  UNUSED(dummyread);
+}
+
+/**
+  * @brief Disables access to the backup domain (RTC registers, RTC 
+  *         backup data registers and backup SRAM).
+  * @note If the HSE divided by 2, 3, ..31 is used as the RTC clock, the 
+  *         Backup Domain Access should be kept enabled.
+  * @note The following sequence is required to bypass the delay between
+  *         DBP bit programming and the effective disabling  of the backup domain.
+  *         Please check the Errata Sheet for more details under "Possible delay
+  *         in backup domain protection disabling/enabling after programming the
+  *         DBP bit" section.
+  * @retval None
+  */
+void HAL_PWR_DisableBkUpAccess(void)
+{
+  __IO uint32_t dummyread;
+  *(__IO uint32_t *) CR_DBP_BB = (uint32_t)DISABLE;
+  dummyread = PWR->CR;
+  UNUSED(dummyread);
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup PWR_Exported_Functions_Group2 Peripheral Control functions 
+  *  @brief Low Power modes configuration functions 
+  *
+@verbatim
+
+ ===============================================================================
+                 ##### Peripheral Control functions #####
+ ===============================================================================
+     
+    *** PVD configuration ***
+    =========================
+    [..]
+      (+) The PVD is used to monitor the VDD power supply by comparing it to a 
+          threshold selected by the PVD Level (PLS[2:0] bits in the PWR_CR).
+      (+) A PVDO flag is available to indicate if VDD/VDDA is higher or lower 
+          than the PVD threshold. This event is internally connected to the EXTI 
+          line16 and can generate an interrupt if enabled. This is done through
+          __HAL_PWR_PVD_EXTI_ENABLE_IT() macro.
+      (+) The PVD is stopped in Standby mode.
+
+    *** Wake-up pin configuration ***
+    ================================
+    [..]
+      (+) Wake-up pin is used to wake up the system from Standby mode. This pin is 
+          forced in input pull-down configuration and is active on rising edges.
+      (+) There is one Wake-up pin: Wake-up Pin 1 on PA.00.
+	   (++) For STM32F446xx there are two Wake-Up pins: Pin1 on PA.00 and Pin2 on PC.13
+           (++) For STM32F410xx/STM32F412xx/STM32F413xx/STM32F423xx  there are three Wake-Up pins: Pin1 on PA.00, Pin2 on PC.00 and Pin3 on PC.01 
+
+    *** Low Power modes configuration ***
+    =====================================
+    [..]
+      The devices feature 3 low-power modes:
+      (+) Sleep mode: Cortex-M4 core stopped, peripherals kept running.
+      (+) Stop mode: all clocks are stopped, regulator running, regulator 
+          in low power mode
+      (+) Standby mode: 1.2V domain powered off.
+   
+   *** Sleep mode ***
+   ==================
+    [..]
+      (+) Entry:
+        The Sleep mode is entered by using the HAL_PWR_EnterSLEEPMode(PWR_MAINREGULATOR_ON, PWR_SLEEPENTRY_WFI)
+              functions with
+          (++) PWR_SLEEPENTRY_WFI: enter SLEEP mode with WFI instruction
+          (++) PWR_SLEEPENTRY_WFE: enter SLEEP mode with WFE instruction
+      
+      -@@- The Regulator parameter is not used for the STM32F4 family 
+              and is kept as parameter just to maintain compatibility with the 
+              lower power families (STM32L).
+      (+) Exit:
+        Any peripheral interrupt acknowledged by the nested vectored interrupt 
+              controller (NVIC) can wake up the device from Sleep mode.
+
+   *** Stop mode ***
+   =================
+    [..]
+      In Stop mode, all clocks in the 1.2V domain are stopped, the PLL, the HSI,
+      and the HSE RC oscillators are disabled. Internal SRAM and register contents 
+      are preserved.
+      The voltage regulator can be configured either in normal or low-power mode.
+      To minimize the consumption In Stop mode, FLASH can be powered off before 
+      entering the Stop mode using the HAL_PWREx_EnableFlashPowerDown() function.
+      It can be switched on again by software after exiting the Stop mode using
+      the HAL_PWREx_DisableFlashPowerDown() function. 
+
+      (+) Entry:
+         The Stop mode is entered using the HAL_PWR_EnterSTOPMode(PWR_MAINREGULATOR_ON) 
+             function with:
+          (++) Main regulator ON.
+          (++) Low Power regulator ON.
+      (+) Exit:
+        Any EXTI Line (Internal or External) configured in Interrupt/Event mode.
+
+   *** Standby mode ***
+   ====================
+    [..]
+    (+)
+      The Standby mode allows to achieve the lowest power consumption. It is based 
+      on the Cortex-M4 deep sleep mode, with the voltage regulator disabled. 
+      The 1.2V domain is consequently powered off. The PLL, the HSI oscillator and 
+      the HSE oscillator are also switched off. SRAM and register contents are lost 
+      except for the RTC registers, RTC backup registers, backup SRAM and Standby 
+      circuitry.
+   
+      The voltage regulator is OFF.
+      
+      (++) Entry:
+        (+++) The Standby mode is entered using the HAL_PWR_EnterSTANDBYMode() function.
+      (++) Exit:
+        (+++) WKUP pin rising edge, RTC alarm (Alarm A and Alarm B), RTC wake-up,
+             tamper event, time-stamp event, external reset in NRST pin, IWDG reset.
+
+   *** Auto-wake-up (AWU) from low-power mode ***
+   =============================================
+    [..]
+    
+     (+) The MCU can be woken up from low-power mode by an RTC Alarm event, an RTC 
+      Wake-up event, a tamper event or a time-stamp event, without depending on 
+      an external interrupt (Auto-wake-up mode).
+
+      (+) RTC auto-wake-up (AWU) from the Stop and Standby modes
+       
+        (++) To wake up from the Stop mode with an RTC alarm event, it is necessary to 
+              configure the RTC to generate the RTC alarm using the HAL_RTC_SetAlarm_IT() function.
+
+        (++) To wake up from the Stop mode with an RTC Tamper or time stamp event, it 
+             is necessary to configure the RTC to detect the tamper or time stamp event using the
+                HAL_RTCEx_SetTimeStamp_IT() or HAL_RTCEx_SetTamper_IT() functions.
+                  
+        (++) To wake up from the Stop mode with an RTC Wake-up event, it is necessary to
+              configure the RTC to generate the RTC Wake-up event using the HAL_RTCEx_SetWakeUpTimer_IT() function.
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief Configures the voltage threshold detected by the Power Voltage Detector(PVD).
+  * @param sConfigPVD pointer to an PWR_PVDTypeDef structure that contains the configuration
+  *        information for the PVD.
+  * @note Refer to the electrical characteristics of your device datasheet for
+  *         more details about the voltage threshold corresponding to each 
+  *         detection level.
+  * @retval None
+  */
+void HAL_PWR_ConfigPVD(PWR_PVDTypeDef *sConfigPVD)
+{
+  /* Check the parameters */
+  assert_param(IS_PWR_PVD_LEVEL(sConfigPVD->PVDLevel));
+  assert_param(IS_PWR_PVD_MODE(sConfigPVD->Mode));
+  
+  /* Set PLS[7:5] bits according to PVDLevel value */
+  MODIFY_REG(PWR->CR, PWR_CR_PLS, sConfigPVD->PVDLevel);
+  
+  /* Clear any previous config. Keep it clear if no event or IT mode is selected */
+  __HAL_PWR_PVD_EXTI_DISABLE_EVENT();
+  __HAL_PWR_PVD_EXTI_DISABLE_IT();
+  __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE();
+  __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE(); 
+
+  /* Configure interrupt mode */
+  if((sConfigPVD->Mode & PVD_MODE_IT) == PVD_MODE_IT)
+  {
+    __HAL_PWR_PVD_EXTI_ENABLE_IT();
+  }
+  
+  /* Configure event mode */
+  if((sConfigPVD->Mode & PVD_MODE_EVT) == PVD_MODE_EVT)
+  {
+    __HAL_PWR_PVD_EXTI_ENABLE_EVENT();
+  }
+  
+  /* Configure the edge */
+  if((sConfigPVD->Mode & PVD_RISING_EDGE) == PVD_RISING_EDGE)
+  {
+    __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE();
+  }
+  
+  if((sConfigPVD->Mode & PVD_FALLING_EDGE) == PVD_FALLING_EDGE)
+  {
+    __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE();
+  }
+}
+
+/**
+  * @brief Enables the Power Voltage Detector(PVD).
+  * @retval None
+  */
+void HAL_PWR_EnablePVD(void)
+{
+  *(__IO uint32_t *) CR_PVDE_BB = (uint32_t)ENABLE;
+}
+
+/**
+  * @brief Disables the Power Voltage Detector(PVD).
+  * @retval None
+  */
+void HAL_PWR_DisablePVD(void)
+{
+  *(__IO uint32_t *) CR_PVDE_BB = (uint32_t)DISABLE;
+}
+
+/**
+  * @brief Enables the Wake-up PINx functionality.
+  * @param WakeUpPinx Specifies the Power Wake-Up pin to enable.
+  *         This parameter can be one of the following values:
+  *           @arg PWR_WAKEUP_PIN1
+  *           @arg PWR_WAKEUP_PIN2 available only on STM32F410xx/STM32F446xx/STM32F412xx/STM32F413xx/STM32F423xx devices
+  *           @arg PWR_WAKEUP_PIN3 available only on STM32F410xx/STM32F412xx/STM32F413xx/STM32F423xx devices
+  * @retval None
+  */
+void HAL_PWR_EnableWakeUpPin(uint32_t WakeUpPinx)
+{
+  /* Check the parameter */
+  assert_param(IS_PWR_WAKEUP_PIN(WakeUpPinx));
+
+  /* Enable the wake up pin */
+  SET_BIT(PWR->CSR, WakeUpPinx);
+}
+
+/**
+  * @brief Disables the Wake-up PINx functionality.
+  * @param WakeUpPinx Specifies the Power Wake-Up pin to disable.
+  *         This parameter can be one of the following values:
+  *           @arg PWR_WAKEUP_PIN1
+  *           @arg PWR_WAKEUP_PIN2 available only on STM32F410xx/STM32F446xx/STM32F412xx/STM32F413xx/STM32F423xx devices
+  *           @arg PWR_WAKEUP_PIN3 available only on STM32F410xx/STM32F412xx/STM32F413xx/STM32F423xx devices
+  * @retval None
+  */
+void HAL_PWR_DisableWakeUpPin(uint32_t WakeUpPinx)
+{
+  /* Check the parameter */
+  assert_param(IS_PWR_WAKEUP_PIN(WakeUpPinx));  
+
+  /* Disable the wake up pin */
+  CLEAR_BIT(PWR->CSR, WakeUpPinx);
+}
+  
+/**
+  * @brief Enters Sleep mode.
+  *   
+  * @note In Sleep mode, all I/O pins keep the same state as in Run mode.
+  * 
+  * @note In Sleep mode, the systick is stopped to avoid exit from this mode with
+  *       systick interrupt when used as time base for Timeout 
+  *                
+  * @param Regulator Specifies the regulator state in SLEEP mode.
+  *            This parameter can be one of the following values:
+  *            @arg PWR_MAINREGULATOR_ON: SLEEP mode with regulator ON
+  *            @arg PWR_LOWPOWERREGULATOR_ON: SLEEP mode with low power regulator ON
+  * @note This parameter is not used for the STM32F4 family and is kept as parameter
+  *       just to maintain compatibility with the lower power families.
+  * @param SLEEPEntry Specifies if SLEEP mode in entered with WFI or WFE instruction.
+  *          This parameter can be one of the following values:
+  *            @arg PWR_SLEEPENTRY_WFI: enter SLEEP mode with WFI instruction
+  *            @arg PWR_SLEEPENTRY_WFE: enter SLEEP mode with WFE instruction
+  * @retval None
+  */
+void HAL_PWR_EnterSLEEPMode(uint32_t Regulator, uint8_t SLEEPEntry)
+{
+  /* Check the parameters */
+  assert_param(IS_PWR_REGULATOR(Regulator));
+  assert_param(IS_PWR_SLEEP_ENTRY(SLEEPEntry));
+
+  /* Clear SLEEPDEEP bit of Cortex System Control Register */
+  CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk));
+
+  /* Select SLEEP mode entry -------------------------------------------------*/
+  if(SLEEPEntry == PWR_SLEEPENTRY_WFI)
+  {   
+    /* Request Wait For Interrupt */
+    __WFI();
+  }
+  else
+  {
+    /* Request Wait For Event */
+    __SEV();
+    __WFE();
+    __WFE();
+  }
+}
+
+/**
+  * @brief Enters Stop mode. 
+  * @note In Stop mode, all I/O pins keep the same state as in Run mode.
+  * @note When exiting Stop mode by issuing an interrupt or a wake-up event, 
+  *         the HSI RC oscillator is selected as system clock.
+  * @note When the voltage regulator operates in low power mode, an additional 
+  *         startup delay is incurred when waking up from Stop mode. 
+  *         By keeping the internal regulator ON during Stop mode, the consumption 
+  *         is higher although the startup time is reduced.    
+  * @param Regulator Specifies the regulator state in Stop mode.
+  *          This parameter can be one of the following values:
+  *            @arg PWR_MAINREGULATOR_ON: Stop mode with regulator ON
+  *            @arg PWR_LOWPOWERREGULATOR_ON: Stop mode with low power regulator ON
+  * @param STOPEntry Specifies if Stop mode in entered with WFI or WFE instruction.
+  *          This parameter can be one of the following values:
+  *            @arg PWR_STOPENTRY_WFI: Enter Stop mode with WFI instruction
+  *            @arg PWR_STOPENTRY_WFE: Enter Stop mode with WFE instruction
+  * @retval None
+  */
+void HAL_PWR_EnterSTOPMode(uint32_t Regulator, uint8_t STOPEntry)
+{
+  /* Check the parameters */
+  assert_param(IS_PWR_REGULATOR(Regulator));
+  assert_param(IS_PWR_STOP_ENTRY(STOPEntry));
+  
+  /* Select the regulator state in Stop mode: Set PDDS and LPDS bits according to PWR_Regulator value */
+  MODIFY_REG(PWR->CR, (PWR_CR_PDDS | PWR_CR_LPDS), Regulator);
+  
+  /* Set SLEEPDEEP bit of Cortex System Control Register */
+  SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk));
+  
+  /* Select Stop mode entry --------------------------------------------------*/
+  if(STOPEntry == PWR_STOPENTRY_WFI)
+  {   
+    /* Request Wait For Interrupt */
+    __WFI();
+  }
+  else
+  {
+    /* Request Wait For Event */
+    __SEV();
+    __WFE();
+    __WFE();
+  }
+  /* Reset SLEEPDEEP bit of Cortex System Control Register */
+  CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk));  
+}
+
+/**
+  * @brief Enters Standby mode.
+  * @note In Standby mode, all I/O pins are high impedance except for:
+  *          - Reset pad (still available) 
+  *          - RTC_AF1 pin (PC13) if configured for tamper, time-stamp, RTC 
+  *            Alarm out, or RTC clock calibration out.
+  *          - RTC_AF2 pin (PI8) if configured for tamper or time-stamp.  
+  *          - WKUP pin 1 (PA0) if enabled.       
+  * @retval None
+  */
+void HAL_PWR_EnterSTANDBYMode(void)
+{
+  /* Select Standby mode */
+  SET_BIT(PWR->CR, PWR_CR_PDDS);
+
+  /* Set SLEEPDEEP bit of Cortex System Control Register */
+  SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk));
+  
+  /* This option is used to ensure that store operations are completed */
+#if defined ( __CC_ARM)
+  __force_stores();
+#endif
+  /* Request Wait For Interrupt */
+  __WFI();
+}
+
+/**
+  * @brief This function handles the PWR PVD interrupt request.
+  * @note This API should be called under the PVD_IRQHandler().
+  * @retval None
+  */
+void HAL_PWR_PVD_IRQHandler(void)
+{
+  /* Check PWR Exti flag */
+  if(__HAL_PWR_PVD_EXTI_GET_FLAG() != RESET)
+  {
+    /* PWR PVD interrupt user callback */
+    HAL_PWR_PVDCallback();
+    
+    /* Clear PWR Exti pending bit */
+    __HAL_PWR_PVD_EXTI_CLEAR_FLAG();
+  }
+}
+
+/**
+  * @brief  PWR PVD interrupt callback
+  * @retval None
+  */
+__weak void HAL_PWR_PVDCallback(void)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_PWR_PVDCallback could be implemented in the user file
+   */ 
+}
+
+/**
+  * @brief Indicates Sleep-On-Exit when returning from Handler mode to Thread mode. 
+  * @note Set SLEEPONEXIT bit of SCR register. When this bit is set, the processor 
+  *       re-enters SLEEP mode when an interruption handling is over.
+  *       Setting this bit is useful when the processor is expected to run only on
+  *       interruptions handling.         
+  * @retval None
+  */
+void HAL_PWR_EnableSleepOnExit(void)
+{
+  /* Set SLEEPONEXIT bit of Cortex System Control Register */
+  SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk));
+}
+
+/**
+  * @brief Disables Sleep-On-Exit feature when returning from Handler mode to Thread mode. 
+  * @note Clears SLEEPONEXIT bit of SCR register. When this bit is set, the processor 
+  *       re-enters SLEEP mode when an interruption handling is over.          
+  * @retval None
+  */
+void HAL_PWR_DisableSleepOnExit(void)
+{
+  /* Clear SLEEPONEXIT bit of Cortex System Control Register */
+  CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk));
+}
+
+/**
+  * @brief Enables CORTEX M4 SEVONPEND bit. 
+  * @note Sets SEVONPEND bit of SCR register. When this bit is set, this causes 
+  *       WFE to wake up when an interrupt moves from inactive to pended.
+  * @retval None
+  */
+void HAL_PWR_EnableSEVOnPend(void)
+{
+  /* Set SEVONPEND bit of Cortex System Control Register */
+  SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk));
+}
+
+/**
+  * @brief Disables CORTEX M4 SEVONPEND bit. 
+  * @note Clears SEVONPEND bit of SCR register. When this bit is set, this causes 
+  *       WFE to wake up when an interrupt moves from inactive to pended.         
+  * @retval None
+  */
+void HAL_PWR_DisableSEVOnPend(void)
+{
+  /* Clear SEVONPEND bit of Cortex System Control Register */
+  CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk));
+}
+
+/**
+  * @}
+  */
+  
+/**
+  * @}
+  */
+
+#endif /* HAL_PWR_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

libs/STM32_HAL/src/stm32f4xx/stm32f4xx_hal_pwr_ex.c

@@ -0,0 +1,604 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_pwr_ex.c
+  * @author  MCD Application Team
+  * @brief   Extended PWR HAL module driver.
+  *          This file provides firmware functions to manage the following 
+  *          functionalities of PWR extension peripheral:           
+  *           + Peripheral Extended features functions
+  *         
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */ 
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup PWREx PWREx
+  * @brief PWR HAL module driver
+  * @{
+  */
+
+#ifdef HAL_PWR_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @addtogroup PWREx_Private_Constants
+  * @{
+  */    
+#define PWR_OVERDRIVE_TIMEOUT_VALUE  1000U
+#define PWR_UDERDRIVE_TIMEOUT_VALUE  1000U
+#define PWR_BKPREG_TIMEOUT_VALUE     1000U
+#define PWR_VOSRDY_TIMEOUT_VALUE     1000U
+/**
+  * @}
+  */
+
+   
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup PWREx_Exported_Functions PWREx Exported Functions
+  *  @{
+  */
+
+/** @defgroup PWREx_Exported_Functions_Group1 Peripheral Extended features functions 
+  *  @brief Peripheral Extended features functions 
+  *
+@verbatim   
+
+ ===============================================================================
+                 ##### Peripheral extended features functions #####
+ ===============================================================================
+
+    *** Main and Backup Regulators configuration ***
+    ================================================
+    [..] 
+      (+) The backup domain includes 4 Kbytes of backup SRAM accessible only from 
+          the CPU, and address in 32-bit, 16-bit or 8-bit mode. Its content is 
+          retained even in Standby or VBAT mode when the low power backup regulator
+          is enabled. It can be considered as an internal EEPROM when VBAT is 
+          always present. You can use the HAL_PWREx_EnableBkUpReg() function to 
+          enable the low power backup regulator. 
+
+      (+) When the backup domain is supplied by VDD (analog switch connected to VDD) 
+          the backup SRAM is powered from VDD which replaces the VBAT power supply to 
+          save battery life.
+
+      (+) The backup SRAM is not mass erased by a tamper event. It is read 
+          protected to prevent confidential data, such as cryptographic private 
+          key, from being accessed. The backup SRAM can be erased only through 
+          the Flash interface when a protection level change from level 1 to 
+          level 0 is requested. 
+      -@- Refer to the description of Read protection (RDP) in the Flash 
+          programming manual.
+
+      (+) The main internal regulator can be configured to have a tradeoff between 
+          performance and power consumption when the device does not operate at 
+          the maximum frequency. This is done through __HAL_PWR_MAINREGULATORMODE_CONFIG() 
+          macro which configure VOS bit in PWR_CR register
+          
+        Refer to the product datasheets for more details.
+
+    *** FLASH Power Down configuration ****
+    =======================================
+    [..] 
+      (+) By setting the FPDS bit in the PWR_CR register by using the 
+          HAL_PWREx_EnableFlashPowerDown() function, the Flash memory also enters power 
+          down mode when the device enters Stop mode. When the Flash memory 
+          is in power down mode, an additional startup delay is incurred when 
+          waking up from Stop mode.
+          
+           (+) For STM32F42xxx/43xxx/446xx/469xx/479xx Devices, the scale can be modified only when the PLL 
+           is OFF and the HSI or HSE clock source is selected as system clock. 
+           The new value programmed is active only when the PLL is ON.
+           When the PLL is OFF, the voltage scale 3 is automatically selected. 
+        Refer to the datasheets for more details.
+
+    *** Over-Drive and Under-Drive configuration ****
+    =================================================
+    [..]         
+       (+) For STM32F42xxx/43xxx/446xx/469xx/479xx Devices, in Run mode: the main regulator has
+           2 operating modes available:
+        (++) Normal mode: The CPU and core logic operate at maximum frequency at a given 
+             voltage scaling (scale 1, scale 2 or scale 3)
+        (++) Over-drive mode: This mode allows the CPU and the core logic to operate at a 
+            higher frequency than the normal mode for a given voltage scaling (scale 1,  
+            scale 2 or scale 3). This mode is enabled through HAL_PWREx_EnableOverDrive() function and
+            disabled by HAL_PWREx_DisableOverDrive() function, to enter or exit from Over-drive mode please follow 
+            the sequence described in Reference manual.
+             
+       (+) For STM32F42xxx/43xxx/446xx/469xx/479xx Devices, in Stop mode: the main regulator or low power regulator 
+           supplies a low power voltage to the 1.2V domain, thus preserving the content of registers 
+           and internal SRAM. 2 operating modes are available:
+         (++) Normal mode: the 1.2V domain is preserved in nominal leakage mode. This mode is only 
+              available when the main regulator or the low power regulator is used in Scale 3 or 
+              low voltage mode.
+         (++) Under-drive mode: the 1.2V domain is preserved in reduced leakage mode. This mode is only
+              available when the main regulator or the low power regulator is in low voltage mode.
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief Enables the Backup Regulator.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_PWREx_EnableBkUpReg(void)
+{
+  uint32_t tickstart = 0U;
+
+  *(__IO uint32_t *) CSR_BRE_BB = (uint32_t)ENABLE;
+
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+  /* Wait till Backup regulator ready flag is set */  
+  while(__HAL_PWR_GET_FLAG(PWR_FLAG_BRR) == RESET)
+  {
+    if((HAL_GetTick() - tickstart ) > PWR_BKPREG_TIMEOUT_VALUE)
+    {
+      return HAL_TIMEOUT;
+    } 
+  }
+  return HAL_OK;
+}
+
+/**
+  * @brief Disables the Backup Regulator.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_PWREx_DisableBkUpReg(void)
+{
+  uint32_t tickstart = 0U;
+
+  *(__IO uint32_t *) CSR_BRE_BB = (uint32_t)DISABLE;
+
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+  /* Wait till Backup regulator ready flag is set */  
+  while(__HAL_PWR_GET_FLAG(PWR_FLAG_BRR) != RESET)
+  {
+    if((HAL_GetTick() - tickstart ) > PWR_BKPREG_TIMEOUT_VALUE)
+    {
+      return HAL_TIMEOUT;
+    } 
+  }
+  return HAL_OK;
+}
+
+/**
+  * @brief Enables the Flash Power Down in Stop mode.
+  * @retval None
+  */
+void HAL_PWREx_EnableFlashPowerDown(void)
+{
+  *(__IO uint32_t *) CR_FPDS_BB = (uint32_t)ENABLE;
+}
+
+/**
+  * @brief Disables the Flash Power Down in Stop mode.
+  * @retval None
+  */
+void HAL_PWREx_DisableFlashPowerDown(void)
+{
+  *(__IO uint32_t *) CR_FPDS_BB = (uint32_t)DISABLE;
+}
+
+/**
+  * @brief Return Voltage Scaling Range.
+  * @retval The configured scale for the regulator voltage(VOS bit field).
+  *         The returned value can be one of the following:
+  *            - @arg PWR_REGULATOR_VOLTAGE_SCALE1: Regulator voltage output Scale 1 mode
+  *            - @arg PWR_REGULATOR_VOLTAGE_SCALE2: Regulator voltage output Scale 2 mode
+  *            - @arg PWR_REGULATOR_VOLTAGE_SCALE3: Regulator voltage output Scale 3 mode
+  */  
+uint32_t HAL_PWREx_GetVoltageRange(void)
+{
+  return (PWR->CR & PWR_CR_VOS);
+}
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx)
+/**
+  * @brief Configures the main internal regulator output voltage.
+  * @param  VoltageScaling specifies the regulator output voltage to achieve
+  *         a tradeoff between performance and power consumption.
+  *          This parameter can be one of the following values:
+  *            @arg PWR_REGULATOR_VOLTAGE_SCALE1: Regulator voltage output range 1 mode,
+  *                                               the maximum value of fHCLK = 168 MHz.
+  *            @arg PWR_REGULATOR_VOLTAGE_SCALE2: Regulator voltage output range 2 mode,
+  *                                               the maximum value of fHCLK = 144 MHz.
+  * @note  When moving from Range 1 to Range 2, the system frequency must be decreased to
+  *        a value below 144 MHz before calling HAL_PWREx_ConfigVoltageScaling() API.
+  *        When moving from Range 2 to Range 1, the system frequency can be increased to
+  *        a value up to 168 MHz after calling HAL_PWREx_ConfigVoltageScaling() API.
+  * @retval HAL Status
+  */
+HAL_StatusTypeDef HAL_PWREx_ControlVoltageScaling(uint32_t VoltageScaling)
+{
+  uint32_t tickstart = 0U;
+  
+  assert_param(IS_PWR_VOLTAGE_SCALING_RANGE(VoltageScaling));
+  
+  /* Enable PWR RCC Clock Peripheral */
+  __HAL_RCC_PWR_CLK_ENABLE();
+  
+  /* Set Range */
+  __HAL_PWR_VOLTAGESCALING_CONFIG(VoltageScaling);
+  
+  /* Get Start Tick*/
+  tickstart = HAL_GetTick();
+  while((__HAL_PWR_GET_FLAG(PWR_FLAG_VOSRDY) == RESET))
+  {
+    if((HAL_GetTick() - tickstart ) > PWR_VOSRDY_TIMEOUT_VALUE)
+    {
+      return HAL_TIMEOUT;
+    } 
+  }
+
+  return HAL_OK;
+}
+
+#elif defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \
+      defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) || \
+      defined(STM32F410Rx) || defined(STM32F411xE) || defined(STM32F446xx) || defined(STM32F469xx) || \
+      defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || \
+      defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx)
+/**
+  * @brief Configures the main internal regulator output voltage.
+  * @param  VoltageScaling specifies the regulator output voltage to achieve
+  *         a tradeoff between performance and power consumption.
+  *          This parameter can be one of the following values:
+  *            @arg PWR_REGULATOR_VOLTAGE_SCALE1: Regulator voltage output range 1 mode,
+  *                                               the maximum value of fHCLK is 168 MHz. It can be extended to
+  *                                               180 MHz by activating the over-drive mode.
+  *            @arg PWR_REGULATOR_VOLTAGE_SCALE2: Regulator voltage output range 2 mode,
+  *                                               the maximum value of fHCLK is 144 MHz. It can be extended to,                
+  *                                               168 MHz by activating the over-drive mode.
+  *            @arg PWR_REGULATOR_VOLTAGE_SCALE3: Regulator voltage output range 3 mode,
+  *                                               the maximum value of fHCLK is 120 MHz.
+  * @note To update the system clock frequency(SYSCLK):
+  *        - Set the HSI or HSE as system clock frequency using the HAL_RCC_ClockConfig().
+  *        - Call the HAL_RCC_OscConfig() to configure the PLL.
+  *        - Call HAL_PWREx_ConfigVoltageScaling() API to adjust the voltage scale.
+  *        - Set the new system clock frequency using the HAL_RCC_ClockConfig().
+  * @note The scale can be modified only when the HSI or HSE clock source is selected 
+  *        as system clock source, otherwise the API returns HAL_ERROR.  
+  * @note When the PLL is OFF, the voltage scale 3 is automatically selected and the VOS bits
+  *       value in the PWR_CR1 register are not taken in account.
+  * @note This API forces the PLL state ON to allow the possibility to configure the voltage scale 1 or 2.
+  * @note The new voltage scale is active only when the PLL is ON.  
+  * @retval HAL Status
+  */
+HAL_StatusTypeDef HAL_PWREx_ControlVoltageScaling(uint32_t VoltageScaling)
+{
+  uint32_t tickstart = 0U;
+  
+  assert_param(IS_PWR_VOLTAGE_SCALING_RANGE(VoltageScaling));
+  
+  /* Enable PWR RCC Clock Peripheral */
+  __HAL_RCC_PWR_CLK_ENABLE();
+  
+  /* Check if the PLL is used as system clock or not */
+  if(__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_CFGR_SWS_PLL)
+  {
+    /* Disable the main PLL */
+    __HAL_RCC_PLL_DISABLE();
+    
+    /* Get Start Tick */
+    tickstart = HAL_GetTick();    
+    /* Wait till PLL is disabled */  
+    while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) != RESET)
+    {
+      if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE)
+      {
+        return HAL_TIMEOUT;
+      }
+    }
+    
+    /* Set Range */
+    __HAL_PWR_VOLTAGESCALING_CONFIG(VoltageScaling);
+    
+    /* Enable the main PLL */
+    __HAL_RCC_PLL_ENABLE();
+    
+    /* Get Start Tick */
+    tickstart = HAL_GetTick();
+    /* Wait till PLL is ready */  
+    while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) == RESET)
+    {
+      if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE)
+      {
+        return HAL_TIMEOUT;
+      } 
+    }
+    
+    /* Get Start Tick */
+    tickstart = HAL_GetTick();
+    while((__HAL_PWR_GET_FLAG(PWR_FLAG_VOSRDY) == RESET))
+    {
+      if((HAL_GetTick() - tickstart ) > PWR_VOSRDY_TIMEOUT_VALUE)
+      {
+        return HAL_TIMEOUT;
+      } 
+    }
+  }
+  else
+  {
+    return HAL_ERROR;
+  }
+
+  return HAL_OK;
+}
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */
+
+#if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) ||\
+    defined(STM32F411xE) || defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) ||\
+    defined(STM32F413xx) || defined(STM32F423xx)
+/**
+  * @brief Enables Main Regulator low voltage mode.
+  * @note  This mode is only available for STM32F401xx/STM32F410xx/STM32F411xx/STM32F412Zx/STM32F412Rx/STM32F412Vx/STM32F412Cx/
+  *        STM32F413xx/STM32F423xx devices.   
+  * @retval None
+  */
+void HAL_PWREx_EnableMainRegulatorLowVoltage(void)
+{
+  *(__IO uint32_t *) CR_MRLVDS_BB = (uint32_t)ENABLE;
+}
+
+/**
+  * @brief Disables Main Regulator low voltage mode.
+  * @note  This mode is only available for STM32F401xx/STM32F410xx/STM32F411xx/STM32F412Zx/STM32F412Rx/STM32F412Vx/STM32F412Cx/
+  *        STM32F413xx/STM32F423xxdevices. 
+  * @retval None
+  */
+void HAL_PWREx_DisableMainRegulatorLowVoltage(void)
+{
+  *(__IO uint32_t *) CR_MRLVDS_BB = (uint32_t)DISABLE;
+}
+
+/**
+  * @brief Enables Low Power Regulator low voltage mode.
+  * @note  This mode is only available for STM32F401xx/STM32F410xx/STM32F411xx/STM32F412Zx/STM32F412Rx/STM32F412Vx/STM32F412Cx/
+  *        STM32F413xx/STM32F423xx devices.   
+  * @retval None
+  */
+void HAL_PWREx_EnableLowRegulatorLowVoltage(void)
+{
+  *(__IO uint32_t *) CR_LPLVDS_BB = (uint32_t)ENABLE;
+}
+
+/**
+  * @brief Disables Low Power Regulator low voltage mode.
+  * @note  This mode is only available for STM32F401xx/STM32F410xx/STM32F411xx/STM32F412Zx/STM32F412Rx/STM32F412Vx/STM32F412Cx/
+  *        STM32F413xx/STM32F423xx  devices.   
+  * @retval None
+  */
+void HAL_PWREx_DisableLowRegulatorLowVoltage(void)
+{
+  *(__IO uint32_t *) CR_LPLVDS_BB = (uint32_t)DISABLE;
+}
+
+#endif /* STM32F401xC || STM32F401xE || STM32F410xx || STM32F411xE || STM32F412Zx || STM32F412Rx || STM32F412Vx || STM32F412Cx ||
+          STM32F413xx || STM32F423xx */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+    defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
+/**
+  * @brief  Activates the Over-Drive mode.
+  * @note   This function can be used only for STM32F42xx/STM32F43xx/STM32F446xx/STM32F469xx/STM32F479xx devices.
+  *         This mode allows the CPU and the core logic to operate at a higher frequency
+  *         than the normal mode for a given voltage scaling (scale 1, scale 2 or scale 3).   
+  * @note   It is recommended to enter or exit Over-drive mode when the application is not running 
+  *         critical tasks and when the system clock source is either HSI or HSE. 
+  *         During the Over-drive switch activation, no peripheral clocks should be enabled.   
+  *         The peripheral clocks must be enabled once the Over-drive mode is activated.   
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_PWREx_EnableOverDrive(void)
+{
+  uint32_t tickstart = 0U;
+
+  __HAL_RCC_PWR_CLK_ENABLE();
+  
+  /* Enable the Over-drive to extend the clock frequency to 180 Mhz */
+  __HAL_PWR_OVERDRIVE_ENABLE();
+
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+  while(!__HAL_PWR_GET_FLAG(PWR_FLAG_ODRDY))
+  {
+    if((HAL_GetTick() - tickstart) > PWR_OVERDRIVE_TIMEOUT_VALUE)
+    {
+      return HAL_TIMEOUT;
+    }
+  }
+  
+  /* Enable the Over-drive switch */
+  __HAL_PWR_OVERDRIVESWITCHING_ENABLE();
+
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+  while(!__HAL_PWR_GET_FLAG(PWR_FLAG_ODSWRDY))
+  {
+    if((HAL_GetTick() - tickstart ) > PWR_OVERDRIVE_TIMEOUT_VALUE)
+    {
+      return HAL_TIMEOUT;
+    }
+  } 
+  return HAL_OK;
+}
+
+/**
+  * @brief  Deactivates the Over-Drive mode.
+  * @note   This function can be used only for STM32F42xx/STM32F43xx/STM32F446xx/STM32F469xx/STM32F479xx devices.
+  *         This mode allows the CPU and the core logic to operate at a higher frequency
+  *         than the normal mode for a given voltage scaling (scale 1, scale 2 or scale 3).    
+  * @note   It is recommended to enter or exit Over-drive mode when the application is not running 
+  *         critical tasks and when the system clock source is either HSI or HSE. 
+  *         During the Over-drive switch activation, no peripheral clocks should be enabled.   
+  *         The peripheral clocks must be enabled once the Over-drive mode is activated.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_PWREx_DisableOverDrive(void)
+{
+  uint32_t tickstart = 0U;
+  
+  __HAL_RCC_PWR_CLK_ENABLE();
+    
+  /* Disable the Over-drive switch */
+  __HAL_PWR_OVERDRIVESWITCHING_DISABLE();
+  
+  /* Get tick */
+  tickstart = HAL_GetTick();
+ 
+  while(__HAL_PWR_GET_FLAG(PWR_FLAG_ODSWRDY))
+  {
+    if((HAL_GetTick() - tickstart) > PWR_OVERDRIVE_TIMEOUT_VALUE)
+    {
+      return HAL_TIMEOUT;
+    }
+  } 
+  
+  /* Disable the Over-drive */
+  __HAL_PWR_OVERDRIVE_DISABLE();
+
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+  while(__HAL_PWR_GET_FLAG(PWR_FLAG_ODRDY))
+  {
+    if((HAL_GetTick() - tickstart) > PWR_OVERDRIVE_TIMEOUT_VALUE)
+    {
+      return HAL_TIMEOUT;
+    }
+  }
+  
+  return HAL_OK;
+}
+
+/**
+  * @brief  Enters in Under-Drive STOP mode.
+  *  
+  * @note   This mode is only available for STM32F42xxx/STM32F43xxx/STM32F446xx/STM32F469xx/STM32F479xx devices.
+  * 
+  * @note    This mode can be selected only when the Under-Drive is already active 
+  *   
+  * @note    This mode is enabled only with STOP low power mode.
+  *          In this mode, the 1.2V domain is preserved in reduced leakage mode. This 
+  *          mode is only available when the main regulator or the low power regulator 
+  *          is in low voltage mode
+  *        
+  * @note   If the Under-drive mode was enabled, it is automatically disabled after 
+  *         exiting Stop mode. 
+  *         When the voltage regulator operates in Under-drive mode, an additional  
+  *         startup delay is induced when waking up from Stop mode.
+  *                    
+  * @note   In Stop mode, all I/O pins keep the same state as in Run mode.
+  *   
+  * @note   When exiting Stop mode by issuing an interrupt or a wake-up event, 
+  *         the HSI RC oscillator is selected as system clock.
+  *           
+  * @note   When the voltage regulator operates in low power mode, an additional 
+  *         startup delay is incurred when waking up from Stop mode. 
+  *         By keeping the internal regulator ON during Stop mode, the consumption 
+  *         is higher although the startup time is reduced.
+  *     
+  * @param  Regulator specifies the regulator state in STOP mode.
+  *          This parameter can be one of the following values:
+  *            @arg PWR_MAINREGULATOR_UNDERDRIVE_ON:  Main Regulator in under-drive mode 
+  *                 and Flash memory in power-down when the device is in Stop under-drive mode
+  *            @arg PWR_LOWPOWERREGULATOR_UNDERDRIVE_ON:  Low Power Regulator in under-drive mode 
+  *                and Flash memory in power-down when the device is in Stop under-drive mode
+  * @param  STOPEntry specifies if STOP mode in entered with WFI or WFE instruction.
+  *          This parameter can be one of the following values:
+  *            @arg PWR_SLEEPENTRY_WFI: enter STOP mode with WFI instruction
+  *            @arg PWR_SLEEPENTRY_WFE: enter STOP mode with WFE instruction
+  * @retval None
+  */
+HAL_StatusTypeDef HAL_PWREx_EnterUnderDriveSTOPMode(uint32_t Regulator, uint8_t STOPEntry)
+{
+  uint32_t tmpreg1 = 0U;
+
+  /* Check the parameters */
+  assert_param(IS_PWR_REGULATOR_UNDERDRIVE(Regulator));
+  assert_param(IS_PWR_STOP_ENTRY(STOPEntry));
+  
+  /* Enable Power ctrl clock */
+  __HAL_RCC_PWR_CLK_ENABLE();
+  /* Enable the Under-drive Mode ---------------------------------------------*/
+  /* Clear Under-drive flag */
+  __HAL_PWR_CLEAR_ODRUDR_FLAG();
+  
+  /* Enable the Under-drive */ 
+  __HAL_PWR_UNDERDRIVE_ENABLE();
+
+  /* Select the regulator state in STOP mode ---------------------------------*/
+  tmpreg1 = PWR->CR;
+  /* Clear PDDS, LPDS, MRLUDS and LPLUDS bits */
+  tmpreg1 &= (uint32_t)~(PWR_CR_PDDS | PWR_CR_LPDS | PWR_CR_LPUDS | PWR_CR_MRUDS);
+  
+  /* Set LPDS, MRLUDS and LPLUDS bits according to PWR_Regulator value */
+  tmpreg1 |= Regulator;
+  
+  /* Store the new value */
+  PWR->CR = tmpreg1;
+  
+  /* Set SLEEPDEEP bit of Cortex System Control Register */
+  SCB->SCR |= SCB_SCR_SLEEPDEEP_Msk;
+  
+  /* Select STOP mode entry --------------------------------------------------*/
+  if(STOPEntry == PWR_SLEEPENTRY_WFI)
+  {   
+    /* Request Wait For Interrupt */
+    __WFI();
+  }
+  else
+  {
+    /* Request Wait For Event */
+    __WFE();
+  }
+  /* Reset SLEEPDEEP bit of Cortex System Control Register */
+  SCB->SCR &= (uint32_t)~((uint32_t)SCB_SCR_SLEEPDEEP_Msk);
+
+  return HAL_OK;  
+}
+
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#endif /* HAL_PWR_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

libs/STM32_USB_Device_Library/CMakeLists.txt

@@ -6,7 +6,7 @@ set(SOURCES
     Core/Src/usbd_ctlreq.c
     Core/Inc/usbd_ioreq.h
     Core/Src/usbd_ioreq.c
-    Core/Inc/usbd_core.h        
+    Core/Inc/usbd_core.h
     Core/Src/usbd_core.c
 )
 
@@ -17,10 +17,15 @@ set(INCLUDE_DIRS
 
 add_library(STM32_USB_Device_Library_STM32F042x6 STATIC ${SOURCES})
     target_include_directories(STM32_USB_Device_Library_STM32F042x6 PUBLIC ${INCLUDE_DIRS})
-    target_compile_options(STM32_USB_Device_Library_STM32F042x6 PRIVATE -Wno-unused-parameter)
+    target_compile_options(STM32_USB_Device_Library_STM32F042x6 PRIVATE -mcpu=cortex-m0 -Wno-unused-parameter -DSTM32F0)
     target_link_libraries(STM32_USB_Device_Library_STM32F042x6 PRIVATE STM32_HAL_STM32F042x6)
-    
+
 add_library(STM32_USB_Device_Library_STM32F072xB STATIC ${SOURCES})
     target_include_directories(STM32_USB_Device_Library_STM32F072xB PUBLIC ${INCLUDE_DIRS})
-    target_compile_options(STM32_USB_Device_Library_STM32F072xB PRIVATE -Wno-unused-parameter)
+    target_compile_options(STM32_USB_Device_Library_STM32F072xB PRIVATE -mcpu=cortex-m0 -Wno-unused-parameter -DSTM32F0)
     target_link_libraries(STM32_USB_Device_Library_STM32F072xB PRIVATE STM32_HAL_STM32F072xB)
+
+add_library(STM32_USB_Device_Library_STM32F407xE STATIC ${SOURCES})
+    target_include_directories(STM32_USB_Device_Library_STM32F407xE PUBLIC ${INCLUDE_DIRS})
+    target_compile_options(STM32_USB_Device_Library_STM32F407xE PRIVATE -mcpu=cortex-m4 -Wno-unused-parameter -DSTM32F4)
+    target_link_libraries(STM32_USB_Device_Library_STM32F407xE PRIVATE STM32_HAL_STM32F407xE)

libs/STM32_USB_Device_Library/config/usbd_conf.h

@@ -26,13 +26,13 @@ THE SOFTWARE.
 
 #pragma once
 
-#include "stm32f0xx_hal.h"
+#include "hal_include.h"
 
-#define USBD_MAX_NUM_INTERFACES      1
-#define USBD_MAX_NUM_CONFIGURATION   1
-#define USBD_DESC_BUF_SIZE      192
+#define USBD_MAX_NUM_INTERFACES       1
+#define USBD_MAX_NUM_CONFIGURATION    1
+#define USBD_DESC_BUF_SIZE            192
 #define USBD_SUPPORT_USER_STRING_DESC 1
-#define USBD_SELF_POWERED            0
-#define DEVICE_FS                    0
+#define USBD_SELF_POWERED             0
+#define DEVICE_FS                     0
 
 #define USBD_ErrLog(...)

src/can.c

@@ -32,18 +32,32 @@ void can_init(can_data_t *hcan, CAN_TypeDef *instance)
 	__HAL_RCC_CAN1_CLK_ENABLE();
 
 	GPIO_InitTypeDef itd;
+#if defined(STM32F0)
 	itd.Pin = GPIO_PIN_8|GPIO_PIN_9;
 	itd.Mode = GPIO_MODE_AF_PP;
 	itd.Pull = GPIO_NOPULL;
 	itd.Speed = GPIO_SPEED_FREQ_HIGH;
 	itd.Alternate = GPIO_AF4_CAN;
 	HAL_GPIO_Init(GPIOB, &itd);
+#elif defined(STM32F4)
+	itd.Pin = GPIO_PIN_0|GPIO_PIN_1;
+	itd.Mode = GPIO_MODE_AF_PP;
+	itd.Pull = GPIO_NOPULL;
+	itd.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
+	itd.Alternate = GPIO_AF9_CAN1;
+	HAL_GPIO_Init(GPIOD, &itd);
+#endif
 
 	hcan->instance   = instance;
 	hcan->brp        = 6;
+	hcan->sjw		 = 1;
+#if defined(STM32F0)
 	hcan->phase_seg1 = 13;
 	hcan->phase_seg2 = 2;
-	hcan->sjw        = 1;
+#elif defined(STM32F4)
+	hcan->phase_seg1 = 12;
+	hcan->phase_seg2 = 1;
+#endif
 }
 
 bool can_set_bittiming(can_data_t *hcan, uint16_t brp, uint8_t phase_seg1, uint8_t phase_seg2, uint8_t sjw)

src/dfu.c

@@ -26,7 +26,7 @@ THE SOFTWARE.
 
 #include "dfu.h"
 #include <stdint.h>
-#include "stm32f0xx_hal.h"
+#include "hal_include.h"
 
 #define RESET_TO_BOOTLOADER_MAGIC_CODE 0xDEADBEEF
 

src/flash.c

@@ -27,7 +27,7 @@ THE SOFTWARE.
 
 #include "flash.h"
 #include <string.h>
-#include "stm32f0xx_hal_flash.h"
+#include "hal_include.h"
 
 #define NUM_CHANNEL 1
 
@@ -70,13 +70,24 @@ uint32_t flash_get_user_id(uint8_t channel)
 void flash_flush()
 {
 	FLASH_EraseInitTypeDef erase_pages;
+#if defined(STM32F0)
 	erase_pages.PageAddress = (uint32_t)&flash_data_rom;
 	erase_pages.NbPages = 1;
 	erase_pages.TypeErase = FLASH_TYPEERASE_PAGES;
+#elif defined(STM32F4)
+	erase_pages.VoltageRange = VOLTAGE_RANGE_3;
+	erase_pages.TypeErase = FLASH_TYPEERASE_SECTORS;
+	erase_pages.Sector = FLASH_SECTOR_7;
+	erase_pages.NbSectors = 1U;
+#endif
 
 	HAL_FLASH_Unlock();
+#if defined(STM32F0)
 	__HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP | FLASH_FLAG_WRPERR | FLASH_SR_PGERR);
-
+#elif defined(STM32F4)
+	__HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP | FLASH_FLAG_WRPERR | FLASH_FLAG_PGAERR |
+                           FLASH_FLAG_PGPERR | FLASH_FLAG_PGSERR);
+#endif
 	uint32_t error = 0;
 	HAL_FLASHEx_Erase(&erase_pages, &error);
 	if (error==0xFFFFFFFF) { // erase finished successfully

src/gpio.c

@@ -25,9 +25,9 @@ THE SOFTWARE.
 */
 
 #include "config.h"
-#include "stm32f0xx_hal.h"
+#include "hal_include.h"
 
-//must run before can_init
+// must run before can_init
 void gpio_init()
 {
 	GPIO_InitTypeDef GPIO_InitStruct;
@@ -35,6 +35,9 @@ void gpio_init()
 	__HAL_RCC_GPIOA_CLK_ENABLE();
 	__HAL_RCC_GPIOB_CLK_ENABLE();
 	__HAL_RCC_GPIOC_CLK_ENABLE();
+#if defined(STM32F4)
+	__HAL_RCC_GPIOD_CLK_ENABLE();
+#endif
 
 #ifdef CAN_S_Pin
 	HAL_GPIO_WritePin(CAN_S_GPIO_Port, CAN_S_Pin, GPIO_PIN_SET);
@@ -90,4 +93,14 @@ void gpio_init()
 	HAL_GPIO_Init(nSI86EN_Port, &GPIO_InitStruct);	//enable si86
 
 #endif // BOARD_cannette
+
+#if BOARD == BOARD_STM32F4_DevBoard
+    // initialize USB pins
+    GPIO_InitStruct.Pin = USB_Pin_DM | USB_Pin_DP;
+    GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
+    GPIO_InitStruct.Alternate = GPIO_AF10_OTG_FS;
+    HAL_GPIO_Init(USB_GPIO_Port, &GPIO_InitStruct);
+#endif
 }

src/interrupts.c

@@ -26,8 +26,7 @@ THE SOFTWARE.
 
 #include <stdint.h>
 #include <stddef.h>
-#include <stm32f0xx_hal.h>
-#include <stm32f0xx.h>
+#include "hal_include.h"
 
 void NMI_Handler(void)
 {
@@ -64,26 +63,26 @@ extern void Reset_Handler();
 typedef void(*pFunc)();
 extern uint32_t __StackTop;
 
-__attribute__((used, section(".vectors"))) 
-const pFunc InterruptVectorTable[48] =
-{
+#if defined(STM32F0)
+__attribute__((used, section(".vectors")))
+const pFunc InterruptVectorTable[48] = {
     (pFunc)(&__StackTop), // initial stack pointer
     Reset_Handler, // reset handler
     NMI_Handler, // -14: NMI
     HardFault_Handler, // -13: HardFault
-    0,
-    0,
-    0,
-    0,
-    0,
-    0,
-    0,
-    0, // -5: SVCall
-    0,
-    0,
+    0,                    // -12: MemManage_Handler
+    0,                    // -11: BusFault_Handler
+    0,                    // -10: UsageFault_Handler
+    0,                    //
+    0,                    //
+    0,                    //
+    0,                    //
+    0,                    // -5: SVC_Handler
+    0,                    // -4: DebugMon_Handler
+    0,                    //
     0, // -2: PendSV
     SysTick_Handler, // -1: SysTick
-
+// External Interrupts
     0, // int 0: WWDG
     0, // int 1: PVD
     0, // int 2: RTC
@@ -117,3 +116,95 @@ const pFunc InterruptVectorTable[48] =
     0, // int 30: CEC_CAN
     USB_Handler, // int 31: USB
 };
+
+#elif defined(STM32F4)
+__attribute__((used, section(".vectors")))
+const pFunc InterruptVectorTable[84] = {
+    (pFunc)(&__StackTop), // initial stack pointer
+    Reset_Handler,        // reset handler
+    NMI_Handler,          // -14: NMI
+    HardFault_Handler,    // -13: HardFault
+    0,                    // -12: MemManage_Handler
+    0,                    // -11: BusFault_Handler
+    0,                    // -10: UsageFault_Handler
+    0,                    //
+    0,                    //
+    0,                    //
+    0,                    //
+    0,                    // -5: SVC_Handler
+    0,                    // -4: DebugMon_Handler
+    0,                    //
+    0,                    // -2: PendSV
+    SysTick_Handler,      // -1: SysTick
+// External Interrupts
+    0,                    // int 0: WWDG
+    0,                    // int 1: PVD
+    0,                    // int 2: tamper and timestamp, EXTI line
+    0,                    // int 3: RTC
+    0,                    // int 4: FLASH
+    0,                    // int 5: RCC
+    0,                    // int 6: EXTI Line 0
+    0,                    // int 7: EXTI Line 1
+    0,                    // int 8: EXTI Line 2
+    0,                    // int 9: EXTI Line 3
+    0,                    // int 10: EXTI Line 4
+    0,                    // int 11: DMA Stream 0
+    0,                    // int 12: DMA Stream 1
+    0,                    // int 13: DMA Stream 2
+    0,                    // int 14: DMA Stream 3
+    0,                    // int 15: DMA Stream 4
+    0,                    // int 16: DMA Stream 5
+    0,                    // int 17: DMA Stream 6
+    0,                    // int 18: ADCs
+    0,                    // int 19: CAN1 TX
+    0,                    // int 20: CAN1 RX0
+    0,                    // int 21: CAN1 RX1
+    0,                    // int 22: CAN1 SCE
+    0,                    // int 23: External Line [9:5]s
+    0,                    // int 24: TIM1 Break and TIM9
+    0,                    // int 25: TIM1 Update and TIM10
+    0,                    // int 26: TIM1 Trigger and Commutation and TIM11
+    0,                    // int 27: TIM1 Capture Compare
+    0,                    // int 28: TIM2
+    0,                    // int 29: TIM3
+    0,                    // int 30: TIM4
+    0,                    // int 31: I2C1 Event
+    0,                    // int 32: I2C1 Error
+    0,                    // int 33: I2C2 Event
+    0,                    // int 34: I2C2 Error
+    0,                    // int 35: SPI1
+    0,                    // int 36: SPI2
+    0,                    // int 36: USART1
+    0,                    // int 37: USART2
+    0,                    // int 38: USART3
+    0,                    // int 39: External Line [15:10]s
+    0,                    // int 40: RTC Alarm (A and B), EXTI Line
+    0,                    // int 41: USB OTG FS Wakeup, EXTI Line
+    0,                    // int 42: TIM8 Break and TIM12
+    0,                    // int 43: TIM8 Update and TIM13
+    0,                    // int 44: TIM8 Trigger and Commutation and TIM14
+    0,                    // int 45: TIM8 Capture Compare
+    0,                    // int 46: DMA1 Stream7
+    0,                    // int 47: FSMC
+    0,                    // int 48: SDIO
+    0,                    // int 49: TIM5
+    0,                    // int 50: SPI3
+    0,                    // int 51: UART4
+    0,                    // int 52: UART5
+    0,                    // int 53: TIM6 and DAC1&2 underrun errors
+    0,                    // int 54: TIM7
+    0,                    // int 55: DMA2 Stream 0
+    0,                    // int 56: DMA2 Stream 1
+    0,                    // int 57: DMA2 Stream 2
+    0,                    // int 58: DMA2 Stream 3
+    0,                    // int 59: DMA2 Stream 4
+    0,                    // int 60: Ethernet
+    0,                    // int 61: Ethernet Wakeup, EXTI Line
+    0,                    // int 62: CAN2 TX
+    0,                    // int 63: CAN2 RX0
+    0,                    // int 64: CAN2 RX1
+    0,                    // int 65: CAN2 SCE
+    USB_Handler,          // int 66: USB OTG FS
+    // don't need to define any interrupts after this one
+};
+#endif

src/led.c

@@ -26,8 +26,7 @@ THE SOFTWARE.
 
 #include "led.h"
 #include <string.h>
-#include "stm32f0xx_hal.h"
-#include "stm32f0xx_hal_gpio.h"
+#include "hal_include.h"
 
 void led_init(
 	led_data_t *leds,

src/main.c

@@ -28,7 +28,7 @@ THE SOFTWARE.
 #include <string.h>
 
 #include "config.h"
-#include "stm32f0xx_hal.h"
+#include "hal_include.h"
 #include "usbd_def.h"
 #include "usbd_desc.h"
 #include "usbd_core.h"
@@ -73,23 +73,23 @@ int main(void)
 	led_init(&hLED, LED1_GPIO_Port, LED1_Pin, LED1_Active_High, LED2_GPIO_Port, LED2_Pin, LED2_Active_High);
 
 	/* nice wake-up pattern */
-    for(uint8_t i=0; i<10; i++)
-    {
-        HAL_GPIO_TogglePin(LED1_GPIO_Port, LED1_Pin);
-        HAL_Delay(50);
-        HAL_GPIO_TogglePin(LED2_GPIO_Port, LED2_Pin);
-    }
+	for(uint8_t i=0; i<10; i++)
+	{
+		HAL_GPIO_TogglePin(LED1_GPIO_Port, LED1_Pin);
+		HAL_Delay(50);
+		HAL_GPIO_TogglePin(LED2_GPIO_Port, LED2_Pin);
+	}
 
 	led_set_mode(&hLED, led_mode_off);
 	timer_init();
 
-	can_init(&hCAN, CAN);
+	can_init(&hCAN, CAN_INTERFACE);
 	can_disable(&hCAN);
 
 
 	q_frame_pool = queue_create(CAN_QUEUE_SIZE);
 	q_from_host  = queue_create(CAN_QUEUE_SIZE);
-	q_to_host    = queue_create(CAN_QUEUE_SIZE);
+	q_to_host	 = queue_create(CAN_QUEUE_SIZE);
 	assert_basic(q_frame_pool && q_from_host && q_to_host);
 
 	struct gs_host_frame *msgbuf = calloc(CAN_QUEUE_SIZE, sizeof(struct gs_host_frame));
@@ -179,6 +179,10 @@ int main(void)
 void HAL_MspInit(void)
 {
 	__HAL_RCC_SYSCFG_CLK_ENABLE();
+#if defined(STM32F4)
+	__HAL_RCC_PWR_CLK_ENABLE();
+	__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);
+#endif
 	HAL_NVIC_SetPriority(SysTick_IRQn, 0, 0);
 }
 
@@ -186,16 +190,19 @@ void SystemClock_Config(void)
 {
 	RCC_OscInitTypeDef RCC_OscInitStruct;
 	RCC_ClkInitTypeDef RCC_ClkInitStruct;
+
+#if defined(STM32F0)
 	RCC_PeriphCLKInitTypeDef PeriphClkInit;
-	RCC_CRSInitTypeDef RCC_CRSInitStruct;
+	RCC_CRSInitTypeDef       RCC_CRSInitStruct;
 
 	RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI48;
 	RCC_OscInitStruct.HSI48State = RCC_HSI48_ON;
 	RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE;
 	HAL_RCC_OscConfig(&RCC_OscInitStruct);
 
-	RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
-							  |RCC_CLOCKTYPE_PCLK1;
+	RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK |
+								  RCC_CLOCKTYPE_SYSCLK |
+								  RCC_CLOCKTYPE_PCLK1;
 	RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_HSI48;
 	RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
 	RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1;
@@ -206,7 +213,6 @@ void SystemClock_Config(void)
 	HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit);
 
 	__HAL_RCC_CRS_CLK_ENABLE();
-
 	RCC_CRSInitStruct.Prescaler = RCC_CRS_SYNC_DIV1;
 	RCC_CRSInitStruct.Source = RCC_CRS_SYNC_SOURCE_USB;
 	RCC_CRSInitStruct.Polarity = RCC_CRS_SYNC_POLARITY_RISING;
@@ -214,6 +220,27 @@ void SystemClock_Config(void)
 	RCC_CRSInitStruct.ErrorLimitValue = 34;
 	RCC_CRSInitStruct.HSI48CalibrationValue = 32;
 	HAL_RCCEx_CRSConfig(&RCC_CRSInitStruct);
+#elif defined(STM32F4)
+	RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
+	RCC_OscInitStruct.HSEState = RCC_HSE_ON;
+	RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
+	RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
+	RCC_OscInitStruct.PLL.PLLM = 4;
+	RCC_OscInitStruct.PLL.PLLN = 168;
+	RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2;
+	RCC_OscInitStruct.PLL.PLLQ = 7;
+	HAL_RCC_OscConfig(&RCC_OscInitStruct);
+
+	RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK |
+								  RCC_CLOCKTYPE_SYSCLK |
+								  RCC_CLOCKTYPE_PCLK1 |
+								  RCC_CLOCKTYPE_PCLK2;
+	RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
+	RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
+	RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4;
+	RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2;
+	HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_5);
+#endif
 
 	HAL_SYSTICK_Config(HAL_RCC_GetHCLKFreq()/1000);
 

src/timer.c

@@ -25,7 +25,7 @@ THE SOFTWARE.
 */
 
 #include "timer.h"
-#include "stm32f0xx_hal.h"
+#include "hal_include.h"
 
 void timer_init()
 {

src/usbd_conf.c

@@ -32,18 +32,27 @@ PCD_HandleTypeDef hpcd_USB_FS;
 
 void HAL_PCD_MspInit(PCD_HandleTypeDef* hpcd)
 {
-	if(hpcd->Instance==USB) {
+	if(hpcd->Instance==USB_INTERFACE) {
+
+#if defined(USB)
 		__HAL_RCC_USB_CLK_ENABLE();
-		HAL_NVIC_SetPriority(USB_IRQn, 1, 0);
-		HAL_NVIC_EnableIRQ(USB_IRQn);
+#elif defined(USB_OTG_FS)
+		__HAL_RCC_USB_OTG_FS_CLK_ENABLE();
+#endif
+		HAL_NVIC_SetPriority(USB_INTERRUPT, 1, 0);
+		HAL_NVIC_EnableIRQ(USB_INTERRUPT);
 	}
 }
 
 void HAL_PCD_MspDeInit(PCD_HandleTypeDef* hpcd)
 {
-	if(hpcd->Instance==USB) {
+	if(hpcd->Instance==USB_INTERFACE) {
+#if defined(USB)
 		__HAL_RCC_USB_CLK_DISABLE();
-		HAL_NVIC_DisableIRQ(USB_IRQn);
+#elif defined(USB_OTG_FS)
+		__HAL_RCC_USB_OTG_FS_CLK_DISABLE();
+#endif
+		HAL_NVIC_DisableIRQ(USB_INTERRUPT);
 	}
 }
 
@@ -105,15 +114,22 @@ USBD_StatusTypeDef USBD_LL_Init(USBD_HandleTypeDef *pdev)
 	hpcd_USB_FS.pData = pdev;
 	pdev->pData = &hpcd_USB_FS;
 
-	hpcd_USB_FS.Instance = USB;
-	hpcd_USB_FS.Init.dev_endpoints = 5;
+	hpcd_USB_FS.Instance = USB_INTERFACE;
+	hpcd_USB_FS.Init.dev_endpoints = 5U;
 	hpcd_USB_FS.Init.speed = PCD_SPEED_FULL;
 	hpcd_USB_FS.Init.ep0_mps = EP_MPS_64;
 	hpcd_USB_FS.Init.phy_itface = PCD_PHY_EMBEDDED;
 	hpcd_USB_FS.Init.low_power_enable = DISABLE;
 	hpcd_USB_FS.Init.lpm_enable = DISABLE;
+#if defined(STM32F4)
+	hpcd_USB_FS.Init.dma_enable = DISABLE;
+	hpcd_USB_FS.Init.Sof_enable = DISABLE;
+	hpcd_USB_FS.Init.vbus_sensing_enable = DISABLE;
+	hpcd_USB_FS.Init.use_dedicated_ep1 = DISABLE;
+#endif
 	HAL_PCD_Init(&hpcd_USB_FS);
 
+
 	/*
 	* PMA layout
 	*  0x00 -  0x17 (24 bytes) metadata?
@@ -123,10 +139,17 @@ USBD_StatusTypeDef USBD_LL_Init(USBD_HandleTypeDef *pdev)
 	*  0xD8 - 0x157 (128 bytes) EP1 OUT (buffer 1)
 	* 0x158 - 0x1D7 (128 bytes) EP1 OUT (buffer 2)
 	*/
-	HAL_PCDEx_PMAConfig((PCD_HandleTypeDef*)pdev->pData , 0x00 , PCD_SNG_BUF, 24);
+#if defined(USB)
+	HAL_PCDEx_PMAConfig((PCD_HandleTypeDef*)pdev->pData , 0x00 , PCD_SNG_BUF, 0x18);
 	HAL_PCDEx_PMAConfig((PCD_HandleTypeDef*)pdev->pData , 0x80 , PCD_SNG_BUF, 0x58);
 	HAL_PCDEx_PMAConfig((PCD_HandleTypeDef*)pdev->pData , 0x81 , PCD_SNG_BUF, 0x98);
 	HAL_PCDEx_PMAConfig((PCD_HandleTypeDef*)pdev->pData , 0x02 , PCD_DBL_BUF, 0x00D80158);
+#elif defined(USB_OTG_FS)
+	HAL_PCDEx_SetRxFiFo((PCD_HandleTypeDef*)pdev->pData, USB_RX_FIFO_SIZE); // shared RX FIFO
+	HAL_PCDEx_SetTxFiFo((PCD_HandleTypeDef*)pdev->pData, 0U, 64U / 4U);     // 0x80, 64 bytes (div by 4 for words)
+	HAL_PCDEx_SetTxFiFo((PCD_HandleTypeDef*)pdev->pData, 1U, 64U / 4U);     // 0x81, 64 bytes (div by 4 for words)
+
+#endif
 
 	return USBD_OK;
 }

src/usbd_gs_can.c

@@ -28,7 +28,7 @@ THE SOFTWARE.
 #include "config.h"
 #include <stdlib.h>
 #include <string.h>
-#include "stm32f0xx_hal.h"
+#include "hal_include.h"
 #include "usbd_desc.h"
 #include "usbd_ctlreq.h"
 #include "usbd_ioreq.h"
@@ -271,7 +271,7 @@ static const struct gs_device_bt_const USBD_GS_CAN_btconst = {
 	| GS_CAN_FEATURE_IDENTIFY
 	| GS_CAN_FEATURE_USER_ID
 	| GS_CAN_FEATURE_PAD_PKTS_TO_MAX_PKT_SIZE,
-	48000000, // can timing base clock
+	CAN_CLOCK_SPEED, // can timing base clock
 	1, // tseg1 min
 	16, // tseg1 max
 	1, // tseg2 min